Category: Microsoft
Category Archives: Microsoft
Purview eDiscovery: Exported email shown as forwarded – when no other evidence of being forwarded.
eDiscovery results include an email shown as forwarded (both a blue arrow in the message list against the email, and in the copy of the email “i You forwarded this message on 04/06/2024 18.36”) for which there is no other evidence of the message being forwarded.
eDiscovery searches have identified no email sent from the account at or around the reported time (18.36) of the reportedly forwarded email. A Purview Audit search of the user’s activity shows no matching activity around that time.
Why would the message be shown as forwarded when it apparently has not been?
eDiscovery results include an email shown as forwarded (both a blue arrow in the message list against the email, and in the copy of the email “i You forwarded this message on 04/06/2024 18.36”) for which there is no other evidence of the message being forwarded. eDiscovery searches have identified no email sent from the account at or around the reported time (18.36) of the reportedly forwarded email. A Purview Audit search of the user’s activity shows no matching activity around that time. Why would the message be shown as forwarded when it apparently has not been? Read More
How to become solution partner ?
Hi,
We are an IT software development firm seeking to become a Microsoft Solution Partner. We are looking for guidance on the requirements and the necessary steps to start this process. Any assistance from experienced professionals in this area would be greatly appreciated.
Hi,We are an IT software development firm seeking to become a Microsoft Solution Partner. We are looking for guidance on the requirements and the necessary steps to start this process. Any assistance from experienced professionals in this area would be greatly appreciated. Read More
Sharepoint combined with Dynamics 365 – Throttling issues
Hi everyone,
I’m reaching out to get some insights on how others have tackled a challenge we’re facing:
Throttling-limit issues in SharePoint when accessed from Dynamics 365: How have you managed these problems? Are you using multiple default libraries and site libraries that can be selected from CRM, or is there another best practice you recommend?
Thanks in advance for your help!
Hi everyone,I’m reaching out to get some insights on how others have tackled a challenge we’re facing:Throttling-limit issues in SharePoint when accessed from Dynamics 365: How have you managed these problems? Are you using multiple default libraries and site libraries that can be selected from CRM, or is there another best practice you recommend?Thanks in advance for your help! Read More
How we can create a link to the Planner Task inside power apps
I have a canvas power apps application which show a list of planner tasks, as follow;-
Set(varInProgress,true);
ClearCollect(finalResult,{PlanTitle:””,TaskTitle:””,Status:””,AssignedToUserId:””,DueDate:””});
Clear(colRelatedGroupsIds);
Clear(colRelatedPlanners);
Clear(colRelatedPlannerTasks);
ClearCollect(colTeamSitesItem,Filter(‘Team Sites’,1=1));
ClearCollect(colAllGroups,Office365Groups.ListGroups().value);
ForAll(colAllGroups As group,
ForAll(colTeamSitesItem As i2,
If(Lower(group.displayName)=Lower(i2.’Team Site Name’),
Collect(colRelatedGroupsIds,group.id))));
ForAll(colRelatedGroupsIds As group,
Collect(colRelatedPlanners,
Planner.ListGroupPlans(group.Value).value);
ForAll(colRelatedPlanners As planner,
Collect(colRelatedPlannerTasks,
Planner.ListTasksV3(planner.id,group.Value).value);
ForAll(colRelatedPlannerTasks As task,
ForAll(task._assignments As taskAssignment,
Patch(finalResult,Defaults(finalResult),
{
PlanTitle:planner.title,
AssignedToUserId:taskAssignment.userId,
Status:task.percentComplete,
TaskTitle:task.title,
DueDate:task.dueDateTime
})
));RemoveIf(colRelatedPlannerTasks,true));RemoveIf(colRelatedPlanners,true));
Set(varInProgress,false);
then i am populating the finalResult collection inside gallery. my question is how i can build a url/link for the planner task? so when the user click on the link it will redirect the user to the Planner Task, seems all the available methods’ properties do not provide the task url:-
so can we get this or build it manually? any advice?
I have a canvas power apps application which show a list of planner tasks, as follow;- Set(varInProgress,true);
ClearCollect(finalResult,{PlanTitle:””,TaskTitle:””,Status:””,AssignedToUserId:””,DueDate:””});
Clear(colRelatedGroupsIds);
Clear(colRelatedPlanners);
Clear(colRelatedPlannerTasks);
ClearCollect(colTeamSitesItem,Filter(‘Team Sites’,1=1));
ClearCollect(colAllGroups,Office365Groups.ListGroups().value);
ForAll(colAllGroups As group,
ForAll(colTeamSitesItem As i2,
If(Lower(group.displayName)=Lower(i2.’Team Site Name’),
Collect(colRelatedGroupsIds,group.id))));
ForAll(colRelatedGroupsIds As group,
Collect(colRelatedPlanners,
Planner.ListGroupPlans(group.Value).value);
ForAll(colRelatedPlanners As planner,
Collect(colRelatedPlannerTasks,
Planner.ListTasksV3(planner.id,group.Value).value);
ForAll(colRelatedPlannerTasks As task,
ForAll(task._assignments As taskAssignment,
Patch(finalResult,Defaults(finalResult),
{
PlanTitle:planner.title,
AssignedToUserId:taskAssignment.userId,
Status:task.percentComplete,
TaskTitle:task.title,
DueDate:task.dueDateTime
})
));RemoveIf(colRelatedPlannerTasks,true));RemoveIf(colRelatedPlanners,true));
Set(varInProgress,false); then i am populating the finalResult collection inside gallery. my question is how i can build a url/link for the planner task? so when the user click on the link it will redirect the user to the Planner Task, seems all the available methods’ properties do not provide the task url:- so can we get this or build it manually? any advice? Read More
Need help with developer account registration form
Hello, everyone!
I want to publish my extension on Microsoft Edge Add-ons. I was following the guide Publish a Microsoft Edge extension and it linked me to this page to register as a developer.
I then filled the form, with all required fields filled out, and clicked submit. But it then tell me to “choose a state or province” under the “State/Province” input box, even though I’ve filled it out!
After playing with the form for a while, I discover that if I select “United States” or “Canada”, the “State/Province” input box turns into a drop-down list, and I can select one from the list. I haven’t tried submitting the form though, as that would set the country for my account to the US and it’s not possible to change it later.
I suspect this is a bug on Microsoft’s server. But in any case, I would greatly appreciate your help to get me through this registration form.
Hello, everyone! I want to publish my extension on Microsoft Edge Add-ons. I was following the guide Publish a Microsoft Edge extension and it linked me to this page to register as a developer. I then filled the form, with all required fields filled out, and clicked submit. But it then tell me to “choose a state or province” under the “State/Province” input box, even though I’ve filled it out! After playing with the form for a while, I discover that if I select “United States” or “Canada”, the “State/Province” input box turns into a drop-down list, and I can select one from the list. I haven’t tried submitting the form though, as that would set the country for my account to the US and it’s not possible to change it later. I suspect this is a bug on Microsoft’s server. But in any case, I would greatly appreciate your help to get me through this registration form. Read More
Assistance Needed: Appeal for Microsoft Certification Profile Ban Removal
Hello Microsoft Tech Community,
I am reaching out in hopes of connecting with someone from the Microsoft Learn Security Team. Unfortunately, there has been a misunderstanding during one of my exams, resulting in a ban on my Microsoft Certification Profile from scheduling or taking any further certification exams.
I have made several appeals for the removal of the ban but have not yet received a response from the Microsoft Learn Security Team. The certification I am pursuing is critical for my professional development and career advancement.
I kindly request assistance from the community or any team member who can guide me on how to resolve this issue. Your help in lifting this ban would be immensely appreciated.
Thank you for your attention to this matter.
Hello Microsoft Tech Community, I am reaching out in hopes of connecting with someone from the Microsoft Learn Security Team. Unfortunately, there has been a misunderstanding during one of my exams, resulting in a ban on my Microsoft Certification Profile from scheduling or taking any further certification exams. I have made several appeals for the removal of the ban but have not yet received a response from the Microsoft Learn Security Team. The certification I am pursuing is critical for my professional development and career advancement. I kindly request assistance from the community or any team member who can guide me on how to resolve this issue. Your help in lifting this ban would be immensely appreciated. Thank you for your attention to this matter. Read More
Copilot for M365 -> access local/network files – > Any other options?
I have a question regarding the access of M365 to local and network files and what other options I might have.
I’ve noticed that Copilot for Teams has access to OneDrive, but Copilot for Word, Excel, and PowerPoint, for example, can only access SharePoint links. Can you confirm this?
I have also found that Copilot does not have access to local files or network files.
I once heard from an IT service provider that Microsoft is working on a copilot that would have access to local/network files. Is this true?
Since the current Copilot for M365 does not have access to local/network files, I would like to ask the following question: Is there another AI tool from a third-party provider that has access to local files and network files?
I have a question regarding the access of M365 to local and network files and what other options I might have.I’ve noticed that Copilot for Teams has access to OneDrive, but Copilot for Word, Excel, and PowerPoint, for example, can only access SharePoint links. Can you confirm this?I have also found that Copilot does not have access to local files or network files.I once heard from an IT service provider that Microsoft is working on a copilot that would have access to local/network files. Is this true?Since the current Copilot for M365 does not have access to local/network files, I would like to ask the following question: Is there another AI tool from a third-party provider that has access to local files and network files? Read More
Could someone kindly share a solution to the error 404 in Quick-Books after new update?
I’m experiencing “Quick-Books Error 404” while trying to use my software. What causes this error and how can I troubleshoot and fix it?
I’m experiencing “Quick-Books Error 404” while trying to use my software. What causes this error and how can I troubleshoot and fix it? Read More
How to migrate Azure vNET-integrated API-Management stv1 to stv2?
We currently have a prod and dev stv1 API-Management, both still running in the developer tariff.
My goal is to migrate the prod to stv2-standard and the dev to stv2 dev-tariff.
However I have the following challanges:
Backup & Restore from stv1 dev to stv2 standard does not workthere is currently no stv2 dev-tariff, it’s visible on many pages from microsoft but I cannot select it in azure. That would mean we’d need two stv2 standard tariffs which doubles the cost. Is there any information if this ever will be released and if yes, when?
Because of the above two problems I cannot try out the migration with a way back (duplicate API management from backup) because the migration with changing the network has no way back.
Of course I could setup a new stv2 API-management but the effort to setup everything is very high so I’d like to avoid that.
Has anyone done it already and can share information which could help me to do this migration?
We currently have a prod and dev stv1 API-Management, both still running in the developer tariff.My goal is to migrate the prod to stv2-standard and the dev to stv2 dev-tariff. However I have the following challanges:Backup & Restore from stv1 dev to stv2 standard does not workthere is currently no stv2 dev-tariff, it’s visible on many pages from microsoft but I cannot select it in azure. That would mean we’d need two stv2 standard tariffs which doubles the cost. Is there any information if this ever will be released and if yes, when? Because of the above two problems I cannot try out the migration with a way back (duplicate API management from backup) because the migration with changing the network has no way back. Of course I could setup a new stv2 API-management but the effort to setup everything is very high so I’d like to avoid that. Has anyone done it already and can share information which could help me to do this migration? Read More
NCE subscription transfer option
Since a few days we can finally use the NCE Subscription Transfer capability: Transfer a customer’s new commerce license-based subscriptions from one transacting Cloud Solution Provider (CSP) partner to another. – Partner Center | Microsoft Learn
But how does the transfer impact promotions, like BttC2, DMWL and others? Above documentation doesn’t provide an answer for this.
And will this capability also be extended towards Software Subscriptions and Software Perpetual?
Since a few days we can finally use the NCE Subscription Transfer capability: Transfer a customer’s new commerce license-based subscriptions from one transacting Cloud Solution Provider (CSP) partner to another. – Partner Center | Microsoft Learn But how does the transfer impact promotions, like BttC2, DMWL and others? Above documentation doesn’t provide an answer for this. And will this capability also be extended towards Software Subscriptions and Software Perpetual? Read More
Allow call recording only for a call queue
Hey community!
Is it currently possible to enable call-recording for teams voice calls only for calls received over a call queue?
I know that it could be achieved with assigning a user a Calling policy with “Cloud recording for calling” enabled, but the would give that user the right to record all his calls. I want him to only be able to record the call if it’s received from the call queue. Is it possible to assign a calling policy to a call queue? No luck yet with powershell 🙁
I know that automatic recording is atm only possobile through third-party software. Thats not what I’m looking for.
Thank you and best regards
Chris
Hey community! Is it currently possible to enable call-recording for teams voice calls only for calls received over a call queue? I know that it could be achieved with assigning a user a Calling policy with “Cloud recording for calling” enabled, but the would give that user the right to record all his calls. I want him to only be able to record the call if it’s received from the call queue. Is it possible to assign a calling policy to a call queue? No luck yet with powershell 🙁 I know that automatic recording is atm only possobile through third-party software. Thats not what I’m looking for. Thank you and best regardsChris Read More
How do I fix bank error 108 in Quick-Books Online after update?
I’ve been experiencing “Error 108” in Quick-Books and need help resolving it. What are the common causes of this error, and what steps can I take to troubleshoot and fix it?
I’ve been experiencing “Error 108” in Quick-Books and need help resolving it. What are the common causes of this error, and what steps can I take to troubleshoot and fix it? Read More
hi i am having some issue in MS project progress update of fixed duration task
in the above schedule task-6 slab formwork is started before the predecessor task has finished. say it started on 05-06-2024 and i am updating the progress on end of 12th day i.e 16-06-2024. so in the update task dialouge box when i enter the following details
% of complete as 50%
actual start as -05-06-2024
remaining duration as 12days
actual duration as 12days
once i press enter the result showing as 100% completed as per below picture , instead of showing 50% completion how it is possible i am doing anything wrong here please help .
in the above schedule task-6 slab formwork is started before the predecessor task has finished. say it started on 05-06-2024 and i am updating the progress on end of 12th day i.e 16-06-2024. so in the update task dialouge box when i enter the following details % of complete as 50%actual start as -05-06-2024 remaining duration as 12daysactual duration as 12days once i press enter the result showing as 100% completed as per below picture , instead of showing 50% completion how it is possible i am doing anything wrong here please help . Read More
Using PowerShell to Post Channel Messages with Teams Workflows
The incoming webhook connector is a popular method to post information to Teams channels, but Microsoft seems set on retiring the Office connectors. The Teams post to channel workflow when a webhook request is received seems like is a possible replacement, but it’s not just a matter of switching mechanisms. Some PowerShell magic is needed to create a suitable adaptive card to post to the channel, which is exactly what we explain how to do here.
https://office365itpros.com/2024/06/17/teams-post-to-channel-workflow/
The incoming webhook connector is a popular method to post information to Teams channels, but Microsoft seems set on retiring the Office connectors. The Teams post to channel workflow when a webhook request is received seems like is a possible replacement, but it’s not just a matter of switching mechanisms. Some PowerShell magic is needed to create a suitable adaptive card to post to the channel, which is exactly what we explain how to do here.
https://office365itpros.com/2024/06/17/teams-post-to-channel-workflow/ Read More
Can anyone help with error code 185 in Quick-Books after new update?
I am encountering “error code 185” on my system and need assistance to resolve it. Can you provide troubleshooting steps to fix this issue?
I am encountering “error code 185” on my system and need assistance to resolve it. Can you provide troubleshooting steps to fix this issue? Read More
What are common causes and solutions for Quick-Books Error 15225 after recent update?
I’m encountering “Quick-Books Error 15225” when trying to update my software. It mentions something about not being able to verify the digital signature on the update file. How can I troubleshoot and resolve this issue?
I’m encountering “Quick-Books Error 15225” when trying to update my software. It mentions something about not being able to verify the digital signature on the update file. How can I troubleshoot and resolve this issue? Read More
Coplit for M365 -> access local/network files – > Any other options?
I have a question regarding the access of M365 to local and network files and what other options I might have.
I’ve noticed that Copilot for Teams has access to OneDrive, but Copilot for Word, Excel, and PowerPoint, for example, can only access SharePoint links. Can you confirm this?
I have also found that Copilot does not have access to local files or network files.
I once heard from an IT service provider that Microsoft is working on a copilot that would have access to local/network files. Is this true?
Since the current Copilot for M365 does not have access to local/network files, I would like to ask the following question: Is there another AI tool from a third-party provider that has access to local files and network files?
I have a question regarding the access of M365 to local and network files and what other options I might have.I’ve noticed that Copilot for Teams has access to OneDrive, but Copilot for Word, Excel, and PowerPoint, for example, can only access SharePoint links. Can you confirm this?I have also found that Copilot does not have access to local files or network files.I once heard from an IT service provider that Microsoft is working on a copilot that would have access to local/network files. Is this true?Since the current Copilot for M365 does not have access to local/network files, I would like to ask the following question: Is there another AI tool from a third-party provider that has access to local files and network files? Read More
How To Windows 11 clean and free install tutorial?
“I’m looking for a step-by-step guide on how to perform a clean and free installation of Windows 11. I’ve been experiencing issues with my current installation, and I want to start fresh with a clean slate. I’ve tried troubleshooting and updating, but nothing seems to be working, and I’m considering a clean install. However, I’m not sure where to start or what steps to take to ensure that my installation is clean and free of any bloatware or unwanted software.
”I’m looking for a step-by-step guide on how to perform a clean and free installation of Windows 11. I’ve been experiencing issues with my current installation, and I want to start fresh with a clean slate. I’ve tried troubleshooting and updating, but nothing seems to be working, and I’m considering a clean install. However, I’m not sure where to start or what steps to take to ensure that my installation is clean and free of any bloatware or unwanted software. Read More
Question about Windows 11 AI ?
I’ve been experiencing some strange behavior with Windows 11, and I’m wondering if it’s related to the AI-powered features. Lately, my system has been consuming a large amount of memory without any apparent reason, and I’ve noticed that some processes are running in the background that I don’t recognize. I’m concerned that it might be a result of Windows’ AI-driven optimization or prediction features, but I’m not sure what’s causing it or how to troubleshoot it. Has anyone else experienced similar issues with Windows 11’s AI capabilities?
I’ve been experiencing some strange behavior with Windows 11, and I’m wondering if it’s related to the AI-powered features. Lately, my system has been consuming a large amount of memory without any apparent reason, and I’ve noticed that some processes are running in the background that I don’t recognize. I’m concerned that it might be a result of Windows’ AI-driven optimization or prediction features, but I’m not sure what’s causing it or how to troubleshoot it. Has anyone else experienced similar issues with Windows 11’s AI capabilities? Read More
What Can I Do to Fix Error 193 in Quick-Books?
I’m getting Error 193 while using Quick-Books and it’s preventing me from completing certain tasks. What can I do to resolve this error? Are there specific troubleshooting steps or settings I should check in Q.B to fix Error 193?
I’m getting Error 193 while using Quick-Books and it’s preventing me from completing certain tasks. What can I do to resolve this error? Are there specific troubleshooting steps or settings I should check in Q.B to fix Error 193? Read More