write a script to input an integer number between 0 and 255, and output the number to the screen between the characters ‘< ‘ and ‘ > ‘ . This input and display operation should be repeated 10 times. After the 10th iteration the script should save all the input numbers to a text file in a human readable form.
I have no idea to do it.write a script to input an integer number between 0 and 255, and output the number to the screen between the characters ‘< ‘ and ‘ > ‘ . This input and display operation should be repeated 10 times. After the 10th iteration the script should save all the input numbers to a text file in a human readable form.
I have no idea to do it. write a script to input an integer number between 0 and 255, and output the number to the screen between the characters ‘< ‘ and ‘ > ‘ . This input and display operation should be repeated 10 times. After the 10th iteration the script should save all the input numbers to a text file in a human readable form.
I have no idea to do it.  MATLAB Answers — New Questions

​

Can anyone tell a way to create a simulation to depict the feedback diversity system wirelesscommunication using matlab 2023Can anyone tell a way to create a simulation to depict the feedback diversity system wirelesscommunication using matlab 2023 Can anyone tell a way to create a simulation to depict the feedback diversity system wirelesscommunication using matlab 2023 wireless MATLAB Answers — New Questions

​

Hello,everyone.
Recently I am working on a project of OFDM simulation. I want to use comm.RicianChannel object for the fading channel. After I read the docuument, I am confused that why the output signal of the object have the same length with the input signal? I mean that if we have a fading channel response, the conv result will make the signal longer(for delay reason), is that right?Hello,everyone.
Recently I am working on a project of OFDM simulation. I want to use comm.RicianChannel object for the fading channel. After I read the docuument, I am confused that why the output signal of the object have the same length with the input signal? I mean that if we have a fading channel response, the conv result will make the signal longer(for delay reason), is that right? Hello,everyone.
Recently I am working on a project of OFDM simulation. I want to use comm.RicianChannel object for the fading channel. After I read the docuument, I am confused that why the output signal of the object have the same length with the input signal? I mean that if we have a fading channel response, the conv result will make the signal longer(for delay reason), is that right? fading channel MATLAB Answers — New Questions

​

I am fitting 64 support vector machines to accomplish a regression task on 64-dimensional targets. At the moment, I am simply iterating through each regression and saving the individually-fit models in a cell array. I find that each model has ~2000 support vectors and would like to reduce the storage the models require by identifying which support vectors are shared among regressors and having the models point to the shared support vectors rather than duplicate them. Is there a wrapper function that can identify and consolidate shared support vectors as the models train, or must I implement this manually? I am afraid I cannot simply install Python to use sklearn.I am fitting 64 support vector machines to accomplish a regression task on 64-dimensional targets. At the moment, I am simply iterating through each regression and saving the individually-fit models in a cell array. I find that each model has ~2000 support vectors and would like to reduce the storage the models require by identifying which support vectors are shared among regressors and having the models point to the shared support vectors rather than duplicate them. Is there a wrapper function that can identify and consolidate shared support vectors as the models train, or must I implement this manually? I am afraid I cannot simply install Python to use sklearn. I am fitting 64 support vector machines to accomplish a regression task on 64-dimensional targets. At the moment, I am simply iterating through each regression and saving the individually-fit models in a cell array. I find that each model has ~2000 support vectors and would like to reduce the storage the models require by identifying which support vectors are shared among regressors and having the models point to the shared support vectors rather than duplicate them. Is there a wrapper function that can identify and consolidate shared support vectors as the models train, or must I implement this manually? I am afraid I cannot simply install Python to use sklearn. machine learning, statistics, svm, regression MATLAB Answers — New Questions

​

I have an IAD code, number of lines long. It works great on the MATLAB r2014b version but on my r2024a version at home, i get an error of the following:
Running IAD on dataset 1
zsh:1: command not found: iad
Sample1_IAD.txt
Error using movefile
No matching files named ‘XXXXXX’ were found.
Error in IAD_Analyzer_WCV_04_11_23 (line 239)
movefile(iad_output_file,strcat([pwd, ‘results’]))

Please can someone well versed in MATLAB suggest what I should change in the code to address this error in the r2024a version? It seems to be a matter of changing file location or using a different cmd from ‘movefile’ etc but I’ve tried all I know to do with no success. Thank you, I appreciate any help.I have an IAD code, number of lines long. It works great on the MATLAB r2014b version but on my r2024a version at home, i get an error of the following:
Running IAD on dataset 1
zsh:1: command not found: iad
Sample1_IAD.txt
Error using movefile
No matching files named ‘XXXXXX’ were found.
Error in IAD_Analyzer_WCV_04_11_23 (line 239)
movefile(iad_output_file,strcat([pwd, ‘results’]))

Please can someone well versed in MATLAB suggest what I should change in the code to address this error in the r2024a version? It seems to be a matter of changing file location or using a different cmd from ‘movefile’ etc but I’ve tried all I know to do with no success. Thank you, I appreciate any help. I have an IAD code, number of lines long. It works great on the MATLAB r2014b version but on my r2024a version at home, i get an error of the following:
Running IAD on dataset 1
zsh:1: command not found: iad
Sample1_IAD.txt
Error using movefile
No matching files named ‘XXXXXX’ were found.
Error in IAD_Analyzer_WCV_04_11_23 (line 239)
movefile(iad_output_file,strcat([pwd, ‘results’]))

Please can someone well versed in MATLAB suggest what I should change in the code to address this error in the r2024a version? It seems to be a matter of changing file location or using a different cmd from ‘movefile’ etc but I’ve tried all I know to do with no success. Thank you, I appreciate any help. iad code, image processing MATLAB Answers — New Questions

​

Hello everyone, I’ve just started out with Matlab for uni and am trying to add a column to a table. I ran into the following error message
Error using .
To assign to or create a variable in a table, the number of rows must match the height of the table.
My code is written below:
%Creates a table called ‘tab’ using the data in the coronavirus-cases.csv
%file.
tab = readtable("coronavirus-cases.csv");
%Creates a row of zeros with the same height as tab.
newTabCol = zeros(height(tab), 1);
%Adds the column and titles it "Seven Day Average".
tab.newTabCol = "Seven Day Average";
What confuses me is that the height of newTabCol matches tab. Both have 153772 rows:

I’m sure I’m missing something basic but any help would be appreciated.

Kind regards,

JohnHello everyone, I’ve just started out with Matlab for uni and am trying to add a column to a table. I ran into the following error message
Error using .
To assign to or create a variable in a table, the number of rows must match the height of the table.
My code is written below:
%Creates a table called ‘tab’ using the data in the coronavirus-cases.csv
%file.
tab = readtable("coronavirus-cases.csv");
%Creates a row of zeros with the same height as tab.
newTabCol = zeros(height(tab), 1);
%Adds the column and titles it "Seven Day Average".
tab.newTabCol = "Seven Day Average";
What confuses me is that the height of newTabCol matches tab. Both have 153772 rows:

I’m sure I’m missing something basic but any help would be appreciated.

Kind regards,

John Hello everyone, I’ve just started out with Matlab for uni and am trying to add a column to a table. I ran into the following error message
Error using .
To assign to or create a variable in a table, the number of rows must match the height of the table.
My code is written below:
%Creates a table called ‘tab’ using the data in the coronavirus-cases.csv
%file.
tab = readtable("coronavirus-cases.csv");
%Creates a row of zeros with the same height as tab.
newTabCol = zeros(height(tab), 1);
%Adds the column and titles it "Seven Day Average".
tab.newTabCol = "Seven Day Average";
What confuses me is that the height of newTabCol matches tab. Both have 153772 rows:

I’m sure I’m missing something basic but any help would be appreciated.

Kind regards,

John table, column, add, add column, height, zeros MATLAB Answers — New Questions

​

I have the following code in which I want to replace the column 37 in a table. I want to swap the column of categorical values for a column of numerical values.
% Open file selection dialog and allow multiple selections
[file_list, path_n] = uigetfile(‘*.csv’, ‘Select CSV Files’, ‘Multiselect’, ‘on’);

% Check if any files were selected
if ischar(file_list)
% Convert single file string to cell array
file_list = {file_list};
end

% Initialize a cell array to store the modified tables
modifiedTables = cell(length(file_list), 1);

% Loop through each selected file
for k = 1:length(file_list)
% Construct the full file path
filePath = fullfile(path_n, file_list{k});

% Import the CSV file as a table
T = readtable(filePath);

% Check if the table has at least 37 columns
if width(T) >= 37
% Extract the ‘OrderNumber’ column (column 37) and convert it to a string array
orderNumberColumn = string(T{:, 37});

% Initialize the new column as a double array with the same size as the original column
newOrderNumberColumn = zeros(size(orderNumberColumn));

% Convert the string values to doubles
for i = 1:length(orderNumberColumn)
numValue = str2double(orderNumberColumn(i));
if isnan(numValue)
% If conversion fails (non-numeric value), set the value to 0
newOrderNumberColumn(i) = 0;
else
% Otherwise, use the numeric value
newOrderNumberColumn(i) = numValue;
end
end

% Update only the 37th column with the new double column
T.(T.Properties.VariableNames{37}) = newOrderNumberColumn;
end

% Store the modified table in the cell array
modifiedTables{k} = T;
end

% Display the number of tables processed
disp([‘Number of tables processed: ‘, num2str(length(modifiedTables))]);
Unfortunately, the other columns (for example column 35, 36,38 and 39) also become affected when importing the csv files in bulk and hence my new modified table now contains NaNs even though I would like to only modify the column 37 (see "modifiedtables").
When I import via the user interface (see "imported_by_hand") or when I use the code below(see "T") that doesnt seem to happen.
T_copy = T;

% Extract the ‘OrderNumber’ column (column 37) and convert it to a string array
orderNumberColumn = string(T_copy{:, 37});

% Initialize the new column as a double array with the same size as the original column
newOrderNumberColumn = zeros(size(orderNumberColumn));

% Convert the string values to doubles
for i = 1:length(orderNumberColumn)
numValue = str2double(orderNumberColumn(i));
if isnan(numValue)
% If conversion fails (non-numeric value), set the value to 0
newOrderNumberColumn(i) = 0;
else
% Otherwise, use the numeric value
newOrderNumberColumn(i) = numValue;
end
end

% Replace the 37th column with the new double column by creating a new table
% Get the table variable names
varNames = T_copy.Properties.VariableNames;
How can I keep this from happening when I import the data in bulk?
Thanks!I have the following code in which I want to replace the column 37 in a table. I want to swap the column of categorical values for a column of numerical values.
% Open file selection dialog and allow multiple selections
[file_list, path_n] = uigetfile(‘*.csv’, ‘Select CSV Files’, ‘Multiselect’, ‘on’);

% Check if any files were selected
if ischar(file_list)
% Convert single file string to cell array
file_list = {file_list};
end

% Initialize a cell array to store the modified tables
modifiedTables = cell(length(file_list), 1);

% Loop through each selected file
for k = 1:length(file_list)
% Construct the full file path
filePath = fullfile(path_n, file_list{k});

% Import the CSV file as a table
T = readtable(filePath);

% Check if the table has at least 37 columns
if width(T) >= 37
% Extract the ‘OrderNumber’ column (column 37) and convert it to a string array
orderNumberColumn = string(T{:, 37});

% Initialize the new column as a double array with the same size as the original column
newOrderNumberColumn = zeros(size(orderNumberColumn));

% Convert the string values to doubles
for i = 1:length(orderNumberColumn)
numValue = str2double(orderNumberColumn(i));
if isnan(numValue)
% If conversion fails (non-numeric value), set the value to 0
newOrderNumberColumn(i) = 0;
else
% Otherwise, use the numeric value
newOrderNumberColumn(i) = numValue;
end
end

% Update only the 37th column with the new double column
T.(T.Properties.VariableNames{37}) = newOrderNumberColumn;
end

% Store the modified table in the cell array
modifiedTables{k} = T;
end

% Display the number of tables processed
disp([‘Number of tables processed: ‘, num2str(length(modifiedTables))]);
Unfortunately, the other columns (for example column 35, 36,38 and 39) also become affected when importing the csv files in bulk and hence my new modified table now contains NaNs even though I would like to only modify the column 37 (see "modifiedtables").
When I import via the user interface (see "imported_by_hand") or when I use the code below(see "T") that doesnt seem to happen.
T_copy = T;

% Extract the ‘OrderNumber’ column (column 37) and convert it to a string array
orderNumberColumn = string(T_copy{:, 37});

% Initialize the new column as a double array with the same size as the original column
newOrderNumberColumn = zeros(size(orderNumberColumn));

% Convert the string values to doubles
for i = 1:length(orderNumberColumn)
numValue = str2double(orderNumberColumn(i));
if isnan(numValue)
% If conversion fails (non-numeric value), set the value to 0
newOrderNumberColumn(i) = 0;
else
% Otherwise, use the numeric value
newOrderNumberColumn(i) = numValue;
end
end

% Replace the 37th column with the new double column by creating a new table
% Get the table variable names
varNames = T_copy.Properties.VariableNames;
How can I keep this from happening when I import the data in bulk?
Thanks! I have the following code in which I want to replace the column 37 in a table. I want to swap the column of categorical values for a column of numerical values.
% Open file selection dialog and allow multiple selections
[file_list, path_n] = uigetfile(‘*.csv’, ‘Select CSV Files’, ‘Multiselect’, ‘on’);

% Check if any files were selected
if ischar(file_list)
% Convert single file string to cell array
file_list = {file_list};
end

% Initialize a cell array to store the modified tables
modifiedTables = cell(length(file_list), 1);

% Loop through each selected file
for k = 1:length(file_list)
% Construct the full file path
filePath = fullfile(path_n, file_list{k});

% Import the CSV file as a table
T = readtable(filePath);

% Check if the table has at least 37 columns
if width(T) >= 37
% Extract the ‘OrderNumber’ column (column 37) and convert it to a string array
orderNumberColumn = string(T{:, 37});

% Initialize the new column as a double array with the same size as the original column
newOrderNumberColumn = zeros(size(orderNumberColumn));

% Convert the string values to doubles
for i = 1:length(orderNumberColumn)
numValue = str2double(orderNumberColumn(i));
if isnan(numValue)
% If conversion fails (non-numeric value), set the value to 0
newOrderNumberColumn(i) = 0;
else
% Otherwise, use the numeric value
newOrderNumberColumn(i) = numValue;
end
end

% Update only the 37th column with the new double column
T.(T.Properties.VariableNames{37}) = newOrderNumberColumn;
end

% Store the modified table in the cell array
modifiedTables{k} = T;
end

% Display the number of tables processed
disp([‘Number of tables processed: ‘, num2str(length(modifiedTables))]);
Unfortunately, the other columns (for example column 35, 36,38 and 39) also become affected when importing the csv files in bulk and hence my new modified table now contains NaNs even though I would like to only modify the column 37 (see "modifiedtables").
When I import via the user interface (see "imported_by_hand") or when I use the code below(see "T") that doesnt seem to happen.
T_copy = T;

% Extract the ‘OrderNumber’ column (column 37) and convert it to a string array
orderNumberColumn = string(T_copy{:, 37});

% Initialize the new column as a double array with the same size as the original column
newOrderNumberColumn = zeros(size(orderNumberColumn));

% Convert the string values to doubles
for i = 1:length(orderNumberColumn)
numValue = str2double(orderNumberColumn(i));
if isnan(numValue)
% If conversion fails (non-numeric value), set the value to 0
newOrderNumberColumn(i) = 0;
else
% Otherwise, use the numeric value
newOrderNumberColumn(i) = numValue;
end
end

% Replace the 37th column with the new double column by creating a new table
% Get the table variable names
varNames = T_copy.Properties.VariableNames;
How can I keep this from happening when I import the data in bulk?
Thanks! categorical variable, table, convert, import MATLAB Answers — New Questions

​

I have a spectroscopy plot of two curves, one relating to wavelength and one to wave number.
Wavenumber = 1/wavelegnth, so the relation is non linear. I want to align the top x-axis with bottom x-axis so that the peaks of the two curves are displayed in line with each other. Is this possible?

This is my current code:
t = tiledlayout(1,1);
ax1 = axes(t);
plot(ax1,wl1,sol1,’-r’,’LineWidth’,3)
ax1.XAxisLocation = ‘bottom’;
ax1.YAxisLocation = ‘left’;
ax1.XColor = ‘r’;
ax1.YColor = ‘r’;
set(ax1, ‘xlim’,[300 400])
xlabel(‘wavelength (nm)’,FontSize=18)
ylabel(‘Absorption’,FontSize=18)
hold on
ax2 = axes(t);

plot(ax2,wn1,sol1_adj,’-k’,’LineWidth’,3)

set(ax2, ‘xlim’,[250000 333333])
ax2.XAxisLocation = ‘top’;
ax2.YAxisLocation = ‘right’;
ax2.Color = ‘none’;
ax1.Box = ‘off’;
ax2.Box = ‘off’;
xlabel(‘wavenumber(m^-^1)’,FontSize=18)
ylabel(‘Absorption’,FontSize=18)
set(gca, ‘XDir’,’reverse’)

ax1.FontSize = 16;
ax2.FontSize = 16;I have a spectroscopy plot of two curves, one relating to wavelength and one to wave number.
Wavenumber = 1/wavelegnth, so the relation is non linear. I want to align the top x-axis with bottom x-axis so that the peaks of the two curves are displayed in line with each other. Is this possible?

This is my current code:
t = tiledlayout(1,1);
ax1 = axes(t);
plot(ax1,wl1,sol1,’-r’,’LineWidth’,3)
ax1.XAxisLocation = ‘bottom’;
ax1.YAxisLocation = ‘left’;
ax1.XColor = ‘r’;
ax1.YColor = ‘r’;
set(ax1, ‘xlim’,[300 400])
xlabel(‘wavelength (nm)’,FontSize=18)
ylabel(‘Absorption’,FontSize=18)
hold on
ax2 = axes(t);

plot(ax2,wn1,sol1_adj,’-k’,’LineWidth’,3)

set(ax2, ‘xlim’,[250000 333333])
ax2.XAxisLocation = ‘top’;
ax2.YAxisLocation = ‘right’;
ax2.Color = ‘none’;
ax1.Box = ‘off’;
ax2.Box = ‘off’;
xlabel(‘wavenumber(m^-^1)’,FontSize=18)
ylabel(‘Absorption’,FontSize=18)
set(gca, ‘XDir’,’reverse’)

ax1.FontSize = 16;
ax2.FontSize = 16; I have a spectroscopy plot of two curves, one relating to wavelength and one to wave number.
Wavenumber = 1/wavelegnth, so the relation is non linear. I want to align the top x-axis with bottom x-axis so that the peaks of the two curves are displayed in line with each other. Is this possible?

This is my current code:
t = tiledlayout(1,1);
ax1 = axes(t);
plot(ax1,wl1,sol1,’-r’,’LineWidth’,3)
ax1.XAxisLocation = ‘bottom’;
ax1.YAxisLocation = ‘left’;
ax1.XColor = ‘r’;
ax1.YColor = ‘r’;
set(ax1, ‘xlim’,[300 400])
xlabel(‘wavelength (nm)’,FontSize=18)
ylabel(‘Absorption’,FontSize=18)
hold on
ax2 = axes(t);

plot(ax2,wn1,sol1_adj,’-k’,’LineWidth’,3)

set(ax2, ‘xlim’,[250000 333333])
ax2.XAxisLocation = ‘top’;
ax2.YAxisLocation = ‘right’;
ax2.Color = ‘none’;
ax1.Box = ‘off’;
ax2.Box = ‘off’;
xlabel(‘wavenumber(m^-^1)’,FontSize=18)
ylabel(‘Absorption’,FontSize=18)
set(gca, ‘XDir’,’reverse’)

ax1.FontSize = 16;
ax2.FontSize = 16; axis, scaling MATLAB Answers — New Questions

​

The customer is using arduinodue_gettingstarted model, he is getting an error when running the "Run To Target Hardware" choosing the Arduino Due and clicking "Deploy to Hardware." he downloaded the support package from:
https://www.mathworks.com/hardware-support/arduino.html

The call to realtime_make_rtw_hook, during the after_make hook generated the following error: 

ERROR: The build failed with the following message: "C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/include" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/blocks/sfcn/include" -I"C:/Users/dxq130330/Documents/MATLAB/untitled_rtt" -I"C:/Users/dxq130330/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014b/arduinodue/toolbox/realtime/targets/arduinodue/include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib –param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=untitled" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=156" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" -D"_RTT_SINGLE_TASKING_MODE_=" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./TimerTickScheduler.c ./arm_cortex_m_multitasking.c ./ert_main.c ./untitled.c ./untitled_data.c This application has requested the Runtime to terminate it in an unusual way. Please contact the application’s support team for more information. cs-make: *** [IPAddress.o] Error 255
The build process will terminate as a result. The build failed with the following message: "C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/include" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/blocks/sfcn/include" -I"C:/Users/dxq130330/Documents/MATLAB/untitled_rtt" -I"C:/Users/dxq130330/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014b/arduinodue/toolbox/realtime/targets/arduinodue/include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib –param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=untitled" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=156" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" -D"_RTT_SINGLE_TASKING_MODE_=" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./TimerTickScheduler.c ./arm_cortex_m_multitasking.c ./ert_main.c ./untitled.c ./untitled_data.c This application has requested the Runtime to terminate it in an unusual way. Please contact the application’s support team for more information. cs-make: *** [IPAddress.o] Error 255 Component: Simulink | Category: Block error
​The customer is using arduinodue_gettingstarted model, he is getting an error when running the "Run To Target Hardware" choosing the Arduino Due and clicking "Deploy to Hardware." he downloaded the support package from:
https://www.mathworks.com/hardware-support/arduino.html

The call to realtime_make_rtw_hook, during the after_make hook generated the following error: 

ERROR: The build failed with the following message: "C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/include" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/blocks/sfcn/include" -I"C:/Users/dxq130330/Documents/MATLAB/untitled_rtt" -I"C:/Users/dxq130330/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014b/arduinodue/toolbox/realtime/targets/arduinodue/include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib –param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=untitled" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=156" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" -D"_RTT_SINGLE_TASKING_MODE_=" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./TimerTickScheduler.c ./arm_cortex_m_multitasking.c ./ert_main.c ./untitled.c ./untitled_data.c This application has requested the Runtime to terminate it in an unusual way. Please contact the application’s support team for more information. cs-make: *** [IPAddress.o] Error 255
The build process will terminate as a result. The build failed with the following message: "C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/include" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/blocks/sfcn/include" -I"C:/Users/dxq130330/Documents/MATLAB/untitled_rtt" -I"C:/Users/dxq130330/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014b/arduinodue/toolbox/realtime/targets/arduinodue/include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib –param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=untitled" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=156" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" -D"_RTT_SINGLE_TASKING_MODE_=" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./TimerTickScheduler.c ./arm_cortex_m_multitasking.c ./ert_main.c ./untitled.c ./untitled_data.c This application has requested the Runtime to terminate it in an unusual way. Please contact the application’s support team for more information. cs-make: *** [IPAddress.o] Error 255 Component: Simulink | Category: Block error
​ The customer is using arduinodue_gettingstarted model, he is getting an error when running the "Run To Target Hardware" choosing the Arduino Due and clicking "Deploy to Hardware." he downloaded the support package from:
https://www.mathworks.com/hardware-support/arduino.html

The call to realtime_make_rtw_hook, during the after_make hook generated the following error: 

ERROR: The build failed with the following message: "C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/include" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/blocks/sfcn/include" -I"C:/Users/dxq130330/Documents/MATLAB/untitled_rtt" -I"C:/Users/dxq130330/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014b/arduinodue/toolbox/realtime/targets/arduinodue/include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib –param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=untitled" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=156" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" -D"_RTT_SINGLE_TASKING_MODE_=" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./TimerTickScheduler.c ./arm_cortex_m_multitasking.c ./ert_main.c ./untitled.c ./untitled_data.c This application has requested the Runtime to terminate it in an unusual way. Please contact the application’s support team for more information. cs-make: *** [IPAddress.o] Error 255
The build process will terminate as a result. The build failed with the following message: "C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/include" -I"C:/MATLAB/SupportPackages/R2014b/arduinobase/toolbox/realtime/targets/arduino/blocks/sfcn/include" -I"C:/Users/dxq130330/Documents/MATLAB/untitled_rtt" -I"C:/Users/dxq130330/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014b/arduinodue/toolbox/realtime/targets/arduinodue/include" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/libraries/Servo/src/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib –param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=untitled" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=156" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" -D"_RTT_SINGLE_TASKING_MODE_=" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./TimerTickScheduler.c ./arm_cortex_m_multitasking.c ./ert_main.c ./untitled.c ./untitled_data.c This application has requested the Runtime to terminate it in an unusual way. Please contact the application’s support team for more information. cs-make: *** [IPAddress.o] Error 255 Component: Simulink | Category: Block error
​ simulink, real, time, arduino MATLAB Answers — New Questions

​

By creating meshgrid, I can do contour plot.
T=linspace(0,2*pi,100);
d = linspace(0,2*pi,100) ;
[X,Y] = meshgrid(T,d);
M =(sin(Y).*sin(2.*X)) ;
contourf(X*(180/pi),Y*(180/pi),M)
But when I try to do it as
M = @(T,d)(sin(d).*sin(2.*T)) ;
fcontour(M)
I’m not able to get any graph. If anybody can explain to me how this works. Appriciate your help.By creating meshgrid, I can do contour plot.
T=linspace(0,2*pi,100);
d = linspace(0,2*pi,100) ;
[X,Y] = meshgrid(T,d);
M =(sin(Y).*sin(2.*X)) ;
contourf(X*(180/pi),Y*(180/pi),M)
But when I try to do it as
M = @(T,d)(sin(d).*sin(2.*T)) ;
fcontour(M)
I’m not able to get any graph. If anybody can explain to me how this works. Appriciate your help. By creating meshgrid, I can do contour plot.
T=linspace(0,2*pi,100);
d = linspace(0,2*pi,100) ;
[X,Y] = meshgrid(T,d);
M =(sin(Y).*sin(2.*X)) ;
contourf(X*(180/pi),Y*(180/pi),M)
But when I try to do it as
M = @(T,d)(sin(d).*sin(2.*T)) ;
fcontour(M)
I’m not able to get any graph. If anybody can explain to me how this works. Appriciate your help. contour plot, function handle MATLAB Answers — New Questions

​