Category: News
Microsoft Licenses Request
Are there any indirect providers who can assist me in providing Microsoft licenses to my customers? I am registered as a CSP Microsoft Partner and want to ensure a smooth process.
Thank you for your attention to this matter. I appreciate your prompt assistance.
Best regards,
Miftah Rizky
Are there any indirect providers who can assist me in providing Microsoft licenses to my customers? I am registered as a CSP Microsoft Partner and want to ensure a smooth process. Thank you for your attention to this matter. I appreciate your prompt assistance.Best regards,Miftah Rizky Read More
Categorization of a large, dynamic data set
I have a challenge which I can’t solve. Already tried multiple ways – makearray, byrow, etc. Nothing worked so far. Here is the challenge:
I have a large set of data (>20000 rows, dynamic). It holds a.o. segments and size of segment (a number). Let’s assume segment is in array A1# and size of segment is in array B1#. In a different table (~20 rows), all the unique segments are listed (named “Segments”). Next to this segment list, I have organized data for 3 categories (small/medium/large) for each segment. Each segment will have its own data for what is defined as small/medium/large. As such, I have 3 columns next to the segment name that holds number values for size thresholds.
In the large table, I now want to categorize each segment. Every segment (A1#) has a size (B1#) which corresponds to a category (small/medium/large) -> I.e. it needs a lookup in the category table.
I would want the formula to result in a spilled array – given the data is dynamic in nature.
Thanks for your ideas!
I have a challenge which I can’t solve. Already tried multiple ways – makearray, byrow, etc. Nothing worked so far. Here is the challenge:I have a large set of data (>20000 rows, dynamic). It holds a.o. segments and size of segment (a number). Let’s assume segment is in array A1# and size of segment is in array B1#. In a different table (~20 rows), all the unique segments are listed (named “Segments”). Next to this segment list, I have organized data for 3 categories (small/medium/large) for each segment. Each segment will have its own data for what is defined as small/medium/large. As such, I have 3 columns next to the segment name that holds number values for size thresholds.In the large table, I now want to categorize each segment. Every segment (A1#) has a size (B1#) which corresponds to a category (small/medium/large) -> I.e. it needs a lookup in the category table.I would want the formula to result in a spilled array – given the data is dynamic in nature.Thanks for your ideas! Read More
Clarification on Annual Cost and Maintenance for SQL Server with SA
Hi everyone,
I’m planning to purchase SQL Server with Software Assurance (SA). I noticed a mention of a cost of $15123, but it’s unclear whether this is a one-time payment or an annual fee. Could someone clarify the annual cost for this setup? Additionally, are there any maintenance costs that I should be aware of?
Thank you!
Hi everyone,I’m planning to purchase SQL Server with Software Assurance (SA). I noticed a mention of a cost of $15123, but it’s unclear whether this is a one-time payment or an annual fee. Could someone clarify the annual cost for this setup? Additionally, are there any maintenance costs that I should be aware of?Thank you! Read More
How can I fix Quick-Books Error UEXP
I’m encountering Quick-Books Error UEXP and need assistance in resolving it. What are the steps to troubleshoot and fix this error? Are there specific settings or updates I need to check?
I’m encountering Quick-Books Error UEXP and need assistance in resolving it. What are the steps to troubleshoot and fix this error? Are there specific settings or updates I need to check? Read More
How to build a social media assistant with Prompty and PromptFlow
How to build a social media assistant with Prompty and PromptFlow
Why Prompty.
Specification: Prompty is an asset class not tied to any language as it uses markdown format with yaml to specify your metadata. It unifies the prompt and its execution in a single package to quickly get started.
Tooling: using the Prompty extension, you can quickly get started in your coding environment and set up your configuration. It enables you to work with prompts at a high level with additional features such as metadata autocompletion, syntax highlighting, quick run and validation.
Runtime: Prompty additionally generates code for you in different frameworks e.g. LangChain, PromptFlow and Semantic Kernel. the asset class easily helps you convert to code simplifying your workflow as it is language agnostic.
Prerequisites and Authentication
To get started, you need to create a new Azure OpenAI resource on the Azure OpenAI Studio.
Once you create the resource, head over to Azure OpenAI Studio and create a gpt-35-turbo model deployment.
The first, and easiest way, to get started is by using environment variables. In your local environment, create a .env file, where you store your keys and endpoints. Your .env file, should be something like this:
AZURE_OPENAI_DEPLOYMENT_NAME = “”
AZURE_OPENAI_API_VERSION = “”
AZURE_OPENAI_API_VERSION = “”
AZURE_OPENAI_ENDPOINT =””
type: azure_openai
azure_deployment: ${env:AZURE_OPENAI_DEPLOYMENT_NAME}
api_version: ${env:AZURE_OPENAI_API_VERSION}
azure_endpoint: ${env:AZURE_OPENAI_ENDPOINT}
You can also, login to your Azure account using azd auth login –use-device-code, this will allow you to define your model configurations and update your settings.json files, allowing you to access your configurations without using environment variable.
Getting Started with Prompty
Install the Prompty extension
Right-click on the VSCode explorer and select “New Prompty.” This will create a new Prompty file in markdown format.
Configure your application metadata, in this case we will update as follows:
name: SociallyPrompt
description: An AI assistant designed to help you create engaging Twitter and LinkedIn posts
authors:
model:
azure_endpoint: azure_openai
azure_deployment: gpt-35-turbo
parameters:
max_tokens: 3000
temperature: 0.9
sample:
blog_title: LLM based development tools – PromptFlow vs LangChain vs Semantic Kernel
blog_link: https://techcommunity.microsoft.com/t5/educator-developer-blog/llm-based-development-tools-promptflow-vs-langchain-vs-semantic/ba-p/4149252
call_to_action: GitHub Sample Code at https://github.com/BethanyJep/Swahili-Tutor
post type: Twitter
Update your application instructions, use examples where necessary, for example, below is a sample instruction for our social media assistant:
You are an Social Media AI assistant who helps people create engaging content for Twitter. As the assistant,
you keep the tweets concise – remember that 280-character limit! Inject enthusiasm into your posts!
Use relevant hashtags to boost visibility for the posts. And have a call to action or even add some personal flair with appropriate emojis.
# Context
I am an AI assistant designed to help you create engaging Twitter and LinkedIn posts. I can help you create posts for a variety of topics, including technology, education, and more. I can also help you create posts for blog posts, articles, and other content you want to share on social media.
user:
{{post_type}} post for the blog post titled “{{blog_title}}” found at {{blog_link}} with the call to action “{{call_to_action}}”.
Once done click the run button to run your Prompty in the terminal
Extending functionality with Promptflow
Tracing your Flow
Resources
Our Social Media Assistant Prompty: BethanyJep/social-media-assistant-prompty (github.com)
Microsoft Build: Practical End-to-End AI Development using Prompty and AI Studio (microsoft.com)
Prompty samples: Collections | Microsoft Learn
Prompty documentations: prompty.ai
Microsoft Tech Community – Latest Blogs –Read More
I am getting error not enough input arguments.
function fval=massSpringFun(t,y)
%Function for mass-spring system
%Define constants
m=1;
c=0.001;
k=100;
h=0.01;
x1=0.01;
x2=0;
%This set of ODEs will be solved using ode45
x1=y(1);
v1=y(2);
x2=y(3);
v2=y(4);
%Definr dy/dt
fval(1,1)=v;
fval(2,1)=(k/m)*(x1-x2)-(c/h)*v2;
%To run the mass spring system
y0=[1;0];
tspan=[0 10];
[tsol,ysol]=ode45(@(t,y)massSpringFun(t,y),tspan,y0);
plot(tsol,ysol(:,1));function fval=massSpringFun(t,y)
%Function for mass-spring system
%Define constants
m=1;
c=0.001;
k=100;
h=0.01;
x1=0.01;
x2=0;
%This set of ODEs will be solved using ode45
x1=y(1);
v1=y(2);
x2=y(3);
v2=y(4);
%Definr dy/dt
fval(1,1)=v;
fval(2,1)=(k/m)*(x1-x2)-(c/h)*v2;
%To run the mass spring system
y0=[1;0];
tspan=[0 10];
[tsol,ysol]=ode45(@(t,y)massSpringFun(t,y),tspan,y0);
plot(tsol,ysol(:,1)); function fval=massSpringFun(t,y)
%Function for mass-spring system
%Define constants
m=1;
c=0.001;
k=100;
h=0.01;
x1=0.01;
x2=0;
%This set of ODEs will be solved using ode45
x1=y(1);
v1=y(2);
x2=y(3);
v2=y(4);
%Definr dy/dt
fval(1,1)=v;
fval(2,1)=(k/m)*(x1-x2)-(c/h)*v2;
%To run the mass spring system
y0=[1;0];
tspan=[0 10];
[tsol,ysol]=ode45(@(t,y)massSpringFun(t,y),tspan,y0);
plot(tsol,ysol(:,1)); ode45 MATLAB Answers — New Questions
S-Funtion for add Model Expolorer parameters
Hello,
I am trying add Simulink Parameter with simulink block. For this I want to use s-function and take this s-function in the simulink block.This block will be include paramter name , parameter data type , initial value and all time it will be Exported To Global.
Can you help me with this? If you have another solution please share with me thank you.Hello,
I am trying add Simulink Parameter with simulink block. For this I want to use s-function and take this s-function in the simulink block.This block will be include paramter name , parameter data type , initial value and all time it will be Exported To Global.
Can you help me with this? If you have another solution please share with me thank you. Hello,
I am trying add Simulink Parameter with simulink block. For this I want to use s-function and take this s-function in the simulink block.This block will be include paramter name , parameter data type , initial value and all time it will be Exported To Global.
Can you help me with this? If you have another solution please share with me thank you. s-function, mex, mask, simulink, matlab, .m MATLAB Answers — New Questions
Simscape: switch subsystem during simulation
Hello, I have a variant-subsystem that contains physical elements.
Variant 1 should be active for the first 25% of the simulation.
Variant 2 should be active for 50%.
The remaining 25% of the simulation should be active again in variant 1.
How can I do that? Unfortunately, the Atomic subsystem doesn’t work. I have set up the variant subsystem, but I find it very complicated to set this up correctly. I ask for help.Hello, I have a variant-subsystem that contains physical elements.
Variant 1 should be active for the first 25% of the simulation.
Variant 2 should be active for 50%.
The remaining 25% of the simulation should be active again in variant 1.
How can I do that? Unfortunately, the Atomic subsystem doesn’t work. I have set up the variant subsystem, but I find it very complicated to set this up correctly. I ask for help. Hello, I have a variant-subsystem that contains physical elements.
Variant 1 should be active for the first 25% of the simulation.
Variant 2 should be active for 50%.
The remaining 25% of the simulation should be active again in variant 1.
How can I do that? Unfortunately, the Atomic subsystem doesn’t work. I have set up the variant subsystem, but I find it very complicated to set this up correctly. I ask for help. variant subystem, simscape MATLAB Answers — New Questions
Using FInd Peak function but not getting required values
Using the find peak function o locate the Highest maximum and lowest minimum values in three Phases. but in last Phase not getting the required output even calling all phase with a same function. Seconldy getting the 50 % decay values in negative. Kindly guide me what is wrong in my code. I am sharing my script and GUI file and screenshotUsing the find peak function o locate the Highest maximum and lowest minimum values in three Phases. but in last Phase not getting the required output even calling all phase with a same function. Seconldy getting the 50 % decay values in negative. Kindly guide me what is wrong in my code. I am sharing my script and GUI file and screenshot Using the find peak function o locate the Highest maximum and lowest minimum values in three Phases. but in last Phase not getting the required output even calling all phase with a same function. Seconldy getting the 50 % decay values in negative. Kindly guide me what is wrong in my code. I am sharing my script and GUI file and screenshot matlab function MATLAB Answers — New Questions
Data Store Memory to Global Workspace
Hello,
I am using a function that reads some values from a data storage memeory and writes back to data storage memory. What I want to do is writing one of these data to global workspace so that amplitude of the voltage source can be change. How can I do that?
Thanks.Hello,
I am using a function that reads some values from a data storage memeory and writes back to data storage memory. What I want to do is writing one of these data to global workspace so that amplitude of the voltage source can be change. How can I do that?
Thanks. Hello,
I am using a function that reads some values from a data storage memeory and writes back to data storage memory. What I want to do is writing one of these data to global workspace so that amplitude of the voltage source can be change. How can I do that?
Thanks. data storage memory MATLAB Answers — New Questions
Configuring ADF Pipeline to Fetch and Store Large Tables as Single JSON Files
I have 14 tables on a client server that need to be fetched using REST API calls. Each table contains between 71 and 800,000 rows, but the page size for fetching data is limited to 100 rows. The REST API does not provide a nextPage link; instead, it uses the parameter “startRow” to specify the starting row for each page. For example, setting startRow=101 fetches rows 101-200.
Our goal is to copy the tables from the REST API connector to ADLS storage as .json files and then transfer the data to a SQL Server. Each table should be stored as a single .json file in ADLS, despite being fetched in multiple pages. Thus, we need 14 .json files, one for each table, in the ADLS storage folder.
Could someone guide me on how to configure the copy data activity’s source and sink to achieve this? Any leads would be greatly appreciated.
#ADF #copyactivity #pagination
I have 14 tables on a client server that need to be fetched using REST API calls. Each table contains between 71 and 800,000 rows, but the page size for fetching data is limited to 100 rows. The REST API does not provide a nextPage link; instead, it uses the parameter “startRow” to specify the starting row for each page. For example, setting startRow=101 fetches rows 101-200.Our goal is to copy the tables from the REST API connector to ADLS storage as .json files and then transfer the data to a SQL Server. Each table should be stored as a single .json file in ADLS, despite being fetched in multiple pages. Thus, we need 14 .json files, one for each table, in the ADLS storage folder.Could someone guide me on how to configure the copy data activity’s source and sink to achieve this? Any leads would be greatly appreciated.#ADF #copyactivity #pagination Read More
Rounding a Date down if it doesn’t exist in Month
Hi,
I am trying to round any date in a series that doesn’t exist (e.g if 31st doesn’t exist in month, round down to 30, if it’s 31st in Feb, round down to 29, etc) in a month down.
Ex (Array 1):
2024-02-31
2024-04-31
2024-08-31
2024-09-31
Formula should output the following from Array 1 (e.g rounding down to closest date):
2024-02-29
2024-04-30
2024-08-31
2024-09-30
Any ideas on how this can be done? My thanks in advance.
Hi, I am trying to round any date in a series that doesn’t exist (e.g if 31st doesn’t exist in month, round down to 30, if it’s 31st in Feb, round down to 29, etc) in a month down. Ex (Array 1):2024-02-312024-04-312024-08-312024-09-31Formula should output the following from Array 1 (e.g rounding down to closest date):2024-02-292024-04-302024-08-312024-09-30Any ideas on how this can be done? My thanks in advance. Read More
Calculate mean of all variables that have a mean
I have a table with mixed types of variables. I want to calculate the mean of any variable that can have a mean without converting to another type- so just numericals, logicals, etc. and leave string types alone. I do not want to specify which ones to find the mean for because I will probably add variables to this table eventually. The AI made up this apparently fake option, which is what I am looking for: ‘Exclude’, {‘StringVar’}I have a table with mixed types of variables. I want to calculate the mean of any variable that can have a mean without converting to another type- so just numericals, logicals, etc. and leave string types alone. I do not want to specify which ones to find the mean for because I will probably add variables to this table eventually. The AI made up this apparently fake option, which is what I am looking for: ‘Exclude’, {‘StringVar’} I have a table with mixed types of variables. I want to calculate the mean of any variable that can have a mean without converting to another type- so just numericals, logicals, etc. and leave string types alone. I do not want to specify which ones to find the mean for because I will probably add variables to this table eventually. The AI made up this apparently fake option, which is what I am looking for: ‘Exclude’, {‘StringVar’} table MATLAB Answers — New Questions
Find input to function 1 that results in function 2 returning 0
Hello,
I have a function that traces raypaths given input criteria. I then have a second function that solves for error at a given point in space. I am able to find the launch angles that would result in bracketing the target.
My question is this: having solved for launch angles that bracket the point, how do I find the launch angle that results in zero error? An excerpt of the code I am working with is below
rayangle = (-90:.1:90)
nray=length(rayangle)
for ii=1:nray
theta0=rayangle(ii)
z_r=raysolver(z0,theta0,cmat,nstep,rstep); %calling the function that traces the rays
z_r_theta0(ii,:)=z_r(1,:); %Saving the path of each ray in z_r_theta0
end
%% Finding error
%target co-ordinates
r=50000;
z=1100;
d_error=deptherror(r,z,z_r_theta0); %gives me depth error for each launch angle
bracket_ray=crossray(d_error)%this gives me all the launch angles that bracket the target.
%what I need is to find theta0 for each set of bracketing launch angles
%that result in d_error == 0Hello,
I have a function that traces raypaths given input criteria. I then have a second function that solves for error at a given point in space. I am able to find the launch angles that would result in bracketing the target.
My question is this: having solved for launch angles that bracket the point, how do I find the launch angle that results in zero error? An excerpt of the code I am working with is below
rayangle = (-90:.1:90)
nray=length(rayangle)
for ii=1:nray
theta0=rayangle(ii)
z_r=raysolver(z0,theta0,cmat,nstep,rstep); %calling the function that traces the rays
z_r_theta0(ii,:)=z_r(1,:); %Saving the path of each ray in z_r_theta0
end
%% Finding error
%target co-ordinates
r=50000;
z=1100;
d_error=deptherror(r,z,z_r_theta0); %gives me depth error for each launch angle
bracket_ray=crossray(d_error)%this gives me all the launch angles that bracket the target.
%what I need is to find theta0 for each set of bracketing launch angles
%that result in d_error == 0 Hello,
I have a function that traces raypaths given input criteria. I then have a second function that solves for error at a given point in space. I am able to find the launch angles that would result in bracketing the target.
My question is this: having solved for launch angles that bracket the point, how do I find the launch angle that results in zero error? An excerpt of the code I am working with is below
rayangle = (-90:.1:90)
nray=length(rayangle)
for ii=1:nray
theta0=rayangle(ii)
z_r=raysolver(z0,theta0,cmat,nstep,rstep); %calling the function that traces the rays
z_r_theta0(ii,:)=z_r(1,:); %Saving the path of each ray in z_r_theta0
end
%% Finding error
%target co-ordinates
r=50000;
z=1100;
d_error=deptherror(r,z,z_r_theta0); %gives me depth error for each launch angle
bracket_ray=crossray(d_error)%this gives me all the launch angles that bracket the target.
%what I need is to find theta0 for each set of bracketing launch angles
%that result in d_error == 0 zero solver MATLAB Answers — New Questions
while executing Polyspace Bugfinder and code prover we are getting this Error: identifier “Float64” is undefined
while executing Polyspace Bugfinder and code prover we are getting this Error: identifier "Float64" is undefinedwhile executing Polyspace Bugfinder and code prover we are getting this Error: identifier "Float64" is undefined while executing Polyspace Bugfinder and code prover we are getting this Error: identifier "Float64" is undefined polyspace, matlab MATLAB Answers — New Questions
Sync button on specific folder is gone.
Hi,
I received complaint from users that the sync button when selecting specific folder is gone. I’ve tried it on my end and confirmed that there are some changes in the UI of onedrive.
Is there something we can do to set it back where the sync button for specific folder is appearing?
I’m aware that there’s a sync button on the gear icon(settings).
Thank you.
Hi, I received complaint from users that the sync button when selecting specific folder is gone. I’ve tried it on my end and confirmed that there are some changes in the UI of onedrive. Is there something we can do to set it back where the sync button for specific folder is appearing? I’m aware that there’s a sync button on the gear icon(settings). Thank you. Read More
Copilot unable to change word document content?
I just purchased the first license for my organisation and am trialing it after reviewing the Microsoft promo material. The promo material had it writing copy, formating and inserting images and all sorts of stuff.
I purchased a license mainly because we burn a lot of time in my company doing something I would thought would be simple for Copilot, fixing document styles and formatting. We write a lot of documents for clients using their templates and this often means we’re merging content from our own internal records into client templates. So I was planning on using Copilot to fix styles after inserting content instead of a person spending hours making sure everything in perfect.
The very first document I try this on, I get the following message when I asked it to “Apply consistent styles and formatting to the entire document” (and this came up as pre-filled selection option after copying and pasting suggesting it’s capable of this):
“As Microsoft 365 Copilot, my role is to assist you within the chat interface by providing information, guidance, and support. I’m here to help you with tasks such as summarizing documents, generating content, and answering questions based on the information available to me. However, I don’t have the capability to directly edit or change documents. If you need assistance with formatting or editing your document, I can guide you through the steps or provide tips on how to achieve your desired outcome. Feel free to ask for any help you need with your document!”
What on earth?? Is this for real, it’s the whole reason that I forked out for this overpriced chatbot.
Please tell me i’ve done something wrong with the configuration?
I just purchased the first license for my organisation and am trialing it after reviewing the Microsoft promo material. The promo material had it writing copy, formating and inserting images and all sorts of stuff.I purchased a license mainly because we burn a lot of time in my company doing something I would thought would be simple for Copilot, fixing document styles and formatting. We write a lot of documents for clients using their templates and this often means we’re merging content from our own internal records into client templates. So I was planning on using Copilot to fix styles after inserting content instead of a person spending hours making sure everything in perfect.The very first document I try this on, I get the following message when I asked it to “Apply consistent styles and formatting to the entire document” (and this came up as pre-filled selection option after copying and pasting suggesting it’s capable of this): “As Microsoft 365 Copilot, my role is to assist you within the chat interface by providing information, guidance, and support. I’m here to help you with tasks such as summarizing documents, generating content, and answering questions based on the information available to me. However, I don’t have the capability to directly edit or change documents. If you need assistance with formatting or editing your document, I can guide you through the steps or provide tips on how to achieve your desired outcome. Feel free to ask for any help you need with your document!” What on earth?? Is this for real, it’s the whole reason that I forked out for this overpriced chatbot. Please tell me i’ve done something wrong with the configuration? Read More
how to generate a dome shape by using defined points
Hi all,
i am trying to generate a semi ellipsoidal dome shape by using x, y, z values and below is my code. in the code i defined the x,y,z values but i am unable to assign those values to sphere.
any suggestions and thanks in advance
clc
x = [65 55.2125 50.8267 46.7398 42.9232 39.3476 35.9815 32.7882 29.7175 26.6833 23.4690 18.7605];
y = x;
z = [0.0,0.9,2.7,5.2,8.2,11.8,15.8,20.3,25.2,30.7,37.1,47.5]; % max height of dome is 47.5
[x,y,z] = sphere(20);
x = x(12:end,:);
y = y(12:end,:);
z = z(12:end,:);
r = 65; % radius of the dome
surf(r.*x,r.*y,r.*z);
axis equal;Hi all,
i am trying to generate a semi ellipsoidal dome shape by using x, y, z values and below is my code. in the code i defined the x,y,z values but i am unable to assign those values to sphere.
any suggestions and thanks in advance
clc
x = [65 55.2125 50.8267 46.7398 42.9232 39.3476 35.9815 32.7882 29.7175 26.6833 23.4690 18.7605];
y = x;
z = [0.0,0.9,2.7,5.2,8.2,11.8,15.8,20.3,25.2,30.7,37.1,47.5]; % max height of dome is 47.5
[x,y,z] = sphere(20);
x = x(12:end,:);
y = y(12:end,:);
z = z(12:end,:);
r = 65; % radius of the dome
surf(r.*x,r.*y,r.*z);
axis equal; Hi all,
i am trying to generate a semi ellipsoidal dome shape by using x, y, z values and below is my code. in the code i defined the x,y,z values but i am unable to assign those values to sphere.
any suggestions and thanks in advance
clc
x = [65 55.2125 50.8267 46.7398 42.9232 39.3476 35.9815 32.7882 29.7175 26.6833 23.4690 18.7605];
y = x;
z = [0.0,0.9,2.7,5.2,8.2,11.8,15.8,20.3,25.2,30.7,37.1,47.5]; % max height of dome is 47.5
[x,y,z] = sphere(20);
x = x(12:end,:);
y = y(12:end,:);
z = z(12:end,:);
r = 65; % radius of the dome
surf(r.*x,r.*y,r.*z);
axis equal; dome MATLAB Answers — New Questions
Parrot minidrone – wifi vs bluetooth connection
Hello,
I’d like to connect my Parrot Mambo and Rolling Spider minidrone to my laptop to go through the Programming Drones with Simulink steps as described here – https://www.mathworks.com/videos/programming-drones-with-simulink-1513024653640.html . Connection using the bluetooth is descibed on the mentioned link.
But I found also these guidelines – Connect to Parrot Mambo Drone Over Wi-Fi descibing connection via the wifi.
So may I ask you which way is currently prefered? I tried it briefly and it seems that only bluetooth works for me.
Thank youHello,
I’d like to connect my Parrot Mambo and Rolling Spider minidrone to my laptop to go through the Programming Drones with Simulink steps as described here – https://www.mathworks.com/videos/programming-drones-with-simulink-1513024653640.html . Connection using the bluetooth is descibed on the mentioned link.
But I found also these guidelines – Connect to Parrot Mambo Drone Over Wi-Fi descibing connection via the wifi.
So may I ask you which way is currently prefered? I tried it briefly and it seems that only bluetooth works for me.
Thank you Hello,
I’d like to connect my Parrot Mambo and Rolling Spider minidrone to my laptop to go through the Programming Drones with Simulink steps as described here – https://www.mathworks.com/videos/programming-drones-with-simulink-1513024653640.html . Connection using the bluetooth is descibed on the mentioned link.
But I found also these guidelines – Connect to Parrot Mambo Drone Over Wi-Fi descibing connection via the wifi.
So may I ask you which way is currently prefered? I tried it briefly and it seems that only bluetooth works for me.
Thank you parrot minidrone, parrot mambo, parrot rolling spider, bluetooth, wifi MATLAB Answers — New Questions
Excel Formula References Changing When I Insert a Row
Hello,
I have multiple excel workbooks, where if I insert a row, it stuffs up my formula references (i.e. formulas start referencing the wrong cells) even though I haven’t changed the formula. The rows are not even referenced by the formula indirectly (i.e. it is not part of an array in a SUMPRODUCT).
This never used to happen, and has only started occurring in the past week or so.
Any help would be much appreciated.
Hello, I have multiple excel workbooks, where if I insert a row, it stuffs up my formula references (i.e. formulas start referencing the wrong cells) even though I haven’t changed the formula. The rows are not even referenced by the formula indirectly (i.e. it is not part of an array in a SUMPRODUCT). This never used to happen, and has only started occurring in the past week or so. Any help would be much appreciated. Read More