Hello, I have recently started learning about Battery Pack Modelling using Simulink/Simscape through the "Battery Pack Modelling" Self-Paced Online Course offered by MathWorks. I am taking the course through the Chrome Browser (Simulink Online) for the simulinkR2024b version.
Presently, I am facing an issue under Section 2.1 – Pack Modelling of this course due to which my progress has come to a halt. The problem I am experiencing is related to Task 4 in the exercise "Exploring the Custom Battery Pack Block" of the particular section I mentioned above. I am unable to proceed ahead with the completion of the exercise as the "Training Assessment" fails each and every time I click the submit button even though I have clearly and carefully followed the instructions provided and completed the given task.
To give a brief summary and clarify the context, in Task 4, we have to observe the battery voltages in the simulation. We have to start by right-clicking the batteryVoltage port of the Battery Pack and selecting Log Selected Signals. Next, we have to change the Stop Time in the Simulate section to 200. After that, we have to navigate to the Simulation tab and click Run to execute the model. Once the simulation is complete, we have to access the Data Inspector from the Review Results section. The Simulation Data Inspector window appears, and we have to click and select NewPack(8). A dialog box titled Multidimensional Signal appears, where we have to select Convert to channels (24) and then choose NewPack (1,1) and NewPack (10,1) to view the battery voltages.
Now the difficulty I encountered while performing the task is that after running the simulation and opening up Data Inspector from the Review Results section, I am not shown the option of NewPack(8) as mentioned in the instructions and instead shown NewPack:3 (8). Also, when I click and select NewPack:3 (8), I am not presented with the option of Convert to channels (24) and instead presented with Convert to channels (8). As a result, there are no options such as NewPack (1,1) and NewPack (10,1) to select in order to observe the battery voltages. I believe the "Training Assessment" fails when I click submit because I don’t meet the criteria specified in the instructions. However, despite re-running the task multiple times, I consistently receive the same set of options to select, not the ones specified in the task instructions. Hence, I am unable to proceed further.
Could someone verify whether there are any problems with the assessment or the proposed solution?
I have attached screenshots for reference.Hello, I have recently started learning about Battery Pack Modelling using Simulink/Simscape through the "Battery Pack Modelling" Self-Paced Online Course offered by MathWorks. I am taking the course through the Chrome Browser (Simulink Online) for the simulinkR2024b version.
Presently, I am facing an issue under Section 2.1 – Pack Modelling of this course due to which my progress has come to a halt. The problem I am experiencing is related to Task 4 in the exercise "Exploring the Custom Battery Pack Block" of the particular section I mentioned above. I am unable to proceed ahead with the completion of the exercise as the "Training Assessment" fails each and every time I click the submit button even though I have clearly and carefully followed the instructions provided and completed the given task.
To give a brief summary and clarify the context, in Task 4, we have to observe the battery voltages in the simulation. We have to start by right-clicking the batteryVoltage port of the Battery Pack and selecting Log Selected Signals. Next, we have to change the Stop Time in the Simulate section to 200. After that, we have to navigate to the Simulation tab and click Run to execute the model. Once the simulation is complete, we have to access the Data Inspector from the Review Results section. The Simulation Data Inspector window appears, and we have to click and select NewPack(8). A dialog box titled Multidimensional Signal appears, where we have to select Convert to channels (24) and then choose NewPack (1,1) and NewPack (10,1) to view the battery voltages.
Now the difficulty I encountered while performing the task is that after running the simulation and opening up Data Inspector from the Review Results section, I am not shown the option of NewPack(8) as mentioned in the instructions and instead shown NewPack:3 (8). Also, when I click and select NewPack:3 (8), I am not presented with the option of Convert to channels (24) and instead presented with Convert to channels (8). As a result, there are no options such as NewPack (1,1) and NewPack (10,1) to select in order to observe the battery voltages. I believe the "Training Assessment" fails when I click submit because I don’t meet the criteria specified in the instructions. However, despite re-running the task multiple times, I consistently receive the same set of options to select, not the ones specified in the task instructions. Hence, I am unable to proceed further.
Could someone verify whether there are any problems with the assessment or the proposed solution?
I have attached screenshots for reference. Hello, I have recently started learning about Battery Pack Modelling using Simulink/Simscape through the "Battery Pack Modelling" Self-Paced Online Course offered by MathWorks. I am taking the course through the Chrome Browser (Simulink Online) for the simulinkR2024b version.
Presently, I am facing an issue under Section 2.1 – Pack Modelling of this course due to which my progress has come to a halt. The problem I am experiencing is related to Task 4 in the exercise "Exploring the Custom Battery Pack Block" of the particular section I mentioned above. I am unable to proceed ahead with the completion of the exercise as the "Training Assessment" fails each and every time I click the submit button even though I have clearly and carefully followed the instructions provided and completed the given task.
To give a brief summary and clarify the context, in Task 4, we have to observe the battery voltages in the simulation. We have to start by right-clicking the batteryVoltage port of the Battery Pack and selecting Log Selected Signals. Next, we have to change the Stop Time in the Simulate section to 200. After that, we have to navigate to the Simulation tab and click Run to execute the model. Once the simulation is complete, we have to access the Data Inspector from the Review Results section. The Simulation Data Inspector window appears, and we have to click and select NewPack(8). A dialog box titled Multidimensional Signal appears, where we have to select Convert to channels (24) and then choose NewPack (1,1) and NewPack (10,1) to view the battery voltages.
Now the difficulty I encountered while performing the task is that after running the simulation and opening up Data Inspector from the Review Results section, I am not shown the option of NewPack(8) as mentioned in the instructions and instead shown NewPack:3 (8). Also, when I click and select NewPack:3 (8), I am not presented with the option of Convert to channels (24) and instead presented with Convert to channels (8). As a result, there are no options such as NewPack (1,1) and NewPack (10,1) to select in order to observe the battery voltages. I believe the "Training Assessment" fails when I click submit because I don’t meet the criteria specified in the instructions. However, despite re-running the task multiple times, I consistently receive the same set of options to select, not the ones specified in the task instructions. Hence, I am unable to proceed further.
Could someone verify whether there are any problems with the assessment or the proposed solution?
I have attached screenshots for reference. battery pack modelling, self-paced online course, simscape, simulink MATLAB Answers — New Questions

​