Month: July 2024
Frozen
I’ve been experiencing frequent system freezes, causing me to reboot. I suspect that Hardware Accelerated GPU Scheduling may be the culprit. Recently, I encountered three freezes within a mere 30-minute span while playing Fallout 76, a game where I’ve never experienced any issues until the past few weeks.
Upon disabling Hardware Accelerated GPU Scheduling, I played Fallout 76 for 2 hours without encountering a single freeze. I’ve conducted various checks, such as testing the RAM, but the issue persists. Any suggestions on what might be causing this and how to address it?
I’ve been experiencing frequent system freezes, causing me to reboot. I suspect that Hardware Accelerated GPU Scheduling may be the culprit. Recently, I encountered three freezes within a mere 30-minute span while playing Fallout 76, a game where I’ve never experienced any issues until the past few weeks. Upon disabling Hardware Accelerated GPU Scheduling, I played Fallout 76 for 2 hours without encountering a single freeze. I’ve conducted various checks, such as testing the RAM, but the issue persists. Any suggestions on what might be causing this and how to address it? Read More
Displayed Duplicate Entries in File Explorer
Hello! I’ve encountered a strange issue in File Explorer where there are duplicate entries pointing to my OneDrive folder. I’m puzzled as to how this occurred and I’m hesitant to delete one entry as I’m unsure of the implications, especially regarding the safety of my OneDrive folder. If anyone could provide guidance on how to remove one entry while preserving the integrity of the OneDrive folder, I’d greatly appreciate it. I’ve included a screen capture displaying the duplicate entries on the left side of the screen. Thank you for your assistance! – BEH
Hello! I’ve encountered a strange issue in File Explorer where there are duplicate entries pointing to my OneDrive folder. I’m puzzled as to how this occurred and I’m hesitant to delete one entry as I’m unsure of the implications, especially regarding the safety of my OneDrive folder. If anyone could provide guidance on how to remove one entry while preserving the integrity of the OneDrive folder, I’d greatly appreciate it. I’ve included a screen capture displaying the duplicate entries on the left side of the screen. Thank you for your assistance! – BEH Read More
I’m using VIT transformer in my code. How to convert the output of 1D layer of VIT into 2D with format SSCB?
I used the following code from Matlab answer to solve the errorrs that shown in the attached figure.
(Samuel Somuyiwa on 24 Jul 2023)
% Get Vision Transformer model
net = visionTransformer;
% Create dummy input
input = dlarray(rand(384,384,3),’SSCB’);
% Obtain output embedding from last layerNormalizationLayer
out = forward(net, input, Outputs=’encoder_norm’);
% Reshape output patch embedding
out = reshapePatchEmbedding(out);
function out = reshapePatchEmbedding(in)
% Remove output embedding corresponding to class token from input
out = in(2:end,:,:);
% Reshape resulting embedding to input format
WH = sqrt(size(out, 1));
C = size(out, 2);
out = reshape(out, WH, WH, C, []); % Shape is W x H x C x N
out = permute(out, [2, 1, 3, 4]); % Shape is H x W x C x N
% Convert to formatted dlarray
out = dlarray(out, ‘SSCB’);
endI used the following code from Matlab answer to solve the errorrs that shown in the attached figure.
(Samuel Somuyiwa on 24 Jul 2023)
% Get Vision Transformer model
net = visionTransformer;
% Create dummy input
input = dlarray(rand(384,384,3),’SSCB’);
% Obtain output embedding from last layerNormalizationLayer
out = forward(net, input, Outputs=’encoder_norm’);
% Reshape output patch embedding
out = reshapePatchEmbedding(out);
function out = reshapePatchEmbedding(in)
% Remove output embedding corresponding to class token from input
out = in(2:end,:,:);
% Reshape resulting embedding to input format
WH = sqrt(size(out, 1));
C = size(out, 2);
out = reshape(out, WH, WH, C, []); % Shape is W x H x C x N
out = permute(out, [2, 1, 3, 4]); % Shape is H x W x C x N
% Convert to formatted dlarray
out = dlarray(out, ‘SSCB’);
end I used the following code from Matlab answer to solve the errorrs that shown in the attached figure.
(Samuel Somuyiwa on 24 Jul 2023)
% Get Vision Transformer model
net = visionTransformer;
% Create dummy input
input = dlarray(rand(384,384,3),’SSCB’);
% Obtain output embedding from last layerNormalizationLayer
out = forward(net, input, Outputs=’encoder_norm’);
% Reshape output patch embedding
out = reshapePatchEmbedding(out);
function out = reshapePatchEmbedding(in)
% Remove output embedding corresponding to class token from input
out = in(2:end,:,:);
% Reshape resulting embedding to input format
WH = sqrt(size(out, 1));
C = size(out, 2);
out = reshape(out, WH, WH, C, []); % Shape is W x H x C x N
out = permute(out, [2, 1, 3, 4]); % Shape is H x W x C x N
% Convert to formatted dlarray
out = dlarray(out, ‘SSCB’);
end deep learning MATLAB Answers — New Questions
I want to use the multicore function of Simulink to accelarate my simulation. Having errors when profiling. It can not find the header file?
This the error shown in matlab command windows. I don’t konw how to solve this!
cpp: e:multicoretestnewmaintest grt rtwrt main.c:22 Could not find include file <processthreadsapi.h>
Error rt main.c: 287 operands of= have illegal types ‘pointer to void’ and ‘int’
Error rt main.c: 360 operands of= have illegal types ‘pointer to void’ and ‘int’
2 errors, 1 warning
The line 287 and Line 360 of rt_main.c is
orTimer = CreateWaitableTimer((NULL), false, (NULL));This the error shown in matlab command windows. I don’t konw how to solve this!
cpp: e:multicoretestnewmaintest grt rtwrt main.c:22 Could not find include file <processthreadsapi.h>
Error rt main.c: 287 operands of= have illegal types ‘pointer to void’ and ‘int’
Error rt main.c: 360 operands of= have illegal types ‘pointer to void’ and ‘int’
2 errors, 1 warning
The line 287 and Line 360 of rt_main.c is
orTimer = CreateWaitableTimer((NULL), false, (NULL)); This the error shown in matlab command windows. I don’t konw how to solve this!
cpp: e:multicoretestnewmaintest grt rtwrt main.c:22 Could not find include file <processthreadsapi.h>
Error rt main.c: 287 operands of= have illegal types ‘pointer to void’ and ‘int’
Error rt main.c: 360 operands of= have illegal types ‘pointer to void’ and ‘int’
2 errors, 1 warning
The line 287 and Line 360 of rt_main.c is
orTimer = CreateWaitableTimer((NULL), false, (NULL)); multicore, concurrent execution MATLAB Answers — New Questions
plotting multiple boxplots in the same figure window
I have 10 vectors of temperature data, all different lengths, that I want to make boxplots of and plot them all in the same figure window. How do I do this?I have 10 vectors of temperature data, all different lengths, that I want to make boxplots of and plot them all in the same figure window. How do I do this? I have 10 vectors of temperature data, all different lengths, that I want to make boxplots of and plot them all in the same figure window. How do I do this? boxplots, multiple vectors MATLAB Answers — New Questions
جـلب الـحبيب < الهفوف☎️ 54029097.9 : 966 +| نمبر شيــخ روحــاني سـعودي KSA
جـلب الـحبيب < الهفوف:telephone: 54029097.9 : 966 +| نمبر شيــخ روحــاني سـعودي KSA
الشيخ الروحاني فلاح عبد العزيز، فك السحر ، رد المطلقة ، جلب الحبيب، خواتم روحانية، عرق السواحل، فرج الضبعة، تزويج البائر، تسهيل الزواج ، علاج العقم، تفريق وطلاق ، طاعة عمياء، عقد لسان الظالم ، جلب الحبيب السعودية ، جلب الحبيب قطر ، جلب الحبيب الكويت ، جلب الحبيب الإمارات ، سحر سفلي ، سحر علوي ،جلب البنت للبنت ، جلب الشاب للشاب ، شيخ روحاني، شيخة، روحانية، ساحر، مشعوذ، سحر أسود، سحر تفريق، سحر علوي ، جلب الحبيب البحرين، جلب الحبيب عُمان
جـلب الـحبيب < الهفوف:telephone: 54029097.9 : 966 +| نمبر شيــخ روحــاني سـعودي KSAالشيخ الروحاني فلاح عبد العزيز، فك السحر ، رد المطلقة ، جلب الحبيب، خواتم روحانية، عرق السواحل، فرج الضبعة، تزويج البائر، تسهيل الزواج ، علاج العقم، تفريق وطلاق ، طاعة عمياء، عقد لسان الظالم ، جلب الحبيب السعودية ، جلب الحبيب قطر ، جلب الحبيب الكويت ، جلب الحبيب الإمارات ، سحر سفلي ، سحر علوي ،جلب البنت للبنت ، جلب الشاب للشاب ، شيخ روحاني، شيخة، روحانية، ساحر، مشعوذ، سحر أسود، سحر تفريق، سحر علوي ، جلب الحبيب البحرين، جلب الحبيب عُمان Read More
Site Move Tool – Bing Webmaster Tools – link does not work
Hi,
I am trying to move my site to a new domain on Bing Webmaster Tools.
The following article from Bing (https://blogs.bing.com/webmaster/december-2020/Website-Migration-with-Bing), suggest that I need to use The Site Move tool, and provides the following url: https://www.bing.com/webmaster/help/how-to-use-the-site-move-tool-bb8f5112
However, this URL is broken. Where can I find the Move Tool?
Thank you.
Hi, I am trying to move my site to a new domain on Bing Webmaster Tools. The following article from Bing (https://blogs.bing.com/webmaster/december-2020/Website-Migration-with-Bing), suggest that I need to use The Site Move tool, and provides the following url: https://www.bing.com/webmaster/help/how-to-use-the-site-move-tool-bb8f5112 However, this URL is broken. Where can I find the Move Tool?Thank you. Read More
جـلب الـحبيب < مكة☎️ 33859487 :973 +| مـعالج و شيــخ روحـــاني بحريني السعودية KSA
جـلب الـحبيب < مكة:telephone: 33859487 :973 +| مـعالج و شيــخ روحـــاني بحريني السعودية KSA
جـلب الـحبيب < مكة:telephone: 33859487 :973 +| مـعالج و شيــخ روحـــاني بحريني السعودية KSA Read More
عمل جلب الحبيـب☎️ ٠٠٩٧٣٣٤٣٢٤٩٣٥ الـكـويـت _ الـسعـوديـة
عمل جلب الحبيـب:telephone: ٠٠٩٧٣٣٤٣٢٤٩٣٥ الـكـويـت _ الـسعـوديـة
عمل جلب الحبيـب:telephone: ٠٠٩٧٣٣٤٣٢٤٩٣٥ الـكـويـت _ الـسعـوديـة Read More
maximum clique problem solve
Maximum Clique
People in the social network are identified by unique IDs, consecutive integers from 1 to N. Who follows who is captured in a cell array called sn: the ii th element of sn is a vector that contains a list of IDs the person with ID ii follows. You may assume that these lists are ordered in ascending order by ID. Note that the follows relationship is not necessarily symmetrical: if person A follows person B, person B may or may not follow person A. :
function clique = max_clique(graph, clique)
if nargin < 2
clique = [];
end
max_clq = clique;
if isempty(clique)
for ii= 1:length(graph)
clq = max_clique(graph,ii);
if length(clq) > length(max_clq)
max_clq = clq;
end
end
else
for node=1:length(graph)
if isempty(find(node==clique))
if check_clique(clique,node,graph)
clq = max_clique(graph, [clique node]);
if length(clq) > length(max_clq)
max_clique == clq
end
end
end
end
end
clique = max_clq;
end
function ok = check_clique(clq,node,graph)
ok = false;
for ii=1:length(clq)
if isempty(find(clq(ii) == graph{node})) || isempty (find(node == graph{clq(ii)}))
return;
end
end
ok = true;
end
Unfortunately, it is too slow and the grader will time out. Your task is to modify the code to speed it up. Remember, the question to ask: am I doing any unncessary work? Call the modified function max_clique. (Hint: when we try to expand the current clique, do we really need to consider all the nodes?)
Please solve this problem with entire new code that is fast.Maximum Clique
People in the social network are identified by unique IDs, consecutive integers from 1 to N. Who follows who is captured in a cell array called sn: the ii th element of sn is a vector that contains a list of IDs the person with ID ii follows. You may assume that these lists are ordered in ascending order by ID. Note that the follows relationship is not necessarily symmetrical: if person A follows person B, person B may or may not follow person A. :
function clique = max_clique(graph, clique)
if nargin < 2
clique = [];
end
max_clq = clique;
if isempty(clique)
for ii= 1:length(graph)
clq = max_clique(graph,ii);
if length(clq) > length(max_clq)
max_clq = clq;
end
end
else
for node=1:length(graph)
if isempty(find(node==clique))
if check_clique(clique,node,graph)
clq = max_clique(graph, [clique node]);
if length(clq) > length(max_clq)
max_clique == clq
end
end
end
end
end
clique = max_clq;
end
function ok = check_clique(clq,node,graph)
ok = false;
for ii=1:length(clq)
if isempty(find(clq(ii) == graph{node})) || isempty (find(node == graph{clq(ii)}))
return;
end
end
ok = true;
end
Unfortunately, it is too slow and the grader will time out. Your task is to modify the code to speed it up. Remember, the question to ask: am I doing any unncessary work? Call the modified function max_clique. (Hint: when we try to expand the current clique, do we really need to consider all the nodes?)
Please solve this problem with entire new code that is fast. Maximum Clique
People in the social network are identified by unique IDs, consecutive integers from 1 to N. Who follows who is captured in a cell array called sn: the ii th element of sn is a vector that contains a list of IDs the person with ID ii follows. You may assume that these lists are ordered in ascending order by ID. Note that the follows relationship is not necessarily symmetrical: if person A follows person B, person B may or may not follow person A. :
function clique = max_clique(graph, clique)
if nargin < 2
clique = [];
end
max_clq = clique;
if isempty(clique)
for ii= 1:length(graph)
clq = max_clique(graph,ii);
if length(clq) > length(max_clq)
max_clq = clq;
end
end
else
for node=1:length(graph)
if isempty(find(node==clique))
if check_clique(clique,node,graph)
clq = max_clique(graph, [clique node]);
if length(clq) > length(max_clq)
max_clique == clq
end
end
end
end
end
clique = max_clq;
end
function ok = check_clique(clq,node,graph)
ok = false;
for ii=1:length(clq)
if isempty(find(clq(ii) == graph{node})) || isempty (find(node == graph{clq(ii)}))
return;
end
end
ok = true;
end
Unfortunately, it is too slow and the grader will time out. Your task is to modify the code to speed it up. Remember, the question to ask: am I doing any unncessary work? Call the modified function max_clique. (Hint: when we try to expand the current clique, do we really need to consider all the nodes?)
Please solve this problem with entire new code that is fast. maximum_clique MATLAB Answers — New Questions
Profiling of inefficient recursive Fibonacci series function
I am asked to profile an intentionally inefficient code. Following code will overtime with a huge input:
function f = fibo(n)
if n <= 2
f = 1;
else
f = fibo(n-2) + fibo(n-1);
end
end
I used a persistente variable, to create an array that reflects the recursion calls:
function [f, trace]=fibo_trace(n,v)%with persistent variable ‘trc’
persistent trc;
if isempty(trc)
trc=v;
end
if n<=2
trc=[trc n];
f=1;
else
trc=[trc n];
f=fibo_trace(n-2)+fibo_trace(n-1);
end
trace=trc;
end
That works flawlessly when I run the function with followin code:
[f trace] = fibo_trace(6,[])
And this is what the code returns:
f = 8
trace = 6 4 2 3 1 2 5 3 1 2 4 2 3 1 2,
which is OK, since the trace vector shows how inefficient the original code is. Now my problem is, it is an assigment for a MOOC platform and the solution with the persistent variable won’t work because the the automated grader will run the function a number of times with random inputs and it will not clear the function. Without the persistent variable I must split the recursive calls in two code lines and I am struggling now to compute the nth fibonacci number:
Can anyone give a clue? The creation of the array works but I honestly don’t know how to deal with the two recursive call lines to compute the fibonacci.I am asked to profile an intentionally inefficient code. Following code will overtime with a huge input:
function f = fibo(n)
if n <= 2
f = 1;
else
f = fibo(n-2) + fibo(n-1);
end
end
I used a persistente variable, to create an array that reflects the recursion calls:
function [f, trace]=fibo_trace(n,v)%with persistent variable ‘trc’
persistent trc;
if isempty(trc)
trc=v;
end
if n<=2
trc=[trc n];
f=1;
else
trc=[trc n];
f=fibo_trace(n-2)+fibo_trace(n-1);
end
trace=trc;
end
That works flawlessly when I run the function with followin code:
[f trace] = fibo_trace(6,[])
And this is what the code returns:
f = 8
trace = 6 4 2 3 1 2 5 3 1 2 4 2 3 1 2,
which is OK, since the trace vector shows how inefficient the original code is. Now my problem is, it is an assigment for a MOOC platform and the solution with the persistent variable won’t work because the the automated grader will run the function a number of times with random inputs and it will not clear the function. Without the persistent variable I must split the recursive calls in two code lines and I am struggling now to compute the nth fibonacci number:
Can anyone give a clue? The creation of the array works but I honestly don’t know how to deal with the two recursive call lines to compute the fibonacci. I am asked to profile an intentionally inefficient code. Following code will overtime with a huge input:
function f = fibo(n)
if n <= 2
f = 1;
else
f = fibo(n-2) + fibo(n-1);
end
end
I used a persistente variable, to create an array that reflects the recursion calls:
function [f, trace]=fibo_trace(n,v)%with persistent variable ‘trc’
persistent trc;
if isempty(trc)
trc=v;
end
if n<=2
trc=[trc n];
f=1;
else
trc=[trc n];
f=fibo_trace(n-2)+fibo_trace(n-1);
end
trace=trc;
end
That works flawlessly when I run the function with followin code:
[f trace] = fibo_trace(6,[])
And this is what the code returns:
f = 8
trace = 6 4 2 3 1 2 5 3 1 2 4 2 3 1 2,
which is OK, since the trace vector shows how inefficient the original code is. Now my problem is, it is an assigment for a MOOC platform and the solution with the persistent variable won’t work because the the automated grader will run the function a number of times with random inputs and it will not clear the function. Without the persistent variable I must split the recursive calls in two code lines and I am struggling now to compute the nth fibonacci number:
Can anyone give a clue? The creation of the array works but I honestly don’t know how to deal with the two recursive call lines to compute the fibonacci. fibonacci, recursion, homework MATLAB Answers — New Questions
How to set up the Matrix variables to use Options = optimoptions(‘lsqcurvefit’,’algorithm’,’levenberg-marquardt’)
I have two sets of M1 and M2 vectors (1×20) of experimental values that correspond to two sets of K1 and K2 inputs (1×20) respectively. Theoretlcal values of M1 and M2 (call them M1T and M2T) have a relationship with K1 and K2 such that M1-T is a function of K1 and K2, and M2-T is also a function of K1 and K2 with a series of a1 to a6 coefficients.
I am trying to find those a1 to a6 coefficients by minimizing the error function Total Error = (M1 – M1T)^2 + (M2-M2T)^2 by the use of
options = optimoptions(‘lsqcurvefit’,’Algorithm’,’levenberg-marquardt’), however, I don’t know how to set up my variables into these names/function (i.e. don’t know the approriate coding syntax).
As an example;
the inputs are: M1 = [ i1 i2 i3 ………… i20], M2 = [ i1 i2 i3 ………….i20], K1 = [ i1 i2 i3 ………… i20], K2 = [ i1 i2 i3 ………….i20],
the relationship between theroretical values of M1, M2 and the K1 and K2 are:
M1T(i) = a1*K1(i) + a2*K1(i)*K2(i) + a3*K2(i) + a4*(K1(i))^2
M2T(i) = a2*K2(i) + a2*K1(i) + a5*(K2(i))^2 + a6*K1(i)*K2(i)I have two sets of M1 and M2 vectors (1×20) of experimental values that correspond to two sets of K1 and K2 inputs (1×20) respectively. Theoretlcal values of M1 and M2 (call them M1T and M2T) have a relationship with K1 and K2 such that M1-T is a function of K1 and K2, and M2-T is also a function of K1 and K2 with a series of a1 to a6 coefficients.
I am trying to find those a1 to a6 coefficients by minimizing the error function Total Error = (M1 – M1T)^2 + (M2-M2T)^2 by the use of
options = optimoptions(‘lsqcurvefit’,’Algorithm’,’levenberg-marquardt’), however, I don’t know how to set up my variables into these names/function (i.e. don’t know the approriate coding syntax).
As an example;
the inputs are: M1 = [ i1 i2 i3 ………… i20], M2 = [ i1 i2 i3 ………….i20], K1 = [ i1 i2 i3 ………… i20], K2 = [ i1 i2 i3 ………….i20],
the relationship between theroretical values of M1, M2 and the K1 and K2 are:
M1T(i) = a1*K1(i) + a2*K1(i)*K2(i) + a3*K2(i) + a4*(K1(i))^2
M2T(i) = a2*K2(i) + a2*K1(i) + a5*(K2(i))^2 + a6*K1(i)*K2(i) I have two sets of M1 and M2 vectors (1×20) of experimental values that correspond to two sets of K1 and K2 inputs (1×20) respectively. Theoretlcal values of M1 and M2 (call them M1T and M2T) have a relationship with K1 and K2 such that M1-T is a function of K1 and K2, and M2-T is also a function of K1 and K2 with a series of a1 to a6 coefficients.
I am trying to find those a1 to a6 coefficients by minimizing the error function Total Error = (M1 – M1T)^2 + (M2-M2T)^2 by the use of
options = optimoptions(‘lsqcurvefit’,’Algorithm’,’levenberg-marquardt’), however, I don’t know how to set up my variables into these names/function (i.e. don’t know the approriate coding syntax).
As an example;
the inputs are: M1 = [ i1 i2 i3 ………… i20], M2 = [ i1 i2 i3 ………….i20], K1 = [ i1 i2 i3 ………… i20], K2 = [ i1 i2 i3 ………….i20],
the relationship between theroretical values of M1, M2 and the K1 and K2 are:
M1T(i) = a1*K1(i) + a2*K1(i)*K2(i) + a3*K2(i) + a4*(K1(i))^2
M2T(i) = a2*K2(i) + a2*K1(i) + a5*(K2(i))^2 + a6*K1(i)*K2(i) optimization, minimization algorithm MATLAB Answers — New Questions
جـلب الـحبيب < النافر☎️ 555849264 :966 +| مـعالج و شيــخ روحـــاني سعودي السعودية K.S.A
جـلب الـحبيب < النافر:telephone: 555849264 :966 +| مـعالج و شيــخ روحـــاني سعودي السعودية K.S.A
جـلب الـحبيب < النافر:telephone: 555849264 :966 +| مـعالج و شيــخ روحـــاني سعودي السعودية K.S.A
جـلب الـحبيب < النافر:telephone: 555849264 :966 +| مـعالج و شيــخ روحـــاني سعودي السعودية K.S.Aجـلب الـحبيب < النافر:telephone: 555849264 :966 +| مـعالج و شيــخ روحـــاني سعودي السعودية K.S.A Read More
<img src="https://techcommunity.microsoft.com/t5/image/serverpage/image-id/604165i12048B90D5C443D4/image-size/large?v=v2&px=999" title="جـلب الـحبيب
Graph API with expand only bringing max 100 rows even though top=999
When I use the following endpoint, it returns 999 rows for each page which is expected.
https://graph.microsoft.com/v1.0/groups?$top=999&$select=id,displayName
However, as soon as I expand owners, it reduces the number of rows per page down to 100 (even though I’ve got top=999).
Can anyone help me understand why this is happening, and any workaround to get the full 999 rows per page with owners extended?
I know how to handle paging using nextLink, etc. However, I have ~100k groups, so getting ~1000 rows per page means only 100 API calls. With ~100 rows per page, that throws it out to 1000 API calls.
When I use the following endpoint, it returns 999 rows for each page which is expected. https://graph.microsoft.com/v1.0/groups?$top=999&$select=id,displayName However, as soon as I expand owners, it reduces the number of rows per page down to 100 (even though I’ve got top=999). https://graph.microsoft.com/v1.0/groups?$top=999&$select=id,displayName&$expand=owners($select=displayName) Can anyone help me understand why this is happening, and any workaround to get the full 999 rows per page with owners extended? I know how to handle paging using nextLink, etc. However, I have ~100k groups, so getting ~1000 rows per page means only 100 API calls. With ~100 rows per page, that throws it out to 1000 API calls. Read More
جلب الحبيب بقوة🔴33766836 :973 +🟢سحر الجلب و سحر الزواج السعودية
جلب الحبيب بقوة:red_circle:33766836 :973 +🟢سحر الجلب و سحر الزواج السعودية
جلب الحبيب بقوة:red_circle:33766836 :973 +🟢سحر الجلب و سحر الزواج السعودية Read More
ouvrir ma boîte mail
Bonjour,
Je n’arrive plus à me connecter à mon compte outlook perso, alors qu’il n’y a pas de pb à l’ouverture de mon compte outlook pro, comment puis-je faire ?
Bonjour, Je n’arrive plus à me connecter à mon compte outlook perso, alors qu’il n’y a pas de pb à l’ouverture de mon compte outlook pro, comment puis-je faire ? Read More
جلب الحبيب السعودية🔴33766836 :973 +🟢سحر الجلب و سحر الزواج البحرين
جلب الحبيب السعودية:red_circle:33766836 :973 +🟢سحر الجلب و سحر الزواج البحرين
جلب الحبيب السعودية:red_circle:33766836 :973 +🟢سحر الجلب و سحر الزواج البحرين Read More
Strange conditional formatting results being returned
It’s puzzling why blank cells are being formatted also…
Using….
Format only cells that contain
Cell value / greater than / =I5
Fill colour = yellow
There should only be one cell (70.000) highlighted
When a dummy sheet was created for testing purposes there were no issues.
Anyone any idea what is causing this?
It’s puzzling why blank cells are being formatted also… Using….Format only cells that containCell value / greater than / =I5 Fill colour = yellow There should only be one cell (70.000) highlighted When a dummy sheet was created for testing purposes there were no issues. Anyone any idea what is causing this? Read More
How to use New-ComplianceSearchAction -Export to export results to sharepoint,download them locally?
We need to do a compliance project. We want to export the search results to a specific location (such as SharePoint) through PowerShell, and then download them locally. How do I use the PowerShell command New-ComplianceSearchAction -Export to export search results to sharepoint and then download them locally? Both use the PowerShell command.
I saw this sample in offical documentation:
New-ComplianceSearchAction -SearchName “Case 321 All Sites” -Export -SharePointArchiveFormat SingleZip -ExchangeArchiveFormat PerUserPst
But it doesn’t say how to export the results to a specific location (such as SharePoint) , and how to download them locally.
Any help or guidance would be greatly appreciated!
We need to do a compliance project. We want to export the search results to a specific location (such as SharePoint) through PowerShell, and then download them locally. How do I use the PowerShell command New-ComplianceSearchAction -Export to export search results to sharepoint and then download them locally? Both use the PowerShell command. I saw this sample in offical documentation: New-ComplianceSearchAction -SearchName “Case 321 All Sites” -Export -SharePointArchiveFormat SingleZip -ExchangeArchiveFormat PerUserPst But it doesn’t say how to export the results to a specific location (such as SharePoint) , and how to download them locally.Any help or guidance would be greatly appreciated! Read More
رقم شيخ روحاني☎️ 34326742 : 973 + تلفون معالج روحاني قوي
رقم شيخ روحاني:telephone: 34326742 : 973 + تلفون معالج روحاني قوي
فك السحر ، رد المطلقة ، جلب الحبيب، خواتم روحانية، عرق السواحل، فرج الضبعة، تزويج البائر، تسهيل الزواج ، علاج العقم، تفريق وطلاق ، طاعة عمياء، عقد لسان الظالم ، جلب الحبيب السعودية ، جلب الحبيب قطر ، جلب الحبيب الكويت ، جلب الحبيب الإمارات ، سحر سفلي ، سحر علوي ،جلب البنت للبنت ، جلب الشاب للشاب ، شيخ روحاني، شيخة، روحانية، ساحر، مشعوذ، سحر أسود، سحر تفريق، سحر علوي ، جلب الحبيب البحرين، جلب الحبيب عُمان
رقم شيخ روحاني:telephone: 34326742 : 973 + رقم معالج روحاني قوي
رقم شيخ روحاني:telephone: 34326742 : 973 + تلفون معالج روحاني قويفك السحر ، رد المطلقة ، جلب الحبيب، خواتم روحانية، عرق السواحل، فرج الضبعة، تزويج البائر، تسهيل الزواج ، علاج العقم، تفريق وطلاق ، طاعة عمياء، عقد لسان الظالم ، جلب الحبيب السعودية ، جلب الحبيب قطر ، جلب الحبيب الكويت ، جلب الحبيب الإمارات ، سحر سفلي ، سحر علوي ،جلب البنت للبنت ، جلب الشاب للشاب ، شيخ روحاني، شيخة، روحانية، ساحر، مشعوذ، سحر أسود، سحر تفريق، سحر علوي ، جلب الحبيب البحرين، جلب الحبيب عُمانرقم شيخ روحاني:telephone: 34326742 : 973 + رقم معالج روحاني قوي Read More
