Month: July 2024
A user is unable to sign into outlook
Hello
Please i need your help on this issue.
A user is unable to sign into outlook error says you cannot access this right now Your sign-in was successful but does not meet the criteria to access this resource.
Hello Please i need your help on this issue. A user is unable to sign into outlook error says you cannot access this right now Your sign-in was successful but does not meet the criteria to access this resource. Read More
sql server agent
I have a simple SSIS package that copies files from one directory to another. It works fine when run from Visual Studio. Although when I add the package to the SSIS catalog and schedule it via a SQL Server Agent job the files do not get copied over. The job history is showing no errors
I have a simple SSIS package that copies files from one directory to another. It works fine when run from Visual Studio. Although when I add the package to the SSIS catalog and schedule it via a SQL Server Agent job the files do not get copied over. The job history is showing no errors Read More
My Excel macro works differently at work than home.
Hello everyone.
I have a Excel macro that seems to work perfect at home however at my work PC I get a run time error 13. When I look at the VBA it highlights an error with my: rng/Value ….
MY goal of this sheet is to enter a begin and end date, this will provide a series of 1 to 7 values based on those dates. Only the values would be shown and the others not applicable would be hidden, which this also applies to the tabs .
I will also note, my old workstation worked flawlessly though that needed an update from our tech support. Now that I have transferred, I am worried if my employer wants to use this Excel sheet, the entire department will need an update.
Any advice? Thank you in advance for your time and support.
Hello everyone. I have a Excel macro that seems to work perfect at home however at my work PC I get a run time error 13. When I look at the VBA it highlights an error with my: rng/Value …. MY goal of this sheet is to enter a begin and end date, this will provide a series of 1 to 7 values based on those dates. Only the values would be shown and the others not applicable would be hidden, which this also applies to the tabs . I will also note, my old workstation worked flawlessly though that needed an update from our tech support. Now that I have transferred, I am worried if my employer wants to use this Excel sheet, the entire department will need an update. Any advice? Thank you in advance for your time and support. Read More
Find in document working but COUNTIF is not.
Hi Community,
I am exporting keyword data out of Google Ads into Excel. I am trying to use the countif function to count
the number of occurrences of specific search words like “AI.” =COUNTIF(A4:A437, “ai”). The individual cells
in the range sometimes contain multiple search words like “ai replace photo editor”. The data is not clean in
that respect. When I use the search tool in the top right of the screen and type in “ai,” it finds every occurrence,
but I can’t count and display them in a cell automatically.
When I use the CountIf function the result is always “1”. I’ve tried COUNTIFS and get the same result.
I’ve attached some sample data here. Why does it work in “Search” and not in “COUNTIF”?
=COUNTIF(A3:A100, “ai”)Negative keywordKeyword or list
photoshop online free editing
Keywordhow to photograph hats for ecommerceKeywordblur photo to clear photo websiteKeywordanalyse photo en ligneKeywordreplicate delivery photoKeywordسایت زیبا سازی عکسKeywordبرنامه ادیت عکس با هوش مصنوعیKeywordحذف اشیا از عکس آنلاینKeywordهوش مصنوعی بازسازی عکسKeywordai photo blur remover freeKeywordسایت هوش مصنوعی عکسKeywordادیت عکس با هوش مصنوعی انلاینKeywordترمیم عکس قدیمی با هوش مصنوعیKeywordsnapedit photo enhancerKeywordai replace photo editorKeywordai for edit photoKeywordai photo editing backgroundKeywordblur to clear image aiKeywordrestorephotos ioKeywordai photo correction freeKeywordai edit picKeywordai outpaintingKeywordmake pictures clearKeywordai photo removerKeywordunblur pictures online freeKeywordتحسين صور بالذكاء الاصطناعيKeywordauto focus photoKeyworderase object from photo onlineKeywordremini onlineKeywordimage blur removerKeywordai remove text from imageKeywordclear photo quality onlineKeywordai image enhancerKeywordai retouchKeywordphoto face cleanKeywordretouch academy panelKeywordobject removerKeywordremove object from photo online freeKeywordai imageKeywordremove image from photoKeywordunblur imageKeywordeditor de imagen onlineKeywordتوضيح الصور اون لاينKeywordPronunciationKeywordclear blurred imageKeywordremove text from imageKeywordnettoyage photoKeywordphoto clearKeywordfotor comKeywordonline retouch photoKeywordphoto enhancerKeywordDiyKeywordDo-it-yourselfKeywordLessonKeywordToolKeywordDo It YourselfKeywordHistoryKeywordHiringKeywordJobKeywordface object removerKeywordترمیم عکس قدیمی آنلاین رایگانKeywordai remove text from picture online freeKeywordسایت ادیت عکس با هوش مصنوعیKeywordai dress remover websiteKeywordairbrush ai photoKeywordimagin iaKeywordmake blurry photo clear online freeKeywordai beauty photoKeywordreplicate com photoKeywordremove blur from image aiKeywordai photo text enhancerKeywordai bg object removerKeywordphotoeditor aiKeywordسایت ادیت خودکار عکسKeywordai photo recoveryKeywordmake my photo talk freeKeywordeditar cara en fotosKeywordsubir calidad de imagen online gratisKeywordai photo face enhancerKeywordai photo fixerKeywordpic cleaner onlineKeywordai picture editorKeywordfix out of focus photoKeywordimage cleaner online freeKeywordmejorar la calidad de una foto onlineKeywordسایت fotorKeywordold photo color restoration online freeKeywordclear photo online freeKeywordremove person from photo online freeKeywordremove text from picture online freeKeywordbeautify photo onlineKeywordremove blurriness from photosKeywordmejorar calidad de imagenKeywordOccupationsKeywordsites para editar fotos gratisKeywordclean up picturesKeywordenhance photosKeyword
Hi Community, I am exporting keyword data out of Google Ads into Excel. I am trying to use the countif function to countthe number of occurrences of specific search words like “AI.” =COUNTIF(A4:A437, “ai”). The individual cellsin the range sometimes contain multiple search words like “ai replace photo editor”. The data is not clean inthat respect. When I use the search tool in the top right of the screen and type in “ai,” it finds every occurrence,but I can’t count and display them in a cell automatically.When I use the CountIf function the result is always “1”. I’ve tried COUNTIFS and get the same result.I’ve attached some sample data here. Why does it work in “Search” and not in “COUNTIF”? =COUNTIF(A3:A100, “ai”)Negative keywordKeyword or listphotoshop online free editingKeywordhow to photograph hats for ecommerceKeywordblur photo to clear photo websiteKeywordanalyse photo en ligneKeywordreplicate delivery photoKeywordسایت زیبا سازی عکسKeywordبرنامه ادیت عکس با هوش مصنوعیKeywordحذف اشیا از عکس آنلاینKeywordهوش مصنوعی بازسازی عکسKeywordai photo blur remover freeKeywordسایت هوش مصنوعی عکسKeywordادیت عکس با هوش مصنوعی انلاینKeywordترمیم عکس قدیمی با هوش مصنوعیKeywordsnapedit photo enhancerKeywordai replace photo editorKeywordai for edit photoKeywordai photo editing backgroundKeywordblur to clear image aiKeywordrestorephotos ioKeywordai photo correction freeKeywordai edit picKeywordai outpaintingKeywordmake pictures clearKeywordai photo removerKeywordunblur pictures online freeKeywordتحسين صور بالذكاء الاصطناعيKeywordauto focus photoKeyworderase object from photo onlineKeywordremini onlineKeywordimage blur removerKeywordai remove text from imageKeywordclear photo quality onlineKeywordai image enhancerKeywordai retouchKeywordphoto face cleanKeywordretouch academy panelKeywordobject removerKeywordremove object from photo online freeKeywordai imageKeywordremove image from photoKeywordunblur imageKeywordeditor de imagen onlineKeywordتوضيح الصور اون لاينKeywordPronunciationKeywordclear blurred imageKeywordremove text from imageKeywordnettoyage photoKeywordphoto clearKeywordfotor comKeywordonline retouch photoKeywordphoto enhancerKeywordDiyKeywordDo-it-yourselfKeywordLessonKeywordToolKeywordDo It YourselfKeywordHistoryKeywordHiringKeywordJobKeywordface object removerKeywordترمیم عکس قدیمی آنلاین رایگانKeywordai remove text from picture online freeKeywordسایت ادیت عکس با هوش مصنوعیKeywordai dress remover websiteKeywordairbrush ai photoKeywordimagin iaKeywordmake blurry photo clear online freeKeywordai beauty photoKeywordreplicate com photoKeywordremove blur from image aiKeywordai photo text enhancerKeywordai bg object removerKeywordphotoeditor aiKeywordسایت ادیت خودکار عکسKeywordai photo recoveryKeywordmake my photo talk freeKeywordeditar cara en fotosKeywordsubir calidad de imagen online gratisKeywordai photo face enhancerKeywordai photo fixerKeywordpic cleaner onlineKeywordai picture editorKeywordfix out of focus photoKeywordimage cleaner online freeKeywordmejorar la calidad de una foto onlineKeywordسایت fotorKeywordold photo color restoration online freeKeywordclear photo online freeKeywordremove person from photo online freeKeywordremove text from picture online freeKeywordbeautify photo onlineKeywordremove blurriness from photosKeywordmejorar calidad de imagenKeywordOccupationsKeywordsites para editar fotos gratisKeywordclean up picturesKeywordenhance photosKeyword Read More
What’s New in Microsoft Teams | July 2024
Welcome to July’s update on Microsoft Teams, where we share some of the new features and improvements that are making collaboration easier and more enjoyable. This month, we have exciting enhancements for your meetings, chats, and communications that will help you personalize your experience, stay organized, and express yourself better. For example, you can now use custom emojis and reactions to express yourself and reflect your team’s culture. You can also enjoy a more engaging and inclusive meeting experience with the new meeting gallery, which places all participants in equal-sized tiles and can automatically highlight certain participants to enhance the meeting experience. And for Teams Rooms on Windows, you can benefit from speaker attribution enhancements, enabling Copilot and meeting recaps to understand who said what in recaps and insights. These are just some of the highlights that I’m most excited about, but there’s much more to explore in this update.
Meetings, Mesh in Teams, Webinars, and Town Halls
Chat and Collaboration
Custom emojis and reactions
Bring more creativity and expression into your conversations with custom emojis and reactions. Upload your own custom emojis or reactions to personalize the conversation, reflect your team’s culture, efficiently share status, or share a lighthearted reaction. Once uploaded, custom emojis can only be used within the user’s tenant, but once they are sent, they are visible to all members of the chat. IT admins can decide who has permission to create custom emojis, delete custom emojis, or turn off the capability altogether. Learn more.
Search result suggestions
Enhance your search experience with message suggestions. As you type in the search bar, you’ll see recent chat message suggestions pop up along with other type of search results, helping you find relevant messages quickly. These suggestions include details such as the sender’s name and profile picture, the context of the message, the date it was sent, and icons indicating the presence of web-links or file attachments. This new feature streamlines your search, making it easier to locate the exact message you need.
Enhanced sound notification controls
Stay focused, prioritize quickly, and avoid distractions by customizing the sound of your notifications. Go to Settings-> Notifications and activity tab, and under Sound assign different sounds to different kinds of notifications, such as urgent messages and priority contacts. Or mute notification sounds when you are busy or in a meeting. Tailor your notification experience to help you stay on top of what matters most.
Turn on/off notifications for a channel post
Stay in control of your Teams notifications by turning on or off notifications for a specific channel post. Tailor your notification preferences, ensuring that you stay informed on topics important to you. To manage notifications, click on the ellipsis (three-dot menu) in the top right corner of a post. If you are following the post, you will see “Turn off notifications.” If you are not following, you will see “Turn on notifications.”
Teams cross-cloud guest access on web
We are extending existing guest access functionality to the web, allowing guests between tenants across Microsoft clouds who access the Teams app from the browser to participate in rich collaboration experiences in chat, meetings, channels, and teams. Guests can participate in a full collaboration experience including audio/video, screen share, file share and both 1:1 and 1:many chat. Admins can establish trust between tenants and across the Microsoft clouds via Entra B2B and Cross Tenant Access Settings.
Meetings, Mesh in Teams, Webinars, and Town Halls
Meetings: New meeting gallery in Teams meetings
The new meeting gallery provides you with a simpler, more predictable meeting presence, while enabling you to personalize the view to suit your needs. The new gallery places everyone in tiles of equal size whether their camera is turned on or off. While the default gallery size is 16 participants, you can customize the number of participants visible on your screen (up to 49) to best fit your preference. The new meeting gallery will automatically optimize the visibility of certain participants to improve meeting engagement, like those with a raised hand and active speakers. You can also choose to prioritize participants who are on camera to better connect with your teams. Additional customizable views available in the new meeting gallery include the ability to hide yourself from the main gallery or remove yourself from the main gallery (only visible to you). The new gallery experience in Teams meetings is now available.
When a Teams Room joins a Teams meeting, the video tile of the room automatically enlarges, offering a more inclusive experience for participants who are joining online. Remote attendees now have a clearer view into the room and can more easily spot who is speaking. To adjust the tile size, simply choose your preference from the more options (…) menu by hovering on the room name.
Events: Presenter orderability on event page in webinars
Event organizers can now customize the list of presenters in the webinar event page via drag and drop functionality to mirror the intended order of presenters within a given event. This option can be found under the “Presenter Bio” section of the webinar set-up dialog box and can be customized until the start of the event.
Events: Manage what attendees see updates for town hall and webinars
It is now easier for event organizers to toggle presenters on and off during town hall events and webinars in the Manage screen. Presenters will now have a “live” indicator on their video feed when they have been brought on screen. Toggle the indicator off to remove their video from the event. This feature can accommodate up to seven presenters at a time. “Manage what attendees see” functionality and control is included in all Teams licenses for town hall and requires a Teams Premium license for webinars.
Events: Town hall events in Government Community Cloud (GCC)
Government users can now set up and host large scale events across a GCC organization with the familiar Teams app using town hall. Town hall capabilities in GCC include a new meeting template, capacity for up to 20,000 attendees, third-party eCDN support, green room access, the ability to “manage what attendees see,” RTMP-in, live translated captions, and more. Moderated Q&A will also be available in the near future. GCC will be available in Teams and Teams Premium.
Microsoft Mesh: Event templates in Teams Premium
Events organizers no longer need to create each new event from scratch. Organizers can now use turnkey event templates to quickly create an event with the capabilities they need already configured. The first two templates available are the Meadow and Oasis environments with the screenshare object included in both. The Meadow environment is a larger, more open environment for experiences like few-to-many events, while Oasis is a good fit for small to medium meetings and presentations. Both environments come with a screenshare panel already placed and ready to display content.Further customization is always possible via the Mesh app to add additional content like videos, images, or text too. Event templates are available in Teams Premium.
Microsoft Mesh: Revisit event links in Teams Premium
A much-awaited feature for events is now available. Use past links you’ve received when you created your event, or share the link with others, to rejoin old events. Simply select the link to open the Mesh application and rejoin your past events. The ability to revisit previous event links is available in Teams Premium.
Microsoft Mesh: More avatar reactions
New avatar reactions allow users to be more expressive. Avatar reactions allow attendees and presenters to gauge how events and meetings, and their content, are being received by participants. The additional avatar reactions can be played in immersive space (3D) view in Teams and in Mesh events.
Microsoft Mesh: Avatar personal boundary
Avatars now have a personal boundary to prevent other people from walking through avatars or standing too close. This helps to increase comfort and safety while in immersive spaces. Avatar personal boundary is available in all Mesh experiences.
Teams Rooms and Devices
Find certified for Teams devices for all types of spaces and uses at aka.ms/teamsdevices.
Speaker recognition and Copilot benefits for all Teams Rooms on Windows
Now, everyone, regardless of microphone types in the room, can benefit from precise speaker attribution in transcripts in Teams Rooms on Windows. With this update, everyone can benefit from detailed meeting recaps and use Copilot, so they can find out who said what and get insightful responses to queries. Microsoft’s cloud-based intelligent speaker recognition analyzes the distinct vocal characteristics of each speaker, such as pitch, tone, and speaking style. First brought to Teams Rooms on Windows, the feature will expand to Teams Rooms on Android devices and the Teams desktop for bring your own device (BYOD) meeting spaces later this year.
IT admins can learn more on activating voice profiles and enhancing the Teams meetings experience with Copilot at aka.ms/speakerecblog. Users can quickly create their voice profile at aka.ms.voiceprofile.
Sennheiser TeamConnect Bar M
Newly certified for Teams, the TeamConnect Bar M is a feature-rich, all-in-one device for mid-sized meeting rooms and collaboration spaces. The TC Bar M includes six microphones and four speakers to deliver Sennheiser audio quality to every meeting. Integrated beamforming technology enables freedom of movement and seamless transitions between presenters, and is complemented by advanced AI video features such as auto-framing and person tiling. The flexibility and audio clarity of TeamConnect Bar Solutions facilitate high-quality experiences for everyone, whether they are in-room or remote. Learn more.
Jabra PanaCast 50
Newly certified for Teams, the Jabra PanaCast 50 intelligent camera supports Microsoft Multi-stream IntelliFrame and features a unique 180° field of view. This provides a panoramic view and close-ups of recent speakers. People recognition technology creates a more inclusive environment by identifying individuals, displaying their names in the meeting roster, and name tagging them on the Teams meeting stage. Combined with intelligent speaker capabilities, the Jabra PanaCast 50 delivers the best AI integration for both end users and IT admins. Learn more.
Yealink WH64 Headset
Newly certified for Teams, the Yealink WH64 Headset is designed for modern professionals who need flexibility and comfort. This headset features wireless technology, catering to flexible working styles, and its ergonomic design provides all-day comfort.
Teams Phone
Explicit consent recording meeting policy support on Teams phone devices
A pop-up notification will appear on your certified Teams phone device when someone starts a recording or transcription, allowing you to accept or decline. This feature is turned off by default but can be enabled by admins in the Team admin center. No content will be captured without consent. Learn more.
Private line on Teams phone devices
Have a dedicated secondary phone number for incoming calls that only select callers can use to reach you directly, without going through delegates, administrators, or assistants. Calls received to your private line can now be received on either the Teams desktop app or a certified phone device. Configure private lines with PowerShell, and easily distinguish the call with a unique notification. Learn more.
Updated People app on Teams phone devices
Manage your contacts more easily and quickly on Teams phone devices with the People app. This update allows you to seamlessly switch between different contact lists and create contact groups. Learn more.
Detailed call history on Teams phone devices
Easily keep track of your calls and see how they are handled. You can see if a call was ignored, missed, or forwarded, and what type of call it was, with clear labeling for different call types. To access your call history, navigate to the Calls tab on your Teams phone device. Learn more.
Call transfer improvements on Teams phone devices
Transfer calls more easily and efficiently. You can access your speed dials during transfer, avoid keyboard overlap on touch phones, and use hard keys on non-touch phones to complete the transfer. Learn more.
Move ongoing calls from the Teams app to the native dialer on your mobile device
Teams Phone Mobile enables you to have a single number as your Teams number and mobile number for flexible, reliable, and secure calling, across locations and devices. As a Teams Phone Mobile user, you can now effortlessly switch an active call from the Teams app to your mobile device’s native dialer, ensuring a smooth and uninterrupted call experience.
Microsoft Tech Community – Latest Blogs –Read More
can I use custom libraries (dlls) written for matlab with Thingspeak
I have developed some custom libraries (dlls written in C++) that I call and use in analysis using desktop Matlab.
Is there a way to use these libraries with thingspeak ?
Are there any alternatives or workarounds that would serve the same purpose.I have developed some custom libraries (dlls written in C++) that I call and use in analysis using desktop Matlab.
Is there a way to use these libraries with thingspeak ?
Are there any alternatives or workarounds that would serve the same purpose. I have developed some custom libraries (dlls written in C++) that I call and use in analysis using desktop Matlab.
Is there a way to use these libraries with thingspeak ?
Are there any alternatives or workarounds that would serve the same purpose. thingspeak, custom dlls, custom libraries MATLAB Answers — New Questions
VideoReader missing codec problem
I cannot open avi files with VideoReader on my MacBook (OS Ventura 13.5) with a pretty up-to-date version of MATLAB (R2023b; 23.2.0.2365128, 64-bit). When I try to open an avi file with the following code
v = VideoReader(vidFileName.avi)
I get the following error
Error using VideoReader/initReader
Unable to determine the required codec.
Error in audiovideo.internal.IVideoReader (line 136)
initReader(obj, fileName, currentTime);
Error in VideoReader (line 104)
obj@audiovideo.internal.IVideoReader(varargin{:});
Similarly, if I try to get information about the avi file, the code
info = mmfileinfo(vidFileName.avi)
returns the error
Unable to determine the required codec.
Some important points:
Yes, I know other people have posted similar problems. No clear solution to my problem is found there
Yes, this video file is valid and uncorrupted. It plays fine on VLC Player. It does not play on QuickTime, which does not support the avi format
Yes, I am aware that the solution might be "installing new codecs"–a solution mentioned in some other posts–but I need more information than that
Here’s the deal: The MATLAB Central "solutions" mention installing codecs from mediaplayercodecpack.com…but that only support Windows systems. I tried installing 3rd party Mac codecs from 3ivx.com, but they didn’t work. FWIW, they didn’t allow QT to play avi files either, as it was supposed to do. I know nothing about video codecs, but teh interwebs tell me they are usually stored in Library/QuickTime on Macs. Sure enough, the 3ivx installation did add "3ivxVideoCodec.component" to that folder, but again, it doesn’t work. The fact that VLC Player does work suggests that the necessary codec does exist somewhere on my Mac, but apparently MATLAB can’t use it.
In closing, I pose these fundamental questions: Doesn’t the MATLAB installation include the video codes required for the video formats VideoReader/VideoWriter supposedly supports? If yes, why am I getting this probelm? If no, where do I find the relevant codecs and how do I install them in a way that MATLAB can use?I cannot open avi files with VideoReader on my MacBook (OS Ventura 13.5) with a pretty up-to-date version of MATLAB (R2023b; 23.2.0.2365128, 64-bit). When I try to open an avi file with the following code
v = VideoReader(vidFileName.avi)
I get the following error
Error using VideoReader/initReader
Unable to determine the required codec.
Error in audiovideo.internal.IVideoReader (line 136)
initReader(obj, fileName, currentTime);
Error in VideoReader (line 104)
obj@audiovideo.internal.IVideoReader(varargin{:});
Similarly, if I try to get information about the avi file, the code
info = mmfileinfo(vidFileName.avi)
returns the error
Unable to determine the required codec.
Some important points:
Yes, I know other people have posted similar problems. No clear solution to my problem is found there
Yes, this video file is valid and uncorrupted. It plays fine on VLC Player. It does not play on QuickTime, which does not support the avi format
Yes, I am aware that the solution might be "installing new codecs"–a solution mentioned in some other posts–but I need more information than that
Here’s the deal: The MATLAB Central "solutions" mention installing codecs from mediaplayercodecpack.com…but that only support Windows systems. I tried installing 3rd party Mac codecs from 3ivx.com, but they didn’t work. FWIW, they didn’t allow QT to play avi files either, as it was supposed to do. I know nothing about video codecs, but teh interwebs tell me they are usually stored in Library/QuickTime on Macs. Sure enough, the 3ivx installation did add "3ivxVideoCodec.component" to that folder, but again, it doesn’t work. The fact that VLC Player does work suggests that the necessary codec does exist somewhere on my Mac, but apparently MATLAB can’t use it.
In closing, I pose these fundamental questions: Doesn’t the MATLAB installation include the video codes required for the video formats VideoReader/VideoWriter supposedly supports? If yes, why am I getting this probelm? If no, where do I find the relevant codecs and how do I install them in a way that MATLAB can use? I cannot open avi files with VideoReader on my MacBook (OS Ventura 13.5) with a pretty up-to-date version of MATLAB (R2023b; 23.2.0.2365128, 64-bit). When I try to open an avi file with the following code
v = VideoReader(vidFileName.avi)
I get the following error
Error using VideoReader/initReader
Unable to determine the required codec.
Error in audiovideo.internal.IVideoReader (line 136)
initReader(obj, fileName, currentTime);
Error in VideoReader (line 104)
obj@audiovideo.internal.IVideoReader(varargin{:});
Similarly, if I try to get information about the avi file, the code
info = mmfileinfo(vidFileName.avi)
returns the error
Unable to determine the required codec.
Some important points:
Yes, I know other people have posted similar problems. No clear solution to my problem is found there
Yes, this video file is valid and uncorrupted. It plays fine on VLC Player. It does not play on QuickTime, which does not support the avi format
Yes, I am aware that the solution might be "installing new codecs"–a solution mentioned in some other posts–but I need more information than that
Here’s the deal: The MATLAB Central "solutions" mention installing codecs from mediaplayercodecpack.com…but that only support Windows systems. I tried installing 3rd party Mac codecs from 3ivx.com, but they didn’t work. FWIW, they didn’t allow QT to play avi files either, as it was supposed to do. I know nothing about video codecs, but teh interwebs tell me they are usually stored in Library/QuickTime on Macs. Sure enough, the 3ivx installation did add "3ivxVideoCodec.component" to that folder, but again, it doesn’t work. The fact that VLC Player does work suggests that the necessary codec does exist somewhere on my Mac, but apparently MATLAB can’t use it.
In closing, I pose these fundamental questions: Doesn’t the MATLAB installation include the video codes required for the video formats VideoReader/VideoWriter supposedly supports? If yes, why am I getting this probelm? If no, where do I find the relevant codecs and how do I install them in a way that MATLAB can use? video, codec, mac, matlab MATLAB Answers — New Questions
Efficient management of interacting atoms based on their mutual distance
Dear all
Currently, I am dealing with a dataset, which I attach here in the "File.txt", file, where the first column is an atomic label ranging from 0 to 95900 (that it is, to the number of atoms-1). Each row represents the spatial coordinates of each i-th atom of the system, denoting the second, third, and fourth columns the coordinate values, in Angstroms, along x-, y-, and z-th directions. It is important to note that the fourth column, that it is, the z-th spatial coordinate, only can have two different values, 3.27645 and 9.82515. So basically, I have two monolayers at two different heights.
My goal is, for each atom, to loop over the first ten nearest interlayer atoms. That it is, for the i-th atom, to loop over the atoms with the lowest deviations in the xy plane from (xi,yi) and with different value of the z-th component. Importantly, if, for example, during the looping one founds that atom with id 4 and 560 have in common the atom with 1100 as one of the ten nearest neighbors to them, it would be very desirable that when looping in for 1100, the program knows, from the previous calculations, that atoms with label 4 and 560 are indeed two of the ten nearest neighbors to 1100.
I had in mind something like:
file=readmatrix(‘File.txt’);
counter=0;
for i=1:length(file(:,1))
indices=file(file(:,4)~=file(i,4));
atoms=file(indices,1:3);
for j=1:length(indices)
distances(j)=norm(atoms(j,2:3)-file(i,2:3)); % Angstroms
end
sorted_distances=unique(distances); % Angstroms
interacting_distances=sorted_distances(1:10); % Angstroms
interacting_atoms=find(distances<=max(interacting_distances));
for j=1:length(interacting_atoms(:,1))
counter=counter+1;
interaction_list(counter,1)=file(i,1); % i-th atom id
interaction_list(counter,2)=interacting_atoms(j,1); % j-th atom id
interaction_list(counter,3)=somevalue;
end
clear indices distances sorted_distances interacting_distances interacting_atoms
end
Obviously, this approach does not seem to be very fast/efficient. Also, this won’t meet one of the requirements I explained above: that if one finds that i-th atom interacts with j-th atom, one knows that j-th atom interacts with i-th atom (double counting). In that case, I would need to save in the interaction_list(counter,3)=-somevalue.
Any idea?Dear all
Currently, I am dealing with a dataset, which I attach here in the "File.txt", file, where the first column is an atomic label ranging from 0 to 95900 (that it is, to the number of atoms-1). Each row represents the spatial coordinates of each i-th atom of the system, denoting the second, third, and fourth columns the coordinate values, in Angstroms, along x-, y-, and z-th directions. It is important to note that the fourth column, that it is, the z-th spatial coordinate, only can have two different values, 3.27645 and 9.82515. So basically, I have two monolayers at two different heights.
My goal is, for each atom, to loop over the first ten nearest interlayer atoms. That it is, for the i-th atom, to loop over the atoms with the lowest deviations in the xy plane from (xi,yi) and with different value of the z-th component. Importantly, if, for example, during the looping one founds that atom with id 4 and 560 have in common the atom with 1100 as one of the ten nearest neighbors to them, it would be very desirable that when looping in for 1100, the program knows, from the previous calculations, that atoms with label 4 and 560 are indeed two of the ten nearest neighbors to 1100.
I had in mind something like:
file=readmatrix(‘File.txt’);
counter=0;
for i=1:length(file(:,1))
indices=file(file(:,4)~=file(i,4));
atoms=file(indices,1:3);
for j=1:length(indices)
distances(j)=norm(atoms(j,2:3)-file(i,2:3)); % Angstroms
end
sorted_distances=unique(distances); % Angstroms
interacting_distances=sorted_distances(1:10); % Angstroms
interacting_atoms=find(distances<=max(interacting_distances));
for j=1:length(interacting_atoms(:,1))
counter=counter+1;
interaction_list(counter,1)=file(i,1); % i-th atom id
interaction_list(counter,2)=interacting_atoms(j,1); % j-th atom id
interaction_list(counter,3)=somevalue;
end
clear indices distances sorted_distances interacting_distances interacting_atoms
end
Obviously, this approach does not seem to be very fast/efficient. Also, this won’t meet one of the requirements I explained above: that if one finds that i-th atom interacts with j-th atom, one knows that j-th atom interacts with i-th atom (double counting). In that case, I would need to save in the interaction_list(counter,3)=-somevalue.
Any idea? Dear all
Currently, I am dealing with a dataset, which I attach here in the "File.txt", file, where the first column is an atomic label ranging from 0 to 95900 (that it is, to the number of atoms-1). Each row represents the spatial coordinates of each i-th atom of the system, denoting the second, third, and fourth columns the coordinate values, in Angstroms, along x-, y-, and z-th directions. It is important to note that the fourth column, that it is, the z-th spatial coordinate, only can have two different values, 3.27645 and 9.82515. So basically, I have two monolayers at two different heights.
My goal is, for each atom, to loop over the first ten nearest interlayer atoms. That it is, for the i-th atom, to loop over the atoms with the lowest deviations in the xy plane from (xi,yi) and with different value of the z-th component. Importantly, if, for example, during the looping one founds that atom with id 4 and 560 have in common the atom with 1100 as one of the ten nearest neighbors to them, it would be very desirable that when looping in for 1100, the program knows, from the previous calculations, that atoms with label 4 and 560 are indeed two of the ten nearest neighbors to 1100.
I had in mind something like:
file=readmatrix(‘File.txt’);
counter=0;
for i=1:length(file(:,1))
indices=file(file(:,4)~=file(i,4));
atoms=file(indices,1:3);
for j=1:length(indices)
distances(j)=norm(atoms(j,2:3)-file(i,2:3)); % Angstroms
end
sorted_distances=unique(distances); % Angstroms
interacting_distances=sorted_distances(1:10); % Angstroms
interacting_atoms=find(distances<=max(interacting_distances));
for j=1:length(interacting_atoms(:,1))
counter=counter+1;
interaction_list(counter,1)=file(i,1); % i-th atom id
interaction_list(counter,2)=interacting_atoms(j,1); % j-th atom id
interaction_list(counter,3)=somevalue;
end
clear indices distances sorted_distances interacting_distances interacting_atoms
end
Obviously, this approach does not seem to be very fast/efficient. Also, this won’t meet one of the requirements I explained above: that if one finds that i-th atom interacts with j-th atom, one knows that j-th atom interacts with i-th atom (double counting). In that case, I would need to save in the interaction_list(counter,3)=-somevalue.
Any idea? fast and efficient double counting of data MATLAB Answers — New Questions
Microsoft List sorting by Fiscal month in power Bi Report
Hi There,
I am trying to figure out how to sort by Fiscal month (October to September) within the Integrated Power bi report within Lists.
I have a Column (choice) in text format that lists October, November, Dec, etc.
When i create the Power Bi report though lists, I want to display the monthly sales by our fiscal year (October through September) but it automatically sorts it by largest sales revenue month to smallest.
I am assuming I need to create a calculated column in lists that displays fiscal month by number IE October = 1 December =2 etc but I don’t know how to male this work.
Any help would be appreciated.
Thank you
Hi There, I am trying to figure out how to sort by Fiscal month (October to September) within the Integrated Power bi report within Lists. I have a Column (choice) in text format that lists October, November, Dec, etc. When i create the Power Bi report though lists, I want to display the monthly sales by our fiscal year (October through September) but it automatically sorts it by largest sales revenue month to smallest. I am assuming I need to create a calculated column in lists that displays fiscal month by number IE October = 1 December =2 etc but I don’t know how to male this work. Any help would be appreciated. Thank you Read More
FsLogix Implementation
Hi,
We are currently in the midst of a home drive migration from an on-prem file server to OneDrive, we will be using Folder Redirection to redirect users Known Folders to OneDrive. This presents some challenges on shared computers such as our Library and Lab computers where students could login to any computer on a given day.
Our intention was to implement FsLogix to ease some of these challenges – We’ve had to implement Profile disks due to one critical application not been compatible with the OneDrive Sync and so excluded from it. However, it’s giving me some headaches at the moment. It works perfectly in a simple config with one user logging into one machine at a time, but I’ve been given some requirements which I’m struggling to make work.
Firstly, users need to be able to login multiple concurrent sessions – in addition to physical desktops we have an RDS deployment, which is currently using UPD’s but our intention was to ditch UPD’s and also apply FsLogix Profiles to RDS, so our users maybe logged on to one or more physical desktops and then have an RDS Application open as well. I have been testing differencing disks with multiple physical computers. MS documentation suggests setting it to option 3 should allow you to connect concurrent sessions from different computers. However, after logging into the first computer, the second computer fails to connect the profile log shows:
Attempting merge of diff disk \pathRW.VHDX
RW diff disk is open in another session
RW exists, Taking RO role
then I get:
Status set to 1: Cannot load user’s profile
Further down I get:
LoadProfile failed. Version: 2.9.8884.27471 User: User. SID: SID. SessionId: 2. FrxStatus: 5 (Access is denied.)
Secondly, I’ve been given the requirement to seperate out Staff and Student Profile disks in to seperate folders – given we’re applying a computer settings GPO I don’t see how this is feasible, maybe on the desktops different reg keys via a user GPO depending on who’s logging in.
If anyone can advise on the above it would be appreciated. I would be interested to hear if anyone else has managed to configure fsLogix in a mixed Physical Virtual deployment.
Thanks
Hi,We are currently in the midst of a home drive migration from an on-prem file server to OneDrive, we will be using Folder Redirection to redirect users Known Folders to OneDrive. This presents some challenges on shared computers such as our Library and Lab computers where students could login to any computer on a given day.Our intention was to implement FsLogix to ease some of these challenges – We’ve had to implement Profile disks due to one critical application not been compatible with the OneDrive Sync and so excluded from it. However, it’s giving me some headaches at the moment. It works perfectly in a simple config with one user logging into one machine at a time, but I’ve been given some requirements which I’m struggling to make work.Firstly, users need to be able to login multiple concurrent sessions – in addition to physical desktops we have an RDS deployment, which is currently using UPD’s but our intention was to ditch UPD’s and also apply FsLogix Profiles to RDS, so our users maybe logged on to one or more physical desktops and then have an RDS Application open as well. I have been testing differencing disks with multiple physical computers. MS documentation suggests setting it to option 3 should allow you to connect concurrent sessions from different computers. However, after logging into the first computer, the second computer fails to connect the profile log shows:Attempting merge of diff disk \pathRW.VHDXRW diff disk is open in another sessionRW exists, Taking RO rolethen I get:Status set to 1: Cannot load user’s profileFurther down I get:LoadProfile failed. Version: 2.9.8884.27471 User: User. SID: SID. SessionId: 2. FrxStatus: 5 (Access is denied.)Secondly, I’ve been given the requirement to seperate out Staff and Student Profile disks in to seperate folders – given we’re applying a computer settings GPO I don’t see how this is feasible, maybe on the desktops different reg keys via a user GPO depending on who’s logging in. If anyone can advise on the above it would be appreciated. I would be interested to hear if anyone else has managed to configure fsLogix in a mixed Physical Virtual deployment.Thanks Read More
Setting up Hotmail or Outlook account on Mac Mail?
I use Apple Mac Mail and have no interest in migrating to a new app. MS has sent me messages that while Mac Mail is a modern email application, I need to remove my hotmail account from Mac Mail (done) and then re-setup the account. However, the articles tell me how to setup my hotmail/outlook account on iOS Mail and not Mac Mail and I am getting errors when trying to figure it out on my own.
My options for servers on Mac Mail include Exchange (which I think is being deprecated).
Anyone have step by step suggestions for me?
I use Apple Mac Mail and have no interest in migrating to a new app. MS has sent me messages that while Mac Mail is a modern email application, I need to remove my hotmail account from Mac Mail (done) and then re-setup the account. However, the articles tell me how to setup my hotmail/outlook account on iOS Mail and not Mac Mail and I am getting errors when trying to figure it out on my own.My options for servers on Mac Mail include Exchange (which I think is being deprecated). Anyone have step by step suggestions for me? Read More
Get-MgUser Method not found error
Hi,
Hope this is the correct forum for a question like this. If not, please let me know.
Just trying to learn Graph to do some basic Azure user account management. But right off the bat I’m running into an error I can’t seem to correct.
I connect to Graph using:
Connect-MgGraph -Scopes “User.ReadWrite.All”
The browser pops up and prompts me for credentials and I enter my global admin credentials.
Then I type:
Get-MgUser -All
And I get the following message:
Get-MgUser_List: Method not found: ‘System.Net.Http.HttpClient Microsoft.Graph.PowerShell.Authentication.Helpers.HttpHelpers.GetGraphHttpClient(Microsoft.Graph.PowerShell.Authentication.IAuthContext)’.
Odd thing is, yesterday this was working.
This is when trying to run this from Visual Studio Code. If I run it from the old PowerShell ISE, it works fine. But I read somewhere that Graph is best run from PowerShell 7, which is what is installed in my Visual Studio Code.
Any thoughts on this? Am I missing some kind of configuration setup in VSC?
Any help is greatly appreciated, thanks in advance!
Hi,Hope this is the correct forum for a question like this. If not, please let me know. Just trying to learn Graph to do some basic Azure user account management. But right off the bat I’m running into an error I can’t seem to correct. I connect to Graph using: Connect-MgGraph -Scopes “User.ReadWrite.All”The browser pops up and prompts me for credentials and I enter my global admin credentials. Then I type:Get-MgUser -All And I get the following message:Get-MgUser_List: Method not found: ‘System.Net.Http.HttpClient Microsoft.Graph.PowerShell.Authentication.Helpers.HttpHelpers.GetGraphHttpClient(Microsoft.Graph.PowerShell.Authentication.IAuthContext)’. Odd thing is, yesterday this was working. This is when trying to run this from Visual Studio Code. If I run it from the old PowerShell ISE, it works fine. But I read somewhere that Graph is best run from PowerShell 7, which is what is installed in my Visual Studio Code. Any thoughts on this? Am I missing some kind of configuration setup in VSC? Any help is greatly appreciated, thanks in advance! Read More
Graph API to check if user is still editing the document
Hi,
I am trying to find an API to see if user is still editing the document in Office Online.
Appreciate your thoughts.
Thanks,
Mahesh
Hi, I am trying to find an API to see if user is still editing the document in Office Online.Appreciate your thoughts. Thanks,Mahesh Read More
Using CBA with a device certificate on Windows Server
Hi,
will it be possible to use CBA as “filter for devices” some day?
e.g. A Windows Server which is not hybrid joined or managed by Intune could then be identified as a “valid device” which is allowed to access Admin portal.
Like a RADIUS Auth.
BR
Stephan
Hi, will it be possible to use CBA as “filter for devices” some day?e.g. A Windows Server which is not hybrid joined or managed by Intune could then be identified as a “valid device” which is allowed to access Admin portal.Like a RADIUS Auth. BRStephan Read More
Creating a new SharePoint news post type
I have a existing SharePoint site which has two types of News posts that you can post (under post type – a “news post” and “announcement”). I would like to create a new/another post type called “community news” for example.
So on the home page, I have three sections of news items, one for “news”, one for “announcements” and a third for “community news”.
Does anyone know how I can create this please?
I have a existing SharePoint site which has two types of News posts that you can post (under post type – a “news post” and “announcement”). I would like to create a new/another post type called “community news” for example.So on the home page, I have three sections of news items, one for “news”, one for “announcements” and a third for “community news”.Does anyone know how I can create this please? Read More
How can I use multiple connected variable in ADF to be pass in my Databricks notebook
Hi,
I need 3 connected variables which I need to use in my databricks notebook.
This is the context of the variables that I need:
filepath: root/sid=test1/foldername=folder1/
sid: path identifier, this is needed so only correct files in the folder will be loaded
foldername: every “sid” may have multiple folder so I need to identify the foldername. I will also use this to partition my data for duplicates
tablename: this is the target table where I need to load the files
Basically, the two variables are predefined which is stored in a csv file.
sidtablenametest1test1_tbltest2test2_tbl
My source which is in blob storage looks like this:
And this is what I want for my variable
Looking forward to your help.
Hi, I need 3 connected variables which I need to use in my databricks notebook. This is the context of the variables that I need:filepath: root/sid=test1/foldername=folder1/ sid: path identifier, this is needed so only correct files in the folder will be loadedfoldername: every “sid” may have multiple folder so I need to identify the foldername. I will also use this to partition my data for duplicatestablename: this is the target table where I need to load the files Basically, the two variables are predefined which is stored in a csv file.sidtablenametest1test1_tbltest2test2_tbl My source which is in blob storage looks like this: And this is what I want for my variable Looking forward to your help. Read More
Remote desktop licensing mode is not configured
We have a Windows 2019 Server. It is workgroup server & not part of domain. Its been running fine since 3 to 4 years. We are seeing below message when trying to RDP to server since last 3 months. 2 concurrent RDP connections are enough & we dont need more than 2. Hence, dont need any CAL or user licenses.
Please note that I have tried stopping Remote Desktop services in order to troubleshoot the issue. But, my RDP connection immediately got disconnected & I was unable to RDP. To fix this RDP issue, opened services.msc in my laptop & with ‘connect to another computer’ option, I connected to server’s services.msc & started Remote Desktop services again. I was then able to RDP. So, realized RDS need to be running in order to RDP.
Please guide on how to fix this issue so that we will be able to RDP even after grace period.
We have a Windows 2019 Server. It is workgroup server & not part of domain. Its been running fine since 3 to 4 years. We are seeing below message when trying to RDP to server since last 3 months. 2 concurrent RDP connections are enough & we dont need more than 2. Hence, dont need any CAL or user licenses.Please note that I have tried stopping Remote Desktop services in order to troubleshoot the issue. But, my RDP connection immediately got disconnected & I was unable to RDP. To fix this RDP issue, opened services.msc in my laptop & with ‘connect to another computer’ option, I connected to server’s services.msc & started Remote Desktop services again. I was then able to RDP. So, realized RDS need to be running in order to RDP.Please guide on how to fix this issue so that we will be able to RDP even after grace period. Read More
See also … blocks viewing of answer
I’m trying to see an answer that includes a screenshot apparently. The See Also pane is blocking much of the screen so I can’t see what I need to see. How do I dismiss this part I don’t need?I’m trying to see an answer that includes a screenshot apparently. The See Also pane is blocking much of the screen so I can’t see what I need to see. How do I dismiss this part I don’t need? I’m trying to see an answer that includes a screenshot apparently. The See Also pane is blocking much of the screen so I can’t see what I need to see. How do I dismiss this part I don’t need? dismiss see also MATLAB Answers — New Questions
Path Following Algorithm Line-Circle Path Path Switching Problem
Hi everyone ,
I’m trying to implement a path following algorithm for UAV (Carrot Chase) with matlab for a line-circle path.
I have already implemented the algorithm for straight line and the loiter separately and this codes are work fine. But, since they are geometrically different shapes, they have different algorithms. So we need to switch algorithms when switching between these two shapes if we want to follow this two shapes together . And i added a algorithm for that but i think it’s not working
i have a variable for that named as " guidance index". You can see this variable at the begginning of the code. When i enter this variable 1 the UAV will follow the straight line path firstly. But if i enter this variable 2, the UAV will follow the circle firstly.
You can see this in the files I attached. But the real problem starts here. After the straight line path ends, it does not follow the circular path but goes out of the path. Likewise, when I set the guidance_index variable to 2, it follows the circle path correctly, but this time it does not continue with the straight line path.
How can i fix it ?
Thanks a lot.
Best RegardsHi everyone ,
I’m trying to implement a path following algorithm for UAV (Carrot Chase) with matlab for a line-circle path.
I have already implemented the algorithm for straight line and the loiter separately and this codes are work fine. But, since they are geometrically different shapes, they have different algorithms. So we need to switch algorithms when switching between these two shapes if we want to follow this two shapes together . And i added a algorithm for that but i think it’s not working
i have a variable for that named as " guidance index". You can see this variable at the begginning of the code. When i enter this variable 1 the UAV will follow the straight line path firstly. But if i enter this variable 2, the UAV will follow the circle firstly.
You can see this in the files I attached. But the real problem starts here. After the straight line path ends, it does not follow the circular path but goes out of the path. Likewise, when I set the guidance_index variable to 2, it follows the circle path correctly, but this time it does not continue with the straight line path.
How can i fix it ?
Thanks a lot.
Best Regards Hi everyone ,
I’m trying to implement a path following algorithm for UAV (Carrot Chase) with matlab for a line-circle path.
I have already implemented the algorithm for straight line and the loiter separately and this codes are work fine. But, since they are geometrically different shapes, they have different algorithms. So we need to switch algorithms when switching between these two shapes if we want to follow this two shapes together . And i added a algorithm for that but i think it’s not working
i have a variable for that named as " guidance index". You can see this variable at the begginning of the code. When i enter this variable 1 the UAV will follow the straight line path firstly. But if i enter this variable 2, the UAV will follow the circle firstly.
You can see this in the files I attached. But the real problem starts here. After the straight line path ends, it does not follow the circular path but goes out of the path. Likewise, when I set the guidance_index variable to 2, it follows the circle path correctly, but this time it does not continue with the straight line path.
How can i fix it ?
Thanks a lot.
Best Regards matlab, path following, uav MATLAB Answers — New Questions
Setting unknown constants in equation for known data
I have data of points and equation with 3 unknown constants.I want to finds the constants that will give me the values of the data how can i do that ?I have data of points and equation with 3 unknown constants.I want to finds the constants that will give me the values of the data how can i do that ? I have data of points and equation with 3 unknown constants.I want to finds the constants that will give me the values of the data how can i do that ? adjust, equation, constants MATLAB Answers — New Questions
