Category: Microsoft
Category Archives: Microsoft
What is the best way to update actuals against MS Project Tasks?
We are currently working with PWA and Microsoft Project Professional. We conduct all of our estimates in hours and task contributors advise of progress by providing hours progress against each task. The PM then inputs this information against the task.
Our question is, which is the most efficient method to enter these ‘progress’ hours against a task:
Gantt View?Task Usage?Resource Usage?Task Sheet?
Thanks in anticipation of your support
We are currently working with PWA and Microsoft Project Professional. We conduct all of our estimates in hours and task contributors advise of progress by providing hours progress against each task. The PM then inputs this information against the task. Our question is, which is the most efficient method to enter these ‘progress’ hours against a task:Gantt View?Task Usage?Resource Usage?Task Sheet?Thanks in anticipation of your support Read More
Direct action quietly dropped
Has anyone else noticed that under MC788953 / roadmap 393937 we lose the ability to run remediations direct from Threat Explorer? Instead, the action goes to the Action Center where I have to (a) wait for it to appear, (b) find it amongst all of the automated clutter with none of the information I originally input in the Threat Explorer and (c) approve it. Is the rest of the civilised universe all on third-party tools working through the APIs?
https://www.microsoft.com/en-GB/microsoft-365/roadmap?filters=&searchterms=393937
Has anyone else noticed that under MC788953 / roadmap 393937 we lose the ability to run remediations direct from Threat Explorer? Instead, the action goes to the Action Center where I have to (a) wait for it to appear, (b) find it amongst all of the automated clutter with none of the information I originally input in the Threat Explorer and (c) approve it. Is the rest of the civilised universe all on third-party tools working through the APIs? https://www.microsoft.com/en-GB/microsoft-365/roadmap?filters=&searchterms=393937 Read More
iOS device showing only 2 days of email in Outlook Mobile App
Anyone ever deal with a new enrolled iOS device only seeing 2 days of emails? It seems like it has only happened to a handful of devices, but they are all getting the same config profile and policy.
Anyone ever deal with a new enrolled iOS device only seeing 2 days of emails? It seems like it has only happened to a handful of devices, but they are all getting the same config profile and policy. Read More
Hilarious word experience
Hello Microsoft.
I have a usb stick – and somehow the word on the usb stick, got corrupted.
Look at this :
The word document is corrupted – it brings up this error when im trying.
The paper was supposed to be printed out, and giving to the teacher.
I have tried multiple guides on how to helping it.
But it seems most of them dont work, because the word document was saved on a usb stick.
The best solutions I found was :
But thats a solution requiring to send it to him.
I have spent around 45 minutes now, because its exam paper – but i simply can not figure out how to save it.
Also the anwers to the exam is around 22 to 24 kb, so it ain’t much.
I feel like all those weird “files” is my word document split up in multiple pieces.
There are nothing I can do with those files.
If you count them together its around 28 kb – so no doubt thats the originally file splitted to a million pieces.
I also tried repairing online – but without success.
Hello Microsoft.I have a usb stick – and somehow the word on the usb stick, got corrupted.Look at this : The word document is corrupted – it brings up this error when im trying. The paper was supposed to be printed out, and giving to the teacher.I have tried multiple guides on how to helping it.But it seems most of them dont work, because the word document was saved on a usb stick. The best solutions I found was : https://answers.microsoft.com/en-us/msoffice/forum/all/corrupted-word-documents-from-editing-on-usb/6ff92864-f432-42eb-84ec-01ecbf4d048bBut thats a solution requiring to send it to him.I have spent around 45 minutes now, because its exam paper – but i simply can not figure out how to save it.Also the anwers to the exam is around 22 to 24 kb, so it ain’t much.I feel like all those weird “files” is my word document split up in multiple pieces.There are nothing I can do with those files.If you count them together its around 28 kb – so no doubt thats the originally file splitted to a million pieces.I also tried repairing online – but without success. Read More
Will the SharePoint migration assessment tool work on a windows server 2019 shared drive?
I’m migrating an on premise Fileshare to Sharepoint online. I need to run the assessment tool to see if we will run into any errors. will it work on a file share and if not what is the best way to go about it? Also, Will the migration tool migrate 1TB of data in one operation or is there a 250GB limit?
I’m migrating an on premise Fileshare to Sharepoint online. I need to run the assessment tool to see if we will run into any errors. will it work on a file share and if not what is the best way to go about it? Also, Will the migration tool migrate 1TB of data in one operation or is there a 250GB limit? Read More
Learn about Prosperi’s Microsoft 365 partner solution in Microsoft AppSource
Microsoft 365 lets you create, share, and collaborate all in one place with your favorite apps. Learn about an offer from Prosperi, a high-performing Microsoft partner on Microsoft AppSource:
Teams Ideas for Innovation: Teams Ideas streamlines innovation management, enabling organizations to launch campaigns, discover ideas, and develop them into impactful results. In today’s business environment, leveraging internal resources for innovative solutions is paramount for resilience and growth across product development, new services, and cutting-edge marketing. With customizable evaluation tools, personal skill-building features, and seamless integration with Microsoft Teams, Teams Ideas from Prosperi empowers colleagues to collaborate, develop, and innovate efficiently. Collaborate better, develop faster, and innovate smarter with Teams Ideas!
Microsoft Tech Community – Latest Blogs –Read More
Why Is My QuickBooks Database Server Manager Stopped Working
I’m encountering an issue with QuickBooks Database Server Manager; it keeps crashing. Whenever I try to open it, I get an error message saying “QuickBooks Database Server Manager stopped working.” What could be causing this problem, and how can I fix it? I’m in urgent need of a solution as it’s affecting my work productivity.
I’m encountering an issue with QuickBooks Database Server Manager; it keeps crashing. Whenever I try to open it, I get an error message saying “QuickBooks Database Server Manager stopped working.” What could be causing this problem, and how can I fix it? I’m in urgent need of a solution as it’s affecting my work productivity. Read More
Capability to connect Excel to a protected OData Feed by OAuth2.
I am working in a utility company and we have some OData Feeds (build via asp.NET Core) that we expose to the business so they can consume their data and build by their own the reports they want.
As we consider security seriously, we are protecting all our service endpoints with OAuth2 and check also if the person has or not access to the data.
One of the top feature expected from the business users is to have access to their Data in a protected way via Excel/Power BI so only authorized people can see and consume them!
In Excel and Power BI, doing this is not possible (I have opened a case for that via our services hub portal) and we need votes to increase the visibility on this feature so this can be considered by the Office365 team.
Thanks in advance.
I am working in a utility company and we have some OData Feeds (build via asp.NET Core) that we expose to the business so they can consume their data and build by their own the reports they want. As we consider security seriously, we are protecting all our service endpoints with OAuth2 and check also if the person has or not access to the data. One of the top feature expected from the business users is to have access to their Data in a protected way via Excel/Power BI so only authorized people can see and consume them! In Excel and Power BI, doing this is not possible (I have opened a case for that via our services hub portal) and we need votes to increase the visibility on this feature so this can be considered by the Office365 team. Thanks in advance. Read More
A list of the groups could not be retrieved in GroupCalendar Web Part
When i try to add a GroupCalendar Web Part to a modern Sharepoint site I only get this message:
A list of the groups could not be retrieved.
The message is translated from the German version. Sorry don’t have a English version at hand. And in the Web Part it says: “You need to join the group”
I tested different scenarios with different users. It does not wort even when I’m the owner and also a member of the Group. When I Click on the link in the WebPart it say “You already joined this group”
What am I doing worng? Did something change in the Sharepoint universe that i have missed?
We are only using Sharepoint Online, no on prem Server.
AD is synced with Azure. But for this use case with M365 Groups that should not be the problem as they are created in the Admin Center.
I am at a loss. Any help is appreciated.
Regards
When i try to add a GroupCalendar Web Part to a modern Sharepoint site I only get this message: A list of the groups could not be retrieved. The message is translated from the German version. Sorry don’t have a English version at hand. And in the Web Part it says: “You need to join the group” I tested different scenarios with different users. It does not wort even when I’m the owner and also a member of the Group. When I Click on the link in the WebPart it say “You already joined this group” What am I doing worng? Did something change in the Sharepoint universe that i have missed?We are only using Sharepoint Online, no on prem Server. AD is synced with Azure. But for this use case with M365 Groups that should not be the problem as they are created in the Admin Center. I am at a loss. Any help is appreciated.Regards Read More
Delete Version History
Hello Team,
I’m looking for help with deleting the version history of specific files in SharePoint, but retaining the last 10 versions. I can see that I can manually delete the version history, but this is going to be a rather long task for this particular file, or i can delete them all which we don’t want. I’ve found powershell commands which will go through all files in a document library but nothing for a specific file. Does anyone have anything which will do this?
Thank you.
Hello Team, I’m looking for help with deleting the version history of specific files in SharePoint, but retaining the last 10 versions. I can see that I can manually delete the version history, but this is going to be a rather long task for this particular file, or i can delete them all which we don’t want. I’ve found powershell commands which will go through all files in a document library but nothing for a specific file. Does anyone have anything which will do this? Thank you. Read More
SSIS & Azure SQL Managed Instance with MFA
We’ve been testing out Azure SQL Managed Instance and created SSIS packages to run against it. We set connections using the ADO.Net connection manager and all worked well.
We recently had to apply MFA to all logins and this is causing issues within SSIS as there is no MFA option for logins like there is in SSMS. We can connect if we use SQL Server Authentication but we’d rather not do that. When using Active Directory Integrated Authentication, all of our test connections fail and the package will not run locally. In SSMS, there is an integrated authentication with MFA option and that works from within SSMS.
How can we use SSIS and connect to the database using Windows Authentication when MFA is required?
We’ve been testing out Azure SQL Managed Instance and created SSIS packages to run against it. We set connections using the ADO.Net connection manager and all worked well.We recently had to apply MFA to all logins and this is causing issues within SSIS as there is no MFA option for logins like there is in SSMS. We can connect if we use SQL Server Authentication but we’d rather not do that. When using Active Directory Integrated Authentication, all of our test connections fail and the package will not run locally. In SSMS, there is an integrated authentication with MFA option and that works from within SSMS. How can we use SSIS and connect to the database using Windows Authentication when MFA is required? Read More
Azure subscription owners
Hi
Is there any script (Azure CLI) to get the list of owners of Azure subscription. We have a around 500 subscription. we need to get a owners of each subscription.
I’ve searched in Google but haven’t got any script to specifically to get owners list.
James
Hi Is there any script (Azure CLI) to get the list of owners of Azure subscription. We have a around 500 subscription. we need to get a owners of each subscription. I’ve searched in Google but haven’t got any script to specifically to get owners list. James Read More
Can someone explain the difference between SP web parts and extensions?
I’m in the process of revamping our company’s SharePoint; we have multiple sites, each of which has its own documents, sub pages etc. I’ve been given a design for the site, and mostly it’s achievable with the built-in functionality (just regular text etc) but a couple of parts will require Web Parts to be built, so I’ve been learning that and it seems fine so far.
However, there are a few things that might not be manageable that way, so I’ve been looking into Extensions and Templates as well, and I’m not totally clear on how they all fit together.
Specifically, what’s the difference between a Web Part and an Extension? Why would I choose one over the other? Is there a specific case where a Web Part wouldn’t do what I needed it to do, and I’d need to create an Extension? Or vice versa?
I’m also not clear on Templates and how those fit in.
For instance, I need to do the following, if possible:
> Make every site ‘Dark Mode’ by default; i.e. a dark background (preferably in a colour that I can select, because the ‘brand black’ is slightly ‘off black’).
> Add a different background for alternative sections (i.e. section 1 has the default black/off-black, then section 2 has a slightly lighter black, then section 3 has the default again and so on).
> Change the look of the menu at the top of the page (basically changing to the brand colours instead of the default purple); this should be applied to every page if possible (not the end of the world if I have to do it manually).
> Style the list of documents.
> Remove the spacing between sections.
>When a new page is created, it should have the above styles applied automatically (if possible – or at least have these styles available to select).
I know HTML/CSS and JS/React, so coding the web parts etc hasn’t been a problem; I’m just confused about how Templates fit in and on whether I can use Extensions for any of it. I’ve read the documentation, but it hasn’t really made things clearer!
I’m in the process of revamping our company’s SharePoint; we have multiple sites, each of which has its own documents, sub pages etc. I’ve been given a design for the site, and mostly it’s achievable with the built-in functionality (just regular text etc) but a couple of parts will require Web Parts to be built, so I’ve been learning that and it seems fine so far. However, there are a few things that might not be manageable that way, so I’ve been looking into Extensions and Templates as well, and I’m not totally clear on how they all fit together. Specifically, what’s the difference between a Web Part and an Extension? Why would I choose one over the other? Is there a specific case where a Web Part wouldn’t do what I needed it to do, and I’d need to create an Extension? Or vice versa? I’m also not clear on Templates and how those fit in. For instance, I need to do the following, if possible: > Make every site ‘Dark Mode’ by default; i.e. a dark background (preferably in a colour that I can select, because the ‘brand black’ is slightly ‘off black’). > Add a different background for alternative sections (i.e. section 1 has the default black/off-black, then section 2 has a slightly lighter black, then section 3 has the default again and so on). > Change the look of the menu at the top of the page (basically changing to the brand colours instead of the default purple); this should be applied to every page if possible (not the end of the world if I have to do it manually). > Style the list of documents. > Remove the spacing between sections. >When a new page is created, it should have the above styles applied automatically (if possible – or at least have these styles available to select). I know HTML/CSS and JS/React, so coding the web parts etc hasn’t been a problem; I’m just confused about how Templates fit in and on whether I can use Extensions for any of it. I’ve read the documentation, but it hasn’t really made things clearer! Read More
Device Configuration Profiles – Domain Join
Hi All,
I have a Device Configuration Profile – setup for Windows 10 and above.
The Computer name prefix is correct.
The Domain name is correct.
and the organisation OU is correct.
A group has been assigned, with just one test device in.
But the profile is showing as not applicable.
Does the enrolment profile need to be set to “Join to Microsoft Entra ID as
Microsoft Entra joined” or Microsoft Entra Hypbrid joined?
Currently set to Microsoft Entra Joined.
Our AD is on prem.
Any idea’s?
Thanks
Hi All, I have a Device Configuration Profile – setup for Windows 10 and above. The Computer name prefix is correct.The Domain name is correct.and the organisation OU is correct.A group has been assigned, with just one test device in. But the profile is showing as not applicable. Does the enrolment profile need to be set to “Join to Microsoft Entra ID asMicrosoft Entra joined” or Microsoft Entra Hypbrid joined?Currently set to Microsoft Entra Joined. Our AD is on prem.Any idea’s? Thanks Read More
What to Do When Multi-User Mode Not Working in QuickBooks
I’m encountering issues with QuickBooks’ Multi-User Mode not functioning properly. Every time I try to switch to Multi-User Mode, it fails to connect or causes errors. How can I resolve this problem effectively?
I’m encountering issues with QuickBooks’ Multi-User Mode not functioning properly. Every time I try to switch to Multi-User Mode, it fails to connect or causes errors. How can I resolve this problem effectively? Read More
Two way dynamic sum (by column and rows)
Hi,
What ie the best and easiest way to sum dynamically by both rows and columns? This sums automaticall by rows, how to expand so it does it for each column?
Best regards
Geir
Hi, What ie the best and easiest way to sum dynamically by both rows and columns? This sums automaticall by rows, how to expand so it does it for each column? Best regards Geir Read More
Move existing Sharepoint 2019 to new environment
I have a new client with a unstable SharePoint setup. It is a two tier setup, web and app on one server and the SQL on another. The SharePoint services like e.g. User profile sync and Managed metadata was setup with individual user accounts, and those individuals no longer work at the company, no one knows their passwords and SP does not allow us to change the service account to another account. (it is greyed out) Or in some scenarios when trying to register a new account, immediately throws a “Sorry something went wrong” and the security validation for the page has timed out.”
What is the best way to fix this situation? I do not want to loose the work done on their SharePoint – and EDRMS is already setup with access rights and files uploaded. But with the services not running, the site is operating inconsistently, I can not continue setting up Managed Metadata, access rights is not syncing, ect.
I was thinking of creating 2 new servers, one with a clean SharePoint installation and one with a clean SQL installation and setup the necessary sharepoint services like (Managed metadata, search, User Profile, sync) and then restore the content database from the current server to the new one
I have a new client with a unstable SharePoint setup. It is a two tier setup, web and app on one server and the SQL on another. The SharePoint services like e.g. User profile sync and Managed metadata was setup with individual user accounts, and those individuals no longer work at the company, no one knows their passwords and SP does not allow us to change the service account to another account. (it is greyed out) Or in some scenarios when trying to register a new account, immediately throws a “Sorry something went wrong” and the security validation for the page has timed out.” What is the best way to fix this situation? I do not want to loose the work done on their SharePoint – and EDRMS is already setup with access rights and files uploaded. But with the services not running, the site is operating inconsistently, I can not continue setting up Managed Metadata, access rights is not syncing, ect.I was thinking of creating 2 new servers, one with a clean SharePoint installation and one with a clean SQL installation and setup the necessary sharepoint services like (Managed metadata, search, User Profile, sync) and then restore the content database from the current server to the new one Read More
Can i get job after passing AZ-500 exam
The aim of posting this question in the community is to gather information and perspectives from individuals who have already passed the AZ-500 exam or are familiar with the Azure security job market. Understanding the job market demand for Azure security professionals and the perceived value of the AZ-500 certification can help me make informed decisions about my career path and prioritize my certification goals effectively.
The aim of posting this question in the community is to gather information and perspectives from individuals who have already passed the AZ-500 exam or are familiar with the Azure security job market. Understanding the job market demand for Azure security professionals and the perceived value of the AZ-500 certification can help me make informed decisions about my career path and prioritize my certification goals effectively. Read More
How can I enable BitLocker on my data drive?
I wish to encrypt my data drive with BitLocker (D:) in order to prevent data leak. However, I don’t find the option from the Settings panel. I am running Windows 11 Home.
Thanks
I wish to encrypt my data drive with BitLocker (D:) in order to prevent data leak. However, I don’t find the option from the Settings panel. I am running Windows 11 Home. Thanks Read More
B I T G E T código de referidos para 2024: qp29
¿Está buscando un código de referidos de B I T G E T? El último para 2024 es qp29. Con este código obtienes un 30% de descuento. Además, los nuevos usuarios de B I T G E T que se registren con el código de promoción “qp29” pueden recibir una recompensa promocional exclusiva por valor de hasta $1000. ¿Cuál es el código de referidos de B I T G E T? El código “qp29” en el programa de referidos de B I T G E T actúa como código de referidos. Al ingresar este código, recibirá una reducción permanente en las tarifas comerciales, así como un 30 % de descuento en sus operaciones. Además, si comparte su código de referidos con sus amigos, tiene la posibilidad de ganar un generoso bono del 50 %. El uso de este código brinda una valiosa oportunidad para reducir las tarifas y potencialmente aumentar sus ganancias al atraer a otros a la plataforma. ¿Cuál es el mejor código de referidos de B I T G E T 2024? El código de referidos de B I T G E T altamente recomendado es qp29. Si utiliza este código al registrarse, recibirá un generoso bono de $100. Si compartes tu código con tus amigos, tienes la oportunidad de ganar una enorme comisión del 50%. Básicamente, esto le brinda la oportunidad de recibir un bono de registro máximo de hasta $1,000 como recompensa de bienvenida. Esta es una excelente manera de ampliar su experiencia comercial con beneficios adicionales y al mismo tiempo animar a otros a unirse y ganar sus propias recompensas. Cómo utilizar el código de referidos de B I T G E T El código de referidos de B I T G E T está disponible para nuevos usuarios que aún no se han registrado en el intercambio. Lamentablemente, si ya tiene una cuenta, no podrá utilizar el código de referidos. Sin embargo, B I T G E T ofrece otras formas de participar en promociones y ganar recompensas. Veamos estas alternativas. Para los novatos de B I T G E T, aquí hay una guía paso a paso sobre cómo solicitar un código de referidos: Para comenzar, visite B I T G E T y haga clic en el botón azul “Registrarse”. Proporcione detalles precisos del usuario, ya que se verificará que cumplan con los procedimientos KYC y AML. Cuando se le solicite su código de referidos, ingrese qp29. Complete el proceso de registro y complete las verificaciones requeridas. Una vez que se cumplan todas las condiciones, podrá recibir inmediatamente el bono de bienvenida. Este enfoque garantiza que los nuevos usuarios puedan completar fácilmente el proceso de registro incluso sin un código de referidos y recibir un bono de bienvenida después de cumplir con los requisitos establecidos. ¿Cuál es el código de referidos recomendado para B I T G E T? Código de referidos B I T G E T – qp29. Para obtener un 30% de descuento en tu comisión B I T G E T, simplemente sigue estos pasos: Registre una nueva cuenta en B I T G E T. Asegúrese de utilizar el código de referidos B I T G E T qp29. ¿A cuánto asciende el bono por recomendación de B I T G E T? ¡Invita a tus amigos a unirse a B I T G E T y ganen juntos una parte del premio acumulado por referencias! Cada amigo que recomiendes puede ganar $50, hasta un máximo de $1,000 por usuario. Los usuarios pueden invitar a amigos a registrarse en B I T G E T. Si cumplen con todos los requisitos, usted y sus amigos recibirán bonos comerciales de $50 hasta el límite máximo. ¿Cómo obtengo el bono B I T G E T? Gana puntos diariamente y cámbialos por USDT. Completa el desafío en siete días para desbloquear todas las recompensas. Regístrese para recibir un paquete de bienvenida valorado en $1,000. Deposite al menos $50 para ganar 200 puntos. Realice su primera operación por un valor de al menos $50 y gane 500 puntos. ¿Se aplican automáticamente los descuentos en las comisiones comerciales? Absolutamente. Una vez que se registre con nuestro código de referidos exclusivo B I T G E T qp29, el descuento del 30% se aplicará automáticamente. No se requiere ninguna acción adicional. Simplemente sumérjase en el trading y benefíciese de un descuento permanente del 30% en todas las comisiones.
¿Está buscando un código de referidos de B I T G E T? El último para 2024 es qp29. Con este código obtienes un 30% de descuento. Además, los nuevos usuarios de B I T G E T que se registren con el código de promoción “qp29” pueden recibir una recompensa promocional exclusiva por valor de hasta $1000. ¿Cuál es el código de referidos de B I T G E T? El código “qp29” en el programa de referidos de B I T G E T actúa como código de referidos. Al ingresar este código, recibirá una reducción permanente en las tarifas comerciales, así como un 30 % de descuento en sus operaciones. Además, si comparte su código de referidos con sus amigos, tiene la posibilidad de ganar un generoso bono del 50 %. El uso de este código brinda una valiosa oportunidad para reducir las tarifas y potencialmente aumentar sus ganancias al atraer a otros a la plataforma. ¿Cuál es el mejor código de referidos de B I T G E T 2024? El código de referidos de B I T G E T altamente recomendado es qp29. Si utiliza este código al registrarse, recibirá un generoso bono de $100. Si compartes tu código con tus amigos, tienes la oportunidad de ganar una enorme comisión del 50%. Básicamente, esto le brinda la oportunidad de recibir un bono de registro máximo de hasta $1,000 como recompensa de bienvenida. Esta es una excelente manera de ampliar su experiencia comercial con beneficios adicionales y al mismo tiempo animar a otros a unirse y ganar sus propias recompensas. Cómo utilizar el código de referidos de B I T G E T El código de referidos de B I T G E T está disponible para nuevos usuarios que aún no se han registrado en el intercambio. Lamentablemente, si ya tiene una cuenta, no podrá utilizar el código de referidos. Sin embargo, B I T G E T ofrece otras formas de participar en promociones y ganar recompensas. Veamos estas alternativas. Para los novatos de B I T G E T, aquí hay una guía paso a paso sobre cómo solicitar un código de referidos: Para comenzar, visite B I T G E T y haga clic en el botón azul “Registrarse”. Proporcione detalles precisos del usuario, ya que se verificará que cumplan con los procedimientos KYC y AML. Cuando se le solicite su código de referidos, ingrese qp29. Complete el proceso de registro y complete las verificaciones requeridas. Una vez que se cumplan todas las condiciones, podrá recibir inmediatamente el bono de bienvenida. Este enfoque garantiza que los nuevos usuarios puedan completar fácilmente el proceso de registro incluso sin un código de referidos y recibir un bono de bienvenida después de cumplir con los requisitos establecidos. ¿Cuál es el código de referidos recomendado para B I T G E T? Código de referidos B I T G E T – qp29. Para obtener un 30% de descuento en tu comisión B I T G E T, simplemente sigue estos pasos: Registre una nueva cuenta en B I T G E T. Asegúrese de utilizar el código de referidos B I T G E T qp29. ¿A cuánto asciende el bono por recomendación de B I T G E T? ¡Invita a tus amigos a unirse a B I T G E T y ganen juntos una parte del premio acumulado por referencias! Cada amigo que recomiendes puede ganar $50, hasta un máximo de $1,000 por usuario. Los usuarios pueden invitar a amigos a registrarse en B I T G E T. Si cumplen con todos los requisitos, usted y sus amigos recibirán bonos comerciales de $50 hasta el límite máximo. ¿Cómo obtengo el bono B I T G E T? Gana puntos diariamente y cámbialos por USDT. Completa el desafío en siete días para desbloquear todas las recompensas. Regístrese para recibir un paquete de bienvenida valorado en $1,000. Deposite al menos $50 para ganar 200 puntos. Realice su primera operación por un valor de al menos $50 y gane 500 puntos. ¿Se aplican automáticamente los descuentos en las comisiones comerciales? Absolutamente. Una vez que se registre con nuestro código de referidos exclusivo B I T G E T qp29, el descuento del 30% se aplicará automáticamente. No se requiere ninguna acción adicional. Simplemente sumérjase en el trading y benefíciese de un descuento permanente del 30% en todas las comisiones. Read More