Category: News
MDI Health Issue “Auditing on the Configuration container is not enabled as required”
Hi,
I have tried to resolve this MDI Health Issue “Auditing on the Configuration container is not enabled as required”, but sadly without sucess.
I have followed the instructions posted here https://aka.ms/mdi/ExchangeAuditing, but still the issue is displayed. I have to say I have found the instructions quite useful on other Health issues, but this one proved to be tricky.
I tried to search the net for this issue, but did not come up with anything usefull.
Can you please advise on how to possibly resolve this issue?
Best regards,
Robert
Hi, I have tried to resolve this MDI Health Issue “Auditing on the Configuration container is not enabled as required”, but sadly without sucess. I have followed the instructions posted here https://aka.ms/mdi/ExchangeAuditing, but still the issue is displayed. I have to say I have found the instructions quite useful on other Health issues, but this one proved to be tricky. I tried to search the net for this issue, but did not come up with anything usefull. Can you please advise on how to possibly resolve this issue? Best regards,Robert Read More
reed solomon code over odd characteristic field
please help! how can i obtain a gen matrix and gen polynimial for reed solomon codes over odd characteristic field? all tolls that i found were intended for fields over GF(2^m).please help! how can i obtain a gen matrix and gen polynimial for reed solomon codes over odd characteristic field? all tolls that i found were intended for fields over GF(2^m). please help! how can i obtain a gen matrix and gen polynimial for reed solomon codes over odd characteristic field? all tolls that i found were intended for fields over GF(2^m). reed-solomon, rs MATLAB Answers — New Questions
How do I create a quarterly calendar that populates data from a table for each team?
I have 9 subordinate teams that each consist of ~5-7 cities along with directorates within our headquarters. Each team and directorate populates a shared sharepoint list of the events that they are conducting with a start date and end date. The list can be exported to either excel, CSV, or powerBI.
I would like to have the events from the exported sharepoint list populate onto a quarterly calendar where columns are dates and rows are cities grouped in their respective teams. When a city is conducting an event it would show what event on the respective dates (start date & end date).
Any help would be greatly appreciated.
link to excel template (mock calendar and exported data on the export data tab)
I have 9 subordinate teams that each consist of ~5-7 cities along with directorates within our headquarters. Each team and directorate populates a shared sharepoint list of the events that they are conducting with a start date and end date. The list can be exported to either excel, CSV, or powerBI. I would like to have the events from the exported sharepoint list populate onto a quarterly calendar where columns are dates and rows are cities grouped in their respective teams. When a city is conducting an event it would show what event on the respective dates (start date & end date). Any help would be greatly appreciated. link to excel template (mock calendar and exported data on the export data tab) Read More
How to use looping method to crop image dynamically (auto-cropping)?
Hello. How to crop image using dynamic cropping method in matlab? Is there any example implementation codes?
Lets say, my original image have two different sizes which are 482 x 841 pixels and 608 x 865 pixels, so can I use loop step at first to extend the pixels which those that not enough pixels if I want to crop into 512 x 512 pixels? If the image size is enough to crop into 512 x512 pixels so no need to extend the pixels. I recently use this code:-
%To read input image
I=imread(‘1_776.jpg’);
imfinfo(‘1_776.jpg’)
First image, image size 482 x 841 px
Second image, image size 608 x 865 px
%To resize image
out = padarray(I, [10 10], 0, ‘both’);
imshow(out);
imwrite(out,’resize1.jpg’);
but this is manual. Now I want it to automatically crop only specific area.Hello. How to crop image using dynamic cropping method in matlab? Is there any example implementation codes?
Lets say, my original image have two different sizes which are 482 x 841 pixels and 608 x 865 pixels, so can I use loop step at first to extend the pixels which those that not enough pixels if I want to crop into 512 x 512 pixels? If the image size is enough to crop into 512 x512 pixels so no need to extend the pixels. I recently use this code:-
%To read input image
I=imread(‘1_776.jpg’);
imfinfo(‘1_776.jpg’)
First image, image size 482 x 841 px
Second image, image size 608 x 865 px
%To resize image
out = padarray(I, [10 10], 0, ‘both’);
imshow(out);
imwrite(out,’resize1.jpg’);
but this is manual. Now I want it to automatically crop only specific area. Hello. How to crop image using dynamic cropping method in matlab? Is there any example implementation codes?
Lets say, my original image have two different sizes which are 482 x 841 pixels and 608 x 865 pixels, so can I use loop step at first to extend the pixels which those that not enough pixels if I want to crop into 512 x 512 pixels? If the image size is enough to crop into 512 x512 pixels so no need to extend the pixels. I recently use this code:-
%To read input image
I=imread(‘1_776.jpg’);
imfinfo(‘1_776.jpg’)
First image, image size 482 x 841 px
Second image, image size 608 x 865 px
%To resize image
out = padarray(I, [10 10], 0, ‘both’);
imshow(out);
imwrite(out,’resize1.jpg’);
but this is manual. Now I want it to automatically crop only specific area. loops MATLAB Answers — New Questions
Need help ordering duplicated values in table
Hello! I have a table with thousands of duplicate IDs and I am trying to create an sequential order to show how many times the IDs are listed. The CountIF function gives me the total count listed on each row and that is not what I am looking for. Any help is much appreciated. Thank you!
MBR_CONTR_EXT_IDCountIfWhat I want800117684-0011800117800-0021800117800-0022800117805-0021800117818-0021800117921-0011800117979-0011800118080-0021800118080-0022800118207-0011800118291-0011800118294-0011800118308-0041800118308-0042800118528-0011800118627-0011800118730-0021800118746-0031800118747-0051800118747-0052800118747-0053800118797-0051800118797-0052800118797-0053800118797-0054800118797-0055
Hello! I have a table with thousands of duplicate IDs and I am trying to create an sequential order to show how many times the IDs are listed. The CountIF function gives me the total count listed on each row and that is not what I am looking for. Any help is much appreciated. Thank you! MBR_CONTR_EXT_IDCountIfWhat I want800117684-0011800117800-0021800117800-0022800117805-0021800117818-0021800117921-0011800117979-0011800118080-0021800118080-0022800118207-0011800118291-0011800118294-0011800118308-0041800118308-0042800118528-0011800118627-0011800118730-0021800118746-0031800118747-0051800118747-0052800118747-0053800118797-0051800118797-0052800118797-0053800118797-0054800118797-0055 Read More
My code is not working or MATLAB is not responding?
I’m currently working on designing a dynamic interface, which necessitates taking a cell array input from the user.
I’ve encountered an unexpected behavior while attempting this in MATLAB. Instead of storing the cell array in the workspace, the input statement appears multiple times in the command window.
Even when providing a normal numeric array like 1 2 3 4 5, it fails to work as expected.
surprisingly, there are no visible warnings or errors, leaving me uncertain whether there’s an issue with my code or if MATLAB itself is hanging.
Looking forward for assistance in resolving this issueI’m currently working on designing a dynamic interface, which necessitates taking a cell array input from the user.
I’ve encountered an unexpected behavior while attempting this in MATLAB. Instead of storing the cell array in the workspace, the input statement appears multiple times in the command window.
Even when providing a normal numeric array like 1 2 3 4 5, it fails to work as expected.
surprisingly, there are no visible warnings or errors, leaving me uncertain whether there’s an issue with my code or if MATLAB itself is hanging.
Looking forward for assistance in resolving this issue I’m currently working on designing a dynamic interface, which necessitates taking a cell array input from the user.
I’ve encountered an unexpected behavior while attempting this in MATLAB. Instead of storing the cell array in the workspace, the input statement appears multiple times in the command window.
Even when providing a normal numeric array like 1 2 3 4 5, it fails to work as expected.
surprisingly, there are no visible warnings or errors, leaving me uncertain whether there’s an issue with my code or if MATLAB itself is hanging.
Looking forward for assistance in resolving this issue matlab code, input MATLAB Answers — New Questions
Get File Attachments in Teams Message Extension Plugin.
Hi,
Is it possible to get the attached file content / file url or Can we define parameters with input type as a file in Teams Message Extension. My requirement is I need to upload the attached file in SharePoint document library and perform some other operations.
Hi,Is it possible to get the attached file content / file url or Can we define parameters with input type as a file in Teams Message Extension. My requirement is I need to upload the attached file in SharePoint document library and perform some other operations. Read More
Username showing incorrectly in MS Bookings
Hello,
I have created a new tenant for a customer and during the initial setup I spelt a username wrong. I have since corrected the spelling of the username in Admin Center but on the bookings page, specifically the Book With Me page is still showing the mis spelt name, any ideas how to resolve this ?
Hello, I have created a new tenant for a customer and during the initial setup I spelt a username wrong. I have since corrected the spelling of the username in Admin Center but on the bookings page, specifically the Book With Me page is still showing the mis spelt name, any ideas how to resolve this ? Read More
How to Scale Gradient Field for large z-values?
I want to plot a function R^2 -> R with gradient Field beneath:
f2 = @(x,y) 1./sqrt(x.^2+y.^2);
[u2,v2] = meshgrid(-1:0.01:1);
[du2,dv2] = gradient(f2(u2,v2));
s = surf(u2,v2,f2(u2,v2));
hold on
contour(u2,v2,f2(u2,v2))
hold on
norm = 1./sqrt(du2.^2+dv2.^2);
quiver(u2,v2,du2./norm,dv2./norm,’LineWidth’,2)
axis([-1 1 -1 1 0 10])
caxis([0,10])
colormap(cool)
alpha(s,0.95)
shading flat
Sadly the gradient field is not visible. Probably because it’s too small, f2 get’s too large and I’m lacking of the mathmatical knowledge to adjust it properlyI want to plot a function R^2 -> R with gradient Field beneath:
f2 = @(x,y) 1./sqrt(x.^2+y.^2);
[u2,v2] = meshgrid(-1:0.01:1);
[du2,dv2] = gradient(f2(u2,v2));
s = surf(u2,v2,f2(u2,v2));
hold on
contour(u2,v2,f2(u2,v2))
hold on
norm = 1./sqrt(du2.^2+dv2.^2);
quiver(u2,v2,du2./norm,dv2./norm,’LineWidth’,2)
axis([-1 1 -1 1 0 10])
caxis([0,10])
colormap(cool)
alpha(s,0.95)
shading flat
Sadly the gradient field is not visible. Probably because it’s too small, f2 get’s too large and I’m lacking of the mathmatical knowledge to adjust it properly I want to plot a function R^2 -> R with gradient Field beneath:
f2 = @(x,y) 1./sqrt(x.^2+y.^2);
[u2,v2] = meshgrid(-1:0.01:1);
[du2,dv2] = gradient(f2(u2,v2));
s = surf(u2,v2,f2(u2,v2));
hold on
contour(u2,v2,f2(u2,v2))
hold on
norm = 1./sqrt(du2.^2+dv2.^2);
quiver(u2,v2,du2./norm,dv2./norm,’LineWidth’,2)
axis([-1 1 -1 1 0 10])
caxis([0,10])
colormap(cool)
alpha(s,0.95)
shading flat
Sadly the gradient field is not visible. Probably because it’s too small, f2 get’s too large and I’m lacking of the mathmatical knowledge to adjust it properly gradient MATLAB Answers — New Questions
How to import 2D finite element data from Matlab to Paraview?
Hello everyone!
I have 2D finite element data that are generated in matlab and I am trying to use this code for post-processing in Paraview:
https://www.mathworks.com/matlabcentral/fileexchange/47814-vtkwrite-exports-various-2d-3d-data-to-paraview-in-vtk-file-format.
I have the following matrices:
1) CRD(# of nodes, 2) which gives the 2D coordinates of the nodes,
2) Nodes(# of nodes per element,# of elements) which provides the connectivity between the nodes,
3) U(# of nodes, 2) which gives the x & y velocities per node, and
4) P(# of nodes, 1) which gives the pressure on a node.
However, I am not quite sure how can I put all these in the appropriate form so that they are compatible with the code. I went through several trials but it seems that the data are not saved properly. I would appreciate your help!Hello everyone!
I have 2D finite element data that are generated in matlab and I am trying to use this code for post-processing in Paraview:
https://www.mathworks.com/matlabcentral/fileexchange/47814-vtkwrite-exports-various-2d-3d-data-to-paraview-in-vtk-file-format.
I have the following matrices:
1) CRD(# of nodes, 2) which gives the 2D coordinates of the nodes,
2) Nodes(# of nodes per element,# of elements) which provides the connectivity between the nodes,
3) U(# of nodes, 2) which gives the x & y velocities per node, and
4) P(# of nodes, 1) which gives the pressure on a node.
However, I am not quite sure how can I put all these in the appropriate form so that they are compatible with the code. I went through several trials but it seems that the data are not saved properly. I would appreciate your help! Hello everyone!
I have 2D finite element data that are generated in matlab and I am trying to use this code for post-processing in Paraview:
https://www.mathworks.com/matlabcentral/fileexchange/47814-vtkwrite-exports-various-2d-3d-data-to-paraview-in-vtk-file-format.
I have the following matrices:
1) CRD(# of nodes, 2) which gives the 2D coordinates of the nodes,
2) Nodes(# of nodes per element,# of elements) which provides the connectivity between the nodes,
3) U(# of nodes, 2) which gives the x & y velocities per node, and
4) P(# of nodes, 1) which gives the pressure on a node.
However, I am not quite sure how can I put all these in the appropriate form so that they are compatible with the code. I went through several trials but it seems that the data are not saved properly. I would appreciate your help! paraview, finite element data MATLAB Answers — New Questions
setting an outputport to the function call type in an s function
Hello community.
I am working on a UDP receive block that is used with generated code for an embedded linux platform.
My goal is to have it output the message, message length and a function call output to process the message.
The block setup is currently like this
function sfcn_UDPReceive(block) %setup
tsamp = 1;
buff_len = 2;
%% Register number of input and output ports
block.NumInputPorts = 0;
block.NumOutputPorts = 2;
%% function call
%block.OutputPort(1); %Somehow set this to a function call? C code
%seems to suggest DatatypeID 9 is a function call, but it gives me an
%error when I use it here.
%% message length
block.OutputPort(2).Dimensions = 1;
block.OutputPort(2).DatatypeID = 7; %uint32
block.OutputPort(2).Complexity = ‘Real’;
block.OutputPort(2).SamplingMode = ‘sample’;
%% message
block.OutputPort(3).Dimensions = block.DialogPrm(buff_len).Data;
block.OutputPort(3).DatatypeID = 3; %uint8
block.OutputPort(3).Complexity = ‘Real’;
block.OutputPort(3).SamplingMode = ‘sample’;
% Number of S-Function parameters expected
% (tsamp, buff_len)
block.NumDialogPrms = 2;
block.SampleTimes = [block.DialogPrm(tsamp).Data 0];
block.RegBlockMethod(‘WriteRTW’, @WriteRTW);
end
function WriteRTW(block)
buff_len = 2; % make buff_len available to .tlc file
block.WriteRTWParam(‘string’, ‘buff_len’, num2str(block.DialogPrm(buff_len).Data));
end
How do I set block.OutputPort(1).DatatypeID to fcncall?
I have found examples of how to do it in C, which would then have to be compiled to mex files, but I like this interface being in regular matlab script.
The documentation for doing things this way seems way more scarse than that for the C-mex interface.Hello community.
I am working on a UDP receive block that is used with generated code for an embedded linux platform.
My goal is to have it output the message, message length and a function call output to process the message.
The block setup is currently like this
function sfcn_UDPReceive(block) %setup
tsamp = 1;
buff_len = 2;
%% Register number of input and output ports
block.NumInputPorts = 0;
block.NumOutputPorts = 2;
%% function call
%block.OutputPort(1); %Somehow set this to a function call? C code
%seems to suggest DatatypeID 9 is a function call, but it gives me an
%error when I use it here.
%% message length
block.OutputPort(2).Dimensions = 1;
block.OutputPort(2).DatatypeID = 7; %uint32
block.OutputPort(2).Complexity = ‘Real’;
block.OutputPort(2).SamplingMode = ‘sample’;
%% message
block.OutputPort(3).Dimensions = block.DialogPrm(buff_len).Data;
block.OutputPort(3).DatatypeID = 3; %uint8
block.OutputPort(3).Complexity = ‘Real’;
block.OutputPort(3).SamplingMode = ‘sample’;
% Number of S-Function parameters expected
% (tsamp, buff_len)
block.NumDialogPrms = 2;
block.SampleTimes = [block.DialogPrm(tsamp).Data 0];
block.RegBlockMethod(‘WriteRTW’, @WriteRTW);
end
function WriteRTW(block)
buff_len = 2; % make buff_len available to .tlc file
block.WriteRTWParam(‘string’, ‘buff_len’, num2str(block.DialogPrm(buff_len).Data));
end
How do I set block.OutputPort(1).DatatypeID to fcncall?
I have found examples of how to do it in C, which would then have to be compiled to mex files, but I like this interface being in regular matlab script.
The documentation for doing things this way seems way more scarse than that for the C-mex interface. Hello community.
I am working on a UDP receive block that is used with generated code for an embedded linux platform.
My goal is to have it output the message, message length and a function call output to process the message.
The block setup is currently like this
function sfcn_UDPReceive(block) %setup
tsamp = 1;
buff_len = 2;
%% Register number of input and output ports
block.NumInputPorts = 0;
block.NumOutputPorts = 2;
%% function call
%block.OutputPort(1); %Somehow set this to a function call? C code
%seems to suggest DatatypeID 9 is a function call, but it gives me an
%error when I use it here.
%% message length
block.OutputPort(2).Dimensions = 1;
block.OutputPort(2).DatatypeID = 7; %uint32
block.OutputPort(2).Complexity = ‘Real’;
block.OutputPort(2).SamplingMode = ‘sample’;
%% message
block.OutputPort(3).Dimensions = block.DialogPrm(buff_len).Data;
block.OutputPort(3).DatatypeID = 3; %uint8
block.OutputPort(3).Complexity = ‘Real’;
block.OutputPort(3).SamplingMode = ‘sample’;
% Number of S-Function parameters expected
% (tsamp, buff_len)
block.NumDialogPrms = 2;
block.SampleTimes = [block.DialogPrm(tsamp).Data 0];
block.RegBlockMethod(‘WriteRTW’, @WriteRTW);
end
function WriteRTW(block)
buff_len = 2; % make buff_len available to .tlc file
block.WriteRTWParam(‘string’, ‘buff_len’, num2str(block.DialogPrm(buff_len).Data));
end
How do I set block.OutputPort(1).DatatypeID to fcncall?
I have found examples of how to do it in C, which would then have to be compiled to mex files, but I like this interface being in regular matlab script.
The documentation for doing things this way seems way more scarse than that for the C-mex interface. level 2 s-function, simulink MATLAB Answers — New Questions
Copilot for M365 Chat (Graph and Web-grounding) and data processing in States
Hey,
Web plugin in Copilot for M365 Graph-grounded Chat will be ON by default in near future. Copilot in other applications also uses web-grounding (and cannot be turned of without tenant level restriction).
Microsoft documentation states that Copilot (Commercial data protection) chat might process data in States.
Does the statement also apply in Copilot for M365 Web-grounded chat and other applications?
“To provide chat responses, Copilot uses global data centers for processing and may process data in the United States. Optional, Bing-backed connected experiences don’t fall under Microsoft’s EU Data Boundary (EUDB) commitment.” (Copilot Privacy and Protections | Microsoft Learn).
Some companys dont want any of their data leaving EU data Boundary. Is this something we must be conserned?
Thanks for your reply in advance!
Hey,Web plugin in Copilot for M365 Graph-grounded Chat will be ON by default in near future. Copilot in other applications also uses web-grounding (and cannot be turned of without tenant level restriction). Microsoft documentation states that Copilot (Commercial data protection) chat might process data in States.Does the statement also apply in Copilot for M365 Web-grounded chat and other applications? “To provide chat responses, Copilot uses global data centers for processing and may process data in the United States. Optional, Bing-backed connected experiences don’t fall under Microsoft’s EU Data Boundary (EUDB) commitment.” (Copilot Privacy and Protections | Microsoft Learn). Some companys dont want any of their data leaving EU data Boundary. Is this something we must be conserned? Thanks for your reply in advance! Read More
VBA – Retrieve emails Attachment & Download
Hi Everyone,
I have a big task and I don’t know if this can be done through VBA. Let me explain what I need to be done.
1. I have several clients that I setup an email address through Exchange server (not my personal outlook). with a password.
2. Then I have several customers that sending email attachment for that particular client. Let say one of the client’s name Troy Corporation and the email will be email address removed for privacy reasons.
The customer’s name is: Daybreak Fast, FedEx Freight, R&L Carriers, and TRN Logistics. All the customers are sending email attachment into Troy Corporation mailbox. Side Note: (sometimes I have different customer send the attached file. Let say this I have this week Mr. email address removed for privacy reasons and next week I have Mrs. email address removed for privacy reasons I need the program to check for both emails to see if one of them send me a file.
What I need is to do is login to mailbox (Troy Corporation) retrieve each email with the attached file for each customer, then download them to my network folder. If I did not receive an attachment for any of the customer to send them a second request with a note on the body “we did not receive your file” something like that.
3. So, when I login for second time to retrieve the remaining attached file. But if I did receive the email attachment either on the first or the second attempt, the customer SHOULD NOT RECEIVE a second request because I did receive their file.
I do have more after all the files are download to my network folder. But I want to know if this can be done through VBA. OR if cannot be done through VBA, which program do you think is the best to be done with?
Thank you an advanced!
Hi Everyone,I have a big task and I don’t know if this can be done through VBA. Let me explain what I need to be done.1. I have several clients that I setup an email address through Exchange server (not my personal outlook). with a password.2. Then I have several customers that sending email attachment for that particular client. Let say one of the client’s name Troy Corporation and the email will be email address removed for privacy reasons. The customer’s name is: Daybreak Fast, FedEx Freight, R&L Carriers, and TRN Logistics. All the customers are sending email attachment into Troy Corporation mailbox. Side Note: (sometimes I have different customer send the attached file. Let say this I have this week Mr. email address removed for privacy reasons and next week I have Mrs. email address removed for privacy reasons I need the program to check for both emails to see if one of them send me a file.What I need is to do is login to mailbox (Troy Corporation) retrieve each email with the attached file for each customer, then download them to my network folder. If I did not receive an attachment for any of the customer to send them a second request with a note on the body “we did not receive your file” something like that.3. So, when I login for second time to retrieve the remaining attached file. But if I did receive the email attachment either on the first or the second attempt, the customer SHOULD NOT RECEIVE a second request because I did receive their file.I do have more after all the files are download to my network folder. But I want to know if this can be done through VBA. OR if cannot be done through VBA, which program do you think is the best to be done with?Thank you an advanced! Read More
Why I am Getting QuickBooks Desktop Error 6000?
Troubleshooting Solutions: QuickBooks Desktop Error 6000
QuickBooks error 6000 series typically relates to issues with company file access, and error 6000 is a common one that users encounter. This error can stem from various causes, such as network issues, file corruption, or improper folder permissions. However, resolving this error is essential to continue working smoothly with QuickBooks Desktop. Here are some troubleshooting steps to help resolve QuickBooks desktop error 6000:
Verify File Location: Start by ensuring that the company file is stored in the correct location. It should ideally be saved on a local drive rather than a network location. If it’s on a network, copy it to a local drive and attempt to open it from there.Rename .ND and .TLG Files: .ND (Network Data) and .TLG (Transaction Log) files are configuration files that QuickBooks uses to access the company file. Renaming these files can sometimes resolve connectivity issues. Locate these files in the folder containing the company file and add “.old” at the end of each file name (e.g., company_file.qbw.nd.old).Use QuickBooks File Doctor: QuickBooks File Doctor is a tool designed to diagnose and repair various company file-related issues. Download and install the tool from the Intuit website, then run it to scan for and fix errors related to error 6000.Check Folder Permissions: Ensure that the folder containing the company file has the correct permissions set for all users. QuickBooks requires read/write access to the folder and file. Right-click on the folder, select Properties, and navigate to the Security tab to adjust permissions if necessary.Disable Hosting on Workstations: If QuickBooks is being used in a multi-user environment, ensure that hosting is disabled on workstations. Only the server or host computer should have hosting enabled. Open QuickBooks, go to File > Utilities, and select Stop Hosting Multi-User Access on each workstation.Configure Firewall and Antivirus Settings: Firewalls and antivirus software can sometimes block QuickBooks from accessing the company file, leading to error 6000. Configure your firewall and antivirus settings to allow QuickBooks through. You may need to add QuickBooks as an exception or whitelist it.Restore a Backup: If none of the above solutions work, restoring a backup of the company file may be necessary. Ensure that you have a recent backup available and restore it using the File > Open or Restore Company option in QuickBooks.Seek Professional Help: If you’re unable to resolve QuickBooks error 6000 on your own, it may be time to seek assistance from a QuickBooks expert or Intuit support. They can provide advanced troubleshooting steps or tools specific to your situation.
By following these troubleshooting solutions, you should be able to resolve QuickBooks desktop error 6000 and regain access to your company file without further disruption to your workflow.
Troubleshooting Solutions: QuickBooks Desktop Error 6000QuickBooks error 6000 series typically relates to issues with company file access, and error 6000 is a common one that users encounter. This error can stem from various causes, such as network issues, file corruption, or improper folder permissions. However, resolving this error is essential to continue working smoothly with QuickBooks Desktop. Here are some troubleshooting steps to help resolve QuickBooks desktop error 6000:Verify File Location: Start by ensuring that the company file is stored in the correct location. It should ideally be saved on a local drive rather than a network location. If it’s on a network, copy it to a local drive and attempt to open it from there.Rename .ND and .TLG Files: .ND (Network Data) and .TLG (Transaction Log) files are configuration files that QuickBooks uses to access the company file. Renaming these files can sometimes resolve connectivity issues. Locate these files in the folder containing the company file and add “.old” at the end of each file name (e.g., company_file.qbw.nd.old).Use QuickBooks File Doctor: QuickBooks File Doctor is a tool designed to diagnose and repair various company file-related issues. Download and install the tool from the Intuit website, then run it to scan for and fix errors related to error 6000.Check Folder Permissions: Ensure that the folder containing the company file has the correct permissions set for all users. QuickBooks requires read/write access to the folder and file. Right-click on the folder, select Properties, and navigate to the Security tab to adjust permissions if necessary.Disable Hosting on Workstations: If QuickBooks is being used in a multi-user environment, ensure that hosting is disabled on workstations. Only the server or host computer should have hosting enabled. Open QuickBooks, go to File > Utilities, and select Stop Hosting Multi-User Access on each workstation.Configure Firewall and Antivirus Settings: Firewalls and antivirus software can sometimes block QuickBooks from accessing the company file, leading to error 6000. Configure your firewall and antivirus settings to allow QuickBooks through. You may need to add QuickBooks as an exception or whitelist it.Restore a Backup: If none of the above solutions work, restoring a backup of the company file may be necessary. Ensure that you have a recent backup available and restore it using the File > Open or Restore Company option in QuickBooks.Seek Professional Help: If you’re unable to resolve QuickBooks error 6000 on your own, it may be time to seek assistance from a QuickBooks expert or Intuit support. They can provide advanced troubleshooting steps or tools specific to your situation.By following these troubleshooting solutions, you should be able to resolve QuickBooks desktop error 6000 and regain access to your company file without further disruption to your workflow. Read More
Outlook for Mac: Unable to send message immediately
Hi,
Since this morning, Outlook (Microsoft 365 version updated to the latest version) no longer allows me to send email messages immediately, but only offers the “schedule sending” option. Furthermore, it doesn’t allow me to schedule the sending for today, but only for tomorrow.
The version of Outlook used is the Legacy version.
This problem does not occur on the “current” version.
I have already tried restarting both outlook and the entire system, but the situation has not changed.
The problem does not occur using the web version of Outlook.
Hi, Since this morning, Outlook (Microsoft 365 version updated to the latest version) no longer allows me to send email messages immediately, but only offers the “schedule sending” option. Furthermore, it doesn’t allow me to schedule the sending for today, but only for tomorrow.The version of Outlook used is the Legacy version.This problem does not occur on the “current” version.I have already tried restarting both outlook and the entire system, but the situation has not changed.The problem does not occur using the web version of Outlook. Read More
We could not fulfil your request
Hi, my company would like to use Bookings so that our clients can book a meeting with us through Bookings without backwarding and forwarding email. However, it shows “We could not fulfil your request” in some situation when someone book via Bookings. We do not want our client to face this situation, and we would like to ask how can we prevent it from happening?
Hi, my company would like to use Bookings so that our clients can book a meeting with us through Bookings without backwarding and forwarding email. However, it shows “We could not fulfil your request” in some situation when someone book via Bookings. We do not want our client to face this situation, and we would like to ask how can we prevent it from happening? Read More
Azure AI for Organization data. How to refer to the file names in prompts to get response
Hi
I went through Azure AI documentation to come up with ChatGPT like feature using Azure AI services for my data set.
I have created Azure Storage account and container to store my files. Created the deployment with GPT3.5 turbo model. Linked the container as source.
I could able to get the response for the prompts.
However, I would like to be more precise to get the answers from a given file uploaded, instead of referring to all the files.
I tried prompts like–
‘Refer to “abc.txt”, and generate the summary’,
‘Consider file with name “abc.txt”, get me the entities from this file’.
Unfortunately, I dont get the relevant response. I see model is not able to identify my reference file in the prompt.
Can you tell me how to ask or refer a file to get responses from that file in the prompt.
Do I need to use fields in indexe. I used fields “title” and “filepath” that gets generated automatically. Still no luck.
Can you help me here please.
HiI went through Azure AI documentation to come up with ChatGPT like feature using Azure AI services for my data set. I have created Azure Storage account and container to store my files. Created the deployment with GPT3.5 turbo model. Linked the container as source. I could able to get the response for the prompts. However, I would like to be more precise to get the answers from a given file uploaded, instead of referring to all the files.I tried prompts like–‘Refer to “abc.txt”, and generate the summary’,’Consider file with name “abc.txt”, get me the entities from this file’. Unfortunately, I dont get the relevant response. I see model is not able to identify my reference file in the prompt. Can you tell me how to ask or refer a file to get responses from that file in the prompt. Do I need to use fields in indexe. I used fields “title” and “filepath” that gets generated automatically. Still no luck. Can you help me here please. Read More
Android Mobile Sharepoint App – Power Apps added to Page’s always give me a “refresh browser” error
When using the Sharepoint mobile app whenever I navigate to a page with a power apps on it – I always get a “Refresh browser or try again later” error as soon as I click “Sign in”
Does anyone else experience this?
When using the Sharepoint mobile app whenever I navigate to a page with a power apps on it – I always get a “Refresh browser or try again later” error as soon as I click “Sign in” Does anyone else experience this? Read More
Multiple hierarchies in pivot table rows but showing in separate columns
Hello,
we are trying to find a solution for the following problem statement using hierarchies in Excel Pivot Tables. I hope the excel community can help with solutions or suggestions.
Problem Statement:
Challenge arise while using multiple hierarchies in Pivot Tables from PBI Semantic Model. Please consider below scenario for complete understanding.
Scenario:
Following are the two dimensions with the hierarchies for both.
GL AccountCost Center
Expectation:
Once the GL Account Hierarchy & Cost Center Hierarchy are dragged and dropped into the rows section of the pivot table fields, GL Account and Cost Center are nested within the same column A. Please refer to below screenshot where it puts both of them in one column.
We might switch to the tabular option, but that doesn’t completely fix the problem because it adds more columns based on the levels of the leaf nodes. It becomes more difficult to use the spreadsheet for analysis with so many columns. In fact, there are certain cases where Cost Centers have 7 hierarchy nodes.
The ideal solution is shown in the screenshot below, coming from another reporting tool:
Do you think a similar layout can be developed in a Excel Pivot table? Where separate hierarchies unfold in independently in separate columns?
Please if you need clarifications or extra info to understand better, feel free to post and I will update.
Thanks in advance.
Hello,we are trying to find a solution for the following problem statement using hierarchies in Excel Pivot Tables. I hope the excel community can help with solutions or suggestions. Problem Statement:Challenge arise while using multiple hierarchies in Pivot Tables from PBI Semantic Model. Please consider below scenario for complete understanding.Scenario:Following are the two dimensions with the hierarchies for both.GL AccountCost CenterExpectation:Once the GL Account Hierarchy & Cost Center Hierarchy are dragged and dropped into the rows section of the pivot table fields, GL Account and Cost Center are nested within the same column A. Please refer to below screenshot where it puts both of them in one column. We might switch to the tabular option, but that doesn’t completely fix the problem because it adds more columns based on the levels of the leaf nodes. It becomes more difficult to use the spreadsheet for analysis with so many columns. In fact, there are certain cases where Cost Centers have 7 hierarchy nodes.The ideal solution is shown in the screenshot below, coming from another reporting tool: Do you think a similar layout can be developed in a Excel Pivot table? Where separate hierarchies unfold in independently in separate columns?Please if you need clarifications or extra info to understand better, feel free to post and I will update.Thanks in advance. Read More
Export to Excel Removes Spaces Before Links
I have exported a List from SharePoint to Excel. The list is a glossary of terms and the terms link to other terms in the list.
In the exported spreadsheet, there isn’t a space between words when the second word is a linked word. For example, if the sentence says: “A new software package” and “software” has a link, the spreadsheet has it as: “A newsoftware package.”
I have 800+ items in this glossary and hundreds of links, so I am editing every single item manually in the spreadsheet to add the spaces between the words. I am not looking forward to having to do all of this manual work each time I export!
Anyone have any ideas how I can change/fix this so it doesn’t happen in the first place – or an easier way to fix them in the spreadsheet?
I have exported a List from SharePoint to Excel. The list is a glossary of terms and the terms link to other terms in the list.In the exported spreadsheet, there isn’t a space between words when the second word is a linked word. For example, if the sentence says: “A new software package” and “software” has a link, the spreadsheet has it as: “A newsoftware package.”I have 800+ items in this glossary and hundreds of links, so I am editing every single item manually in the spreadsheet to add the spaces between the words. I am not looking forward to having to do all of this manual work each time I export!Anyone have any ideas how I can change/fix this so it doesn’t happen in the first place – or an easier way to fix them in the spreadsheet? Read More