Optimization of EPANET network using GA toolkit
A pipe network distribution layout for irrigation purpose is prepared in EPANET. This network have 80 pipes and 80 nodes plus one reservoir Optimisation of pipe network for minimum cost is required to be done using GA tool box of MATLAB.
The pipe network (EPANET file i.e .inp file) needs to be coupled with MATLAB. And then the same network needs to be optimised. That means diameters of all 80 pipes need to be determined using GA tool box of MATLAB, such that it that will suffice the limiting conditions of design viz: minimum pressure head at outlet nodes must be at least 1 m and velocity in all pipes must be in between 0.6 and 1.8 m/s.
the set of commercially available diameters and there cost is available, need to use those diameters only.A pipe network distribution layout for irrigation purpose is prepared in EPANET. This network have 80 pipes and 80 nodes plus one reservoir Optimisation of pipe network for minimum cost is required to be done using GA tool box of MATLAB.
The pipe network (EPANET file i.e .inp file) needs to be coupled with MATLAB. And then the same network needs to be optimised. That means diameters of all 80 pipes need to be determined using GA tool box of MATLAB, such that it that will suffice the limiting conditions of design viz: minimum pressure head at outlet nodes must be at least 1 m and velocity in all pipes must be in between 0.6 and 1.8 m/s.
the set of commercially available diameters and there cost is available, need to use those diameters only. A pipe network distribution layout for irrigation purpose is prepared in EPANET. This network have 80 pipes and 80 nodes plus one reservoir Optimisation of pipe network for minimum cost is required to be done using GA tool box of MATLAB.
The pipe network (EPANET file i.e .inp file) needs to be coupled with MATLAB. And then the same network needs to be optimised. That means diameters of all 80 pipes need to be determined using GA tool box of MATLAB, such that it that will suffice the limiting conditions of design viz: minimum pressure head at outlet nodes must be at least 1 m and velocity in all pipes must be in between 0.6 and 1.8 m/s.
the set of commercially available diameters and there cost is available, need to use those diameters only. epanet-matlab toolkit, optimization using ga toolkit MATLAB Answers — New Questions