Month: August 2024
Radiation pattern plot of a linear array using array factor.
I want to plot a rectangular cartesion coordinates plot of radiation pattern of a uniform linear array using its array factor formula but it does not give me the exact plot kindly help
below is my code
clc;clear all;
lambda=0.03;
An = 1;
d=0.5*lambda;
k=(2*pi)/lambda;
N=30;
j = sqrt(-1);
AF = zeros(1,360);
for theta=1:360
deg2rad(theta) = (theta*pi)/180;
for n=0:N-1
for beta=1:2*pi
AF(theta)= AF(theta)+An*exp(j*k*N*d*cos(theta)+beta);%%% ARRAY FACTOR
end
end
AF(theta)=abs(AF(theta));
y=10*log(AF(theta))%% FOR DB SCALE
end
plot(theta,AF)I want to plot a rectangular cartesion coordinates plot of radiation pattern of a uniform linear array using its array factor formula but it does not give me the exact plot kindly help
below is my code
clc;clear all;
lambda=0.03;
An = 1;
d=0.5*lambda;
k=(2*pi)/lambda;
N=30;
j = sqrt(-1);
AF = zeros(1,360);
for theta=1:360
deg2rad(theta) = (theta*pi)/180;
for n=0:N-1
for beta=1:2*pi
AF(theta)= AF(theta)+An*exp(j*k*N*d*cos(theta)+beta);%%% ARRAY FACTOR
end
end
AF(theta)=abs(AF(theta));
y=10*log(AF(theta))%% FOR DB SCALE
end
plot(theta,AF) I want to plot a rectangular cartesion coordinates plot of radiation pattern of a uniform linear array using its array factor formula but it does not give me the exact plot kindly help
below is my code
clc;clear all;
lambda=0.03;
An = 1;
d=0.5*lambda;
k=(2*pi)/lambda;
N=30;
j = sqrt(-1);
AF = zeros(1,360);
for theta=1:360
deg2rad(theta) = (theta*pi)/180;
for n=0:N-1
for beta=1:2*pi
AF(theta)= AF(theta)+An*exp(j*k*N*d*cos(theta)+beta);%%% ARRAY FACTOR
end
end
AF(theta)=abs(AF(theta));
y=10*log(AF(theta))%% FOR DB SCALE
end
plot(theta,AF) linear array MATLAB Answers — New Questions
Report Detailing Unlicensed OneDrive for Business Accounts Available
Microsoft announced their plan to charge for unlicensed OneDrive for Business accounts in July. Now we have an unlicensed OneDrive accounts report in the SharePoint Online admin center. The report divides unlicensed OneDrive accounts into four categories and it’s up to Microsoft 365 tenant administrators to figure out whether to retain or remove unlicensed accounts before automatic archival comes into force in January 2025.
https://office365itpros.com/2024/08/22/unlicensed-onedrive-account-report/
Microsoft announced their plan to charge for unlicensed OneDrive for Business accounts in July. Now we have an unlicensed OneDrive accounts report in the SharePoint Online admin center. The report divides unlicensed OneDrive accounts into four categories and it’s up to Microsoft 365 tenant administrators to figure out whether to retain or remove unlicensed accounts before automatic archival comes into force in January 2025.
https://office365itpros.com/2024/08/22/unlicensed-onedrive-account-report/ Read More
How to Handle an Unwanted Sensitivity Label
Sometimes sensitivity labels defined for use within a Microsoft 365 tenant turn out to be unnecessary. The question then is what to do with these unwanted sensitivity labels. The answer is to pause for thought, gather information, and then make an informed decision, all of which we discuss here.
https://practical365.com/how-to-handle-an-unwanted-sensitivity-label/
Sometimes sensitivity labels defined for use within a Microsoft 365 tenant turn out to be unnecessary. The question then is what to do with these unwanted sensitivity labels. The answer is to pause for thought, gather information, and then make an informed decision, all of which we discuss here.
https://practical365.com/how-to-handle-an-unwanted-sensitivity-label/ Read More
How to reset Windows 7 password without losing data?
Hi team,
I have an old Windows 7 PC as device for data backup and running old 32-bit apps. Unfortunately, I forgot Windows 7 password and unable to login because it has never been used for months. I made a password reset disk on another Windows 11 laptop, but it is not recognized as a valid password reset disk when connecting to Windows 7 PC.
Is there any way to reset Windows 7 password without losing data? I have some very important files on the Desktop and hope someone could help me on this issue.
Best Regards,
Jonaham
Hi team, I have an old Windows 7 PC as device for data backup and running old 32-bit apps. Unfortunately, I forgot Windows 7 password and unable to login because it has never been used for months. I made a password reset disk on another Windows 11 laptop, but it is not recognized as a valid password reset disk when connecting to Windows 7 PC. Is there any way to reset Windows 7 password without losing data? I have some very important files on the Desktop and hope someone could help me on this issue. Best Regards,Jonaham Read More
Graph API: Is there an endpoint for Teams Call Queues and Auto Attendants.
Good day,
Is there in Graph API any endpoints to get all data from Call Queues and Auto Attendants?
Kind regards
Wim
Good day, Is there in Graph API any endpoints to get all data from Call Queues and Auto Attendants? Kind regardsWim Read More
watchlist with contains
Hi Team,
can someone help me. I have a list of dynamic Dns domain and performing KQL with _Im_Dns table.
I have created watchlist of domain and apply to _Im_Dns table. So i am getting the result if exact match in DnsQuery column. Like in my watchlist if microsoft.com is dynamic domain then it getting result only when DnsQuery column has microsoft.com. But my concern is that i want to get result if DnsQuery column has xyz.microsoft.com.Abc.
let DynamicDns = _GetWatchlist(‘dynamic_dns’) | project SearchKey;
_Im_Dns
| where DnsQuery in~ (DynamicDns)
My watchlist have 30k+ dynamic DNS. Kindly suggest us.
Hi Team, can someone help me. I have a list of dynamic Dns domain and performing KQL with _Im_Dns table.I have created watchlist of domain and apply to _Im_Dns table. So i am getting the result if exact match in DnsQuery column. Like in my watchlist if microsoft.com is dynamic domain then it getting result only when DnsQuery column has microsoft.com. But my concern is that i want to get result if DnsQuery column has xyz.microsoft.com.Abc. let DynamicDns = _GetWatchlist(‘dynamic_dns’) | project SearchKey;_Im_Dns| where DnsQuery in~ (DynamicDns) My watchlist have 30k+ dynamic DNS. Kindly suggest us. Read More
app.Context.channel.displayName not working
Hi,
We have a tab application which is added the new teams channel where we read channel name through TeamsJS SDK . We could see app.Context.channel.displayName returning “General” as channel name for the first channel created in Teams and not returning actual value.
Need your help on this
Thanks,
Mithun
Hi,We have a tab application which is added the new teams channel where we read channel name through TeamsJS SDK . We could see app.Context.channel.displayName returning “General” as channel name for the first channel created in Teams and not returning actual value.Need your help on this Thanks,Mithun Read More
Deactivate user main email address
Hello,
An organisation I work for wants all employees to use shared mailboxes. There’s a lot of staff turnover and they want to be able to easily ensure business continuity by reassigning the shared mailbox to new arrivals.
Users therefore end up with two mailboxes: their personal mailbox and the shared mailbox.
I’m afraid they’ll use both boxes at the same time and I’d like to be able to disable the use of the personal email address and keep only the shared box.
Is there a solution for this?
Thank you in advance,
John
Hello,An organisation I work for wants all employees to use shared mailboxes. There’s a lot of staff turnover and they want to be able to easily ensure business continuity by reassigning the shared mailbox to new arrivals.Users therefore end up with two mailboxes: their personal mailbox and the shared mailbox.I’m afraid they’ll use both boxes at the same time and I’d like to be able to disable the use of the personal email address and keep only the shared box. Is there a solution for this? Thank you in advance,John Read More
Introducing SharePoint design ideas
We are excited to introduce new SharePoint design ideas feature with AI powered suggestions for improving the structure of your SharePoint content. With this feature, authors can now use Design Ideas in Microsoft SharePoint to rearrange and reformat their image section, text section, and banner webpart.
Design ideas identify the text and webpart content of the section you are currently authoring, and suggesting new layouts, backgrounds, text formatting, and image webparts to enhance your section. The author then clicks on the suggestions to try and apply different ideas.
When you click into a new section with one blank text webpart, Design ideas will offer you formatting options you can add to get started.
Once your section has additional content, Design ideas will then summarize your text to provide appropriate image webpart and background suggestions, along with basic text formatting.
When you first start an editing session, a red dot will appear in the design ideas content pane pivot to let you know it has ideas available. Click on this pivot to open the design ideas panel.
Upon this first release, Design Ideas will only be available for the following sections containing:
1 Banner webpart
1, 2, and 3 text webparts
1, 2 and 3 text and image webparts
1 blank text webpart
Features and capabilities mentioned in this blog post, are demonstrated in the following video with Sara Cummings (Microsoft) and Vesa Juvonen (Microsoft).
Frequently asked questions
When will this happen?
The feature starts rolling out to customers in August 2024 and will be available gradually worldwide by end of September.
This message is associated with Microsoft 365 Roadmap ID 124846.
How this will affect your organization:
Authors will now be able to use Design ideas on their compatible sections.
What do you need to prepare?
You do not need to do anything to prepare for this update, but you may want to let your users know about this improvement.
What is next?
Additional features and capabilities with support on new web parts which the design ideas can detect.
Content update suggestions for the long texts, for example copied from Word documents.
and more…
Thanks for reading. Please enjoy making beautiful pages with the design ideas and let us know any feedback or questions in the comments.
Microsoft Tech Community – Latest Blogs –Read More
how to change bpsk modulation by ook modulation for any distribution?
i do monti carlo simulation for bpsk but i want to do in ook modulation ,then how to change this modilation?i do monti carlo simulation for bpsk but i want to do in ook modulation ,then how to change this modilation? i do monti carlo simulation for bpsk but i want to do in ook modulation ,then how to change this modilation? i use s=2*ip -1 for bpsk. MATLAB Answers — New Questions
time domain specifications calculations from graph
from the step() inbuilt function to plot second order system response, form the graph how to mark various time domain specifications in MATLAB2022b.from the step() inbuilt function to plot second order system response, form the graph how to mark various time domain specifications in MATLAB2022b. from the step() inbuilt function to plot second order system response, form the graph how to mark various time domain specifications in MATLAB2022b. step function MATLAB Answers — New Questions
Problem with MPC Control
This is my first time using the MPC control system. I designed the ANN-MPC control system in Simulink, but there was an issue with it. Can anyone guide me through the process? Thank you in advance.This is my first time using the MPC control system. I designed the ANN-MPC control system in Simulink, but there was an issue with it. Can anyone guide me through the process? Thank you in advance. This is my first time using the MPC control system. I designed the ANN-MPC control system in Simulink, but there was an issue with it. Can anyone guide me through the process? Thank you in advance. simulink, mpc MATLAB Answers — New Questions
How to use parallel background computing for triggering a oscilloscope measurement device (VISA API, IVI-C) from a matlab GUI? (error “Cannot parse adapters.config file”)
I want to trigger and collect data of my Tektronix DPO2004B Oscilloscope (Connected via USB and VISA API using a IVI-C Driver) from a Matlab GUI/App. For communication with the Oscilloscope I use the Quick-Control Oscilloscope instrument functionality (https://de.mathworks.com/help/instrument/oscilloscope.html)
If i use the function getDataFromOszilloscope() (see code below) it works fine, but the whole process of data collection takes about 7 seconds. When i call this function from a Matlab app, the execution will be blocked for a long time and other tasks can’t be handled during this time. Therefore i want to call this function in a parallel background pool. When i use f = parfeval(backgroundPool, @getDataFromOszilloscope,1); the following error occurs during the connection process inside oscilloscope().
Errormessage: Identifier "instrument:oscilloscope:failedToParseConfigFile"; "Cannot parse adapters.config file".
I guess the problem could be, that the backgroundPool uses all my Workers (6x) on the machine and this doesn’t work for this kind of device object, but i have no experience with parallel computing and scheduling. The function can be called when i use the parfeval(@getDataFromOszilloscope,1) without a backgroundPool and one Worker, but it still blocks the rest of my functionality because its not fully separated. I made a solution with the batch() function but it takes a lot of time to start the parallel pool every time i trigger the data acquisition.
Is there any way to get data from this oscilloscope without blocking the execution of other code inside the GUI?
%% Get data from Oszilloscope
p = backgroundPool; %Create backgroundPool
counter = 1;
numOfMeasurements = 4;
f(1:numOfMeasurements) = parallel.FevalFuture; %preallocate Future Object
%% Read specified number of measurements
while true
%Exit while loop if all measurements are collected in Background
if sum(ismember({f.State},’finished’)) == numOfMeasurements
out = fetchOutputs(f); %get data from background execution (Matlab throws error here but Problem occurs during parfeval)
break;
end
%Call Oszi at first iteration and after finishing calculation in background
if counter == 1 || strcmp(f(counter-1).State,’finished’)
disp(‘Calling getData’)
%Trigger oscilloscope for data collection in background
f(counter) = parfeval(p, @getDataFromOszilloscope,1); %Error
counter = counter+1;
end
disp(f(counter-1).State) %Output to check status of background calculation
% OTHER CODE FOR FURTHER EXECUTION IN APP WILL FOLLOW HERE
end
disp(‘END’)
%% Function for connecting to oscilloscope via installed IVI instrument driver (Uses VISA API)
% Error occurs during connection with the Oscilloscope
function data = getDataFromOszilloscope()
pause(0.1)
VisaAddress = ‘USB0::0x0699::0x039B::C020206::0::INSTR’;
IVI_Driver = ‘Tkdpo2k3k4k’;
myScope = oscilloscope(VisaAddress,IVI_Driver); %THE ERROR OCCURS HERE WHEN EXECUTED IN BACKGROUND!
data = readWaveform(myScope,’acquisition’, true); %Get Data from Oscilloscope
end
Further information:
Hardware + Driver:
Oscilloscope Tektronix DPO2004B
– IVI-C Driver Tkdpo2k3k4k v1.5 https://www.tek.com/en/support/software/driver/dpo2000-mso2000-dpo3000-and-dpo4000-mso3000-and-mso4000-mdo3000-and
Used Software:
Matlab R2023b
Matlab Instrument Toolbox
Instrument Control Toolbox Support Package for National Instruments VISA and ICP Interfaces https://de.mathworks.com/help/instrument/install-the-national-instruments-visa-and-icp-interfaces-support-package.html
NI-VISA software packages (installed with the VISA instrument control toolbox).I want to trigger and collect data of my Tektronix DPO2004B Oscilloscope (Connected via USB and VISA API using a IVI-C Driver) from a Matlab GUI/App. For communication with the Oscilloscope I use the Quick-Control Oscilloscope instrument functionality (https://de.mathworks.com/help/instrument/oscilloscope.html)
If i use the function getDataFromOszilloscope() (see code below) it works fine, but the whole process of data collection takes about 7 seconds. When i call this function from a Matlab app, the execution will be blocked for a long time and other tasks can’t be handled during this time. Therefore i want to call this function in a parallel background pool. When i use f = parfeval(backgroundPool, @getDataFromOszilloscope,1); the following error occurs during the connection process inside oscilloscope().
Errormessage: Identifier "instrument:oscilloscope:failedToParseConfigFile"; "Cannot parse adapters.config file".
I guess the problem could be, that the backgroundPool uses all my Workers (6x) on the machine and this doesn’t work for this kind of device object, but i have no experience with parallel computing and scheduling. The function can be called when i use the parfeval(@getDataFromOszilloscope,1) without a backgroundPool and one Worker, but it still blocks the rest of my functionality because its not fully separated. I made a solution with the batch() function but it takes a lot of time to start the parallel pool every time i trigger the data acquisition.
Is there any way to get data from this oscilloscope without blocking the execution of other code inside the GUI?
%% Get data from Oszilloscope
p = backgroundPool; %Create backgroundPool
counter = 1;
numOfMeasurements = 4;
f(1:numOfMeasurements) = parallel.FevalFuture; %preallocate Future Object
%% Read specified number of measurements
while true
%Exit while loop if all measurements are collected in Background
if sum(ismember({f.State},’finished’)) == numOfMeasurements
out = fetchOutputs(f); %get data from background execution (Matlab throws error here but Problem occurs during parfeval)
break;
end
%Call Oszi at first iteration and after finishing calculation in background
if counter == 1 || strcmp(f(counter-1).State,’finished’)
disp(‘Calling getData’)
%Trigger oscilloscope for data collection in background
f(counter) = parfeval(p, @getDataFromOszilloscope,1); %Error
counter = counter+1;
end
disp(f(counter-1).State) %Output to check status of background calculation
% OTHER CODE FOR FURTHER EXECUTION IN APP WILL FOLLOW HERE
end
disp(‘END’)
%% Function for connecting to oscilloscope via installed IVI instrument driver (Uses VISA API)
% Error occurs during connection with the Oscilloscope
function data = getDataFromOszilloscope()
pause(0.1)
VisaAddress = ‘USB0::0x0699::0x039B::C020206::0::INSTR’;
IVI_Driver = ‘Tkdpo2k3k4k’;
myScope = oscilloscope(VisaAddress,IVI_Driver); %THE ERROR OCCURS HERE WHEN EXECUTED IN BACKGROUND!
data = readWaveform(myScope,’acquisition’, true); %Get Data from Oscilloscope
end
Further information:
Hardware + Driver:
Oscilloscope Tektronix DPO2004B
– IVI-C Driver Tkdpo2k3k4k v1.5 https://www.tek.com/en/support/software/driver/dpo2000-mso2000-dpo3000-and-dpo4000-mso3000-and-mso4000-mdo3000-and
Used Software:
Matlab R2023b
Matlab Instrument Toolbox
Instrument Control Toolbox Support Package for National Instruments VISA and ICP Interfaces https://de.mathworks.com/help/instrument/install-the-national-instruments-visa-and-icp-interfaces-support-package.html
NI-VISA software packages (installed with the VISA instrument control toolbox). I want to trigger and collect data of my Tektronix DPO2004B Oscilloscope (Connected via USB and VISA API using a IVI-C Driver) from a Matlab GUI/App. For communication with the Oscilloscope I use the Quick-Control Oscilloscope instrument functionality (https://de.mathworks.com/help/instrument/oscilloscope.html)
If i use the function getDataFromOszilloscope() (see code below) it works fine, but the whole process of data collection takes about 7 seconds. When i call this function from a Matlab app, the execution will be blocked for a long time and other tasks can’t be handled during this time. Therefore i want to call this function in a parallel background pool. When i use f = parfeval(backgroundPool, @getDataFromOszilloscope,1); the following error occurs during the connection process inside oscilloscope().
Errormessage: Identifier "instrument:oscilloscope:failedToParseConfigFile"; "Cannot parse adapters.config file".
I guess the problem could be, that the backgroundPool uses all my Workers (6x) on the machine and this doesn’t work for this kind of device object, but i have no experience with parallel computing and scheduling. The function can be called when i use the parfeval(@getDataFromOszilloscope,1) without a backgroundPool and one Worker, but it still blocks the rest of my functionality because its not fully separated. I made a solution with the batch() function but it takes a lot of time to start the parallel pool every time i trigger the data acquisition.
Is there any way to get data from this oscilloscope without blocking the execution of other code inside the GUI?
%% Get data from Oszilloscope
p = backgroundPool; %Create backgroundPool
counter = 1;
numOfMeasurements = 4;
f(1:numOfMeasurements) = parallel.FevalFuture; %preallocate Future Object
%% Read specified number of measurements
while true
%Exit while loop if all measurements are collected in Background
if sum(ismember({f.State},’finished’)) == numOfMeasurements
out = fetchOutputs(f); %get data from background execution (Matlab throws error here but Problem occurs during parfeval)
break;
end
%Call Oszi at first iteration and after finishing calculation in background
if counter == 1 || strcmp(f(counter-1).State,’finished’)
disp(‘Calling getData’)
%Trigger oscilloscope for data collection in background
f(counter) = parfeval(p, @getDataFromOszilloscope,1); %Error
counter = counter+1;
end
disp(f(counter-1).State) %Output to check status of background calculation
% OTHER CODE FOR FURTHER EXECUTION IN APP WILL FOLLOW HERE
end
disp(‘END’)
%% Function for connecting to oscilloscope via installed IVI instrument driver (Uses VISA API)
% Error occurs during connection with the Oscilloscope
function data = getDataFromOszilloscope()
pause(0.1)
VisaAddress = ‘USB0::0x0699::0x039B::C020206::0::INSTR’;
IVI_Driver = ‘Tkdpo2k3k4k’;
myScope = oscilloscope(VisaAddress,IVI_Driver); %THE ERROR OCCURS HERE WHEN EXECUTED IN BACKGROUND!
data = readWaveform(myScope,’acquisition’, true); %Get Data from Oscilloscope
end
Further information:
Hardware + Driver:
Oscilloscope Tektronix DPO2004B
– IVI-C Driver Tkdpo2k3k4k v1.5 https://www.tek.com/en/support/software/driver/dpo2000-mso2000-dpo3000-and-dpo4000-mso3000-and-mso4000-mdo3000-and
Used Software:
Matlab R2023b
Matlab Instrument Toolbox
Instrument Control Toolbox Support Package for National Instruments VISA and ICP Interfaces https://de.mathworks.com/help/instrument/install-the-national-instruments-visa-and-icp-interfaces-support-package.html
NI-VISA software packages (installed with the VISA instrument control toolbox). parallel computing, background computing, ivi-c, tektronix, oscilloscope, visa, bocked execution MATLAB Answers — New Questions
Van der pol equation
Given the Van der pol equation
+ 𝝁 ( – 1) x + kx =0
Where 𝝁 = k = -1
Obtain the non-linear stage space representation of the system
Find the Jacobian matrix at the equilibrium point
Use the Lyaponov direct method to check for the stability of the system
(Hint V(x)= Px : PA + P = -1)Given the Van der pol equation
+ 𝝁 ( – 1) x + kx =0
Where 𝝁 = k = -1
Obtain the non-linear stage space representation of the system
Find the Jacobian matrix at the equilibrium point
Use the Lyaponov direct method to check for the stability of the system
(Hint V(x)= Px : PA + P = -1) Given the Van der pol equation
+ 𝝁 ( – 1) x + kx =0
Where 𝝁 = k = -1
Obtain the non-linear stage space representation of the system
Find the Jacobian matrix at the equilibrium point
Use the Lyaponov direct method to check for the stability of the system
(Hint V(x)= Px : PA + P = -1) control theory ii MATLAB Answers — New Questions
How Can I Bulk Convert CR2 Images to JPG on my Windows 11 PC?
Hi all,
I’ve got a bit of a photo storage challenge on my hands. I recently took over 1000 photos with my Canon camera, and they’re all in CR2 format. While the CR2 format is great for editing, it’s not the most convenient for sharing or quick edits. I’m looking for an efficient way to bulk convert CR2 files to JPG on my Windows 11 PC. Ideally, I’m hoping for a solution that:
Can handle large batches without crashing.Doesn’t require me to upload files online (since my collection is pretty big).Maintains as much image quality as possible in the conversion.Is easy to use (I’m not super tech-savvy, but I can follow instructions).
Does anyone have any recommendations for methods that work well on Windows 11? I’d love to hear about your suggestions.
Hi all, I’ve got a bit of a photo storage challenge on my hands. I recently took over 1000 photos with my Canon camera, and they’re all in CR2 format. While the CR2 format is great for editing, it’s not the most convenient for sharing or quick edits. I’m looking for an efficient way to bulk convert CR2 files to JPG on my Windows 11 PC. Ideally, I’m hoping for a solution that: Can handle large batches without crashing.Doesn’t require me to upload files online (since my collection is pretty big).Maintains as much image quality as possible in the conversion.Is easy to use (I’m not super tech-savvy, but I can follow instructions). Does anyone have any recommendations for methods that work well on Windows 11? I’d love to hear about your suggestions. Read More
How to fix sales tax not calculating to shipping address issue after update?
Why isn’t sales tax being calculated based on the shipping address? This is causing incorrect totals on customer invoices. How can I resolve this?
Why isn’t sales tax being calculated based on the shipping address? This is causing incorrect totals on customer invoices. How can I resolve this? Read More
MDE Support for Ubuntu 24.04 LTS (Noble Numbat)
Hello All,
Ubuntu had released Ubuntu 24.04 LTS (Noble Numbat) in April 2024.Any idea when MDE will start supporting this version?
Hello All, Ubuntu had released Ubuntu 24.04 LTS (Noble Numbat) in April 2024.Any idea when MDE will start supporting this version? Read More
Starting as ISV
Hi,
We were just registered as ISV, and would like to get some tips.
We’re a non-US company and completing our tax profiles.
Meanwhile, can I start finding partners? Any tips on how to connect with partners?
Hi,We were just registered as ISV, and would like to get some tips.We’re a non-US company and completing our tax profiles.Meanwhile, can I start finding partners? Any tips on how to connect with partners? Read More
We have multiple Licenses I want to Implement Conditional Access Policy
Hello Everyone,
We have multiple Licenses I want to Implement Security on all users.
I created a Group, added all Company users to this group, and assigned a P1 license to this group.
I want to Implement a Conditional Access policy to block all new users excluded from this group.
means anyone who creates a user goes into the blocked mode.
when a new user is added to an excluded group, he will access their resources.
but is this possible to mean I have doubts is it working or not please anyone let me know if this formula is working or not.
Thanks and Regards:
Fahad Gul
Hello Everyone, We have multiple Licenses I want to Implement Security on all users. I created a Group, added all Company users to this group, and assigned a P1 license to this group. I want to Implement a Conditional Access policy to block all new users excluded from this group. means anyone who creates a user goes into the blocked mode. when a new user is added to an excluded group, he will access their resources. but is this possible to mean I have doubts is it working or not please anyone let me know if this formula is working or not. Thanks and Regards:Fahad Gul Read More
How to fix sales tax not calculating based on my location issue after update?
Why is the sales tax not calculating based on my location? The rates seem incorrect and do not reflect the local tax rules for my area.
Why is the sales tax not calculating based on my location? The rates seem incorrect and do not reflect the local tax rules for my area. Read More
