Month: July 2024
Lesson Learned #505: Verifying IP Resolution in Azure SQL Database in Private Link
This last week, I worked on two service requests that our customers got the following error message: (Reason: An instance-specific error occurred while establishing a connection to SQL Server. Connection was denied since Deny Public Network Access is set to Yes (https://docs.microsoft.com/azure/azure-sql/database/connectivity-settings#deny-public-network-access). To connect to this server, use the Private Endpoint from inside your virtual network (https://docs.microsoft.com/azure/sql-database/sql-database-private-endpoint-overview#how-to-set-up-private-link-for-azure-sql-database).) using Private link connection.
In both situations, I have found that our customers are using custom DNS configurations. On rare occasions, the resolved IP is the public gateway IP instead of the private IP from the Private Link. While the root cause of this issue needs to be investigated, I would like to share this C# code that checks IP resolution before connecting to Azure SQL Database.
The idea is if the IP resolved is not the private one it tries to request again 5 time with a delay of 250 ms to be sure that the IP will be the expected one. If not, the application might be finished or reported an error. You can adapt this code according to your needs to improve the reliability of your connections.
This approach helps avoid unnecessary errors and ensures a reliable connection to the Azure SQL Database. Here is the C# script that implements this solution:
using System;
using System.Net;
using System.Threading;
using Microsoft.Data.SqlClient;
class Program
{
static void Main(string[] args)
{
string serverName = “your-sql-server.database.windows.net”;
string resolvedIp = “”;
int maxAttempts = 5;
int attempts = 0;
bool isPublicIp = true;
while (attempts < maxAttempts)
{
resolvedIp = ResolveDns(serverName);
if (IsPublicIp(resolvedIp))
{
attempts++;
Console.WriteLine($”Attempt {attempts}: Resolved to public IP {resolvedIp}. Retrying in 250ms…”);
Thread.Sleep(250);
}
else
{
Console.WriteLine($”Resolved to private IP {resolvedIp}.”);
isPublicIp = false;
break;
}
}
if (isPublicIp)
{
Console.WriteLine(“Failed to resolve to a private IP after 5 attempts. Exiting.”);
return;
}
string connectionString = $”Server={serverName};Database=dbname;User Id=your-username;Password=your-password;”;
using (SqlConnection connection = new SqlConnection(connectionString))
{
try
{
connection.Open();
Console.WriteLine(“Connection successful.”);
}
catch (Exception ex)
{
Console.WriteLine($”Error connecting: {ex.Message}”);
}
}
}
static string ResolveDns(string serverName)
{
var hostEntry = Dns.GetHostEntry(serverName);
return hostEntry.AddressList[0].ToString();
}
static bool IsPublicIp(string ipAddress)
{
var ip = IPAddress.Parse(ipAddress);
return !IsPrivateIp(ip);
}
static bool IsPrivateIp(IPAddress ipAddress)
{
byte[] bytes = ipAddress.GetAddressBytes();
return (bytes[0] == 10) ||
(bytes[0] == 172 && bytes[1] >= 16 && bytes[1] <= 31) ||
(bytes[0] == 192 && bytes[1] == 168);
}
}
Articles related:
Microsoft Tech Community – Latest Blogs –Read More
Build process stopped at compile stage. Unable to find the following link-only objects that are specified in the build information: LibGCCarm_cortexm7ldfsp_mathlibCMSISD
Hola, estoy tratando de ejecutar el siguiente diagrama de bloques en Simulink con el NUCLEO-F746ZG.
Al ejecutar la generación de código, me resulta este error:Hola, estoy tratando de ejecutar el siguiente diagrama de bloques en Simulink con el NUCLEO-F746ZG.
Al ejecutar la generación de código, me resulta este error: Hola, estoy tratando de ejecutar el siguiente diagrama de bloques en Simulink con el NUCLEO-F746ZG.
Al ejecutar la generación de código, me resulta este error: stm32, simulink, code generation MATLAB Answers — New Questions
Tracing a loss function to two outputs of the network in order to train a PINN model
Hello everybody,
I’m trying to recreate a machine learning code from this paper in matlab. In python it is somewhat straightforward, but MATLAB does not seem to have the functionality (that I have found) to perform the command:
torch.optim.Adam(list(Net_u.parameters())+list(Net_v.parameters()), lr=learning_rate)
that is, to update the learning parameters for two networks simultaneously. I’ve done some test with the dlgradient function and as I come to understand it, it is only capable of tracing the parameters regarding one function, e.g.;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY)
du_x = dlgradient(sum(U(1,:),"all"),XY,"EnableHigherDerivatives",true);
du_y = dlgradient(sum(V(1,:),"all"),XY);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
Will give completely different gradients then;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_x = dlgradient(sum(ux,"all"),XY);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
Having both higher derivatives traced on, will produce results identical to the first piece of code;
e.g;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_x = dlgradient(sum(ux,"all"),XY,"EnableHigherDerivatives",true);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
switched the order of dlgradient calls will produce results identical to the second piece of code;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
du_x = dlgradient(sum(ux,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
I only provide short snippets of code as the whole script is a little more then 300 lines, and not I believe is relevant.
At any rate, neither of those two options is able to solve the PINN problem in the example (gradient descent does not converge on the solution).
Has someone experienced and/or played around with these kinds of problems? Any insight would be greatly appreciated.Hello everybody,
I’m trying to recreate a machine learning code from this paper in matlab. In python it is somewhat straightforward, but MATLAB does not seem to have the functionality (that I have found) to perform the command:
torch.optim.Adam(list(Net_u.parameters())+list(Net_v.parameters()), lr=learning_rate)
that is, to update the learning parameters for two networks simultaneously. I’ve done some test with the dlgradient function and as I come to understand it, it is only capable of tracing the parameters regarding one function, e.g.;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY)
du_x = dlgradient(sum(U(1,:),"all"),XY,"EnableHigherDerivatives",true);
du_y = dlgradient(sum(V(1,:),"all"),XY);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
Will give completely different gradients then;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_x = dlgradient(sum(ux,"all"),XY);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
Having both higher derivatives traced on, will produce results identical to the first piece of code;
e.g;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_x = dlgradient(sum(ux,"all"),XY,"EnableHigherDerivatives",true);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
switched the order of dlgradient calls will produce results identical to the second piece of code;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
du_x = dlgradient(sum(ux,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
I only provide short snippets of code as the whole script is a little more then 300 lines, and not I believe is relevant.
At any rate, neither of those two options is able to solve the PINN problem in the example (gradient descent does not converge on the solution).
Has someone experienced and/or played around with these kinds of problems? Any insight would be greatly appreciated. Hello everybody,
I’m trying to recreate a machine learning code from this paper in matlab. In python it is somewhat straightforward, but MATLAB does not seem to have the functionality (that I have found) to perform the command:
torch.optim.Adam(list(Net_u.parameters())+list(Net_v.parameters()), lr=learning_rate)
that is, to update the learning parameters for two networks simultaneously. I’ve done some test with the dlgradient function and as I come to understand it, it is only capable of tracing the parameters regarding one function, e.g.;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY)
du_x = dlgradient(sum(U(1,:),"all"),XY,"EnableHigherDerivatives",true);
du_y = dlgradient(sum(V(1,:),"all"),XY);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
Will give completely different gradients then;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_x = dlgradient(sum(ux,"all"),XY);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
Having both higher derivatives traced on, will produce results identical to the first piece of code;
e.g;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_x = dlgradient(sum(ux,"all"),XY,"EnableHigherDerivatives",true);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
switched the order of dlgradient calls will produce results identical to the second piece of code;
[U,~] = forward(net_u,XY);
[V,~] = forward(net_v,XY);
du_y = dlgradient(sum(uy,"all"),XY,"EnableHigherDerivatives",true);
du_x = dlgradient(sum(ux,"all"),XY,"EnableHigherDerivatives",true);
…. calculations of of loss function, exempted from code for brevity…
gradients_u = dlgradient(loss,net_u.Learnables);
gradients_v = dlgradient(loss,net_v.Learnables);
I only provide short snippets of code as the whole script is a little more then 300 lines, and not I believe is relevant.
At any rate, neither of those two options is able to solve the PINN problem in the example (gradient descent does not converge on the solution).
Has someone experienced and/or played around with these kinds of problems? Any insight would be greatly appreciated. machine learning, dlgradient, custom loss function MATLAB Answers — New Questions
Tasks not visible in Planner anymore
Hello,
Since yesterday, my tasks in Planner are all gone. They are luckily still visible in my mobile app, but not in the Desktop Teams app. Yesterday they were still visible in the online Teams version, but today not anymore. Is this a common problem?
Hello, Since yesterday, my tasks in Planner are all gone. They are luckily still visible in my mobile app, but not in the Desktop Teams app. Yesterday they were still visible in the online Teams version, but today not anymore. Is this a common problem? Read More
Same excel file Yet different lists
Hey there, iam new to this power platform but iam adjusting. But i still can’t comprehend the fact that these lists are all created from the same excel file yet they show different item counts.WHY IS THAT i have 10k items in my excel pls help
Hey there, iam new to this power platform but iam adjusting. But i still can’t comprehend the fact that these lists are all created from the same excel file yet they show different item counts.WHY IS THAT i have 10k items in my excel pls help Read More
What is error code 1612 in Q.B Desktop?
I’m encountering Quick-Books Error 1612 when trying to install the latest update. The error message states that the update installer is missing or corrupted. I’ve tried restarting my computer and re-downloading the update, but the issue persists. Any advice from the community would be greatly appreciated!
I’m encountering Quick-Books Error 1612 when trying to install the latest update. The error message states that the update installer is missing or corrupted. I’ve tried restarting my computer and re-downloading the update, but the issue persists. Any advice from the community would be greatly appreciated! Read More
What is the best way to extract vocals from song on a computer?
Hello everyone,
I’ve been trying to separate vocals from some of my favorite songs, but the tools I’ve found so far haven’t been giving me the best results. I’m looking for recommendations on high-quality software or online tools that can effectively extract vocals from song. Here are some specific requirements:
Accuracy: The tool should provide clean separation of vocals and background music.Ease of Use: A user-friendly interface is a plus.Supported Formats: It should support a wide range of audio formats.Free/Paid: I’m open to both free and paid options, but I’d appreciate knowing about any standout free tools.
If you’ve had any good experiences with particular software or online services, please share your thoughts and recommendations.
Thanks for your help!
Hello everyone, I’ve been trying to separate vocals from some of my favorite songs, but the tools I’ve found so far haven’t been giving me the best results. I’m looking for recommendations on high-quality software or online tools that can effectively extract vocals from song. Here are some specific requirements: Accuracy: The tool should provide clean separation of vocals and background music.Ease of Use: A user-friendly interface is a plus.Supported Formats: It should support a wide range of audio formats.Free/Paid: I’m open to both free and paid options, but I’d appreciate knowing about any standout free tools. If you’ve had any good experiences with particular software or online services, please share your thoughts and recommendations. Thanks for your help! Read More
Flux notifications disappeared and can’t see missed calls logs
Hi , this is my first post here. Thank you so much in advance for reading the following request.
My organization started using Teams as a Phone service a few weeks ago.
Few days ago, we stopped recieving Flux notifications for missed calls (only reactions, messages or calendar organization).
Now, when a new caller times out without an answer, we have no logs of this call via Calls > History and we can’t even see a new red pin to tell us that someone called and missed the call.
Can you please suggest a solution ?
Thank you in advance,
Best regards
OE – Helpdesk
Hi , this is my first post here. Thank you so much in advance for reading the following request. My organization started using Teams as a Phone service a few weeks ago. Few days ago, we stopped recieving Flux notifications for missed calls (only reactions, messages or calendar organization). Now, when a new caller times out without an answer, we have no logs of this call via Calls > History and we can’t even see a new red pin to tell us that someone called and missed the call.Can you please suggest a solution ? Thank you in advance,Best regardsOE – Helpdesk Read More
Formula calculation displayed wrongly (IF results)
Dear community,
I have a problem because first time I see something like this.
Formula IF with two logic AND criteria calculates correctly, but result is showing in Cell as 0 (zero).
In both marked Cells are Formulas like below. The calculation is correctly because Formula result show correct values (upper Cell should be =””, lower Cell should be =2), but as you see both are shown as =0.
Cell formating change is not helping to show the correct value.
Previously I had the same formula but second logic criteria was just checking one, direct, upper Cell and everything was showing correctly, but I need only one value in range Q15:Q35, so I had to change it.
Please help me to uderstand or give me some ideas for investigation.
Dear community, I have a problem because first time I see something like this.Formula IF with two logic AND criteria calculates correctly, but result is showing in Cell as 0 (zero).In both marked Cells are Formulas like below. The calculation is correctly because Formula result show correct values (upper Cell should be =””, lower Cell should be =2), but as you see both are shown as =0.Cell formating change is not helping to show the correct value. Previously I had the same formula but second logic criteria was just checking one, direct, upper Cell and everything was showing correctly, but I need only one value in range Q15:Q35, so I had to change it.Please help me to uderstand or give me some ideas for investigation. Read More
Panel Defender Device Health Status
I have included 1 Linux Centos 7 server and 1 Windows Server 2019 in my Windows Defender administration center, the machines appear in the device panel but the following appears in the maintenance status: Device maintenance status
There is no data to show
with another Ubuntu server that I have uploaded, I do have information
I have included 1 Linux Centos 7 server and 1 Windows Server 2019 in my Windows Defender administration center, the machines appear in the device panel but the following appears in the maintenance status: Device maintenance statusThere is no data to showwith another Ubuntu server that I have uploaded, I do have information Read More
Resolving Q.B Error 404 When Using Features or Updating
I am experiencing an issue with Quick-Books and need some assistance. When I try to use certain features or update my Q.B, I receive an error message stating “Error 404: Quick-Books has encountered a problem and needs to close.”
I have checked my internet connection and ensured that it is stable, but the error persists.
Could you please provide guidance on how to resolve this error? Any troubleshooting steps or suggestions would be greatly appreciated.
I am experiencing an issue with Quick-Books and need some assistance. When I try to use certain features or update my Q.B, I receive an error message stating “Error 404: Quick-Books has encountered a problem and needs to close.”I have checked my internet connection and ensured that it is stable, but the error persists.Could you please provide guidance on how to resolve this error? Any troubleshooting steps or suggestions would be greatly appreciated. Read More
can not remove managed private endpoint
Hi,
I created an Integration Runtime Virtual Network. Then I created a managed private endpoint with a blob storage. I approved the request on the Storage Account, so the connection was setup. Then I removed the endpoint on the Storage Acount side. And now I have a problem…
In my Data Factory the private endpoint was immediately published on creation (I created it in my feature branche). So the Endpoint is still in the Live Data Factory. If I want to create a new endpoint, I can not.
The following message is displayed: “Failed to save <endpoint name>. Error: Invalid resource request. Resource type: ‘ManagedPrivateEndpoint’, Resource name: ‘<endpoint name>’ ‘Error: A managed private endpoint to the data source already exist.’. Please switch to live mode and check whether there is an existing managed private endpoint to the data source.”
The private endpoint is still there, but i can not access it, neither delete it.
Does anyone know how I can delete the endpoint in the publish-branche?? Merging a new change won’t work. The endpoint is still there…
Thanks in advance!!
Hi, I created an Integration Runtime Virtual Network. Then I created a managed private endpoint with a blob storage. I approved the request on the Storage Account, so the connection was setup. Then I removed the endpoint on the Storage Acount side. And now I have a problem…In my Data Factory the private endpoint was immediately published on creation (I created it in my feature branche). So the Endpoint is still in the Live Data Factory. If I want to create a new endpoint, I can not. The following message is displayed: “Failed to save <endpoint name>. Error: Invalid resource request. Resource type: ‘ManagedPrivateEndpoint’, Resource name: ‘<endpoint name>’ ‘Error: A managed private endpoint to the data source already exist.’. Please switch to live mode and check whether there is an existing managed private endpoint to the data source.” The private endpoint is still there, but i can not access it, neither delete it. Does anyone know how I can delete the endpoint in the publish-branche?? Merging a new change won’t work. The endpoint is still there… Thanks in advance!! Read More
Ghant Chart – Status date line
Good day,
How do I , can I put a date on the Status date line in the Ghant chart?
Good day,How do I , can I put a date on the Status date line in the Ghant chart? Read More
Impulse response from poles and zeros
find out impulse response h(n) from pole zero location of system function.
Location of zeros= -0.2, -0.3, -0.4,-0.8
Location of poles= 0.4+0.4j, 0.4-0.4j, 0.5, 0.7find out impulse response h(n) from pole zero location of system function.
Location of zeros= -0.2, -0.3, -0.4,-0.8
Location of poles= 0.4+0.4j, 0.4-0.4j, 0.5, 0.7 find out impulse response h(n) from pole zero location of system function.
Location of zeros= -0.2, -0.3, -0.4,-0.8
Location of poles= 0.4+0.4j, 0.4-0.4j, 0.5, 0.7 code, —obviously homework— MATLAB Answers — New Questions
Prevent mlint warning for onCleanup like return value
I wrote a function, similar to onCleanup. I noticed that Matlab does not give a mlint warning for the following code.
dummy = onCleanup( @() some_func );
But for my own function
dummy = MyOwnCleanup( @() some_func );
I get the warning Value assigned to variable might be unused, which I need to silence with %#ok<NASGU>. Obviously, Matlab recognizes the onCleanup call and does not emit a warning. How can I acchieve similar behaviour for my own MyOwnCleanup function?I wrote a function, similar to onCleanup. I noticed that Matlab does not give a mlint warning for the following code.
dummy = onCleanup( @() some_func );
But for my own function
dummy = MyOwnCleanup( @() some_func );
I get the warning Value assigned to variable might be unused, which I need to silence with %#ok<NASGU>. Obviously, Matlab recognizes the onCleanup call and does not emit a warning. How can I acchieve similar behaviour for my own MyOwnCleanup function? I wrote a function, similar to onCleanup. I noticed that Matlab does not give a mlint warning for the following code.
dummy = onCleanup( @() some_func );
But for my own function
dummy = MyOwnCleanup( @() some_func );
I get the warning Value assigned to variable might be unused, which I need to silence with %#ok<NASGU>. Obviously, Matlab recognizes the onCleanup call and does not emit a warning. How can I acchieve similar behaviour for my own MyOwnCleanup function? mlint, oncleanup MATLAB Answers — New Questions
Bagaimana Cara menampilkan hasil dalam berupa grafik di gui matlab ?
Mohon bantuannya para master, sudah memasukan inputan tetapi tidak muncul hasil atau garis grafik dalam axes3, terima kasihMohon bantuannya para master, sudah memasukan inputan tetapi tidak muncul hasil atau garis grafik dalam axes3, terima kasih Mohon bantuannya para master, sudah memasukan inputan tetapi tidak muncul hasil atau garis grafik dalam axes3, terima kasih pathloss MATLAB Answers — New Questions
Big CSV file read in matlab
I have a CSV file of 5 columns and unknown rows, Its size is 45 GB.
I want to read it in MATLAB and plot it against the time.
Is there any way to do it ?I have a CSV file of 5 columns and unknown rows, Its size is 45 GB.
I want to read it in MATLAB and plot it against the time.
Is there any way to do it ? I have a CSV file of 5 columns and unknown rows, Its size is 45 GB.
I want to read it in MATLAB and plot it against the time.
Is there any way to do it ? bigdata MATLAB Answers — New Questions
New Outlook Data Classification/DLP/missing features
Hello,
I am noticing a couple of new issues with New Outlook. All the above works with old Outlook.
-Auto Labelling not working(Based on Sensitive info type).
-Label requirement not working (i.e. Users can send without a label, in old OLK/OWA, they get a prompt to label the email)
-Label Inheritance not working (from attachment)
-Smime Signing/Viewing emails.
-If you set a dlp policy with an option to add certain label based on a detected sensitive info type on unlabelled emails, The policy tip is displayed but the label is not added.
All the above works with old Outlook and most work in OWA but all the above does not work in New Outlook. Any workarounds? are those functions not supported yet? Any help will be appreciated.
Hello,I am noticing a couple of new issues with New Outlook. All the above works with old Outlook. -Auto Labelling not working(Based on Sensitive info type).-Label requirement not working (i.e. Users can send without a label, in old OLK/OWA, they get a prompt to label the email)-Label Inheritance not working (from attachment)-Smime Signing/Viewing emails.-If you set a dlp policy with an option to add certain label based on a detected sensitive info type on unlabelled emails, The policy tip is displayed but the label is not added. All the above works with old Outlook and most work in OWA but all the above does not work in New Outlook. Any workarounds? are those functions not supported yet? Any help will be appreciated. Read More
Attapoll Referral Code {CZUZM} Get $25 sign-up bonus and a 30% referral
Here is a referral code that grants $20:
– CZUZM: Use this Attapoll referral code to get a $20 sign-up bonus.
To apply the Attapoll referral code:
1. Download the Attapoll app.
2. Enter your basic details to verify your account.
3. After signing up, go to “My Account” and click on the “Enter Referral Code” tab.
4. Enter the Attapoll referral code (CZUZM) and click apply.
Please note that referral codes are subject to change and may have specific terms and conditions attached to them. Make sure to check the Attapoll app or website for the latest information.
Here’s how to use an Attapoll referral code to get a $20 sign-up bonus:
1. Download the Attapoll app from the App Store or Google Play Store.
2. Sign up for an account using your email address, Facebook, or Google.
3. Enter the referral code: CZUZM
4. Complete your profile and verify your account.
5. Receive your $20 sign-up bonus!
Note: The referral code CZUZMmust be entered during the sign-up process to receive the $20 bonus. Terms and conditions apply, and Attapoll may modify or terminate this offer at any time.
By using the referral code CZUZM, you’ll get a head start on earning money with Attapoll. Enjoy!
Here is a referral code that grants $20:- CZUZM: Use this Attapoll referral code to get a $20 sign-up bonus.To apply the Attapoll referral code:1. Download the Attapoll app.2. Enter your basic details to verify your account.3. After signing up, go to “My Account” and click on the “Enter Referral Code” tab.4. Enter the Attapoll referral code (CZUZM) and click apply.Please note that referral codes are subject to change and may have specific terms and conditions attached to them. Make sure to check the Attapoll app or website for the latest information.Here’s how to use an Attapoll referral code to get a $20 sign-up bonus:1. Download the Attapoll app from the App Store or Google Play Store.2. Sign up for an account using your email address, Facebook, or Google.3. Enter the referral code: CZUZM4. Complete your profile and verify your account.5. Receive your $20 sign-up bonus!Note: The referral code CZUZMmust be entered during the sign-up process to receive the $20 bonus. Terms and conditions apply, and Attapoll may modify or terminate this offer at any time.By using the referral code CZUZM, you’ll get a head start on earning money with Attapoll. Enjoy! Read More
Windwos Server Default Administrative Shares (C$,D$) 2hr Lost
Hi, i’m coming here for some help on the server manager.
Handling Process:
1. GPO distributes registry entries for AutoShareServer and AutoShareWks with values set to 0.
2. Default system shares (C$, D$) disappear on all servers (2008R2, 2012, 2016, 2019, 2022) and workstations (Win7) under AD (Server 2019).
3. After deleting GPO registry keys, changing AutoShareServer and AutoShareWks values to 1 in the server’s registry via regedit, and restarting the server, the issue persists (C$, D$ still not visible).
4. Deleting AutoShareServer and AutoShareWks registry entries from the server’s registry via regedit and restarting the server do not resolve the issue (C$, D$ still not visible).
5. After entering “net share C$=C: /grant:administrators,full” in PowerShell on the server, the C$ share automatically disappears after approximately two hours.
6. Creating the C$ share using Computer Management on the server, but it still disappears after around two hours.
7. Executing “Get-service LanmanServer | restart-service -verbose” on the server does not prevent the shares from disappearing after about two hours.
8. Uninstalling antivirus software does not change the situation.
Is there any other way to address this issue?
Hi, i’m coming here for some help on the server manager. Handling Process:1. GPO distributes registry entries for AutoShareServer and AutoShareWks with values set to 0.2. Default system shares (C$, D$) disappear on all servers (2008R2, 2012, 2016, 2019, 2022) and workstations (Win7) under AD (Server 2019).3. After deleting GPO registry keys, changing AutoShareServer and AutoShareWks values to 1 in the server’s registry via regedit, and restarting the server, the issue persists (C$, D$ still not visible).4. Deleting AutoShareServer and AutoShareWks registry entries from the server’s registry via regedit and restarting the server do not resolve the issue (C$, D$ still not visible).5. After entering “net share C$=C: /grant:administrators,full” in PowerShell on the server, the C$ share automatically disappears after approximately two hours.6. Creating the C$ share using Computer Management on the server, but it still disappears after around two hours.7. Executing “Get-service LanmanServer | restart-service -verbose” on the server does not prevent the shares from disappearing after about two hours.8. Uninstalling antivirus software does not change the situation.Is there any other way to address this issue? Read More
