Category: Microsoft
Category Archives: Microsoft
Kerberos Issues Windows Server 2016
Hi team,
I have been working on a Kerberos issue, Event ID 4 for a little over 2 months now. I have gone through all of the articles that I have found via Google and have the problem down to communications between two servers that I just cannot get to play nice. We have 3 locations on three separate islands in Hawaii. I have all three locations connected via Sonicwall Site-to-Site VPN. DNS is confirmed working. All three sites have DC present and syncronizing AD across the VPN. I have a site on Kauai that is the target server in the log files I will post and a site on Maui which is the client in the logs. I can run klist ticket on the Kauai server but when I run Klist on the Maui server, I get only the following:
C:Usersadministrator.MYDOMAIN>klist
Credentials cache C:Usersadministrator.MYDOMAINkrb5cc_administrator not found.
When I run klist ticket, I get the following:
C:Usersadministrator.MYDOMAIN>klist ticket
Usage: klist [[-c] [-f] [-e] [-a [-n]]] [-k [-t] [-K]] [name]
name name of credentials cache or keytab with the prefix. File-based cache or keytab’s prefix is FILE:.
-c specifies that credential cache is to be listed
-k specifies that key tab is to be listed
options for credentials caches:
-f shows credentials flags
-e shows the encryption type
-a shows addresses
-n do not reverse-resolve addresses
options for keytabs:
-t shows keytab entry timestamps
-K shows keytab entry key value
-e shows keytab entry key type
The Event Logs are littered with these errors:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server eskimo-server09$. The target name used was E3514235-4B06-11D1-AB04-00C04FC2DCD2/1e6f523a-ac4d-4045-a2fc-4fab4d338d6e/MYDOMAIN@MYDOMAIN This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the same password. If the server name is not fully qualified, and the target domain (MYDOMAIN) is different from the client domain (MYDOMAIN), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
From the client server on Maui I have run setspn -D E3514235-4B06-11D1-AB04-00C04FC2DCD2/1e6f523a-ac4d-4045-a2fc-4fab4d338d6e/MYDOMAIN@MYDOMAIN KauaiServer$
And re-registered it with setspn -S E3514235-4B06-11D1-AB04-00C04FC2DCD2/1e6f523a-ac4d-4045-a2fc-4fab4d338d6e/MYDOMAIN@MYDOMAIN KauaiServer$
I have queried for duplicate SPN’s in the domain and there aren’t any listed. In fact, after deleting the record and querying the domain for the record, the client server reports that NO SUCH SPN Found.
So I have two issues that I am trying to solve.
1) klist.exe seems to not be working on the client server
2) The Error Event ID 4 on the client with the Kauai Server.
Thanks for any help you can provide.
Hi team, I have been working on a Kerberos issue, Event ID 4 for a little over 2 months now. I have gone through all of the articles that I have found via Google and have the problem down to communications between two servers that I just cannot get to play nice. We have 3 locations on three separate islands in Hawaii. I have all three locations connected via Sonicwall Site-to-Site VPN. DNS is confirmed working. All three sites have DC present and syncronizing AD across the VPN. I have a site on Kauai that is the target server in the log files I will post and a site on Maui which is the client in the logs. I can run klist ticket on the Kauai server but when I run Klist on the Maui server, I get only the following:C:Usersadministrator.MYDOMAIN>klistCredentials cache C:Usersadministrator.MYDOMAINkrb5cc_administrator not found. When I run klist ticket, I get the following:C:Usersadministrator.MYDOMAIN>klist ticketUsage: klist [[-c] [-f] [-e] [-a [-n]]] [-k [-t] [-K]] [name]name name of credentials cache or keytab with the prefix. File-based cache or keytab’s prefix is FILE:.-c specifies that credential cache is to be listed-k specifies that key tab is to be listedoptions for credentials caches:-f shows credentials flags-e shows the encryption type-a shows addresses-n do not reverse-resolve addressesoptions for keytabs:-t shows keytab entry timestamps-K shows keytab entry key value-e shows keytab entry key typeThe Event Logs are littered with these errors:The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server eskimo-server09$. The target name used was E3514235-4B06-11D1-AB04-00C04FC2DCD2/1e6f523a-ac4d-4045-a2fc-4fab4d338d6e/MYDOMAIN@MYDOMAIN This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the same password. If the server name is not fully qualified, and the target domain (MYDOMAIN) is different from the client domain (MYDOMAIN), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.From the client server on Maui I have run setspn -D E3514235-4B06-11D1-AB04-00C04FC2DCD2/1e6f523a-ac4d-4045-a2fc-4fab4d338d6e/MYDOMAIN@MYDOMAIN KauaiServer$And re-registered it with setspn -S E3514235-4B06-11D1-AB04-00C04FC2DCD2/1e6f523a-ac4d-4045-a2fc-4fab4d338d6e/MYDOMAIN@MYDOMAIN KauaiServer$ I have queried for duplicate SPN’s in the domain and there aren’t any listed. In fact, after deleting the record and querying the domain for the record, the client server reports that NO SUCH SPN Found. So I have two issues that I am trying to solve. 1) klist.exe seems to not be working on the client server2) The Error Event ID 4 on the client with the Kauai Server.Thanks for any help you can provide. Read More
My Tenant is the Victim of a Persistent Email Spoofer
Hi all, for 5 days now a specific user in my tenant has been the target of a mass email spoofing attack. This users email address has been spoofed, and now we’re absolutely flooded with “Undelivered Mail Returned to Sender” bounce back emails. The attacker is impersonating this user by editing their headers to make the email appear to be coming from us. The attacker is sending a purchase order number out trying to collect payment.
I have confirmed that the affected user’s email is not sending out anything, and that the tenant as a whole is not sending out malicious emails.
Most of these emails are being originated from the same domain: “ns1.ezginplc.co”. I have already reported this domain to the FBI, but obviously there is nothing they can really do.
On my end, being the only admin for a small 8 person company, I have added a rule to simply drop these emails from ever being delivered from this domain. Unfortunately, not every email the attacker is sending is from this domain, and some items get through and get quarantined, have to be deleted form the users inbox, or worse and they make it through and annoy the living hell out of the user.
I was hoping that this attacker would move on, but they have been at this for a week and are sending upwards of 4 thousand emails a day.
What is there that I can actually do about this? Further, why is email so easy to impersonate and commit crime with, and why isn’t a solution being developed from big tech?
Hi all, for 5 days now a specific user in my tenant has been the target of a mass email spoofing attack. This users email address has been spoofed, and now we’re absolutely flooded with “Undelivered Mail Returned to Sender” bounce back emails. The attacker is impersonating this user by editing their headers to make the email appear to be coming from us. The attacker is sending a purchase order number out trying to collect payment. I have confirmed that the affected user’s email is not sending out anything, and that the tenant as a whole is not sending out malicious emails. Most of these emails are being originated from the same domain: “ns1.ezginplc.co”. I have already reported this domain to the FBI, but obviously there is nothing they can really do. On my end, being the only admin for a small 8 person company, I have added a rule to simply drop these emails from ever being delivered from this domain. Unfortunately, not every email the attacker is sending is from this domain, and some items get through and get quarantined, have to be deleted form the users inbox, or worse and they make it through and annoy the living hell out of the user. I was hoping that this attacker would move on, but they have been at this for a week and are sending upwards of 4 thousand emails a day. What is there that I can actually do about this? Further, why is email so easy to impersonate and commit crime with, and why isn’t a solution being developed from big tech? Read More
How can I convert PDF to Word document on Mac?
I’m seeking advice on how to convert PDF files to Word documents on a Mac. As I sometimes use my Mac more often than my Windows 11 PC, I often need to edit the content of PDF documents for work but struggle to find a reliable way to convert them while preserving the formatting, such as text alignment, images, and tables. Most of the solutions I’ve tried either mess up the layout or miss some elements. Does anyone have recommendations for software or methods that work well for this on macOS? I would appreciate any tips or guidance on how to handle this efficiently. Thanks in advance!
I’m seeking advice on how to convert PDF files to Word documents on a Mac. As I sometimes use my Mac more often than my Windows 11 PC, I often need to edit the content of PDF documents for work but struggle to find a reliable way to convert them while preserving the formatting, such as text alignment, images, and tables. Most of the solutions I’ve tried either mess up the layout or miss some elements. Does anyone have recommendations for software or methods that work well for this on macOS? I would appreciate any tips or guidance on how to handle this efficiently. Thanks in advance! Read More
Recuperar email
Meu email foi rackeado e hoje tento entrar e eswuecer a senha diz que meu email nao existe, uso esse email a anos preciso recuperar algume me ajuda
email address removed for privacy reasons
Meu email foi rackeado e hoje tento entrar e eswuecer a senha diz que meu email nao existe, uso esse email a anos preciso recuperar algume me ajudaemail address removed for privacy reasons Read More
The new version of edge smil is invalid for the fePointLight attributes x and y, but z is valid.
The new version of edge smil is invalid for the fePointLight attributes x and y, but z is valid. Everything is normal in version 1518.
The new version of edge smil is invalid for the fePointLight attributes x and y, but z is valid. Everything is normal in version 1518. Read More
Too much to ask?!
Help me simply to Leave oneDrive alone, making the only way to update the cloud is it manually do it.
***PROBLEM***
Stopped the start-up, and I have the “leave file file on computer” but when I organize, oneDrive, from the taskbar, asks the ridiculously ambiguous message: “keep files in folder or delete” (recycling bin). I send it to recycling bin just to take it back out again. I just want my files to be left alone, now. I want it to stop asking me questions about things I’ve uploaded and moved.
Also, is it me, or do I have to log into Windows 3 times in the span of 5 minutes just to create this post. I wish that’ll sync as much as oneDrive.
Help me simply to Leave oneDrive alone, making the only way to update the cloud is it manually do it. ***PROBLEM***Stopped the start-up, and I have the “leave file file on computer” but when I organize, oneDrive, from the taskbar, asks the ridiculously ambiguous message: “keep files in folder or delete” (recycling bin). I send it to recycling bin just to take it back out again. I just want my files to be left alone, now. I want it to stop asking me questions about things I’ve uploaded and moved. Also, is it me, or do I have to log into Windows 3 times in the span of 5 minutes just to create this post. I wish that’ll sync as much as oneDrive. Read More
windows explorer performance issues with large files: need help!
I’m experiencing significant performence issues with windows explorer when accessing folders that contain large files. The folder takes a long time to load details of files, and the “Calcul des filtres…” message appears for an extended period, making it difficult to manage my files efficiently.
I’ve already tried several solutions, such as disabling thumbails, optimizing the folder for general items, and increasing virtual memory, but the problem persists. I’m attaching a screenshot that shows the issue in detail. I also tried some thrid-party file manager like total commander, directory opus and xyplorer; but apparently all of them did not even have the feature to disply the detail of files as the windows explorer do as shown in the screenshot attached.
Does anyone have any suggestions or advanced troubleshooting steps that could help resolve this problem? your assistance would be greatly appreciate!
P.S:
Nom de l’appareil DESKTOP-S1OLLOC
Processeur Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz 2.50 GHz
Mémoire RAM installée 8,00 Go (7,89 Go utilisable)
ID de périphérique 7188AD74-922E-46CE-ABCB-C1E9E343DC37
ID de produit 00331-20090-00000-AA371
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
Édition Windows 10 Professionnel
Version 22H2
Installé le 13/05/2023
Build du système d’exploitation 19045.2965
Expérience Windows Feature Experience Pack 1000.19041.1000.0
I’m experiencing significant performence issues with windows explorer when accessing folders that contain large files. The folder takes a long time to load details of files, and the “Calcul des filtres…” message appears for an extended period, making it difficult to manage my files efficiently.I’ve already tried several solutions, such as disabling thumbails, optimizing the folder for general items, and increasing virtual memory, but the problem persists. I’m attaching a screenshot that shows the issue in detail. I also tried some thrid-party file manager like total commander, directory opus and xyplorer; but apparently all of them did not even have the feature to disply the detail of files as the windows explorer do as shown in the screenshot attached.Does anyone have any suggestions or advanced troubleshooting steps that could help resolve this problem? your assistance would be greatly appreciate!P.S:Nom de l’appareil DESKTOP-S1OLLOCProcesseur Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz 2.50 GHzMémoire RAM installée 8,00 Go (7,89 Go utilisable)ID de périphérique 7188AD74-922E-46CE-ABCB-C1E9E343DC37ID de produit 00331-20090-00000-AA371Type du système Système d’exploitation 64 bits, processeur x64Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écranÉdition Windows 10 ProfessionnelVersion 22H2Installé le 13/05/2023Build du système d’exploitation 19045.2965Expérience Windows Feature Experience Pack 1000.19041.1000.0 Read More
Adding the senders From address to a Global Disclaimer or similar header or footer for External Emai
I have no problem adding a global text disclaimer for external emails. Since the Reply To and the Mail From are very often inconsistent with Spam and Phishing emails I would like to include the From address so users can compare that address with the visible Reply address. Especially for the clearly wrong domains frequently listed for the stated sender. Is there a way to do this in Exchange 365?
CoPilot provided this Powershell as an answer:
New-TransportRule -Name “Add Sender Email to FooterMicrosoft 365 admin center” -FromScope “NotInOrganization” -ApplyHtmlDisclaimerText “This email is from an external sender (%%SenderAddress%%). Please verify its authenticity.” -ApplyHtmlDisclaimerFallbackAction “Wrap” -Mode Enforce
This results in the error below with and without the () around the variable:
Write-ErrorMessage : |System.ArgumentException|The disclaimer text contains an invalid macro name: ‘SenderAddress’.
I have had this function in 3rd Party spam blocking systems. It seems like something that could be done natively in Exchange 365. Thank you for your time in looking at my question.
I have no problem adding a global text disclaimer for external emails. Since the Reply To and the Mail From are very often inconsistent with Spam and Phishing emails I would like to include the From address so users can compare that address with the visible Reply address. Especially for the clearly wrong domains frequently listed for the stated sender. Is there a way to do this in Exchange 365? CoPilot provided this Powershell as an answer: New-TransportRule -Name “Add Sender Email to FooterMicrosoft 365 admin center” -FromScope “NotInOrganization” -ApplyHtmlDisclaimerText “This email is from an external sender (%%SenderAddress%%). Please verify its authenticity.” -ApplyHtmlDisclaimerFallbackAction “Wrap” -Mode EnforceThis results in the error below with and without the () around the variable:Write-ErrorMessage : |System.ArgumentException|The disclaimer text contains an invalid macro name: ‘SenderAddress’.I have had this function in 3rd Party spam blocking systems. It seems like something that could be done natively in Exchange 365. Thank you for your time in looking at my question. Read More
Help with a Formula
I’m trying to input deductions for a length according to which heading style and which track we will be using. Line 4 is trying to do the calculations accordingly as the track is column L – King Track, the heading is column B – Double Pinch Pleat and it is Face Fit.
The length is in this instance 2300. The deductions for Face Fix is 0, so the outcome should be 2300.
Screen Shot attached with the static data and the required allowances for each scenario.
I’m not sure if this is possible as there seems to be a lot of values required.
Thank you in advance. I do hope for an answer.
I’m trying to input deductions for a length according to which heading style and which track we will be using. Line 4 is trying to do the calculations accordingly as the track is column L – King Track, the heading is column B – Double Pinch Pleat and it is Face Fit.The length is in this instance 2300. The deductions for Face Fix is 0, so the outcome should be 2300.Screen Shot attached with the static data and the required allowances for each scenario.I’m not sure if this is possible as there seems to be a lot of values required. Thank you in advance. I do hope for an answer. Read More
SharePoint List Calculation
Hello, I am looking for assistance please. I have a sharepoint list for reimbursements. Once the data comes through to my list I then manually select the date when I process the refund. I am trying to create another column that highlights the reimbursement obligation once processed (0-3 months = 100%, 4-7 months = 75%, 8-12 months = 25% and after 12 months = 0%). How can I do one column to show the repayment obligation percentage based on the time it was processed and then a separate column to show to calculations and sum from what is owed. E.g. $800 was processed as a refund on 30th January 2024 so the Reimbursement Obligation will show it is in the 4-7 month (75%) category and then automatically calculate that the repayment amount at this stage is $600. These percentages and amounts will change as time passes until eventually they will owe $0 after 12 months. How do I do this? Thank you!
Hello, I am looking for assistance please. I have a sharepoint list for reimbursements. Once the data comes through to my list I then manually select the date when I process the refund. I am trying to create another column that highlights the reimbursement obligation once processed (0-3 months = 100%, 4-7 months = 75%, 8-12 months = 25% and after 12 months = 0%). How can I do one column to show the repayment obligation percentage based on the time it was processed and then a separate column to show to calculations and sum from what is owed. E.g. $800 was processed as a refund on 30th January 2024 so the Reimbursement Obligation will show it is in the 4-7 month (75%) category and then automatically calculate that the repayment amount at this stage is $600. These percentages and amounts will change as time passes until eventually they will owe $0 after 12 months. How do I do this? Thank you! Read More
How do I turn off Active Directory synchronization on a destroyed 2102 server? Then it will allow me
I have throughly searched the web and Microsoft site and forums however I cannot find a clear or concise answer. The only direction I did receive from another forum operator suggested this forum for help using Azure AD.
I have had the 2012 server connect to onsite AD synch and it was working great. Nice tool and option. However my server 2012 has been destroyed after it being in place for many, many years. My Office 365 domain is and has been with some sub domains pc2fix.com. So if you don’t have the physical server anymore how can I make this complicatedly simple change online? I have looked through all of my office 365 admin settings and I found no way of completing this. I get there may be security verifications and since I am the actual owner of that Office 365 account (fullly Provable/Verification) and domain on GoDaddy I will do whatever to prove I own that main and all sub domains. Please help me complete this change.
If I could just only access the server I would just log in and turn off sync tool…. sorry venting kinda frustrated, not at Microsoft. I am frustrated at the situation I got into…. You all know this if you’ve been in IT for anytime. LOL
Thanks in advance for helping this struggling individual.
I have throughly searched the web and Microsoft site and forums however I cannot find a clear or concise answer. The only direction I did receive from another forum operator suggested this forum for help using Azure AD.I have had the 2012 server connect to onsite AD synch and it was working great. Nice tool and option. However my server 2012 has been destroyed after it being in place for many, many years. My Office 365 domain is and has been with some sub domains pc2fix.com. So if you don’t have the physical server anymore how can I make this complicatedly simple change online? I have looked through all of my office 365 admin settings and I found no way of completing this. I get there may be security verifications and since I am the actual owner of that Office 365 account (fullly Provable/Verification) and domain on GoDaddy I will do whatever to prove I own that main and all sub domains. Please help me complete this change. If I could just only access the server I would just log in and turn off sync tool…. sorry venting kinda frustrated, not at Microsoft. I am frustrated at the situation I got into…. You all know this if you’ve been in IT for anytime. LOL Thanks in advance for helping this struggling individual. Read More
New Edge version 125, DevTools – Application tab make browser crash
Just updated to the new 125 version, doing my normal development work, opened the developer tools, went to “Application” tab, then the Edge browser crashed.
Rollback to version 124.0.2478.109, the browser is not crashing anymore.
Just updated to the new 125 version, doing my normal development work, opened the developer tools, went to “Application” tab, then the Edge browser crashed. Rollback to version 124.0.2478.109, the browser is not crashing anymore. Read More
ASR – Not seeing all the VMs in the ASR portal
I have set up Azure Site Recovery (ASR) to protect some on premise VMware VMs. The ASR appliance has an account in vCenter with the correct permissions.
In the Azure portal, when I go to select the VMs to protect, I only see 7 of the 78 VMs.
Any ideas on what is preventing the ASR appliance from seeing the complete VM inventory (Windows and Linux VMs).
Thanks
Ken
I have set up Azure Site Recovery (ASR) to protect some on premise VMware VMs. The ASR appliance has an account in vCenter with the correct permissions. In the Azure portal, when I go to select the VMs to protect, I only see 7 of the 78 VMs. Any ideas on what is preventing the ASR appliance from seeing the complete VM inventory (Windows and Linux VMs). Thanks Ken Read More
Outlook Send Button Moved
It looks like Outlook automagically downloaded.
Why on earth would you move the send and close buttons around? Now when I go to the top of the window to double click the send button Outlook then tries to close. You moved the outlook icon over to where the send button was. How would you like it if someone came to your desk and moved around the keys of your keyboard? How about it they changed the spacing between the keys so you would have to relearn it. You somehow think changing the spacing on the UI is something you should force on us.
What happened to the Microsoft that was backwards compatible, that didn’t force things down its users, that didn’t act like Apple? When did Microsoft start knowing better than the users it supplies? If I want new software I will buy it or ask for it.
It looks like Outlook automagically downloaded. Why on earth would you move the send and close buttons around? Now when I go to the top of the window to double click the send button Outlook then tries to close. You moved the outlook icon over to where the send button was. How would you like it if someone came to your desk and moved around the keys of your keyboard? How about it they changed the spacing between the keys so you would have to relearn it. You somehow think changing the spacing on the UI is something you should force on us. What happened to the Microsoft that was backwards compatible, that didn’t force things down its users, that didn’t act like Apple? When did Microsoft start knowing better than the users it supplies? If I want new software I will buy it or ask for it. Read More
Acessing TO DO inside new Outlook
When i access TODO inside new outlook the hashtags ( #) i have created for my tasks are useless.
However they work fine in the windows TODO app.
Can you check this
Regards
When i access TODO inside new outlook the hashtags ( #) i have created for my tasks are useless.However they work fine in the windows TODO app. Can you check thisRegards Read More
Edge will not start
Hello
I’m on Windows 10 pro 64. 22H2
Today on starting, Edge asked for my MS acount to continue (never did that before); when I basically chose not right now, it crashed and refuses to start.
When I click on the icon nothing happens; there is no app or processes
on background, no error message nothing. I’ve tried repairing it, uninstall, delete the files on the prgram filesmicrosoft folder and then reinstaling. Also deleted folders in the userappdata folder. Nothing works, clicking the icon to start simply does nothing, no processes show in the task manager
Also found that, if I switch users on the PC, Edge works. It’s only on
my user that it won’t start.
Anyone ever seen this?
HelloI’m on Windows 10 pro 64. 22H2Today on starting, Edge asked for my MS acount to continue (never did that before); when I basically chose not right now, it crashed and refuses to start.When I click on the icon nothing happens; there is no app or processeson background, no error message nothing. I’ve tried repairing it, uninstall, delete the files on the prgram filesmicrosoft folder and then reinstaling. Also deleted folders in the userappdata folder. Nothing works, clicking the icon to start simply does nothing, no processes show in the task managerAlso found that, if I switch users on the PC, Edge works. It’s only onmy user that it won’t start.Anyone ever seen this? Read More
How does Azure empower organizations to build holistic cloud defense strategies?
The threat landscape is ever-changing, and organizations are increasingly turning to Azure security services to build robust defense strategies for their cloud deployments. Here’s how Azure empowers a holistic approach:
Multi-Layered Protection:
Built-in Security: Azure offers a secure foundation by default. From Microsoft-managed data centers to security integrated into hardware and firmware, Azure safeguards your cloud infrastructure.Advanced Threat Intelligence: Azure Security Center leverages Microsoft’s vast cybersecurity expertise, providing real-time threat insights and proactive recommendations to stay ahead of evolving attacks.
Unified Threat Management:
Centralized Visibility: Azure Monitor offers a single pane of glass to view security posture across your entire cloud environment. You gain insights into potential vulnerabilities and can prioritize remediation efforts.Integrated Security Services: Azure provides a comprehensive suite of security services that work together seamlessly. Azure Firewall filters traffic, Azure Key Vault secures credentials, and Azure Security Center orchestrates the overall defense.
Holistic Defense Across Hybrid Environments:
Consistent Security Policies: Azure enforces consistent security policies across your cloud and on-premises deployments, ensuring a unified defense regardless of location.Workload Protection: Azure Security Center extends its protection to your on-premises workloads, providing a holistic view of your security posture across your entire IT infrastructure.
Empowering Your Security Team:
Automated Threat Detection & Response: Azure automates many security tasks, freeing up your team to focus on strategic initiatives and incident response.Simplified Security Management: Azure’s intuitive security tools empower your team to easily manage and monitor your cloud security posture.
By leveraging Azure’s comprehensive security services, organizations can create a holistic defense strategy that safeguards their cloud deployments from evolving threats.
The threat landscape is ever-changing, and organizations are increasingly turning to Azure security services to build robust defense strategies for their cloud deployments. Here’s how Azure empowers a holistic approach: Multi-Layered Protection:Built-in Security: Azure offers a secure foundation by default. From Microsoft-managed data centers to security integrated into hardware and firmware, Azure safeguards your cloud infrastructure.Advanced Threat Intelligence: Azure Security Center leverages Microsoft’s vast cybersecurity expertise, providing real-time threat insights and proactive recommendations to stay ahead of evolving attacks.Unified Threat Management:Centralized Visibility: Azure Monitor offers a single pane of glass to view security posture across your entire cloud environment. You gain insights into potential vulnerabilities and can prioritize remediation efforts.Integrated Security Services: Azure provides a comprehensive suite of security services that work together seamlessly. Azure Firewall filters traffic, Azure Key Vault secures credentials, and Azure Security Center orchestrates the overall defense.Holistic Defense Across Hybrid Environments:Consistent Security Policies: Azure enforces consistent security policies across your cloud and on-premises deployments, ensuring a unified defense regardless of location.Workload Protection: Azure Security Center extends its protection to your on-premises workloads, providing a holistic view of your security posture across your entire IT infrastructure.Empowering Your Security Team:Automated Threat Detection & Response: Azure automates many security tasks, freeing up your team to focus on strategic initiatives and incident response.Simplified Security Management: Azure’s intuitive security tools empower your team to easily manage and monitor your cloud security posture.By leveraging Azure’s comprehensive security services, organizations can create a holistic defense strategy that safeguards their cloud deployments from evolving threats. Read More
Task Manager Windows 11
Hello
Since the start of Windows 11, when we open the Task Manager, there is a lag (time lapse) before the processes is displayed correctly (same with 24h2)
With Windows 10, there is no lag, everything is displayed immediately
It’s just that Windows 11 is less “efficient” (badly coded, “heavier” to load or otherwise) ?
Hello Since the start of Windows 11, when we open the Task Manager, there is a lag (time lapse) before the processes is displayed correctly (same with 24h2)With Windows 10, there is no lag, everything is displayed immediatelyIt’s just that Windows 11 is less “efficient” (badly coded, “heavier” to load or otherwise) ? Read More
Lambda
I used this Lambda function:
“=LAMBDA(range,IFERROR(TOCOL(FILTER(‘3 times’!K3:CL3,(range=3))),””))(K4:CL4)” and it worked perfectly.
I then inserted it into name manger, created a name and it fails to work. It seems to input the wrong cell references?
I used this Lambda function:”=LAMBDA(range,IFERROR(TOCOL(FILTER(‘3 times’!K3:CL3,(range=3))),””))(K4:CL4)” and it worked perfectly.I then inserted it into name manger, created a name and it fails to work. It seems to input the wrong cell references? Read More
