Category: News
What is the ID in the Booking Page URL?
Hello everyone,
I was wondering what that ID is that looks different in the URL for a bookin page depending on the user?
Any ideas and and how to find this information in an admin center?
Many thanks in advance
Hello everyone,I was wondering what that ID is that looks different in the URL for a bookin page depending on the user? Any ideas and and how to find this information in an admin center? Many thanks in advance Read More
Microsoft Partner Support (UK) – No answer
Hi
I’m trying to reach someone in Partner Support however all attempts lead nowhere.
I’ve opened cases and they have been closed automatically without being fully answered.
I’ve tried to use the Partner Support Options located here: https://support.microsoft.com/en-gb/topic/partner-support-options-6e2fefd9-4adf-2be1-9968-165aa84b1c3b
Support by phone takes you to the usual process for opening a case, this does not provide an option in the list for the problem I’m having. It also does seem to just result in opening a new case so I’m back where I started and no phone number provided.
If I click chat online with an agent I get the following:
I am logged in to my partner account, I have tried multiple computers.
I also tried calling the regular Microsoft Support number here in the UK 0344 800 2400 but it is an entirely automated service. It doesn’t understand my request and also doesn’t allow you to speak with an actual person.
Is anyone else having the same trouble?
HiI’m trying to reach someone in Partner Support however all attempts lead nowhere.I’ve opened cases and they have been closed automatically without being fully answered. I’ve tried to use the Partner Support Options located here: https://support.microsoft.com/en-gb/topic/partner-support-options-6e2fefd9-4adf-2be1-9968-165aa84b1c3b Support by phone takes you to the usual process for opening a case, this does not provide an option in the list for the problem I’m having. It also does seem to just result in opening a new case so I’m back where I started and no phone number provided. If I click chat online with an agent I get the following:I am logged in to my partner account, I have tried multiple computers. I also tried calling the regular Microsoft Support number here in the UK 0344 800 2400 but it is an entirely automated service. It doesn’t understand my request and also doesn’t allow you to speak with an actual person. Is anyone else having the same trouble? Read More
VBA Compile Error for each control variable must be variant or object
I have a vba code I am having issues with. The way it’s supposed to function is a userform opens when the button is pressed. In the UF, there are four checkboxes: A only, B only, C only, and D only each of which should be selected if the user’s data will contain that column (know as the master column). If so, the user is to enter the column letter it starts at in the text box next to it. Once the checkbox is clicked, a list of the potential column letters for the subcategories appears so the user can select where the data from the master column letter should be outputted into. Each Master column has a range it could fall into. When I run the code, nothing outputs.
Thanks in advance for any help!
I attached the sample document below. I also include the code that runs but doesn’t process any data. then i commented the updated one that gives me the compile error:
I have a vba code I am having issues with. The way it’s supposed to function is a userform opens when the button is pressed. In the UF, there are four checkboxes: A only, B only, C only, and D only each of which should be selected if the user’s data will contain that column (know as the master column). If so, the user is to enter the column letter it starts at in the text box next to it. Once the checkbox is clicked, a list of the potential column letters for the subcategories appears so the user can select where the data from the master column letter should be outputted into. Each Master column has a range it could fall into. When I run the code, nothing outputs. Thanks in advance for any help! Codes for the userform:Private Sub chboxA_Click() TextBox1.Enabled = chboxA.Value ‘ Toggle the enabling of TextBox1 based on chboxA’s state lstA.Visible = chboxA.Value ‘ Toggle the visibility of lstA based on chboxA’s stateEnd Sub Private Sub chboxB_Click() TextBox2.Enabled = chboxB.Value ‘ Toggle the enabling of TextBox2 based on chboxB’s state lstB.Visible = chboxB.Value ‘ Toggle the visibility of lstB based on chboxB’s stateEnd Sub Private Sub chboxC_Click() TextBox3.Enabled = chboxC.Value ‘ Toggle the enabling of TextBox3 based on chboxC’s state lstC.Visible = chboxC.Value ‘ Toggle the visibility of lstC based on chboxC’s stateEnd Sub Private Sub chboxD_Click() TextBox4.Enabled = chboxD.Value ‘ Toggle the enabling of TextBox4 based on chboxD’s state lstD.Visible = chboxD.Value ‘ Toggle the visibility of lstD based on chboxD’s stateEnd Sub Private Sub UserForm_Initialize() ‘ Initialize ListBoxes with columns Dim col As Variant For Each col In Array(“lstA”, “lstB”, “lstC”, “lstD”) With Me.Controls(col) .List = Array(“I”, “J”, “K”, “L”, “M”, “N”, “O”, “P”, “Q”, “R”, “S”, “T”, “U”, “V”, “W”) .MultiSelect = fmMultiSelectMulti .Visible = False ‘ Initialize all ListBoxes as hidden End With Next col ‘ Initialize the visibility based on checkboxes lstA.Visible = chboxA.Value lstB.Visible = chboxB.Value lstC.Visible = chboxC.Value lstD.Visible = chboxD.Value TextBox1.Enabled = chboxA.Value TextBox2.Enabled = chboxB.Value TextBox3.Enabled = chboxC.Value TextBox4.Enabled = chboxD.ValueEnd Sub Private Sub cmdProcessData_Click() Application.ScreenUpdating = False ‘ Disable screen updating to enhance performance Application.Calculation = xlCalculationManual ‘ Avoid recalculation until the end for performance Dim ws As Worksheet Set ws = ThisWorkbook.Sheets(“BidTrial”) Dim i As Integer Dim targetCols As String Dim masterCol As String Dim colLetter As String For i = 1 To 4 ‘ Check if the corresponding checkbox is checked If Me.Controls(“chbox” & Chr(64 + i)).Value Then colLetter = Me.Controls(“TextBox” & i).Text ‘ Validate the column letter is correct and only allow single column letters If colLetter <> “” And IsColumnValid(colLetter) Then masterCol = colLetter & “10:” & colLetter & “121” ‘ Data starts at row 10 targetCols = GetSelectedRanges(Me.Controls(“lst” & Chr(64 + i))) ‘ Copy data from master column to selected target columns If targetCols <> “” Then CopyData ws, masterCol, targetCols End If Else MsgBox “Invalid column letter in TextBox” & i, vbExclamation End If End If Next i Application.Calculate ‘ Recalculate all formulas in the workbook Application.ScreenUpdating = True ‘ Re-enable screen updating MsgBox “Data processing complete!”End Sub Function IsColumnValid(col As String) As Boolean IsColumnValid = (col >= “A” And col <= “W”) And Len(col) = 1 ‘ Ensure single letter between A and WEnd Function Function GetSelectedRanges(lstBox As MSForms.ListBox) As String Dim result As String Dim i As Integer For i = 0 To lstBox.ListCount – 1 If lstBox.selected(i) Then If result <> “” Then result = result & “,” result = result & lstBox.List(i) & “10:” & lstBox.List(i) & “121” ‘ Specify full range for each selected column End If Next i GetSelectedRanges = resultEnd Function Sub CopyData(ws As Worksheet, masterCol As String, targetCols As String) Dim targetRange As Range, cell As Range, targetCell As Range Dim colRange As Variant For Each colRange In Split(targetCols, “,”) Set targetRange = ws.Range(colRange) For Each cell In ws.Range(masterCol) If Not IsGrey(cell) And Not IsEmpty(cell.Value) Then For Each targetCell In targetRange If Not IsGrey(targetCell) Then targetCell.Value = cell.Value End If Next targetCell End If Next cell Next colRangeEnd Sub Function IsGrey(cell As Range) As Boolean IsGrey = (cell.Interior.Color = RGB(128, 128, 128)) ‘ Check if the cell’s color is greyEnd Function This is how my data looks and where it should be outputted into. For example, since A only has data, the user would enter H in the text box, then select each column that has A in it (L:O). Then the code would copy the data in H into those columns. For B only, the same would occur but only for headers with B (L:N). The code runs, but does not output. When I try to update the copydata to this: Sub CopyData(ws As Worksheet, masterCol As String, targetCols As String) Dim targetRange As Range, cell As Range, targetCell As Range Dim colRange As String ‘ Ensure that colRange is treated as a String here For Each colRange In Split(targetCols, “,”) Set targetRange = ws.Range(colRange) For Each cell In ws.Range(masterCol) If Not IsGrey(cell) And Not IsEmpty(cell.Value) Then For Each targetCell In targetRange.Cells ‘ Make sure to iterate over Cells of targetRange If Not IsGrey(targetCell) Then targetCell.Value = cell.Value End If Next targetCell End If Next cell Next colRangeEnd Sub When I update the code, I tend to have issues with it running due to For Each colRange In Split(targetCols, “,”). It’s being used as a variant because of it iterating over an array resulting from the split function, however, there seems to be inconsistencies in how vba is handling it. Not sure how to fix it.: I attached the sample document below. I also include the code that runs but doesn’t process any data. then i commented the updated one that gives me the compile error: Sub CopyData(ws As Worksheet, masterCol As String, targetCols As String) Dim targetRange As Range, cell As Range, targetCell As Range Dim colRange As String ‘ Ensure that colRange is treated as a String here For Each colRange In Split(targetCols, “,”) Set targetRange = ws.Range(colRange) For Each cell In ws.Range(masterCol) If Not IsGrey(cell) And Not IsEmpty(cell.Value) Then For Each targetCell In targetRange.Cells ‘ Make sure to iterate over Cells of targetRange If Not IsGrey(targetCell) Then targetCell.Value = cell.Value End If Next targetCell End If Next cell Next colRangeEnd Sub Read More
M365 Community Conference: The Intranet of Tomorrow – Beautiful, Flexible, and AI-ready
Session: The intranet of tomorrow: beautiful, flexible, and AI-ready
Speakers: Denise Trabona, Dave Cohen
The 2024 edition of the Microsoft 365 Community Conference had so many great sessions delivering insights and innovations, particularly this session on the intranet of tomorrow.
Denise Trabona and Dave Cohen led an interesting session detailing the future of the SharePoint-based intranet. They detailed how the intranet needs to be engaging, flexible, AI-ready and aligned with the web standards and the organization’s brand identity. The emphasis is on a user-centric design that ensures ease of navigation, personalized content delivery, and a cohesive experience across all devices.
Compelling content features
Denise showed new capabilities for engaging typography, color, hero web part, section backgrounds, image shapes, animation, video, and motion that will make the intranet content more visually appealing and memorable.
The new capabilities with images and video are impressive and will truly bring pages to life. Anyone can be a creator on the intranet – it’s not required to have extensive design training to create wonderful content.
Soon organizations will have the ability to bring custom font families into SharePoint Online using the new Brand Center. Page creators will be able to preview how the fonts look on the page and adjust as needed before applying to the site. Design ideas functionality, like in Microsoft PowerPoint, is coming to SharePoint as well. This will give options to authors to help inspire great looking pages using the content you have in a section, without any extensive design knowledge needed.
Another notable feature coming is flexible layouts. This feature will allow even more choices than the standard ones we have now, and smart ‘magnetic’ anchors will help align content. Dragging the section vertical size and the content within it was a big hit when shown as well! The other crowd pleaser was when coauthoring SharePoint pages was shown. The ability to work on a page at the same time as another author is amazing and will help content teams get the content finished more quickly.
SharePoint Start
SharePoint Start is the place to create new SharePoint pages but without the need for a site to host the page. The pages are technically stored in the user’s OneDrive but will be inaccessible to the user via the files viewer. The pages will be shown on SharePoint Start and will be sharable. The pages can be copied to a SharePoint site if needed afterwards, with the move function also coming.
This feature is designed to reduce barriers – creation of a site – to create content pages. The pages will have full capabilities just like you have when creating on a site.
The era of AI
The conference had a heavy emphasis on Copilot in Microsoft 365, which is understandable. This session was no different, due mostly to the fact that a substantial part of the grounding of Copilot is in SharePoint content. Combining the power of Microsoft’s Large Language Model and your content’s information, Copilot will use SharePoint’s content to power the knowledge in your organization. Using Copilot Studio, it is easy to create solutions that will use specific SharePoint sites for grounding for answers, acronyms, and more. Coming soon, we will also have more Copilot functionality joined with SharePoint, saving users time when creating and managing content.
Collaboration is the heartbeat of any organization, and the intranet of tomorrow is designed to enhance this. With advanced features that facilitate real-time collaboration and communication, teams can work together more effectively, regardless of their physical location!
Microsoft Tech Community – Latest Blogs –Read More
MATLAB Online command window not showing “>>” with no response in any input
Post Content Post Content command MATLAB Answers — New Questions
3/8 Simpson’s Rule
Hello guys. I have homework and I done most of parts. But I have a problem in code. Please help me. The questions like this
Write aMATLAB implementation that applies the Simpson’s 3/8 rule to find an approximation I
for I= integral(from 0 to 1) (e ^2x)*sin(6x)dx
when n=30,60,90 and 120
f=@(x)(exp^(2*x))*sin(6*x);
a=input(‘Enter lower limit a: ‘);
b=input(‘Enter upper limit b: ‘);
n=input(‘Enter the number of sub-intervals n: ‘);
h=(b-a)/n;
if rem(n,3)~=0
fprintf(‘n Enter valid n!!!’);
n=input(‘n Enter n as multiple of 3: ‘);
end
for k=1:1:n
x(k)=a+k*h;
y(k)=f(x(k));
end
so=0;sm3=0;
for k=2:1:n-1
if rem(k,3)==0
sm3=sm3+y(k);
else
so=so+y(k);
end
end
answer=(3*h/8)*(f(a)+f(b)+3*so+2*sm3);
fprintf(‘n The value of integration is %f’,answer);Hello guys. I have homework and I done most of parts. But I have a problem in code. Please help me. The questions like this
Write aMATLAB implementation that applies the Simpson’s 3/8 rule to find an approximation I
for I= integral(from 0 to 1) (e ^2x)*sin(6x)dx
when n=30,60,90 and 120
f=@(x)(exp^(2*x))*sin(6*x);
a=input(‘Enter lower limit a: ‘);
b=input(‘Enter upper limit b: ‘);
n=input(‘Enter the number of sub-intervals n: ‘);
h=(b-a)/n;
if rem(n,3)~=0
fprintf(‘n Enter valid n!!!’);
n=input(‘n Enter n as multiple of 3: ‘);
end
for k=1:1:n
x(k)=a+k*h;
y(k)=f(x(k));
end
so=0;sm3=0;
for k=2:1:n-1
if rem(k,3)==0
sm3=sm3+y(k);
else
so=so+y(k);
end
end
answer=(3*h/8)*(f(a)+f(b)+3*so+2*sm3);
fprintf(‘n The value of integration is %f’,answer); Hello guys. I have homework and I done most of parts. But I have a problem in code. Please help me. The questions like this
Write aMATLAB implementation that applies the Simpson’s 3/8 rule to find an approximation I
for I= integral(from 0 to 1) (e ^2x)*sin(6x)dx
when n=30,60,90 and 120
f=@(x)(exp^(2*x))*sin(6*x);
a=input(‘Enter lower limit a: ‘);
b=input(‘Enter upper limit b: ‘);
n=input(‘Enter the number of sub-intervals n: ‘);
h=(b-a)/n;
if rem(n,3)~=0
fprintf(‘n Enter valid n!!!’);
n=input(‘n Enter n as multiple of 3: ‘);
end
for k=1:1:n
x(k)=a+k*h;
y(k)=f(x(k));
end
so=0;sm3=0;
for k=2:1:n-1
if rem(k,3)==0
sm3=sm3+y(k);
else
so=so+y(k);
end
end
answer=(3*h/8)*(f(a)+f(b)+3*so+2*sm3);
fprintf(‘n The value of integration is %f’,answer); 3/8 simpson’s rule MATLAB Answers — New Questions
analyticity of a function
is there any function can be used to check if a function is analytic or not?is there any function can be used to check if a function is analytic or not? is there any function can be used to check if a function is analytic or not? MATLAB Answers — New Questions
• Given a three-phase power system with a medium-length transmission line, calculate the sending-end voltage and current by hand and by using Matlab code.
Trial>> %M-file to calculate the sending end voltage and current for a medium-length transmission line.
Trial>> %Initialize received voltage, impedance, and admittance
Trial>> vr = 12700 ;
Trial>> z = 0.1 + j*0.82;
Trial>> y = j*4.00e-3;
Trial>> %Calculate ABCD constants
Trial>> A=z*y/2 + 1;
Trial>> B=z;
Trial>> C=y * (z*y/4 + 1);
Trial>> D=z*y/2 + 1;
Trial>> %Calculate the sending end voltage
Trial>> ir = pol2cart(393.65,5.28);
Trial>> vs = A * vr + B * ir;
Trial>> [mag,phase] = cart2pol(vs);
Not enough input arguments.
Error in cart2pol (line 21)
th = atan2(y,x);Trial>> %M-file to calculate the sending end voltage and current for a medium-length transmission line.
Trial>> %Initialize received voltage, impedance, and admittance
Trial>> vr = 12700 ;
Trial>> z = 0.1 + j*0.82;
Trial>> y = j*4.00e-3;
Trial>> %Calculate ABCD constants
Trial>> A=z*y/2 + 1;
Trial>> B=z;
Trial>> C=y * (z*y/4 + 1);
Trial>> D=z*y/2 + 1;
Trial>> %Calculate the sending end voltage
Trial>> ir = pol2cart(393.65,5.28);
Trial>> vs = A * vr + B * ir;
Trial>> [mag,phase] = cart2pol(vs);
Not enough input arguments.
Error in cart2pol (line 21)
th = atan2(y,x); Trial>> %M-file to calculate the sending end voltage and current for a medium-length transmission line.
Trial>> %Initialize received voltage, impedance, and admittance
Trial>> vr = 12700 ;
Trial>> z = 0.1 + j*0.82;
Trial>> y = j*4.00e-3;
Trial>> %Calculate ABCD constants
Trial>> A=z*y/2 + 1;
Trial>> B=z;
Trial>> C=y * (z*y/4 + 1);
Trial>> D=z*y/2 + 1;
Trial>> %Calculate the sending end voltage
Trial>> ir = pol2cart(393.65,5.28);
Trial>> vs = A * vr + B * ir;
Trial>> [mag,phase] = cart2pol(vs);
Not enough input arguments.
Error in cart2pol (line 21)
th = atan2(y,x); how do i write the cart2 pol and pol2 cart formula for this? MATLAB Answers — New Questions
What To Do When Stuck in QuickBooks administrator permissions needed Issue?
Troubleshooting Solutions: QuickBooks administrator permissions needed
Verify Administrator Status: Ensure that your QuickBooks account has been designated as an administrator. Go to the User List within QuickBooks and confirm that your account has administrative privileges. If not, have an existing administrator grant you these permissions.
Recheck User Permissions: Review the specific permissions assigned to your account. Navigate to the User List and adjust permissions accordingly, granting access to areas and functions essential for your role.
User Access Rights: Confirm that the specific tasks or features you’re trying to access are within the scope of your user access rights. QuickBooks offers granular control over user permissions, so ensure you have the necessary rights for the tasks you need to perform.
Company File Permissions: Check the permissions set for the company file itself. Make sure it hasn’t been set to read-only or restricted access, which could prevent you from making changes or accessing certain features.
Firewall and Antivirus Settings: Verify that your firewall or antivirus software isn’t blocking QuickBooks from accessing necessary resources. Adjust settings as needed to allow QuickBooks full access to function properly.
Update QuickBooks: Ensure that you are using the latest version of QuickBooks. Updates often include bug fixes and security patches that may resolve permission-related issues.
Data Corruption: If none of the above solutions work, there might be data corruption within the QuickBooks file. Attempt to restore a backup copy of the file from before the issue started occurring.
Consult QuickBooks Support: If the problem persists, consider reaching out to QuickBooks support for further assistance. They can provide specialized guidance tailored to your specific issue and may have additional troubleshooting steps.
Review Audit Trail: Check the audit trail within QuickBooks to see if any recent changes have affected permissions. This can help identify if the issue stems from a recent adjustment or action within the software.
By following these troubleshooting steps, you should be able to diagnose and resolve the QuickBooks administrator permissions needed issue, restoring full functionality to your account.
Troubleshooting Solutions: QuickBooks administrator permissions needed Verify Administrator Status: Ensure that your QuickBooks account has been designated as an administrator. Go to the User List within QuickBooks and confirm that your account has administrative privileges. If not, have an existing administrator grant you these permissions.Recheck User Permissions: Review the specific permissions assigned to your account. Navigate to the User List and adjust permissions accordingly, granting access to areas and functions essential for your role.User Access Rights: Confirm that the specific tasks or features you’re trying to access are within the scope of your user access rights. QuickBooks offers granular control over user permissions, so ensure you have the necessary rights for the tasks you need to perform.Company File Permissions: Check the permissions set for the company file itself. Make sure it hasn’t been set to read-only or restricted access, which could prevent you from making changes or accessing certain features.Firewall and Antivirus Settings: Verify that your firewall or antivirus software isn’t blocking QuickBooks from accessing necessary resources. Adjust settings as needed to allow QuickBooks full access to function properly.Update QuickBooks: Ensure that you are using the latest version of QuickBooks. Updates often include bug fixes and security patches that may resolve permission-related issues.Data Corruption: If none of the above solutions work, there might be data corruption within the QuickBooks file. Attempt to restore a backup copy of the file from before the issue started occurring.Consult QuickBooks Support: If the problem persists, consider reaching out to QuickBooks support for further assistance. They can provide specialized guidance tailored to your specific issue and may have additional troubleshooting steps.Review Audit Trail: Check the audit trail within QuickBooks to see if any recent changes have affected permissions. This can help identify if the issue stems from a recent adjustment or action within the software. By following these troubleshooting steps, you should be able to diagnose and resolve the QuickBooks administrator permissions needed issue, restoring full functionality to your account. Read More
Neuer BIT GET-Empfehlungscode im Jahr 2024: qp29
Das Empfehlungsprogramm von B I T G E T ist eine großartige Gelegenheit für alle Beteiligten! Nutzen Sie den empfohlenen B I T G E T-Empfehlungscode “qp29” und sichern Sie sich einen großzügigen Bonus von 1000 $. Durch das Teilen Ihres Codes mit Freunden haben Sie zusätzlich die Möglichkeit, eine erhebliche Provision von 50 % zu verdienen.
Das Empfehlungsprogramm von B I T G E T ist eine großartige Gelegenheit für alle Beteiligten! Nutzen Sie den empfohlenen B I T G E T-Empfehlungscode “qp29” und sichern Sie sich einen großzügigen Bonus von 1000 $. Durch das Teilen Ihres Codes mit Freunden haben Sie zusätzlich die Möglichkeit, eine erhebliche Provision von 50 % zu verdienen. Read More
impossibilité d’afficher des lignes masquées
Bonjour,
Pour les besoins de traitement, j’ai masqué des colonnes et des lignes il y a quelques jours.
En reprenant mon tableau j’ai réussi à réafficher les colonnes, mais je ne parviens pas à afficher les lignes selon les procédures habituelles.
Existe-t-il d’autres solutions ?
Merci
Bonjour,Pour les besoins de traitement, j’ai masqué des colonnes et des lignes il y a quelques jours.En reprenant mon tableau j’ai réussi à réafficher les colonnes, mais je ne parviens pas à afficher les lignes selon les procédures habituelles.Existe-t-il d’autres solutions ?Merci Read More
Sending an email automatically based on criteria in cell
Hello!
I need to create a way to send an email automatically to the same three recipients when a new row in this spreadsheet is updated and Column L is marked “yes” from the dropdown menu. I have tried to use Power Automate to the best of my ability, but am not getting anywhere with it. Any suggestions on either a VBA or Power Automate?
Hello! I need to create a way to send an email automatically to the same three recipients when a new row in this spreadsheet is updated and Column L is marked “yes” from the dropdown menu. I have tried to use Power Automate to the best of my ability, but am not getting anywhere with it. Any suggestions on either a VBA or Power Automate? Read More
Our layout in Viva Engage is different from Microsoft screenshots
Hello,
We have been testing Viva Engage to see if it is something we can make available for our employees.
I have noticed that the layout I am seeing and the layout I have seen on the internet for Viva Engage differ a bit. Does anyone know why this is happening? Is it a setting somewhere, different license, something else?
On the internet, tabs at the top, no left menu
What I see. No tabs, left menu (the button does not close the menu, but just shows other viva apps), title is Engage, not Viva Engage
Hello, We have been testing Viva Engage to see if it is something we can make available for our employees. I have noticed that the layout I am seeing and the layout I have seen on the internet for Viva Engage differ a bit. Does anyone know why this is happening? Is it a setting somewhere, different license, something else?On the internet, tabs at the top, no left menu What I see. No tabs, left menu (the button does not close the menu, but just shows other viva apps), title is Engage, not Viva Engage Read More
Any client using Viva Goals as Performance Management?
A client is interested in modernizing their performance management system, leading them to consider Viva Goals.
Their requirements, however, extend beyond standard goal alignment and team-level performance tracking. They are seeking a system that offers, Individual performance management (setting, modifying, and reviewing), Integration of career development, training, and compensation decisions based on performance data, Tracking of performance history at both individual and organizational levels etc,
Our assessment suggests that Viva Goals alone may not fully meet all these needs. We believe that a solution integrating Viva Goals with a total reward-driven performance management system could be more suitable.
We would greatly appreciate any insights or experiences you might have regarding similar implementations. Additionally, we are interested in discussing possible workarounds or integrations that could meet our client’s needs.
A client is interested in modernizing their performance management system, leading them to consider Viva Goals.Their requirements, however, extend beyond standard goal alignment and team-level performance tracking. They are seeking a system that offers, Individual performance management (setting, modifying, and reviewing), Integration of career development, training, and compensation decisions based on performance data, Tracking of performance history at both individual and organizational levels etc,Our assessment suggests that Viva Goals alone may not fully meet all these needs. We believe that a solution integrating Viva Goals with a total reward-driven performance management system could be more suitable.We would greatly appreciate any insights or experiences you might have regarding similar implementations. Additionally, we are interested in discussing possible workarounds or integrations that could meet our client’s needs. Read More
Saas Subscription Landing page, Webhooks and License Assignments ?
I’m building and testing an Add-in for Excel that I’m trying to monetise by adding some ‘pro’ features that are unlocked through a Marketplace Saas subscription, following:
and
and
I’m confused about a few things, and need a little help, please:
1. Is it still true that transactable SaaS offers can only be done through Microsoft with a Work or School account?
2. If so, do all (non-School/Work) Microsoft Accounts have the same tenant id (or how else do I detect them)?
3. In the SaaS fulfillment lifecycle, when the purchaser gets to my landing page, I can resolve the token to get a subscription detail with the “Quantity”, “Purchaser”, “Beneficiary” etc. If this is a company Admin buying multiple licenses for their staff, I don’t get any information about who will actually get the license (Purchaser and Beneficiary seem to both be the same, and would be the Admin). It seems that once the subscription has been activated, there’s a further lifecycle process for the Admin to assign and unassign the license(s) to their users (in the MS Admin Center), which isn’t shown in that page? So instead of my landing page saying “Your subscription is now active, please start using it”, I should be saying “Your subscription is now active, please go back to the Admin Center and assign the license(s) to your users”?
4. When an admin assigns/unassigns licenses for my app to users, I was expecting to get a webhook notification of that, so I do any per-user config work I need to do. But there doesn’t seem to be such a webhook notification, or did I miss something?
5. It seems that the only way for me to know if someone is licensed to use my add-in’s Pro features is to use the (Beta?) Graph UsageRights API at startup every time – which surely defeats one of the points of having my own users database?
I’m building and testing an Add-in for Excel that I’m trying to monetise by adding some ‘pro’ features that are unlocked through a Marketplace Saas subscription, following:https://learn.microsoft.com/en-us/partner-center/marketplace/monetize-addins-through-microsoft-commercial-marketplaceandhttps://learn.microsoft.com/en-us/partner-center/marketplace/partner-center-portal/pc-saas-fulfillment-life-cycleandhttps://learn.microsoft.com/en-us/partner-center/marketplace/partner-center-portal/pc-saas-fulfillment-webhook I’m confused about a few things, and need a little help, please: 1. Is it still true that transactable SaaS offers can only be done through Microsoft with a Work or School account? 2. If so, do all (non-School/Work) Microsoft Accounts have the same tenant id (or how else do I detect them)? 3. In the SaaS fulfillment lifecycle, when the purchaser gets to my landing page, I can resolve the token to get a subscription detail with the “Quantity”, “Purchaser”, “Beneficiary” etc. If this is a company Admin buying multiple licenses for their staff, I don’t get any information about who will actually get the license (Purchaser and Beneficiary seem to both be the same, and would be the Admin). It seems that once the subscription has been activated, there’s a further lifecycle process for the Admin to assign and unassign the license(s) to their users (in the MS Admin Center), which isn’t shown in that page? So instead of my landing page saying “Your subscription is now active, please start using it”, I should be saying “Your subscription is now active, please go back to the Admin Center and assign the license(s) to your users”? 4. When an admin assigns/unassigns licenses for my app to users, I was expecting to get a webhook notification of that, so I do any per-user config work I need to do. But there doesn’t seem to be such a webhook notification, or did I miss something? 5. It seems that the only way for me to know if someone is licensed to use my add-in’s Pro features is to use the (Beta?) Graph UsageRights API at startup every time – which surely defeats one of the points of having my own users database? Read More
liscence manager error 8
i want to fix this error instantlyi want to fix this error instantly i want to fix this error instantly how to fix this MATLAB Answers — New Questions
optimization of nested loop with two variables
I have an optimization problem of minimizing a two-stage sampling variance subject to the expected variable cost as constraint, and here are my functions:
the objective function is:
function dblSum=dblSumFun(n_h,m_hi)
h=length(N_h);
dblSum=0;
for h=1:length(N_h)
iSum=0;
for i=1:N_h(h)
iTerm=(1/m_hi(i)-1/M_hi(i))*M_hi(i).^2*swh2(h);
iSum=iSum+iTerm;
end
hTerm = (1/n_h(h)-1/N_h(h))*N_h(h)^2*sbh2(h)+N_h(h)/n_h(h)*iSum;
dblSum=dblSum+hterm;
end
end
and the constraint is:
function [c,ceq]=nonlcon(n_h,m_hi)
h=length(N_h)
function dblSumc=dblSumFun(n_h,m_hi)
dblSumc=0;
for h=1:length(N_h)
iSum=0;
for i=1:N_h(h)
iTerm=(0.5*m_hi(i))
iSum=iSum+iTerm;
end
hTerm = 3.5-n_h(h)*0.7-n_h(h)/N_h(h)*iSum;
dblSumc=dblSumc+hterm;
end
end
ceq=dblSumc;% this will be satisfied if it eval to zero
c=[];
and the main coding for optimization is as follows
n_h0=zeros(length(N_h),1);%initial guess
m_hi0=zeros(26*n_h(h),1);
X0=[n_h0;m_hi0];
A=[];
B=[];
Aeq=[];
Beq=[];
options=optimoptions(‘fmincon’,’Algorithm’,’sqp’,’Display’,’iter-detailed’,…
‘MaxFunctionEvaluations’,100000,’MaxIterations’,2000,…
‘FunctionTolerance’,1e-10);
[n_h,m_hi,const]=fmincon(@(n_h,m_hi) obj_function(n_h,m_hi),X0,A,B,Aeq,Beq,LB,UB,@(n_h,m_hi) nonlcon(n_h,m_hi),options)
I wanted to obtain a vector of n_h for h=1,…,26; and a vector of m_hi for h=1,…,26 and i=1,…,n_h(h). Any help?I have an optimization problem of minimizing a two-stage sampling variance subject to the expected variable cost as constraint, and here are my functions:
the objective function is:
function dblSum=dblSumFun(n_h,m_hi)
h=length(N_h);
dblSum=0;
for h=1:length(N_h)
iSum=0;
for i=1:N_h(h)
iTerm=(1/m_hi(i)-1/M_hi(i))*M_hi(i).^2*swh2(h);
iSum=iSum+iTerm;
end
hTerm = (1/n_h(h)-1/N_h(h))*N_h(h)^2*sbh2(h)+N_h(h)/n_h(h)*iSum;
dblSum=dblSum+hterm;
end
end
and the constraint is:
function [c,ceq]=nonlcon(n_h,m_hi)
h=length(N_h)
function dblSumc=dblSumFun(n_h,m_hi)
dblSumc=0;
for h=1:length(N_h)
iSum=0;
for i=1:N_h(h)
iTerm=(0.5*m_hi(i))
iSum=iSum+iTerm;
end
hTerm = 3.5-n_h(h)*0.7-n_h(h)/N_h(h)*iSum;
dblSumc=dblSumc+hterm;
end
end
ceq=dblSumc;% this will be satisfied if it eval to zero
c=[];
and the main coding for optimization is as follows
n_h0=zeros(length(N_h),1);%initial guess
m_hi0=zeros(26*n_h(h),1);
X0=[n_h0;m_hi0];
A=[];
B=[];
Aeq=[];
Beq=[];
options=optimoptions(‘fmincon’,’Algorithm’,’sqp’,’Display’,’iter-detailed’,…
‘MaxFunctionEvaluations’,100000,’MaxIterations’,2000,…
‘FunctionTolerance’,1e-10);
[n_h,m_hi,const]=fmincon(@(n_h,m_hi) obj_function(n_h,m_hi),X0,A,B,Aeq,Beq,LB,UB,@(n_h,m_hi) nonlcon(n_h,m_hi),options)
I wanted to obtain a vector of n_h for h=1,…,26; and a vector of m_hi for h=1,…,26 and i=1,…,n_h(h). Any help? I have an optimization problem of minimizing a two-stage sampling variance subject to the expected variable cost as constraint, and here are my functions:
the objective function is:
function dblSum=dblSumFun(n_h,m_hi)
h=length(N_h);
dblSum=0;
for h=1:length(N_h)
iSum=0;
for i=1:N_h(h)
iTerm=(1/m_hi(i)-1/M_hi(i))*M_hi(i).^2*swh2(h);
iSum=iSum+iTerm;
end
hTerm = (1/n_h(h)-1/N_h(h))*N_h(h)^2*sbh2(h)+N_h(h)/n_h(h)*iSum;
dblSum=dblSum+hterm;
end
end
and the constraint is:
function [c,ceq]=nonlcon(n_h,m_hi)
h=length(N_h)
function dblSumc=dblSumFun(n_h,m_hi)
dblSumc=0;
for h=1:length(N_h)
iSum=0;
for i=1:N_h(h)
iTerm=(0.5*m_hi(i))
iSum=iSum+iTerm;
end
hTerm = 3.5-n_h(h)*0.7-n_h(h)/N_h(h)*iSum;
dblSumc=dblSumc+hterm;
end
end
ceq=dblSumc;% this will be satisfied if it eval to zero
c=[];
and the main coding for optimization is as follows
n_h0=zeros(length(N_h),1);%initial guess
m_hi0=zeros(26*n_h(h),1);
X0=[n_h0;m_hi0];
A=[];
B=[];
Aeq=[];
Beq=[];
options=optimoptions(‘fmincon’,’Algorithm’,’sqp’,’Display’,’iter-detailed’,…
‘MaxFunctionEvaluations’,100000,’MaxIterations’,2000,…
‘FunctionTolerance’,1e-10);
[n_h,m_hi,const]=fmincon(@(n_h,m_hi) obj_function(n_h,m_hi),X0,A,B,Aeq,Beq,LB,UB,@(n_h,m_hi) nonlcon(n_h,m_hi),options)
I wanted to obtain a vector of n_h for h=1,…,26; and a vector of m_hi for h=1,…,26 and i=1,…,n_h(h). Any help? nonlinear optimization nested sum vector MATLAB Answers — New Questions
How to Increase plotting speed
Hi everyone,I have a big trouble on plotting my results,it took a long time to complete the figure.Is there any method to increase plotting speed?
Thanks for your help!!!
clear
L=0.1;
a=L/2;
v=3e8;
f1=1.2e9;
f2=4.8e9;
f3=10e9;
w1=(2*pi*f1);
w2=(2*pi*f2);
w3=(2*pi*f3);
Z01=50;
Z02=50;
a0=(log(Z02/Z01))./(2.*L);
T=2*a;
k=1;
syms x y w
Am=-5;
%%% Eight section SFG
% Calculate gamma
s=L/8;
for n=1:1:k
V=Am(n);
P_am=((V*cos(n*pi*x/T)))*(exp(-2*1i*(w/v)*x));
P_am_int1(n)=int(P_am,x,[0 s]);
P_am_int2(n)=int(P_am,x,[s 2*s]);
P_am_int3(n)=int(P_am,x,[2*s 3*s]);
P_am_int4(n)=int(P_am,x,[3*s 4*s]);
P_am_int5(n)=int(P_am,x,[4*s 5*s]);
P_am_int6(n)=int(P_am,x,[5*s 6*s]);
P_am_int7(n)=int(P_am,x,[6*s 7*s]);
P_am_int8(n)=int(P_am,x,[7*s 8*s]);
end
Ga1=sum(P_am_int1);
Ga2=sum(P_am_int2);
Ga3=sum(P_am_int3);
Ga4=sum(P_am_int4);
Ga5=sum(P_am_int5);
Ga6=sum(P_am_int6);
Ga7=sum(P_am_int7);
Ga8=sum(P_am_int8);
Ga=[Ga1 Ga2 Ga3 Ga4 Ga5 Ga6 Ga7 Ga8];
Ta=1-((Ga(7:-1:1)).^2);
%%% SFG
section_num=8;
gamma_app8=Ga(section_num);
for m=1:1:section_num-1
gamma_app8=gamma_app8*((Ta(section_num-m)))/(1+abs((gamma_app8*Ga(section_num-m))));
gamma_app8=gamma_app8+Ga(section_num-m);
end
fplot(w,abs(gamma_app8),[0 w3],’-‘,’LineWidth’,3)Hi everyone,I have a big trouble on plotting my results,it took a long time to complete the figure.Is there any method to increase plotting speed?
Thanks for your help!!!
clear
L=0.1;
a=L/2;
v=3e8;
f1=1.2e9;
f2=4.8e9;
f3=10e9;
w1=(2*pi*f1);
w2=(2*pi*f2);
w3=(2*pi*f3);
Z01=50;
Z02=50;
a0=(log(Z02/Z01))./(2.*L);
T=2*a;
k=1;
syms x y w
Am=-5;
%%% Eight section SFG
% Calculate gamma
s=L/8;
for n=1:1:k
V=Am(n);
P_am=((V*cos(n*pi*x/T)))*(exp(-2*1i*(w/v)*x));
P_am_int1(n)=int(P_am,x,[0 s]);
P_am_int2(n)=int(P_am,x,[s 2*s]);
P_am_int3(n)=int(P_am,x,[2*s 3*s]);
P_am_int4(n)=int(P_am,x,[3*s 4*s]);
P_am_int5(n)=int(P_am,x,[4*s 5*s]);
P_am_int6(n)=int(P_am,x,[5*s 6*s]);
P_am_int7(n)=int(P_am,x,[6*s 7*s]);
P_am_int8(n)=int(P_am,x,[7*s 8*s]);
end
Ga1=sum(P_am_int1);
Ga2=sum(P_am_int2);
Ga3=sum(P_am_int3);
Ga4=sum(P_am_int4);
Ga5=sum(P_am_int5);
Ga6=sum(P_am_int6);
Ga7=sum(P_am_int7);
Ga8=sum(P_am_int8);
Ga=[Ga1 Ga2 Ga3 Ga4 Ga5 Ga6 Ga7 Ga8];
Ta=1-((Ga(7:-1:1)).^2);
%%% SFG
section_num=8;
gamma_app8=Ga(section_num);
for m=1:1:section_num-1
gamma_app8=gamma_app8*((Ta(section_num-m)))/(1+abs((gamma_app8*Ga(section_num-m))));
gamma_app8=gamma_app8+Ga(section_num-m);
end
fplot(w,abs(gamma_app8),[0 w3],’-‘,’LineWidth’,3) Hi everyone,I have a big trouble on plotting my results,it took a long time to complete the figure.Is there any method to increase plotting speed?
Thanks for your help!!!
clear
L=0.1;
a=L/2;
v=3e8;
f1=1.2e9;
f2=4.8e9;
f3=10e9;
w1=(2*pi*f1);
w2=(2*pi*f2);
w3=(2*pi*f3);
Z01=50;
Z02=50;
a0=(log(Z02/Z01))./(2.*L);
T=2*a;
k=1;
syms x y w
Am=-5;
%%% Eight section SFG
% Calculate gamma
s=L/8;
for n=1:1:k
V=Am(n);
P_am=((V*cos(n*pi*x/T)))*(exp(-2*1i*(w/v)*x));
P_am_int1(n)=int(P_am,x,[0 s]);
P_am_int2(n)=int(P_am,x,[s 2*s]);
P_am_int3(n)=int(P_am,x,[2*s 3*s]);
P_am_int4(n)=int(P_am,x,[3*s 4*s]);
P_am_int5(n)=int(P_am,x,[4*s 5*s]);
P_am_int6(n)=int(P_am,x,[5*s 6*s]);
P_am_int7(n)=int(P_am,x,[6*s 7*s]);
P_am_int8(n)=int(P_am,x,[7*s 8*s]);
end
Ga1=sum(P_am_int1);
Ga2=sum(P_am_int2);
Ga3=sum(P_am_int3);
Ga4=sum(P_am_int4);
Ga5=sum(P_am_int5);
Ga6=sum(P_am_int6);
Ga7=sum(P_am_int7);
Ga8=sum(P_am_int8);
Ga=[Ga1 Ga2 Ga3 Ga4 Ga5 Ga6 Ga7 Ga8];
Ta=1-((Ga(7:-1:1)).^2);
%%% SFG
section_num=8;
gamma_app8=Ga(section_num);
for m=1:1:section_num-1
gamma_app8=gamma_app8*((Ta(section_num-m)))/(1+abs((gamma_app8*Ga(section_num-m))));
gamma_app8=gamma_app8+Ga(section_num-m);
end
fplot(w,abs(gamma_app8),[0 w3],’-‘,’LineWidth’,3) plotting MATLAB Answers — New Questions
FFT is suddenly slow down for repeated operations.
Hello. I am conducting a simulation with a 3-dimensional matrix using Matlab. While performing FFT about one dimension of the 3-dimensional matrix using GPU for repeated operations, I noticed that the computation speed suddenly slows down. Below is a brief summary of the problematic code.
matlab
clear all; close all; clc;
k = 501;
A = zeros(k,k,k,’gpuArray’);
B = zeros(k,k,k,’gpuArray’);
for n = 1:k
tic
B(:,:,:) = fftshift(fft(ifftshift(A,1),[],1),1);
disp(num2str([n, toc]))
end
The result of running the code is as follows:
Result
….
236 7.52e-05
237 7.03e-05
238 7.11e-05
239 7.34e-05
240 7.29e-05
241 7.02e-05
242 0.0235287
243 0.0472623
244 0.0312132
245 0.0444045
246 0.0305904
247 0.0463637
248 0.0309244
….
As the result, from the 242nd iteration, the FFT operation significantly slows down.
I am curious about the cause of this issue.
The GPU used is 4090.
I would appreciate it if you could let me know what the problem might be.Hello. I am conducting a simulation with a 3-dimensional matrix using Matlab. While performing FFT about one dimension of the 3-dimensional matrix using GPU for repeated operations, I noticed that the computation speed suddenly slows down. Below is a brief summary of the problematic code.
matlab
clear all; close all; clc;
k = 501;
A = zeros(k,k,k,’gpuArray’);
B = zeros(k,k,k,’gpuArray’);
for n = 1:k
tic
B(:,:,:) = fftshift(fft(ifftshift(A,1),[],1),1);
disp(num2str([n, toc]))
end
The result of running the code is as follows:
Result
….
236 7.52e-05
237 7.03e-05
238 7.11e-05
239 7.34e-05
240 7.29e-05
241 7.02e-05
242 0.0235287
243 0.0472623
244 0.0312132
245 0.0444045
246 0.0305904
247 0.0463637
248 0.0309244
….
As the result, from the 242nd iteration, the FFT operation significantly slows down.
I am curious about the cause of this issue.
The GPU used is 4090.
I would appreciate it if you could let me know what the problem might be. Hello. I am conducting a simulation with a 3-dimensional matrix using Matlab. While performing FFT about one dimension of the 3-dimensional matrix using GPU for repeated operations, I noticed that the computation speed suddenly slows down. Below is a brief summary of the problematic code.
matlab
clear all; close all; clc;
k = 501;
A = zeros(k,k,k,’gpuArray’);
B = zeros(k,k,k,’gpuArray’);
for n = 1:k
tic
B(:,:,:) = fftshift(fft(ifftshift(A,1),[],1),1);
disp(num2str([n, toc]))
end
The result of running the code is as follows:
Result
….
236 7.52e-05
237 7.03e-05
238 7.11e-05
239 7.34e-05
240 7.29e-05
241 7.02e-05
242 0.0235287
243 0.0472623
244 0.0312132
245 0.0444045
246 0.0305904
247 0.0463637
248 0.0309244
….
As the result, from the 242nd iteration, the FFT operation significantly slows down.
I am curious about the cause of this issue.
The GPU used is 4090.
I would appreciate it if you could let me know what the problem might be. fft, for loop, gpu MATLAB Answers — New Questions
“Dynamics 365 CRM” app is identified as “PowerApps – apps.powerapps.com”
Hello community,
We have an interesting occasion with Dynamics 365 CRM app in Sign-in logs.
When a user logs into the Dynamics app, we see “PowerApps – apps.powerapps.com” in the Sig-in logs in Entra ID.
Support engineer from Microsoft explained it as service dependencies.
Conditional Access service dependencies – Microsoft Entra ID | Microsoft Learn
We see that there is a dependency with Project, but not with Power Automate (could be missed in Microsoft article?).
Does anybody here have a similar behavior?
We found it while working on conditional access policy for Dynamics.
Hello community, We have an interesting occasion with Dynamics 365 CRM app in Sign-in logs.When a user logs into the Dynamics app, we see “PowerApps – apps.powerapps.com” in the Sig-in logs in Entra ID.Support engineer from Microsoft explained it as service dependencies. Conditional Access service dependencies – Microsoft Entra ID | Microsoft LearnWe see that there is a dependency with Project, but not with Power Automate (could be missed in Microsoft article?). Does anybody here have a similar behavior?We found it while working on conditional access policy for Dynamics. Read More