Month: June 2024
Azure DevOps Team capacity multicultural teams
In our development teams, there are many different people in different countries. Is there a way to assign the days off by user? Because each country has its holidays, for example.
In our development teams, there are many different people in different countries. Is there a way to assign the days off by user? Because each country has its holidays, for example. Read More
MAM (preview) for Windows 365 and Azure Virtual Desktop
Now in preview, Microsoft Intune Mobile Application Management (MAM) can provide numerous benefits for iOS/iPad OS and Android clients. Have you ever wondered if you could allow users to access Azure Virtual Desktop or Windows 365 on their personal iOS/iPadOS and Android devices? Do you want to do this with more restrictive redirection policies than on managed devices and only allow a connection if some security criteria are met? Well, now you can—and you don’t even have to manage the device.
Configure and apply redirection settings with Intune MAM
End users can now configure different redirections when they connect to Azure Virtual Desktop and Windows 365 using the latest versions of the Remote Desktop client (iOS/iPadOS and Android) and the Windows App (iOS/iPadOS) that are integrated with Intune Mobile Application Management.
Previously, supporting bring your own device (BYOD) was a challenge because Azure Virtual Desktop and Windows 365 end users had the same redirections whether they connected from a corporate or personal device. For example, it wasn’t possible to allow drive and clipboard redirection on a corporate managed device without allowing the same redirections on a personal device. This posed data loss risk when corporate data was copied to the personal device.
With Intune MAM integration, customers can now apply different redirection settings based on user security group, operating system of the device, or whether the device is Intune managed or not. All this can be done without additional Azure Virtual Desktop host pools.
Without managing the personal device, Intune MAM allows you to:
Disable specific redirections on personal devices.
Require PIN access to app before connection.
Block third-party keyboards.
Specify a minimum device operating system version before connection.
Specify a minimum Windows App and/or Remote Desktop app version number before connection.
Block jailbroken/rooted devices from connection.
Require a mobile threat defense solution on devices, with no threats detected before connection.
Intune MAM allows you to manage and protect your organization’s data within an application without enrolling in device management, while ensuring an employee’s personal data on the device is not accessed. Many productivity apps, such as the Microsoft 365 apps, can already be managed by Intune MAM. See the official list of Microsoft Intune protected apps available for public use and the Planning guide: Personal devices vs. Organization-owned devices for more information.
Manage apps using MAM whether devices are enrolled or unenrolled in Intune mobile device management
Intune MAM supports two configurations:
Intune mobile device management (MDM) + MAM: IT administrators can manage apps using MAM on devices that are enrolled with Intune MDM.
Unenrolled devices with MAM managed applications: IT administrators can manage apps using MAM on unenrolled devices, which typically are employees’ preferred personal devices.
For managed devices, it’s optional to use MDM + MAM. Many Azure Virtual Desktop or Windows 365 customers will only need to apply MAM on unenrolled devices because redirection policies usually have stricter settings on unenrolled devices to protect against data loss. Redirections can work as-is on managed devices without MAM.
Important: Configuring redirection settings on a client device isn’t a substitute for correctly configuring your host pools and session hosts based on your requirements. Using Intune to configure Windows App and the Remote Desktop app might not be suitable for workloads requiring a higher level of security.
Workloads with higher security requirements should continue to set redirections at the host pool or session host, where all users of the host pool have the same redirection configuration. A data loss protection (DLP) solution is recommended, and redirection should be disabled on session hosts whenever possible to minimize the opportunities for data loss.
There are four primary configurations to manage redirections using MAM:
Intune device filters allow app configuration and app protection policies to be targeted for specific devices, regardless of whether they are enrolled or unenrolled devices.
Intune app configuration policies manage redirection settings for Windows App and the Remote Desktop app on a client device.
Intune app protection policies specify security requirements that must be met by the application and the client device. Use filters to target users based on specific criteria.
Conditional Access policies control access to Azure Virtual Desktop and Windows 365 and ensure criteria set in app configuration policies and app protection policies are met.
The screenshots below illustrate the key steps to configure different redirections on personal devices. For this example, we will disable drive redirection on a personal iPad so corporate data cannot be copied to the local iPad storage.
Create a filter for unmanaged devices.
Create an app configuration policy to disable drive redirection using the Remote Desktop Protocol (RDP) property name of drivestoredirect as listed in Configure device redirection. Assign a value of 0.
Select the groups the Intune app configuration policy applies to (hence the groups the redirection settings apply to). Select Edit Filter and choose the unmanaged devices filter that was created earlier.
Sign in to your Azure Virtual Desktop session host or Windows 365 Cloud PC.
On a managed iPad, drive redirection is allowed, as shown here:
On an unmanaged iPad, drive redirection is disallowed, as shown here:
In addition to different redirections, you may also want to require a minimum OS and Remote Desktop app version to reduce the risk of threats caused by older and potentially unsupported devices that are not current with the latest security updates. Configure an Intune app protection policy (see App protection policies overview) to do this. In the example below, you can require that the Android device be:
Android 14.0 or later.
Remote Desktop 10.0.19 or later.
Determined as Secured – no threats – by Microsoft Defender for Endpoint.
With the Intune app protection policy applied to Remote Desktop and Windows App, the following three scenarios are now possible even on personal devices that you don’t manage:
Block by OS version
Access is blocked as the operating system version of the device does not meet the requirements of Android version 14.0 or higher set by the IT admin.
Block by app version
Access is blocked as the version of the Remote Desktop client does not meet the requirement of 10.0.18.1258 or higher as set by the IT admin.
Only allow approved clients
Access is blocked as a version of the client supporting app protection policy is required in Microsoft Entra Conditional Access policies.
In the future, we will be extending these redirection and device posture checking capabilities on personal devices to Windows.
To learn more detail about these capabilities, see Configure client device redirection settings for Windows App and the Remote Desktop app using Microsoft Intune.
Continue the conversation. Find best practices. Bookmark the Windows Tech Community, then follow us @MSWindowsITPro on X and on LinkedIn. Looking for support? Visit Windows on Microsoft Q&A.
Microsoft Tech Community – Latest Blogs –Read More
Can Matlab cellular functions -like cellfun- work with non linearly spaced indices ?
Hi,
I would like to affect a value to some non linearly indexed elements of a vector with using a cell array.
At the moment I index a for loop with a non linearly spaced row index. Let’s say :
N = 8;
id = find(randi(2,1,N)-1); % non zeros positions in a random vector of binaries
u = true(1,N);
for k = id
u(1,k:k:end) = false;
end
How would I do the same affectations with cellfun for instance ?
Thank you for help.
Cheers.
NicolasHi,
I would like to affect a value to some non linearly indexed elements of a vector with using a cell array.
At the moment I index a for loop with a non linearly spaced row index. Let’s say :
N = 8;
id = find(randi(2,1,N)-1); % non zeros positions in a random vector of binaries
u = true(1,N);
for k = id
u(1,k:k:end) = false;
end
How would I do the same affectations with cellfun for instance ?
Thank you for help.
Cheers.
Nicolas Hi,
I would like to affect a value to some non linearly indexed elements of a vector with using a cell array.
At the moment I index a for loop with a non linearly spaced row index. Let’s say :
N = 8;
id = find(randi(2,1,N)-1); % non zeros positions in a random vector of binaries
u = true(1,N);
for k = id
u(1,k:k:end) = false;
end
How would I do the same affectations with cellfun for instance ?
Thank you for help.
Cheers.
Nicolas indexing, index, cellular, element wise, non linear MATLAB Answers — New Questions
How to plot a triangle with functions in matlab
Does this code work
xIN = 10;
yIN = 5;
xValuesArray = [];
yValuesArray = [];
for i=1:3
[xValuesArray(i) , yValuesArray(i)] = get2();
end
v(:,1)= xValuesArray’
v(:,2)= yValuesArray’
polyin = polyshape(v)
p = perimeter(polyin)
a = polyarea(xValuesArray, yValuesArray)
figure
hold on
plot([xValuesArray(1) xValuesArray(2)],[yValuesArray(1) yValuesArray(2)], …
[xValuesArray(2) xValuesArray(3)],[yValuesArray(2) yValuesArray(3)], …
[xValuesArray(3) xValuesArray(1)],[yValuesArray(3) yValuesArray(1)])
function [getX, getY] = get2()
getX = input("Give me a value for xn");
getY = input("Give me a value for yn");
endDoes this code work
xIN = 10;
yIN = 5;
xValuesArray = [];
yValuesArray = [];
for i=1:3
[xValuesArray(i) , yValuesArray(i)] = get2();
end
v(:,1)= xValuesArray’
v(:,2)= yValuesArray’
polyin = polyshape(v)
p = perimeter(polyin)
a = polyarea(xValuesArray, yValuesArray)
figure
hold on
plot([xValuesArray(1) xValuesArray(2)],[yValuesArray(1) yValuesArray(2)], …
[xValuesArray(2) xValuesArray(3)],[yValuesArray(2) yValuesArray(3)], …
[xValuesArray(3) xValuesArray(1)],[yValuesArray(3) yValuesArray(1)])
function [getX, getY] = get2()
getX = input("Give me a value for xn");
getY = input("Give me a value for yn");
end Does this code work
xIN = 10;
yIN = 5;
xValuesArray = [];
yValuesArray = [];
for i=1:3
[xValuesArray(i) , yValuesArray(i)] = get2();
end
v(:,1)= xValuesArray’
v(:,2)= yValuesArray’
polyin = polyshape(v)
p = perimeter(polyin)
a = polyarea(xValuesArray, yValuesArray)
figure
hold on
plot([xValuesArray(1) xValuesArray(2)],[yValuesArray(1) yValuesArray(2)], …
[xValuesArray(2) xValuesArray(3)],[yValuesArray(2) yValuesArray(3)], …
[xValuesArray(3) xValuesArray(1)],[yValuesArray(3) yValuesArray(1)])
function [getX, getY] = get2()
getX = input("Give me a value for xn");
getY = input("Give me a value for yn");
end functions, triangle, plotting MATLAB Answers — New Questions
ROS toolbox (ROS2 bag)
I would like to read bag files from ROS2 (.db3) format. Is it possible to do it with the current ROS toolbox as the information is serialized into cdr format?I would like to read bag files from ROS2 (.db3) format. Is it possible to do it with the current ROS toolbox as the information is serialized into cdr format? I would like to read bag files from ROS2 (.db3) format. Is it possible to do it with the current ROS toolbox as the information is serialized into cdr format? ros2, bag, rosbag2, ros2bag MATLAB Answers — New Questions
Curve fitter app does not work
I used online MATLAB; however, I could not fit the curve using Curve fitter app.
There are errors presented at the command window as;
Error in matlab.ui.internal.toolstrip.base.ActionInterface>@(event,data)PropertySetCallback(this,event,data) (line 40)
this.PropertySetListener = addlistener(this.Peer, ‘propertySet’, @(event, data) PropertySetCallback(this, event, data));
Error in viewmodel.internal.factory.ManagerFactoryProducer>@(src,event)callback(src,viewmodel.internal.factory.ManagerFactoryProducer.convertStructToEventData(event)) (line 79)
proxyCallback = @(src, event)callback(src, … > In cfapp.internal.curvefitter.ui.toolstrip/FitSectionView/set.AutoFitState (line 60)
In cfapp.internal.curvefitter.ui.toolstrip/FitSectionView/autoFitRadioButtonClicked (line 138)
In cfapp.internal.curvefitter.ui.toolstrip.FitSectionView>@(varargin)this.autoFitRadioButtonClicked(varargin{:}) (line 116)
In internal.Callback.execute (line 128)
In matlab.ui.internal.toolstrip.base/Action/PropertySetCallback (line 782)
In matlab.ui.internal.toolstrip.base.ActionInterface>@(event,data)PropertySetCallback(this,event,data) (line 40)
In viewmodel.internal.factory.ManagerFactoryProducer>@(src,event)callback(src,viewmodel.internal.factory.ManagerFactoryProducer.convertStructToEventData(event)) (line 79)I used online MATLAB; however, I could not fit the curve using Curve fitter app.
There are errors presented at the command window as;
Error in matlab.ui.internal.toolstrip.base.ActionInterface>@(event,data)PropertySetCallback(this,event,data) (line 40)
this.PropertySetListener = addlistener(this.Peer, ‘propertySet’, @(event, data) PropertySetCallback(this, event, data));
Error in viewmodel.internal.factory.ManagerFactoryProducer>@(src,event)callback(src,viewmodel.internal.factory.ManagerFactoryProducer.convertStructToEventData(event)) (line 79)
proxyCallback = @(src, event)callback(src, … > In cfapp.internal.curvefitter.ui.toolstrip/FitSectionView/set.AutoFitState (line 60)
In cfapp.internal.curvefitter.ui.toolstrip/FitSectionView/autoFitRadioButtonClicked (line 138)
In cfapp.internal.curvefitter.ui.toolstrip.FitSectionView>@(varargin)this.autoFitRadioButtonClicked(varargin{:}) (line 116)
In internal.Callback.execute (line 128)
In matlab.ui.internal.toolstrip.base/Action/PropertySetCallback (line 782)
In matlab.ui.internal.toolstrip.base.ActionInterface>@(event,data)PropertySetCallback(this,event,data) (line 40)
In viewmodel.internal.factory.ManagerFactoryProducer>@(src,event)callback(src,viewmodel.internal.factory.ManagerFactoryProducer.convertStructToEventData(event)) (line 79) I used online MATLAB; however, I could not fit the curve using Curve fitter app.
There are errors presented at the command window as;
Error in matlab.ui.internal.toolstrip.base.ActionInterface>@(event,data)PropertySetCallback(this,event,data) (line 40)
this.PropertySetListener = addlistener(this.Peer, ‘propertySet’, @(event, data) PropertySetCallback(this, event, data));
Error in viewmodel.internal.factory.ManagerFactoryProducer>@(src,event)callback(src,viewmodel.internal.factory.ManagerFactoryProducer.convertStructToEventData(event)) (line 79)
proxyCallback = @(src, event)callback(src, … > In cfapp.internal.curvefitter.ui.toolstrip/FitSectionView/set.AutoFitState (line 60)
In cfapp.internal.curvefitter.ui.toolstrip/FitSectionView/autoFitRadioButtonClicked (line 138)
In cfapp.internal.curvefitter.ui.toolstrip.FitSectionView>@(varargin)this.autoFitRadioButtonClicked(varargin{:}) (line 116)
In internal.Callback.execute (line 128)
In matlab.ui.internal.toolstrip.base/Action/PropertySetCallback (line 782)
In matlab.ui.internal.toolstrip.base.ActionInterface>@(event,data)PropertySetCallback(this,event,data) (line 40)
In viewmodel.internal.factory.ManagerFactoryProducer>@(src,event)callback(src,viewmodel.internal.factory.ManagerFactoryProducer.convertStructToEventData(event)) (line 79) error, curve fitting MATLAB Answers — New Questions
Pulling data from a onenote page with subpages
In OneNote, I was trying to summarize data from a page of notes that has lots of subpages. I cannot seem to get this to work. Is this not an available feature?
In OneNote, I was trying to summarize data from a page of notes that has lots of subpages. I cannot seem to get this to work. Is this not an available feature? Read More
Microsoft Fabric Blueprinting Opportunities
Microsoft is updating a certification for Implementing analytics solutions using Microsoft Fabric and is considering a new certification for Implementing data engineering solutions using Microsoft Fabric. We need your input through our exam blueprinting surveys.
The blueprint determines how many questions each skill in the exam will be assigned. Please complete the online surveys by July 2nd, 2024. Please also feel free to forward the surveys to any colleagues you consider subject matter experts for these certifications. If you have any questions, feel free to contact Rohan Mahadevan rmahadevan@microsoft.com or John Sowles at josowles@microsoft.com.
Implementing analytics solutions using Microsoft Fabric blueprint survey link:
https://microsoftlearning.co1.qualtrics.com/jfe/form/SV_dcDq92d4Qs7oCzA
Implementing data engineering solutions using Microsoft Fabric blueprint survey link:
https://microsoftlearning.co1.qualtrics.com/jfe/form/SV_6xsA4bE3EYT9Bb0
Microsoft is updating a certification for Implementing analytics solutions using Microsoft Fabric and is considering a new certification for Implementing data engineering solutions using Microsoft Fabric. We need your input through our exam blueprinting surveys.
The blueprint determines how many questions each skill in the exam will be assigned. Please complete the online surveys by July 2nd, 2024. Please also feel free to forward the surveys to any colleagues you consider subject matter experts for these certifications. If you have any questions, feel free to contact Rohan Mahadevan rmahadevan@microsoft.com or John Sowles at josowles@microsoft.com.
Implementing analytics solutions using Microsoft Fabric blueprint survey link:
https://microsoftlearning.co1.qualtrics.com/jfe/form/SV_dcDq92d4Qs7oCzA
Implementing data engineering solutions using Microsoft Fabric blueprint survey link:
https://microsoftlearning.co1.qualtrics.com/jfe/form/SV_6xsA4bE3EYT9Bb0 Read More
someone booked over 2 meetings with a 5 hour meeting time.
This is my personal booking page. I sent the link that lands on my 3 available options. 60, 30 and 15 mins meetings.
Somehow they booked a 5 hour meeting that overlapped my 8 am and my 12 pm meetings. I double checked they both are set to busy.
I can’t figure out how they did that. When I go to the same link in an incognito page as guest, I only see the 3 meeting types and the busy times are not available in the list.
This is my personal booking page. I sent the link that lands on my 3 available options. 60, 30 and 15 mins meetings. Somehow they booked a 5 hour meeting that overlapped my 8 am and my 12 pm meetings. I double checked they both are set to busy. I can’t figure out how they did that. When I go to the same link in an incognito page as guest, I only see the 3 meeting types and the busy times are not available in the list. Read More
I want show ylabel like 36m, 38m, 40m on plot I have variable population, plz help
% Define parameters
PopSaudi22
P_0 = PopSaudi22.POPTOTL % Initial population (1 million)
r = 0.02; % Annual growth rate (2%)
t = 1:1:20; % Time in years from 0 to 50 with a step of 0.1
% Compute population over time
P = P_0 * exp(r * t)
% Plot the result
figure;
plot(t, P,’-o’, ‘LineWidth’, 2);
xlabel(‘Time (years)’);
ylabel(‘Population in million’);
title(‘Exponential Population Growth’);
grid on;
I use an equation this: P = P_0 * exp(r * t)% Define parameters
PopSaudi22
P_0 = PopSaudi22.POPTOTL % Initial population (1 million)
r = 0.02; % Annual growth rate (2%)
t = 1:1:20; % Time in years from 0 to 50 with a step of 0.1
% Compute population over time
P = P_0 * exp(r * t)
% Plot the result
figure;
plot(t, P,’-o’, ‘LineWidth’, 2);
xlabel(‘Time (years)’);
ylabel(‘Population in million’);
title(‘Exponential Population Growth’);
grid on;
I use an equation this: P = P_0 * exp(r * t) % Define parameters
PopSaudi22
P_0 = PopSaudi22.POPTOTL % Initial population (1 million)
r = 0.02; % Annual growth rate (2%)
t = 1:1:20; % Time in years from 0 to 50 with a step of 0.1
% Compute population over time
P = P_0 * exp(r * t)
% Plot the result
figure;
plot(t, P,’-o’, ‘LineWidth’, 2);
xlabel(‘Time (years)’);
ylabel(‘Population in million’);
title(‘Exponential Population Growth’);
grid on;
I use an equation this: P = P_0 * exp(r * t) matlab MATLAB Answers — New Questions
Someone that works with symbolic variables?
Hi guys, I have a code that should give me some results. Unfortunately when I insert k>3, the program collapses and says there isn’t enought RAM to run it. I’m just texting to know if anyone has ever worked with symbolic variables before and can help me. If anyone knows how to work with this please I’ll be really glad to talk to you via email or Telegram.
function [S,Gnew,Enew] = BGroebner1(k)
M = 3*k + 1;
x = sym(‘x’);
r = sym(‘r’);
c = sym(‘c’, [1 M+1]);
% Define the sum of monomials with negative coefficients
CC = x;
for i = 1:M+1
CC = CC + c(1,i)*x^(-i);
end
sM = expand(CC^(3));
for i = M:1:3*M+3
sM = subs(sM, x^(-i), r);
end
sMnew = sM;
sMnew = subs(sMnew,r,0);
sMnew1 = expand(x^(M-1)*sMnew);
C =coeffs(sMnew1,x);
E =sym(‘E’,[1,M-1]);
for i= M-1:-1:1
E(1,M-i) = C(1,i);
end
% Calculate Groebner basis,
num_syms = M+1;
syms_cell = cell(1, num_syms);
for i = M+1:-1:1
syms_cell{i} = sym([‘c’, num2str(M+2-i)]);
end
c = [syms_cell{:}];
G = gbasis(E,c,"MonomialOrder",’Lexicographic’);
J = (M+1)*M;
sM1 = expand(CC^{M});
sMnew2 = expand(x^(J)*sM1);
E2 = coeffs(sMnew2,x);
EM = E2(J);
EM1=E2(J-1);
F= sym(‘F’);
Enew = [E,EM,EM1+F];
% Groebner basis with (E^M)_1, (E^M)_2 + F
Gnew = gbasis(Enew,[F c],"MonomialOrder",’Lexicographic’);
%% Calculate the solutions of the E_{1}, E_{2},…
eqn =sym(‘eqn’, [1 M-1]);
for i=1:1:M-1
eqn(i)= Enew(i)==0;
end
d = sym(‘c’, [1 M+1]);
S = vpasolve(eqn,d);
end
Looking forward your replies.Hi guys, I have a code that should give me some results. Unfortunately when I insert k>3, the program collapses and says there isn’t enought RAM to run it. I’m just texting to know if anyone has ever worked with symbolic variables before and can help me. If anyone knows how to work with this please I’ll be really glad to talk to you via email or Telegram.
function [S,Gnew,Enew] = BGroebner1(k)
M = 3*k + 1;
x = sym(‘x’);
r = sym(‘r’);
c = sym(‘c’, [1 M+1]);
% Define the sum of monomials with negative coefficients
CC = x;
for i = 1:M+1
CC = CC + c(1,i)*x^(-i);
end
sM = expand(CC^(3));
for i = M:1:3*M+3
sM = subs(sM, x^(-i), r);
end
sMnew = sM;
sMnew = subs(sMnew,r,0);
sMnew1 = expand(x^(M-1)*sMnew);
C =coeffs(sMnew1,x);
E =sym(‘E’,[1,M-1]);
for i= M-1:-1:1
E(1,M-i) = C(1,i);
end
% Calculate Groebner basis,
num_syms = M+1;
syms_cell = cell(1, num_syms);
for i = M+1:-1:1
syms_cell{i} = sym([‘c’, num2str(M+2-i)]);
end
c = [syms_cell{:}];
G = gbasis(E,c,"MonomialOrder",’Lexicographic’);
J = (M+1)*M;
sM1 = expand(CC^{M});
sMnew2 = expand(x^(J)*sM1);
E2 = coeffs(sMnew2,x);
EM = E2(J);
EM1=E2(J-1);
F= sym(‘F’);
Enew = [E,EM,EM1+F];
% Groebner basis with (E^M)_1, (E^M)_2 + F
Gnew = gbasis(Enew,[F c],"MonomialOrder",’Lexicographic’);
%% Calculate the solutions of the E_{1}, E_{2},…
eqn =sym(‘eqn’, [1 M-1]);
for i=1:1:M-1
eqn(i)= Enew(i)==0;
end
d = sym(‘c’, [1 M+1]);
S = vpasolve(eqn,d);
end
Looking forward your replies. Hi guys, I have a code that should give me some results. Unfortunately when I insert k>3, the program collapses and says there isn’t enought RAM to run it. I’m just texting to know if anyone has ever worked with symbolic variables before and can help me. If anyone knows how to work with this please I’ll be really glad to talk to you via email or Telegram.
function [S,Gnew,Enew] = BGroebner1(k)
M = 3*k + 1;
x = sym(‘x’);
r = sym(‘r’);
c = sym(‘c’, [1 M+1]);
% Define the sum of monomials with negative coefficients
CC = x;
for i = 1:M+1
CC = CC + c(1,i)*x^(-i);
end
sM = expand(CC^(3));
for i = M:1:3*M+3
sM = subs(sM, x^(-i), r);
end
sMnew = sM;
sMnew = subs(sMnew,r,0);
sMnew1 = expand(x^(M-1)*sMnew);
C =coeffs(sMnew1,x);
E =sym(‘E’,[1,M-1]);
for i= M-1:-1:1
E(1,M-i) = C(1,i);
end
% Calculate Groebner basis,
num_syms = M+1;
syms_cell = cell(1, num_syms);
for i = M+1:-1:1
syms_cell{i} = sym([‘c’, num2str(M+2-i)]);
end
c = [syms_cell{:}];
G = gbasis(E,c,"MonomialOrder",’Lexicographic’);
J = (M+1)*M;
sM1 = expand(CC^{M});
sMnew2 = expand(x^(J)*sM1);
E2 = coeffs(sMnew2,x);
EM = E2(J);
EM1=E2(J-1);
F= sym(‘F’);
Enew = [E,EM,EM1+F];
% Groebner basis with (E^M)_1, (E^M)_2 + F
Gnew = gbasis(Enew,[F c],"MonomialOrder",’Lexicographic’);
%% Calculate the solutions of the E_{1}, E_{2},…
eqn =sym(‘eqn’, [1 M-1]);
for i=1:1:M-1
eqn(i)= Enew(i)==0;
end
d = sym(‘c’, [1 M+1]);
S = vpasolve(eqn,d);
end
Looking forward your replies. symbolic, variables MATLAB Answers — New Questions
using polyval with one of the polynomials of a spline obtained with the unmkpp command, the results do not overlap! Why?
I first interpolated some data using the spline command. Then I calculated the coefficients of the different cubic polynomials that make up the spline. Then I used the polyval command to check the first polynomial but the spline and polyval curves do not overlap.
What am I doing wrong?.
There is definitely something related to the various polynomials that I have not understood correctly. I thank anyone who helps me understand better. See the file script please:
%butta_sto_test
%
clear all
clc
% Data
% Time
Time=[7, 9, 11, 12]
% Temperture
Temperature=[49, 57, 71, 75]
% Data Time query
Timeq=[7:0.1:12];
% Results
% piecewise polynomial structure
pp=spline(Time, Temperature);
% Timeq data interpolation
Temperatureq=spline(Time, Temperature, Timeq);
% Calculating the coefficients of the 3 polynomials that make up the spline
[breaks, coeffs, m, n] = unmkpp(spline(Time,Temperature));
% First polinomial p1
p1=coeffs(1,:)
% First time interval corresponding to the first polynomial of the spline
Timeq1=[7:0.1:9];
% using polyval to calculate the values corresponding to Timeq1 using the polynomial p1
Temperatureq1=polyval(p1,Timeq1);
% Spline plot
figure(1)
plot(Timeq, Temperatureq, Time, Temperature, ‘o’, Time, Temperature, ‘–‘)
hold on
plot(Timeq1, Temperatureq1,’*’)
grid onI first interpolated some data using the spline command. Then I calculated the coefficients of the different cubic polynomials that make up the spline. Then I used the polyval command to check the first polynomial but the spline and polyval curves do not overlap.
What am I doing wrong?.
There is definitely something related to the various polynomials that I have not understood correctly. I thank anyone who helps me understand better. See the file script please:
%butta_sto_test
%
clear all
clc
% Data
% Time
Time=[7, 9, 11, 12]
% Temperture
Temperature=[49, 57, 71, 75]
% Data Time query
Timeq=[7:0.1:12];
% Results
% piecewise polynomial structure
pp=spline(Time, Temperature);
% Timeq data interpolation
Temperatureq=spline(Time, Temperature, Timeq);
% Calculating the coefficients of the 3 polynomials that make up the spline
[breaks, coeffs, m, n] = unmkpp(spline(Time,Temperature));
% First polinomial p1
p1=coeffs(1,:)
% First time interval corresponding to the first polynomial of the spline
Timeq1=[7:0.1:9];
% using polyval to calculate the values corresponding to Timeq1 using the polynomial p1
Temperatureq1=polyval(p1,Timeq1);
% Spline plot
figure(1)
plot(Timeq, Temperatureq, Time, Temperature, ‘o’, Time, Temperature, ‘–‘)
hold on
plot(Timeq1, Temperatureq1,’*’)
grid on I first interpolated some data using the spline command. Then I calculated the coefficients of the different cubic polynomials that make up the spline. Then I used the polyval command to check the first polynomial but the spline and polyval curves do not overlap.
What am I doing wrong?.
There is definitely something related to the various polynomials that I have not understood correctly. I thank anyone who helps me understand better. See the file script please:
%butta_sto_test
%
clear all
clc
% Data
% Time
Time=[7, 9, 11, 12]
% Temperture
Temperature=[49, 57, 71, 75]
% Data Time query
Timeq=[7:0.1:12];
% Results
% piecewise polynomial structure
pp=spline(Time, Temperature);
% Timeq data interpolation
Temperatureq=spline(Time, Temperature, Timeq);
% Calculating the coefficients of the 3 polynomials that make up the spline
[breaks, coeffs, m, n] = unmkpp(spline(Time,Temperature));
% First polinomial p1
p1=coeffs(1,:)
% First time interval corresponding to the first polynomial of the spline
Timeq1=[7:0.1:9];
% using polyval to calculate the values corresponding to Timeq1 using the polynomial p1
Temperatureq1=polyval(p1,Timeq1);
% Spline plot
figure(1)
plot(Timeq, Temperatureq, Time, Temperature, ‘o’, Time, Temperature, ‘–‘)
hold on
plot(Timeq1, Temperatureq1,’*’)
grid on spline unmkpp polyval interpolation MATLAB Answers — New Questions
Can’t Properly Type in the Search Bar of Browser
Hi,
My win 11 laptop has this weird problem. It does not allow me to properly type anything in the browser search bar. This happens with all browsers.
So the issue is like this:
If I type “what” it suddenly enters “whatsapp.com” in the search bar. If I type “face” it enters “facebook.com”. This is so frustrating and weird that this happens also with 2 or 3 letters too. It’s so hard for me to type anything, and now to type I have to first enter everything in either Notepad, Word or Txt and then copy paste it to the search bar.
I’m guessing this is some keyboard issue. Can someone help me understand this problem and what need to be done.
Hi, My win 11 laptop has this weird problem. It does not allow me to properly type anything in the browser search bar. This happens with all browsers. So the issue is like this:If I type “what” it suddenly enters “whatsapp.com” in the search bar. If I type “face” it enters “facebook.com”. This is so frustrating and weird that this happens also with 2 or 3 letters too. It’s so hard for me to type anything, and now to type I have to first enter everything in either Notepad, Word or Txt and then copy paste it to the search bar. I’m guessing this is some keyboard issue. Can someone help me understand this problem and what need to be done. Read More
.NET 4.8.1 signing certificates expired.
Customer is complaining that the .NET installed on their machines is not signed with a current certificate. Checked mine and the DLL signing expired in 2022. Download the installer and the installer itself expired in 2022. If there a .NET 4.8.x installer that is using current signing certificates?
Customer is complaining that the .NET installed on their machines is not signed with a current certificate. Checked mine and the DLL signing expired in 2022. Download the installer and the installer itself expired in 2022. If there a .NET 4.8.x installer that is using current signing certificates? Read More
Digital event: The Future of VMware Is in Azure – July 16th, 2024
Take a deep dive into options for migrating and optimizing your workloads in a rapidly evolving VMware landscape. Join this free digital event and learn how Azure VMware Solution can support your VMware workloads while minimizing migration disruption.
Register for this event with technical sessions for VMware administrators such as:
Security—with topics on securing the management plane, role-based access control, patch management, and integration with Microsoft Defender for Cloud and Azure VMware Solution.
Networking—with topics on hub-and-spoke vs. mesh network design, securing network traffic, traffic and networking monitoring, and hybrid deployments.
Disaster recovery and resiliency—with topics on replication and cold site setup, business continuity, and easier vSphere migration with Azure VMware Solution.
VMware integration with Azure services—with topics on data warehousing and data lakes, AI and machine learning analytics, DevOps solutions, and automation and lifecycle management.
Join us for talks from industry leaders, technical sessions, and live Q&A.
The Future of VMware Is in Azure
Tuesday, July 16, 2024
9:00 AM–10:30 AM Pacific Time (UTC-7)
Take a deep dive into options for migrating and optimizing your workloads in a rapidly evolving VMware landscape. Join this free digital event and learn how Azure VMware Solution can support your VMware workloads while minimizing migration disruption.
Register for this event with technical sessions for VMware administrators such as:
Security—with topics on securing the management plane, role-based access control, patch management, and integration with Microsoft Defender for Cloud and Azure VMware Solution.
Networking—with topics on hub-and-spoke vs. mesh network design, securing network traffic, traffic and networking monitoring, and hybrid deployments.
Disaster recovery and resiliency—with topics on replication and cold site setup, business continuity, and easier vSphere migration with Azure VMware Solution.
VMware integration with Azure services—with topics on data warehousing and data lakes, AI and machine learning analytics, DevOps solutions, and automation and lifecycle management.
Join us for talks from industry leaders, technical sessions, and live Q&A.
Register now >
The Future of VMware Is in Azure
Tuesday, July 16, 2024
9:00 AM–10:30 AM Pacific Time (UTC-7)
Read More
Remove / Manage Themes in Outlook for Mac with Intune
I got the following questions form a customer recently:
Is it possible to remove Themes in Microsoft Outlook for Mac (Outlook > Settings > General > Themes
)?
Is it possible to configure and restrict the display of Themes when managing Macs with Intune?
I got the following questions form a customer recently: Is it possible to remove Themes in Microsoft Outlook for Mac (Outlook > Settings > General > Themes)? Is it possible to configure and restrict the display of Themes when managing Macs with Intune? Read More
Add Row Shortcut When Hovering Between Two Row Numbers Is Causing Unintended Rows To Be Added
When hovering between two row numbers, the cursor changes to a pointer hand and green circles appear above and below the line. If you hover on a green circle it turns to a plus sign that when clicked adds a new row. What is this new feature and how do I turn it off? It is causing unintended rows to be added to a spreadsheet that shouldn’t be modified. This is occurring in Excel Online using Chrome.
When hovering between two row numbers, the cursor changes to a pointer hand and green circles appear above and below the line. If you hover on a green circle it turns to a plus sign that when clicked adds a new row. What is this new feature and how do I turn it off? It is causing unintended rows to be added to a spreadsheet that shouldn’t be modified. This is occurring in Excel Online using Chrome. Read More
Inconsistent NDR Messages with Transport Rule for Domain Redirection
Hi,
I am experiencing an issue with a transport rule I have set up in my Microsoft 365 tenant. The rule is intended to block emails sent to the domain abc.com and provide senders with a Non-Delivery Report (NDR) explaining that the domain has changed and to email us at xyz.com instead.
However, during testing, I’ve noticed inconsistent behavior:
Some senders receive the correct explanation as intended.Others receive the NDR message as an attachment.A few receive a different kind of NDR that mentions the transport rule rejected the message.
This inconsistency is causing confusion among our contacts, and I would appreciate your assistance in resolving this matter so that all senders receive the correct NDR message as configured.
Thank you for your attention to this matter.
Best Regards,
Janak Khadka
Hi, I am experiencing an issue with a transport rule I have set up in my Microsoft 365 tenant. The rule is intended to block emails sent to the domain abc.com and provide senders with a Non-Delivery Report (NDR) explaining that the domain has changed and to email us at xyz.com instead. However, during testing, I’ve noticed inconsistent behavior:Some senders receive the correct explanation as intended.Others receive the NDR message as an attachment.A few receive a different kind of NDR that mentions the transport rule rejected the message.This inconsistency is causing confusion among our contacts, and I would appreciate your assistance in resolving this matter so that all senders receive the correct NDR message as configured.Thank you for your attention to this matter.Best Regards,Janak Khadka Read More
Onedrive can’t move to external harddrive on mac
The first time install I already choose onedrive folder on my external ssd hardrive. But it only create a link to internal hardisk in Users/xxx/Library/CloudStorage/OneDrive-Personal. Now my internal hard drive almost full because of onedrive. How to solve this problem ? How to move to external hard drive ?
The first time install I already choose onedrive folder on my external ssd hardrive. But it only create a link to internal hardisk in Users/xxx/Library/CloudStorage/OneDrive-Personal. Now my internal hard drive almost full because of onedrive. How to solve this problem ? How to move to external hard drive ? Read More
Excel File type
Every file I create in Excel is saving with an excel file extension but the file icon is PDF so I cannot sent the file to anyone else to use.
Every file I create in Excel is saving with an excel file extension but the file icon is PDF so I cannot sent the file to anyone else to use. Read More