Month: August 2024
Troubleshooting Issues with Microsoft Print to PDF Functionality
I’ve recently set up a new Epson printer and everything is running smoothly, except for the fact that MS Print to PDF is not functioning properly. Despite removing it in Windows features and attempting to reinstall it, an error message pops up. I then tried to use the DISM commands to remove and reinstall it, but unfortunately, it was unsuccessful.
During the process, I disabled the feature using the command:
“`bash
dism /Online /Disable-Feature /FeatureName:”Printing-PrintToPDFServices-Features” /NoRestart
“`
After which I attempted to enable the feature again with the command:
“`bash
dism /Online /Enable-Feature /FeatureName:”Printing-PrintToPDFServices-Features” /NoRestart
“`
However, I encountered the following error: 0x800f0922. As a result, the DISM operation failed to execute.
Additionally, in my printer management settings, I noticed that there is no port listed for FILE: or PORTPROMPT. Could this absence of ports be the root cause of the issue? If so, how can I rectify this and restore the missing ports?
I’ve recently set up a new Epson printer and everything is running smoothly, except for the fact that MS Print to PDF is not functioning properly. Despite removing it in Windows features and attempting to reinstall it, an error message pops up. I then tried to use the DISM commands to remove and reinstall it, but unfortunately, it was unsuccessful. During the process, I disabled the feature using the command: “`bashdism /Online /Disable-Feature /FeatureName:”Printing-PrintToPDFServices-Features” /NoRestart“` After which I attempted to enable the feature again with the command: “`bashdism /Online /Enable-Feature /FeatureName:”Printing-PrintToPDFServices-Features” /NoRestart“` However, I encountered the following error: 0x800f0922. As a result, the DISM operation failed to execute. Additionally, in my printer management settings, I noticed that there is no port listed for FILE: or PORTPROMPT. Could this absence of ports be the root cause of the issue? If so, how can I rectify this and restore the missing ports? Read More
أعـظم طريقة لـجلب الـحبيب 8.443 0.097.33.402
أعـظم طريقة لـجلب الـحبيب 8.443 0.097.33.402
أعـظم طريقة لـجلب الـحبيب 8.443 0.097.33.402 Read More
Incorrect Files Displayed on USB Drive
I’m encountering an issue where the file changes I’m making on a USB disk seem to be cached by Windows 11, even after making modifications on Windows 10. Despite replacing files labeled “abc” with “xyz” on Windows 10, Windows 11 still displays the original “abc” files instead of the updates. This dilemma arises despite using the 22H2 version of Windows 11. Attempting to copy one of the old files generates an error, understandably, as the file is no longer present. I’ve observed that Windows 11 continues to list outdated files that have been replaced. Interestingly, when I attempt to eject the disk in Windows 11, it refreshes and displays the correct files (even if the ejection process fails). Is there a specific setting or adjustment I can make to prevent this issue and improve the file synchronization between Windows 10 and 11?
I’m encountering an issue where the file changes I’m making on a USB disk seem to be cached by Windows 11, even after making modifications on Windows 10. Despite replacing files labeled “abc” with “xyz” on Windows 10, Windows 11 still displays the original “abc” files instead of the updates. This dilemma arises despite using the 22H2 version of Windows 11. Attempting to copy one of the old files generates an error, understandably, as the file is no longer present. I’ve observed that Windows 11 continues to list outdated files that have been replaced. Interestingly, when I attempt to eject the disk in Windows 11, it refreshes and displays the correct files (even if the ejection process fails). Is there a specific setting or adjustment I can make to prevent this issue and improve the file synchronization between Windows 10 and 11? Read More
“Ensuring Computer Stays Active for 7 Hours to Record Data”
I have an ESP32 microcontroller connected to my Windows 11 Home laptop via USB. It is logging sleep data for about 7 hours using Tera Term on the laptop. Last night, on my laptop, I configured the power settings by going to Settings > Power and Battery > Screen and Sleep. I set the options as follows:
– Screen turns off after: 5 minutes when plugged in
– Device goes to sleep after: Never when plugged in
However, I discovered in the morning that my laptop had gone to sleep after 3 hours. I had to press the power button to wake it up, and I found that Tera Term had stopped collecting data after exactly 3 hours and 22 seconds. I’m unsure if there is an error on my part in setting up Windows 11 to keep the laptop awake throughout the night while still plugged in, allowing Tera Term to continuously log data, or if this issue is a Windows 11 OS glitch. Any tips or guidance on this matter would be greatly appreciated. Thank you for your assistance.
I have an ESP32 microcontroller connected to my Windows 11 Home laptop via USB. It is logging sleep data for about 7 hours using Tera Term on the laptop. Last night, on my laptop, I configured the power settings by going to Settings > Power and Battery > Screen and Sleep. I set the options as follows:- Screen turns off after: 5 minutes when plugged in- Device goes to sleep after: Never when plugged inHowever, I discovered in the morning that my laptop had gone to sleep after 3 hours. I had to press the power button to wake it up, and I found that Tera Term had stopped collecting data after exactly 3 hours and 22 seconds. I’m unsure if there is an error on my part in setting up Windows 11 to keep the laptop awake throughout the night while still plugged in, allowing Tera Term to continuously log data, or if this issue is a Windows 11 OS glitch. Any tips or guidance on this matter would be greatly appreciated. Thank you for your assistance. Read More
Windows login locked out after BIOS update due to TPM issue
Hello everyone,
I recently updated my BIOS on Windows 11 and encountered some issues. After the update, I am unable to sign into my account. The PIN is not being recognized, and even my account/email password is being shown as incorrect.
During the BIOS update, I was prompted about clearing TPM and opted for yes, although I do not have BitLocker enabled.
I am quite stuck on how to regain access to my account, as attempting to reset the PIN on the login page results in a failure message prompting me to retry.
I attempted a registry edit to enable passwordless login, but unfortunately, I was still unable to access my desktop.
System Specs:
– CPU: AMD 5900X
– Motherboard: ROG Strix X570-E Gaming
– OS: Windows 11 Pro
Hello everyone, I recently updated my BIOS on Windows 11 and encountered some issues. After the update, I am unable to sign into my account. The PIN is not being recognized, and even my account/email password is being shown as incorrect. During the BIOS update, I was prompted about clearing TPM and opted for yes, although I do not have BitLocker enabled. I am quite stuck on how to regain access to my account, as attempting to reset the PIN on the login page results in a failure message prompting me to retry. I attempted a registry edit to enable passwordless login, but unfortunately, I was still unable to access my desktop. System Specs:- CPU: AMD 5900X- Motherboard: ROG Strix X570-E Gaming- OS: Windows 11 Pro Read More
update vector data to start with a different value at specific point.
Dear community, I’d like to ask your support to find a solution for below condition.
I have 6 vectors. time, CtTHiRes, HiResCalc, CtTgrdCalc, idx8 and TS_tClntEngOut
my goal is to calculate HiResCalc which it will have same values as CtTHiRes using CtTgrdCalc.
for ii = 2:N+1
if exist (‘time’)
HiResCalc(ii) = CtTgrdCalc(ii-1) + HiResCalc(ii-1);
end
I’m stuck trying to update HiResCalc…..
what I need to do is when idx8 = 0, HiResCalc should be updated and get whathever the valu is in TS_tClntEngOut, in this case the update happens at second 250 but it can be anyother time.
after HiResCalc is updated, calculation should continue as shonw in the script above but I don’t know how to make it…..
for ia= 1:length(HiResCalc);
if idx8(ia) == 0
HiResCalc(ia,1) = TS_tClntEngOut(ia);
end
end
here is an image for your reffrence…
as before any feedback will be highly appreciatedDear community, I’d like to ask your support to find a solution for below condition.
I have 6 vectors. time, CtTHiRes, HiResCalc, CtTgrdCalc, idx8 and TS_tClntEngOut
my goal is to calculate HiResCalc which it will have same values as CtTHiRes using CtTgrdCalc.
for ii = 2:N+1
if exist (‘time’)
HiResCalc(ii) = CtTgrdCalc(ii-1) + HiResCalc(ii-1);
end
I’m stuck trying to update HiResCalc…..
what I need to do is when idx8 = 0, HiResCalc should be updated and get whathever the valu is in TS_tClntEngOut, in this case the update happens at second 250 but it can be anyother time.
after HiResCalc is updated, calculation should continue as shonw in the script above but I don’t know how to make it…..
for ia= 1:length(HiResCalc);
if idx8(ia) == 0
HiResCalc(ia,1) = TS_tClntEngOut(ia);
end
end
here is an image for your reffrence…
as before any feedback will be highly appreciated Dear community, I’d like to ask your support to find a solution for below condition.
I have 6 vectors. time, CtTHiRes, HiResCalc, CtTgrdCalc, idx8 and TS_tClntEngOut
my goal is to calculate HiResCalc which it will have same values as CtTHiRes using CtTgrdCalc.
for ii = 2:N+1
if exist (‘time’)
HiResCalc(ii) = CtTgrdCalc(ii-1) + HiResCalc(ii-1);
end
I’m stuck trying to update HiResCalc…..
what I need to do is when idx8 = 0, HiResCalc should be updated and get whathever the valu is in TS_tClntEngOut, in this case the update happens at second 250 but it can be anyother time.
after HiResCalc is updated, calculation should continue as shonw in the script above but I don’t know how to make it…..
for ia= 1:length(HiResCalc);
if idx8(ia) == 0
HiResCalc(ia,1) = TS_tClntEngOut(ia);
end
end
here is an image for your reffrence…
as before any feedback will be highly appreciated data, analysis MATLAB Answers — New Questions
Size of the left side different from the right side
Hi everyone, I’m facing a problem with assignment because of different sizes.
I’m pretty sure the sizes are the same, its look like MATLAB refer to the input size instead of the output (in the relevant function).
the error massege: "Unable to perform assignment because the size of the left side is 1-by-6 and the size of the right side
is 1-by-108".
thanks a lot!
the problematic line:
[PersonalSPQmain(i,:),PersonalSPAnsmain(i,:)] = PersonalSPQforResponder(SParraydata(i,:));
My code -main function:
SParraydata=table2array(SPdata);
personalSPdata=zeros(51444,2);
PersonalSPQmain=zeros(8574,6);
PersonalSPAnsmain=zeros(8574,6);
j=1;
for i=1:8574
[PersonalSPQmain(i,:),PersonalSPAnsmain(i,:)] = PersonalSPQforResponder(SParraydata(i,:));
personalSPdata(j:j+5,2) = sixSPAnsLines(PersonalSPQmain(i,:),PersonalSPAnsmain(i,:));
j=j+5;
end
The relevent function:
function [PersonalSPQ,PersonalSPAns] = PersonalSPQforResponder(SPAnsVector)
PersonalSPQ=zeros(1,6);
PersonalSPAns=zeros(1,6);
j=1;
for i=1:108
if isempty(SPAnsVector(1,i))==0
PersonalSPQ(1,j)=i;
PersonalSPAns(1,j)=SPAnsVector(1,i);
j=j+1;
end
end
endHi everyone, I’m facing a problem with assignment because of different sizes.
I’m pretty sure the sizes are the same, its look like MATLAB refer to the input size instead of the output (in the relevant function).
the error massege: "Unable to perform assignment because the size of the left side is 1-by-6 and the size of the right side
is 1-by-108".
thanks a lot!
the problematic line:
[PersonalSPQmain(i,:),PersonalSPAnsmain(i,:)] = PersonalSPQforResponder(SParraydata(i,:));
My code -main function:
SParraydata=table2array(SPdata);
personalSPdata=zeros(51444,2);
PersonalSPQmain=zeros(8574,6);
PersonalSPAnsmain=zeros(8574,6);
j=1;
for i=1:8574
[PersonalSPQmain(i,:),PersonalSPAnsmain(i,:)] = PersonalSPQforResponder(SParraydata(i,:));
personalSPdata(j:j+5,2) = sixSPAnsLines(PersonalSPQmain(i,:),PersonalSPAnsmain(i,:));
j=j+5;
end
The relevent function:
function [PersonalSPQ,PersonalSPAns] = PersonalSPQforResponder(SPAnsVector)
PersonalSPQ=zeros(1,6);
PersonalSPAns=zeros(1,6);
j=1;
for i=1:108
if isempty(SPAnsVector(1,i))==0
PersonalSPQ(1,j)=i;
PersonalSPAns(1,j)=SPAnsVector(1,i);
j=j+1;
end
end
end Hi everyone, I’m facing a problem with assignment because of different sizes.
I’m pretty sure the sizes are the same, its look like MATLAB refer to the input size instead of the output (in the relevant function).
the error massege: "Unable to perform assignment because the size of the left side is 1-by-6 and the size of the right side
is 1-by-108".
thanks a lot!
the problematic line:
[PersonalSPQmain(i,:),PersonalSPAnsmain(i,:)] = PersonalSPQforResponder(SParraydata(i,:));
My code -main function:
SParraydata=table2array(SPdata);
personalSPdata=zeros(51444,2);
PersonalSPQmain=zeros(8574,6);
PersonalSPAnsmain=zeros(8574,6);
j=1;
for i=1:8574
[PersonalSPQmain(i,:),PersonalSPAnsmain(i,:)] = PersonalSPQforResponder(SParraydata(i,:));
personalSPdata(j:j+5,2) = sixSPAnsLines(PersonalSPQmain(i,:),PersonalSPAnsmain(i,:));
j=j+5;
end
The relevent function:
function [PersonalSPQ,PersonalSPAns] = PersonalSPQforResponder(SPAnsVector)
PersonalSPQ=zeros(1,6);
PersonalSPAns=zeros(1,6);
j=1;
for i=1:108
if isempty(SPAnsVector(1,i))==0
PersonalSPQ(1,j)=i;
PersonalSPAns(1,j)=SPAnsVector(1,i);
j=j+1;
end
end
end size, assigment, error MATLAB Answers — New Questions
Folder for Windows Input Experience
When I powered up my computer this morning, I noticed a new file in the Downloads folder. The creation timestamp matched the time I woke the PC.
Exciting update: I’ve identified the file! I’m quite surprised that I had never encountered it before. (It pertains to emoji gifs)
When I powered up my computer this morning, I noticed a new file in the Downloads folder. The creation timestamp matched the time I woke the PC. Exciting update: I’ve identified the file! I’m quite surprised that I had never encountered it before. (It pertains to emoji gifs) Read More
How to create a list of units to show only those moving in the next 90 days?
I have a huge Excel list (I called Master Tracker; see screenshot) of units scheduled to move on a given date. I am using Excel 365. The list will capture one year ago from today and one year in the future from today. My master tracker is updated constantly as we add more units every month.
Master Tracker
Monthly, I create a roll-up report for my boss which I call the “Baseball Card”. I use a PowerPoint slide (see screenshot attached) to show only the units scheduled to move within the next 90 days but, I have been doing this manually and using the Master Tracker as my reference. The yellow portion in column B in the Master Tracker shows already the units that are within the 90-day window from “today” (5AUG24).
PowerPoint Baseball card
Tired of doing manual calculations, I took the Excel Master Tracker and created a second tab called Baseball Card (see screenshot attached). The purpose of this tab is to substitute the PowerPoint presentation (Baseball card) done manually to reproduce all my data by using Excel formulas as much as possible.
Excel Baseball card
I am doing well so far but the challenge I have now is to come up with a way to display a list (rows will vary depending on how many units) of “Forces projected next 90 days”. This list must display only the units (By MSC, by unit, and by country) within the next 90 days from today. I thought a Pivot table would do the trick, but I already tried and couldn’t figure it out. I really would appreciate any help on this.
I have a huge Excel list (I called Master Tracker; see screenshot) of units scheduled to move on a given date. I am using Excel 365. The list will capture one year ago from today and one year in the future from today. My master tracker is updated constantly as we add more units every month.Master TrackerMonthly, I create a roll-up report for my boss which I call the “Baseball Card”. I use a PowerPoint slide (see screenshot attached) to show only the units scheduled to move within the next 90 days but, I have been doing this manually and using the Master Tracker as my reference. The yellow portion in column B in the Master Tracker shows already the units that are within the 90-day window from “today” (5AUG24). PowerPoint Baseball cardTired of doing manual calculations, I took the Excel Master Tracker and created a second tab called Baseball Card (see screenshot attached). The purpose of this tab is to substitute the PowerPoint presentation (Baseball card) done manually to reproduce all my data by using Excel formulas as much as possible.Excel Baseball cardI am doing well so far but the challenge I have now is to come up with a way to display a list (rows will vary depending on how many units) of “Forces projected next 90 days”. This list must display only the units (By MSC, by unit, and by country) within the next 90 days from today. I thought a Pivot table would do the trick, but I already tried and couldn’t figure it out. I really would appreciate any help on this. Read More
NEW Copilot Customer Adoption | Train the Trainer Digital Series
Join us for a monthly Train the trainer session on how to use the Partner-led Copilot Immersion Experience, providing partners the ability to demo unique scenarios and help customers (including spaces); make clear what you’re promoting and why it matters with hands-on experiences with Copilot for Microsoft 365. In this session, we will walk you through role/persona scenarios showcasing how Copilot can help businesses solve common problems and streamline business processes, automate repetitive tasks, and unlock productivity.
Train the Trainer | Copilot Customer Adoption Schedule
Americas/EMEA: September 18 | 8:00 AM – 9:00 AM, Pacific Time
APAC: September 18 | 5:00 PM – 6:00 PM, Pacific Time
Register Today! or invite your resellers with the attached invite.
Join us for a monthly Train the trainer session on how to use the Partner-led Copilot Immersion Experience, providing partners the ability to demo unique scenarios and help customers (including spaces); make clear what you’re promoting and why it matters with hands-on experiences with Copilot for Microsoft 365. In this session, we will walk you through role/persona scenarios showcasing how Copilot can help businesses solve common problems and streamline business processes, automate repetitive tasks, and unlock productivity.
Train the Trainer | Copilot Customer Adoption Schedule
Americas/EMEA: September 18 | 8:00 AM – 9:00 AM, Pacific Time
APAC: September 18 | 5:00 PM – 6:00 PM, Pacific Time
Register Today! or invite your resellers with the attached invite. Read More
SharePoint Document Library Request Sign-Off comments not displaying
I am attempting to use the native SharePoint feature in a document library… Select the file, and then select Automate and select Request Sign-Off.
The process works fine accept for the following.
When the user receives the message, they select the accept option and fills in the comment box.
The document is posted to SP as approved but the comments are not displayed.
When selecting the document and then looking at the information section on the right side of the screen, under “Activity”, SharePoint displays “this item has no comments”.
How do I view the comments provided by the user who approved the document?
Thanks.
I am attempting to use the native SharePoint feature in a document library… Select the file, and then select Automate and select Request Sign-Off.The process works fine accept for the following.When the user receives the message, they select the accept option and fills in the comment box.The document is posted to SP as approved but the comments are not displayed.When selecting the document and then looking at the information section on the right side of the screen, under “Activity”, SharePoint displays “this item has no comments”.How do I view the comments provided by the user who approved the document?Thanks. Read More
Troubleshooting Screenshots Issues: A Guide to Resolving Problems
When capturing a screenshot on my new Windows 11 computer, I press the Windows key along with the Print Screen button. The screenshot is then saved in a folder named “Screenshots” within the files. However, I am encountering an issue where the screenshot appears as computer code when I try to open it. This problem is new to me, as I have not faced any difficulties with taking screenshots using the described method before. I seek assistance in resolving this issue.
When capturing a screenshot on my new Windows 11 computer, I press the Windows key along with the Print Screen button. The screenshot is then saved in a folder named “Screenshots” within the files. However, I am encountering an issue where the screenshot appears as computer code when I try to open it. This problem is new to me, as I have not faced any difficulties with taking screenshots using the described method before. I seek assistance in resolving this issue. Read More
Recent File List Missing from Jump List After 11/15 Updates
I rely heavily on the “recent files” feature on my jump lists to attach files to my Gmail emails. However, following the installation of Windows updates on 11/15, this option seems to have vanished from my system.
Despite ensuring that the “show recent files” settings are correctly configured in both my personalization and system settings, no solution from available tutorials or online research has resolved this issue.
The recent files were consistently displayed until recently, making me suspect that the problem may have been triggered by the Windows updates installed on 11/15.
I rely heavily on the “recent files” feature on my jump lists to attach files to my Gmail emails. However, following the installation of Windows updates on 11/15, this option seems to have vanished from my system. Despite ensuring that the “show recent files” settings are correctly configured in both my personalization and system settings, no solution from available tutorials or online research has resolved this issue. The recent files were consistently displayed until recently, making me suspect that the problem may have been triggered by the Windows updates installed on 11/15. Read More
Jump List Missing Recent Files After Updates on 11/15
I rely heavily on the “recent files” feature in my jump lists, especially when attaching files to emails in Gmail. However, this useful option seems to have mysteriously vanished since the installation of the latest Windows updates on 11/15.
Despite ensuring that the “show recent files” settings are properly configured in my personalization and other system settings, I have been unable to resolve the issue. Numerous tutorials and online resources have failed to provide a solution to this sudden disappearance of recent files.
I had been consistently seeing the recent files until they abruptly ceased to appear, leading me to suspect that the problem may be linked to the Windows updates installed on 11/15.
I rely heavily on the “recent files” feature in my jump lists, especially when attaching files to emails in Gmail. However, this useful option seems to have mysteriously vanished since the installation of the latest Windows updates on 11/15. Despite ensuring that the “show recent files” settings are properly configured in my personalization and other system settings, I have been unable to resolve the issue. Numerous tutorials and online resources have failed to provide a solution to this sudden disappearance of recent files. I had been consistently seeing the recent files until they abruptly ceased to appear, leading me to suspect that the problem may be linked to the Windows updates installed on 11/15. Read More
Can you suggest a no-cost Windows 11 PE tool for fixing the MBR?
The free version of AOMEI does not support creating a bootable USB drive, and it seems that Gandalf’s tool requires a $20 donation. Do you know of any free software that can be used to create a bootable USB drive?
The free version of AOMEI does not support creating a bootable USB drive, and it seems that Gandalf’s tool requires a $20 donation. Do you know of any free software that can be used to create a bootable USB drive? Read More
How can I increase the folder tree indent in Explorer’s navigation pane?
Is there a way to easily adjust the indent of the folder tree displayed in the navigation pane of Explorer?
I found Windows 10 to be more user-friendly, but in Windows 11, the lack of indentation is visually distracting and inconvenient.
Thank you,
Mike.
Is there a way to easily adjust the indent of the folder tree displayed in the navigation pane of Explorer?I found Windows 10 to be more user-friendly, but in Windows 11, the lack of indentation is visually distracting and inconvenient.Thank you,Mike. Read More
Troubleshooting Black Screen Issue When Loading MSI Katana GF66 with Windows 11 Pro v. 23H2
I am experiencing difficulties booting into my MSI Katana GF66 laptop, running Windows 11 Pro version 23H2. Initially, an Explorer window refused to appear on the screen while minimized, leading me to open Task Manager. Unfortunately, Task Manager became unresponsive, forcing me to close and reopen it. Despite attempting to restart Explorer from Task Manager, the issue persisted. Following a forced shutdown using the power button, I am now completely unable to boot into Windows.
Initially, the boot process was excessively slow, eventually leading to the login screen. However, after entering my password, the screen turned black without Windows loading. Despite numerous attempts using the “F” keys, I struggled to access the advanced startup options.
It is crucial for me to avoid resetting Windows at all costs due to various reasons. As an experienced corporate IT help desk professional with 25 years of expertise, I am capable of performing this task on my own. Hence, I am in search of alternative methods to repair what appears to be a corrupted boot partition.
The actions I have taken thus far include accessing Windows Advanced Startup Repair Options, which unfortunately informed me that it could not repair the issue. I also launched the command prompt from the Advanced Startup Repair and ran SFC /SCANNOW, which detected and purportedly repaired issues. However, DISM did not recognize the necessary options or switches for cleanup image or restorehealth.
Despite my efforts, I was unable to access Safe Mode, encountering errors during the process. Following online research, I found suggestions to run commands such as BOOTREC/FIXMBR, BOOTREC/FIXBOOT, BOOTSECT /NT60 SYS, and BOOTREC /REBUILDBCD to address potential boot-related problems.
Currently, I am seeking classic diagnostic software that can be booted from a USB flash drive, akin to the older “Hirens” utility. I possess a secondary laptop, a 12-year-old HP DV7 Entertainment running Windows 10 Pro, which I have had fewer issues with compared to the newer MSI Katana.
I am in urgent need of assistance with resolving this issue and would greatly appreciate prompt support. Thank you for your help.
I am experiencing difficulties booting into my MSI Katana GF66 laptop, running Windows 11 Pro version 23H2. Initially, an Explorer window refused to appear on the screen while minimized, leading me to open Task Manager. Unfortunately, Task Manager became unresponsive, forcing me to close and reopen it. Despite attempting to restart Explorer from Task Manager, the issue persisted. Following a forced shutdown using the power button, I am now completely unable to boot into Windows. Initially, the boot process was excessively slow, eventually leading to the login screen. However, after entering my password, the screen turned black without Windows loading. Despite numerous attempts using the “F” keys, I struggled to access the advanced startup options. It is crucial for me to avoid resetting Windows at all costs due to various reasons. As an experienced corporate IT help desk professional with 25 years of expertise, I am capable of performing this task on my own. Hence, I am in search of alternative methods to repair what appears to be a corrupted boot partition. The actions I have taken thus far include accessing Windows Advanced Startup Repair Options, which unfortunately informed me that it could not repair the issue. I also launched the command prompt from the Advanced Startup Repair and ran SFC /SCANNOW, which detected and purportedly repaired issues. However, DISM did not recognize the necessary options or switches for cleanup image or restorehealth. Despite my efforts, I was unable to access Safe Mode, encountering errors during the process. Following online research, I found suggestions to run commands such as BOOTREC/FIXMBR, BOOTREC/FIXBOOT, BOOTSECT /NT60 SYS, and BOOTREC /REBUILDBCD to address potential boot-related problems. Currently, I am seeking classic diagnostic software that can be booted from a USB flash drive, akin to the older “Hirens” utility. I possess a secondary laptop, a 12-year-old HP DV7 Entertainment running Windows 10 Pro, which I have had fewer issues with compared to the newer MSI Katana. I am in urgent need of assistance with resolving this issue and would greatly appreciate prompt support. Thank you for your help. Read More
MATLAB Arduino Uno Simulink doesn’t have option for Connected IO Mode
Hello;
I’m trying to use Simulink to get input from Beckhoff TwinCAT (reading an EtherCAT sensor) and then output it to an Arduino as a set of PWM waves (to control some coil currents). To do this, I’m trying to link the TwinCAT integration to the Simulink Support Package for Arduino Hardware on MATLAB R2021a on a laptop running MATLAB R2021a; however, I don’t see the option to switch the mode to Connected IO in the top Hardware bar. I have tried enabling Connected IO in the hardware settings for the Arduino Uno on Simulink, but the option is still not showing up.
Is there something else I am missing?Hello;
I’m trying to use Simulink to get input from Beckhoff TwinCAT (reading an EtherCAT sensor) and then output it to an Arduino as a set of PWM waves (to control some coil currents). To do this, I’m trying to link the TwinCAT integration to the Simulink Support Package for Arduino Hardware on MATLAB R2021a on a laptop running MATLAB R2021a; however, I don’t see the option to switch the mode to Connected IO in the top Hardware bar. I have tried enabling Connected IO in the hardware settings for the Arduino Uno on Simulink, but the option is still not showing up.
Is there something else I am missing? Hello;
I’m trying to use Simulink to get input from Beckhoff TwinCAT (reading an EtherCAT sensor) and then output it to an Arduino as a set of PWM waves (to control some coil currents). To do this, I’m trying to link the TwinCAT integration to the Simulink Support Package for Arduino Hardware on MATLAB R2021a on a laptop running MATLAB R2021a; however, I don’t see the option to switch the mode to Connected IO in the top Hardware bar. I have tried enabling Connected IO in the hardware settings for the Arduino Uno on Simulink, but the option is still not showing up.
Is there something else I am missing? r2021a, simulink, arduino MATLAB Answers — New Questions
readtable struggling to interpret spreadsheet as numbers
Hi folks,
I’m trying to use the readtable function to interpret a spreadsheet "Alberta.csv". I’ve tried using detectImportOpts, sadly the variables are arranged in rows and readtable seems to want to detect them as columns.
The next attempt was as follows:
seriesAL = table2dataset(rows2vars(readtable("Alberta.csv", ReadRowNames=1, MissingRule="omitrow")));
or
seriesAL = table2array(rows2vars(readtable("Alberta.csv", ReadRowNames=1, MissingRule="omitrow")));
then if I try to complete an operation:
rgdp_AL = log(0.001 .* seriesAL{:,40})
Matlab tells me I’m using too many input arguments… If I enter:
seriesAL(:,40), I’m failing to get numbers, yet seriesAL{} doesn’t want to provide the full column of values!
I’m getting very confused by the way Matlab uses tables, cells, structs, etc… Can anyone help me get numbers?Hi folks,
I’m trying to use the readtable function to interpret a spreadsheet "Alberta.csv". I’ve tried using detectImportOpts, sadly the variables are arranged in rows and readtable seems to want to detect them as columns.
The next attempt was as follows:
seriesAL = table2dataset(rows2vars(readtable("Alberta.csv", ReadRowNames=1, MissingRule="omitrow")));
or
seriesAL = table2array(rows2vars(readtable("Alberta.csv", ReadRowNames=1, MissingRule="omitrow")));
then if I try to complete an operation:
rgdp_AL = log(0.001 .* seriesAL{:,40})
Matlab tells me I’m using too many input arguments… If I enter:
seriesAL(:,40), I’m failing to get numbers, yet seriesAL{} doesn’t want to provide the full column of values!
I’m getting very confused by the way Matlab uses tables, cells, structs, etc… Can anyone help me get numbers? Hi folks,
I’m trying to use the readtable function to interpret a spreadsheet "Alberta.csv". I’ve tried using detectImportOpts, sadly the variables are arranged in rows and readtable seems to want to detect them as columns.
The next attempt was as follows:
seriesAL = table2dataset(rows2vars(readtable("Alberta.csv", ReadRowNames=1, MissingRule="omitrow")));
or
seriesAL = table2array(rows2vars(readtable("Alberta.csv", ReadRowNames=1, MissingRule="omitrow")));
then if I try to complete an operation:
rgdp_AL = log(0.001 .* seriesAL{:,40})
Matlab tells me I’m using too many input arguments… If I enter:
seriesAL(:,40), I’m failing to get numbers, yet seriesAL{} doesn’t want to provide the full column of values!
I’m getting very confused by the way Matlab uses tables, cells, structs, etc… Can anyone help me get numbers? readtable, struct MATLAB Answers — New Questions
Read Aloud on Mac vs. Read Aloud on iPad
This should be simple, but it’s proving not to be.
I recently discovered that the Read Aloud voice on my iPad is worlds better than the Read Aloud voices available on my Mac.
I’ve downloaded the two “Premium” voices on the Mac, Ava and Zoe, and neither come close to the “female” voice on the iPad, which does a truly remarkable job of reading text out loud.
Does anyone know how to access that same female voice that’s on the iPad on the Mac?
This should be simple, but it’s proving not to be. I recently discovered that the Read Aloud voice on my iPad is worlds better than the Read Aloud voices available on my Mac. I’ve downloaded the two “Premium” voices on the Mac, Ava and Zoe, and neither come close to the “female” voice on the iPad, which does a truly remarkable job of reading text out loud. Does anyone know how to access that same female voice that’s on the iPad on the Mac? Read More
