Category: News
Tenant restricted from sending email
Hello
Please i need your help on this issue.
We have received alert that our email service has been barred “Tenant restricted from sending email”. Last night we had issue, and this might have contributed to large number of email alerts generated from platform. Could this service be restored at earliest.
Here is the error message of the email we received:
Then when trying to send an email i get this error message below:
Hello Please i need your help on this issue. We have received alert that our email service has been barred “Tenant restricted from sending email”. Last night we had issue, and this might have contributed to large number of email alerts generated from platform. Could this service be restored at earliest. Here is the error message of the email we received: Then when trying to send an email i get this error message below: Read More
Check and confirm a member of a DL received an email
Hello Microsoft Family,We have an important member reporting another VIP member of a DL not having received an important email sent to a DL.How do I know and where do I check, using which tool I should operate this search to 100% confirm the person received, or not at all received?And how do I know who all received and who all not receiving the email sent to a DL?I believe this same method of confirmation will apply to a mail sent to a Group, or Shared mailbox. If it’s not, how about checking for shared-mailbox, and group?Thank you in advance to all of you for taking your precious time to help me.Kind regardsVan Read More
Not able to load the exported MATLAB DL model in TensorFlow
I have use exportNetwork command and got a folder named myModel which contains 4 files init.py, readme.txt, model.py, and weights.h5.
No according to matlab documentation: myModel folder is a package. So we can do
"import myModel
model = myModel.load_model()"
But if i am doing this i am getting error: "ModuleNotFoundError: No module named ‘myModel’"
I am running on colab so what i did is: i uploaded the myModel folder in my drive and then i mounted drive. But not able to install that package. How to load such exported model in python please tell us clearly.
I have tried to make the model using ‘model.py’ code. But then when i am trying to load the weights using kers command:
model = create_model()
weight_path=’/content/drive/MyDrive/VGGish_Arka/weights.h5′
model.load_weights(weight_path)
Error is: "ValueError: Layer count mismatch when loading weights from file. Model expected 9 layers, found 0 saved layers."I have use exportNetwork command and got a folder named myModel which contains 4 files init.py, readme.txt, model.py, and weights.h5.
No according to matlab documentation: myModel folder is a package. So we can do
"import myModel
model = myModel.load_model()"
But if i am doing this i am getting error: "ModuleNotFoundError: No module named ‘myModel’"
I am running on colab so what i did is: i uploaded the myModel folder in my drive and then i mounted drive. But not able to install that package. How to load such exported model in python please tell us clearly.
I have tried to make the model using ‘model.py’ code. But then when i am trying to load the weights using kers command:
model = create_model()
weight_path=’/content/drive/MyDrive/VGGish_Arka/weights.h5′
model.load_weights(weight_path)
Error is: "ValueError: Layer count mismatch when loading weights from file. Model expected 9 layers, found 0 saved layers." I have use exportNetwork command and got a folder named myModel which contains 4 files init.py, readme.txt, model.py, and weights.h5.
No according to matlab documentation: myModel folder is a package. So we can do
"import myModel
model = myModel.load_model()"
But if i am doing this i am getting error: "ModuleNotFoundError: No module named ‘myModel’"
I am running on colab so what i did is: i uploaded the myModel folder in my drive and then i mounted drive. But not able to install that package. How to load such exported model in python please tell us clearly.
I have tried to make the model using ‘model.py’ code. But then when i am trying to load the weights using kers command:
model = create_model()
weight_path=’/content/drive/MyDrive/VGGish_Arka/weights.h5′
model.load_weights(weight_path)
Error is: "ValueError: Layer count mismatch when loading weights from file. Model expected 9 layers, found 0 saved layers." deep learning, exportnetwork, vggish, audio, tensorflow MATLAB Answers — New Questions
Why is the sky blue?
This is a list of stepsStep 1 Step 1a Step 2
A = ones(1,4);B = zeros(1,4);C = [A B]
Restarted StepThis is a list of stepsStep 1 Step 1a Step 2
A = ones(1,4);B = zeros(1,4);C = [A B]
Restarted Step This is a list of stepsStep 1 Step 1a Step 2
A = ones(1,4);B = zeros(1,4);C = [A B]
Restarted Step test, next, and, another MATLAB Answers — New Questions
How to calculate maximum distance between two points (coordinates) on a XY (2D) plane ?
I am plotting two vectors (x and y), i.e. plot x vs. y.
I want to calculate distance between points which are furthest away from each other. I also need their indices to reference a time stamp.
Using pdist2 I get the pink line, but the black line (annotation) seem to be the actual largest distance.I am plotting two vectors (x and y), i.e. plot x vs. y.
I want to calculate distance between points which are furthest away from each other. I also need their indices to reference a time stamp.
Using pdist2 I get the pink line, but the black line (annotation) seem to be the actual largest distance. I am plotting two vectors (x and y), i.e. plot x vs. y.
I want to calculate distance between points which are furthest away from each other. I also need their indices to reference a time stamp.
Using pdist2 I get the pink line, but the black line (annotation) seem to be the actual largest distance. pdist2, pdist, xy, maximum distance MATLAB Answers — New Questions
What’s New in Excel (April 2024)
Welcome to the April 2024 update.
Generating multiple formula columns, creating complex formula columns that span across multiple tables, and new ways to engage with Copilot in Excel are now available to Excel users on web and Windows. Copying and pasting improvements and sharing links to sheet views are also available in Excel for the web, and the ink to text pen is rolling out to Insiders running Excel for Windows.
Excel for Web:
Generating multiple formula columns with Copilot in Excel
Creating complex formula columns that span multiple tables with Copilot in Excel
Copying and pasting Improvements #FIA
Sharing link to sheet views #FIA
Excel for Windows:
Generating multiple formula columns with Copilot in Excel
Creating complex formula columns that span multiple tables with Copilot in Excel
New ways to engage with Copilot in Excel
Ink to text pen (Insiders)
Excel for Web
1. Generating multiple formula columns with Copilot in Excel
Copilot in Excel now supports generating multiple formula columns from a single prompt. Ask one question, and Copilot can return two formula columns simultaneously. For instance, you can extract both the first name and last name from a single prompt, neatly separating the information into distinct columns. Read more here.
2. Creating complex formula columns that span multiple tables with Copilot in Excel
Additionally, now you can use Copilot to create complex formula columns that span across multiple tables, utilizing functions like XLOOKUP and SUMIF. This capability streamlines data processing and empowers you to handle more complex data analysis tasks efficiently, even when using multiple tables. Read more here.
#FIA
3. Copying and pasting improvements
Based on feedback we’ve received from many of you, we’ve made the following improvements to the copying and pasting experience:
Drag and Drop Enhancements: Provides a more seamless and intuitive way to manipulate data.
Autofill: Enables you to drag data to fill series, copy cells, and split data.
Paste options improvements: Allows you to choose the right paste option for your needs by right-clicking or accessing the auto-recovery paste options.
#FIA
4. Sharing link to sheet views
You can now share a link to a Sheet view that captures a subset of a workbook’s contents. This new capability can help you more efficiently collaborate on large, complex workbooks and more easily gather feedback and input from others. Read more here >
Excel for Windows
1. Generating multiple formula columns with Copilot in Excel
Copilot in Excel now supports generating multiple formula columns from a single prompt. Ask one question, and Copilot can return two formula columns simultaneously. For instance, you can extract both the first name and last name from a single prompt, neatly separating the information into distinct columns. Read more here.
2. Creating complex formula columns that span multiple tables with Copilot in Excel
Additionally, now you can use Copilot to create complex formula columns that span across multiple tables, utilizing functions like XLOOKUP and SUMIF. This capability streamlines data processing and empowers you to handle more complex data analysis tasks efficiently, even when using multiple tables. Read more here.
3. New ways to engage with Copilot in Excel
We’ve enhanced Copilot in Excel to make the experience even more seamless and efficient. Now, with Copilot in Excel, you can use the Microphone feature to prompt Copilot verbally, eliminating the need for manual typing. In addition, for fresh prompt ideas tailored to your specific data, now you can select the View Prompts icon to explore the Prompt Guide in the chat pane.. This feature is currently rolling out to Windows users. Read more here.
(Note: Copilot in Excel is currently in preview. Learn more about Copilot in Excel here.)
4. Ink to text pen (Insiders)
The Ink to Text Pen lets you use your digital pen (or stylus) to automatically convert your handwriting into text as you go, helping you quickly enter content into cells. Additionally, you can use pen gestures to select and delete cell content.
NOTE: The Ink to Text Pen replaces the functionality of the Action Pen in Excel.
Read more here >
Check if a specific feature is in your version of Excel
Click here to open in a new browser tab
Your feedback helps shape the future of Excel. Please let us know how you like a particular feature and what we can improve upon—“Give a compliment” or “Make a suggestion”.. You can also submit new ideas or vote for other ideas via Microsoft Feedback.
Subscribe to our Excel Blog and the Insiders Blog to get the latest updates. Stay connected with us and other Excel fans around the world – join our Excel Community and follow us on X, formerly Twitter.
Special thanks to our Excel MVPs David Benaim and Bill Jelen for their contribution to this month’s What’s New in Excel article. David publishes weekly YouTube videos and regular LinkedIn posts about the latest innovations in Excel and more. Bill is the founder and host of MrExcel.com and the author of several books about Excel.
Microsoft Tech Community – Latest Blogs –Read More
Hamming Code Encode Error
How to correct the following error?
Unable to resolve the name ‘comm.HammingEncoder’.
Error in Finalcomputerassignment (line 75)
enc = comm.HammingEncoder;
clc;
clear all;
% Load the ‘lenna’ image
lenna = imread(‘lenna.png’);
% Convert the image to grayscale
lenna_gray = rgb2gray(lenna);
% Convert pixel values to bits
lenna_bits = reshape(de2bi(lenna_gray, 8, ‘left-msb’), [], 1);
% Define Eb/No values for low and high SNR
Eb_No_low = 0;
Eb_No_high = 4;
% Modulate using BPSK
modulated_signal = pskmod(lenna_bits, 2);
% Calculate SNR values for low and high SNR, taking into account the noise power in BPSK
% For BPSK, the bit energy is the same as the symbol energy since there is one bit per symbol
SNR_low = Eb_No_low + 10*log10(1);
SNR_high = Eb_No_high + 10*log10(1);
% Transmit and receive at low SNR
received_low = awgn(modulated_signal, SNR_low, ‘measured’);
% Demodulate received signal at low SNR
demodulated_low = pskdemod(received_low, 2);
% Transmit and receive at high SNR
received_high = awgn(modulated_signal, SNR_high, ‘measured’);
% Demodulate received signal at high SNR
demodulated_high = pskdemod(received_high, 2);
% Reshape demodulated bits to original image size
szin = size(lenna_gray,1:2);
decoded_image_low = reshape(demodulated_low, [], 8);
decoded_image_low = uint8(bi2de(decoded_image_low, ‘left-msb’));
decoded_image_low = reshape(decoded_image_low, szin);
decoded_image_high = reshape(demodulated_high, [], 8);
decoded_image_high = uint8(bi2de(decoded_image_high, ‘left-msb’));
decoded_image_high = reshape(decoded_image_high, szin);
% Employ a linear error detection code (only detection and no correction)
% Calculate and display Bit Error Rate (BER)
ber_low = sum(abs(double(lenna_bits) – double(demodulated_low))) / length(lenna_bits);
ber_high = sum(abs(double(lenna_bits) – double(demodulated_high))) / length(lenna_bits);
fprintf(‘BER at low SNR (0 dB): %fn’, ber_low);
fprintf(‘BER at high SNR (4 dB): %fn’, ber_high);
% Plot original, received image at 0 dB SNR, and received image at 4 dB SNR
figure(‘Position’, [100, 100, 1200, 400]);
% Original Image
subplot(1, 3, 1);
imshow(lenna_gray);
title(‘Original Image’);
% Received Image at 0 dB SNR
subplot(1, 3, 2);
imshow(decoded_image_low);
title(‘Received Image (0 dB SNR)’);
% Received Image at 4 dB SNR
subplot(1, 3, 3);
imshow(decoded_image_high);
title(‘Received Image (4 dB SNR)’);
% Task 3: Use an error correction code using syndrome lookup table
% Error correction code
% Let’s use a (7, 4) Hamming code
enc = comm.HammingEncoder;
dec = comm.HammingDecoder;
% Corrected images at 0 dB and 4 dB SNR
corrected_img_low = correct_image(received_signal_low, enc, dec);
corrected_img_high = correct_image(received_signal_high, enc, dec);
% Display corrected images
figure;
subplot(1,2,1);
imshow(corrected_img_low, []);
title(‘Corrected Image (0 dB SNR)’);
subplot(1,2,2);
imshow(corrected_img_high, []);
title(‘Corrected Image (4 dB SNR)’);
% Function to correct image using error correction code
function corrected_img = correct_image(received_signal, enc, dec)
% BPSK demodulation
demodulated_bits = sign(received_signal);
% Perform error detection and correction
detected_bits = step(dec, demodulated_bits);
% Convert bits back to image
corrected_img = reshape((detected_bits + 1) / 2, 8, []).’;
endHow to correct the following error?
Unable to resolve the name ‘comm.HammingEncoder’.
Error in Finalcomputerassignment (line 75)
enc = comm.HammingEncoder;
clc;
clear all;
% Load the ‘lenna’ image
lenna = imread(‘lenna.png’);
% Convert the image to grayscale
lenna_gray = rgb2gray(lenna);
% Convert pixel values to bits
lenna_bits = reshape(de2bi(lenna_gray, 8, ‘left-msb’), [], 1);
% Define Eb/No values for low and high SNR
Eb_No_low = 0;
Eb_No_high = 4;
% Modulate using BPSK
modulated_signal = pskmod(lenna_bits, 2);
% Calculate SNR values for low and high SNR, taking into account the noise power in BPSK
% For BPSK, the bit energy is the same as the symbol energy since there is one bit per symbol
SNR_low = Eb_No_low + 10*log10(1);
SNR_high = Eb_No_high + 10*log10(1);
% Transmit and receive at low SNR
received_low = awgn(modulated_signal, SNR_low, ‘measured’);
% Demodulate received signal at low SNR
demodulated_low = pskdemod(received_low, 2);
% Transmit and receive at high SNR
received_high = awgn(modulated_signal, SNR_high, ‘measured’);
% Demodulate received signal at high SNR
demodulated_high = pskdemod(received_high, 2);
% Reshape demodulated bits to original image size
szin = size(lenna_gray,1:2);
decoded_image_low = reshape(demodulated_low, [], 8);
decoded_image_low = uint8(bi2de(decoded_image_low, ‘left-msb’));
decoded_image_low = reshape(decoded_image_low, szin);
decoded_image_high = reshape(demodulated_high, [], 8);
decoded_image_high = uint8(bi2de(decoded_image_high, ‘left-msb’));
decoded_image_high = reshape(decoded_image_high, szin);
% Employ a linear error detection code (only detection and no correction)
% Calculate and display Bit Error Rate (BER)
ber_low = sum(abs(double(lenna_bits) – double(demodulated_low))) / length(lenna_bits);
ber_high = sum(abs(double(lenna_bits) – double(demodulated_high))) / length(lenna_bits);
fprintf(‘BER at low SNR (0 dB): %fn’, ber_low);
fprintf(‘BER at high SNR (4 dB): %fn’, ber_high);
% Plot original, received image at 0 dB SNR, and received image at 4 dB SNR
figure(‘Position’, [100, 100, 1200, 400]);
% Original Image
subplot(1, 3, 1);
imshow(lenna_gray);
title(‘Original Image’);
% Received Image at 0 dB SNR
subplot(1, 3, 2);
imshow(decoded_image_low);
title(‘Received Image (0 dB SNR)’);
% Received Image at 4 dB SNR
subplot(1, 3, 3);
imshow(decoded_image_high);
title(‘Received Image (4 dB SNR)’);
% Task 3: Use an error correction code using syndrome lookup table
% Error correction code
% Let’s use a (7, 4) Hamming code
enc = comm.HammingEncoder;
dec = comm.HammingDecoder;
% Corrected images at 0 dB and 4 dB SNR
corrected_img_low = correct_image(received_signal_low, enc, dec);
corrected_img_high = correct_image(received_signal_high, enc, dec);
% Display corrected images
figure;
subplot(1,2,1);
imshow(corrected_img_low, []);
title(‘Corrected Image (0 dB SNR)’);
subplot(1,2,2);
imshow(corrected_img_high, []);
title(‘Corrected Image (4 dB SNR)’);
% Function to correct image using error correction code
function corrected_img = correct_image(received_signal, enc, dec)
% BPSK demodulation
demodulated_bits = sign(received_signal);
% Perform error detection and correction
detected_bits = step(dec, demodulated_bits);
% Convert bits back to image
corrected_img = reshape((detected_bits + 1) / 2, 8, []).’;
end How to correct the following error?
Unable to resolve the name ‘comm.HammingEncoder’.
Error in Finalcomputerassignment (line 75)
enc = comm.HammingEncoder;
clc;
clear all;
% Load the ‘lenna’ image
lenna = imread(‘lenna.png’);
% Convert the image to grayscale
lenna_gray = rgb2gray(lenna);
% Convert pixel values to bits
lenna_bits = reshape(de2bi(lenna_gray, 8, ‘left-msb’), [], 1);
% Define Eb/No values for low and high SNR
Eb_No_low = 0;
Eb_No_high = 4;
% Modulate using BPSK
modulated_signal = pskmod(lenna_bits, 2);
% Calculate SNR values for low and high SNR, taking into account the noise power in BPSK
% For BPSK, the bit energy is the same as the symbol energy since there is one bit per symbol
SNR_low = Eb_No_low + 10*log10(1);
SNR_high = Eb_No_high + 10*log10(1);
% Transmit and receive at low SNR
received_low = awgn(modulated_signal, SNR_low, ‘measured’);
% Demodulate received signal at low SNR
demodulated_low = pskdemod(received_low, 2);
% Transmit and receive at high SNR
received_high = awgn(modulated_signal, SNR_high, ‘measured’);
% Demodulate received signal at high SNR
demodulated_high = pskdemod(received_high, 2);
% Reshape demodulated bits to original image size
szin = size(lenna_gray,1:2);
decoded_image_low = reshape(demodulated_low, [], 8);
decoded_image_low = uint8(bi2de(decoded_image_low, ‘left-msb’));
decoded_image_low = reshape(decoded_image_low, szin);
decoded_image_high = reshape(demodulated_high, [], 8);
decoded_image_high = uint8(bi2de(decoded_image_high, ‘left-msb’));
decoded_image_high = reshape(decoded_image_high, szin);
% Employ a linear error detection code (only detection and no correction)
% Calculate and display Bit Error Rate (BER)
ber_low = sum(abs(double(lenna_bits) – double(demodulated_low))) / length(lenna_bits);
ber_high = sum(abs(double(lenna_bits) – double(demodulated_high))) / length(lenna_bits);
fprintf(‘BER at low SNR (0 dB): %fn’, ber_low);
fprintf(‘BER at high SNR (4 dB): %fn’, ber_high);
% Plot original, received image at 0 dB SNR, and received image at 4 dB SNR
figure(‘Position’, [100, 100, 1200, 400]);
% Original Image
subplot(1, 3, 1);
imshow(lenna_gray);
title(‘Original Image’);
% Received Image at 0 dB SNR
subplot(1, 3, 2);
imshow(decoded_image_low);
title(‘Received Image (0 dB SNR)’);
% Received Image at 4 dB SNR
subplot(1, 3, 3);
imshow(decoded_image_high);
title(‘Received Image (4 dB SNR)’);
% Task 3: Use an error correction code using syndrome lookup table
% Error correction code
% Let’s use a (7, 4) Hamming code
enc = comm.HammingEncoder;
dec = comm.HammingDecoder;
% Corrected images at 0 dB and 4 dB SNR
corrected_img_low = correct_image(received_signal_low, enc, dec);
corrected_img_high = correct_image(received_signal_high, enc, dec);
% Display corrected images
figure;
subplot(1,2,1);
imshow(corrected_img_low, []);
title(‘Corrected Image (0 dB SNR)’);
subplot(1,2,2);
imshow(corrected_img_high, []);
title(‘Corrected Image (4 dB SNR)’);
% Function to correct image using error correction code
function corrected_img = correct_image(received_signal, enc, dec)
% BPSK demodulation
demodulated_bits = sign(received_signal);
% Perform error detection and correction
detected_bits = step(dec, demodulated_bits);
% Convert bits back to image
corrected_img = reshape((detected_bits + 1) / 2, 8, []).’;
end hamming code error MATLAB Answers — New Questions
Aerodynamic forces and moments
In the "Aerodynamic Forces and Moments" block, are the x/y/z forces assumed to act at the CG (such that the resulting moment from the forces acting at another point would need to be included in the moment coefficient about each axis)?In the "Aerodynamic Forces and Moments" block, are the x/y/z forces assumed to act at the CG (such that the resulting moment from the forces acting at another point would need to be included in the moment coefficient about each axis)? In the "Aerodynamic Forces and Moments" block, are the x/y/z forces assumed to act at the CG (such that the resulting moment from the forces acting at another point would need to be included in the moment coefficient about each axis)? aerodynamic forces MATLAB Answers — New Questions
Find the result of factorial N entered from keyboard and displaying the result in 3 decimals with an expression “the result is found as …….
import math
N = int(input("Enter a number: "))
fact = math.factorial(N)
result = round(fact, 3)
print(f"the result is found as {result}")import math
N = int(input("Enter a number: "))
fact = math.factorial(N)
result = round(fact, 3)
print(f"the result is found as {result}") import math
N = int(input("Enter a number: "))
fact = math.factorial(N)
result = round(fact, 3)
print(f"the result is found as {result}") find the result of factorial n entered from keyboa MATLAB Answers — New Questions
char array to numeric array
Hi,
I generated a datafile which has numeric values, but in the char array. Each row has several values in one column that are supposed to be in different columns/arrays. I tried split/str2num/str2double/double and some others. I am unable to convert this char array into numeric array with multiple rows and columns. I was wondering if there was a better way of doing this?Hi,
I generated a datafile which has numeric values, but in the char array. Each row has several values in one column that are supposed to be in different columns/arrays. I tried split/str2num/str2double/double and some others. I am unable to convert this char array into numeric array with multiple rows and columns. I was wondering if there was a better way of doing this? Hi,
I generated a datafile which has numeric values, but in the char array. Each row has several values in one column that are supposed to be in different columns/arrays. I tried split/str2num/str2double/double and some others. I am unable to convert this char array into numeric array with multiple rows and columns. I was wondering if there was a better way of doing this? #chararrays #chartonum #double MATLAB Answers — New Questions
Add MS Project to a channel in Teams
Hello
Please i need your help on this issue.
I am trying to add MS Project to a channel in Teams, I get an error that says “Looks like Project isn’t turned on for your organization. To use Project, contact your Office 365 admin.” But I just signed up for a trial of Project.
Hello Please i need your help on this issue. I am trying to add MS Project to a channel in Teams, I get an error that says “Looks like Project isn’t turned on for your organization. To use Project, contact your Office 365 admin.” But I just signed up for a trial of Project. Read More
How To Fix QuickBooks Multi-User Mode Problems : H202
QuickBooks is widely used for managing finances and accounting tasks in businesses, and its multi-user mode allows multiple users to work on the same company file simultaneously. However, users may encounter issues with the multi-user mode, such as QuickBooks Error H202. This error can disrupt collaboration and hinder productivity if not addressed promptly. In this article, we’ll explore what QuickBooks Error H202 signifies, examine its potential reasons, and provide detailed solutions to resolve it effectively.
What is QuickBooks Error H202?
QuickBooks Error H202 is an error code that occurs when a user attempts to switch to multi-user mode in QuickBooks Desktop but encounters issues connecting to the company file hosted on another computer. This error is often accompanied by an error message stating, “Error H202: An error occurred when trying to access the company file in multi-user mode.” When encountering this error, users may find themselves unable to access the company file in multi-user mode, leading to delays in collaborative accounting tasks.
Reasons for QuickBooks Error H202:
Several factors can contribute to the occurrence of QuickBooks Error H202. Some common reasons include:
Network Connection Issues: Problems with the network configuration or connectivity issues between the computer hosting the company file and the computer attempting to access it can lead to error H202.
Incorrect Hosting Configuration: Improper setup of QuickBooks hosting settings on the computer hosting the company file, or incorrect firewall and security software configurations, can trigger error H202.
Blockage by Firewall or Security Software: Overly restrictive firewall or security software settings may block QuickBooks communication ports, preventing proper access to the company file and resulting in error H202.
Damaged QuickBooks Installation: Corruption within the QuickBooks installation files or components related to multi-user mode functionality can interfere with proper file access, causing error H202.
Issues with QuickBooks Database Server Manager: Problems with the QuickBooks Database Server Manager, such as outdated or corrupted components, can prevent proper communication between QuickBooks and the company file, resulting in error H202.
Solutions to Fix QuickBooks Error H202:
To resolve QuickBooks Error H202, follow these comprehensive solutions:
Verify Hosting Settings:
Open QuickBooks on the computer hosting the company file.Go to the File menu and select Utilities.Ensure that Multi-User Access is enabled. If not, select it to enable multi-user mode.Repeat these steps on each computer attempting to access the company file to ensure proper hosting configuration.
Check Network Connectivity:
Verify that all computers are connected to the same network.Test network connectivity by pinging the host computer from the client computer(s) and vice versa.If there are any network issues, troubleshoot and resolve them to ensure proper communication between computers.
Configure Firewall and Security Settings:
Adjust firewall and security software settings to allow QuickBooks communication ports (specifically, ports 8019, 56726, and 55368) through both inbound and outbound rules.Add QuickBooks executable files (e.g., QBW32.exe, QBDBMgr.exe) to the list of trusted applications in firewall and security software settings.
Restart QuickBooks Services:
Close QuickBooks Desktop on all computers.Open the Run dialog by pressing Windows Key + R, type “services.msc,” and press Enter.Locate the QuickBooksDBXX service (XX represents the version of QuickBooks) and QuickBooksDBXX service, right-click each one, and select Restart.After restarting the services, reopen QuickBooks Desktop and attempt to switch to multi-user mode to see if error H202 persists.
Update QuickBooks and QuickBooks Database Server Manager:
Ensure that QuickBooks Desktop and QuickBooks Database Server Manager are updated to the latest versions.Open QuickBooks Desktop and go to the Help menu to check for updates. Similarly, update QuickBooks Database Server Manager to the latest version.
Use QuickBooks Database Server Manager:
Open QuickBooks Database Server Manager from the Start menu on the computer hosting the company file.Click on the Start Scan button to scan for company files.Once the scan is complete, attempt to switch to multi-user mode on the client computer(s) to see if error H202 is resolved.
Recreate QuickBooks.ND File:
Close QuickBooks Desktop on the computer hosting the company file.Navigate to the folder where the company file is located and locate the QuickBooks.ND file.Right-click on the QuickBooks.ND file and select Delete.Open QuickBooks Desktop to automatically recreate the QuickBooks.ND file.
Conclusion:
QuickBooks Error H202 can hinder collaboration and productivity in multi-user mode, but with the right troubleshooting steps, you can resolve it effectively. By addressing potential causes such as network connection issues, incorrect hosting configuration, firewall settings, damaged installations, and database server manager issues, you can overcome error H202 and ensure seamless collaboration among users in QuickBooks Desktop.
QuickBooks is widely used for managing finances and accounting tasks in businesses, and its multi-user mode allows multiple users to work on the same company file simultaneously. However, users may encounter issues with the multi-user mode, such as QuickBooks Error H202. This error can disrupt collaboration and hinder productivity if not addressed promptly. In this article, we’ll explore what QuickBooks Error H202 signifies, examine its potential reasons, and provide detailed solutions to resolve it effectively. What is QuickBooks Error H202? QuickBooks Error H202 is an error code that occurs when a user attempts to switch to multi-user mode in QuickBooks Desktop but encounters issues connecting to the company file hosted on another computer. This error is often accompanied by an error message stating, “Error H202: An error occurred when trying to access the company file in multi-user mode.” When encountering this error, users may find themselves unable to access the company file in multi-user mode, leading to delays in collaborative accounting tasks. Reasons for QuickBooks Error H202: Several factors can contribute to the occurrence of QuickBooks Error H202. Some common reasons include:Network Connection Issues: Problems with the network configuration or connectivity issues between the computer hosting the company file and the computer attempting to access it can lead to error H202.Incorrect Hosting Configuration: Improper setup of QuickBooks hosting settings on the computer hosting the company file, or incorrect firewall and security software configurations, can trigger error H202.Blockage by Firewall or Security Software: Overly restrictive firewall or security software settings may block QuickBooks communication ports, preventing proper access to the company file and resulting in error H202.Damaged QuickBooks Installation: Corruption within the QuickBooks installation files or components related to multi-user mode functionality can interfere with proper file access, causing error H202.Issues with QuickBooks Database Server Manager: Problems with the QuickBooks Database Server Manager, such as outdated or corrupted components, can prevent proper communication between QuickBooks and the company file, resulting in error H202. Solutions to Fix QuickBooks Error H202: To resolve QuickBooks Error H202, follow these comprehensive solutions:Verify Hosting Settings:Open QuickBooks on the computer hosting the company file.Go to the File menu and select Utilities.Ensure that Multi-User Access is enabled. If not, select it to enable multi-user mode.Repeat these steps on each computer attempting to access the company file to ensure proper hosting configuration.Check Network Connectivity:Verify that all computers are connected to the same network.Test network connectivity by pinging the host computer from the client computer(s) and vice versa.If there are any network issues, troubleshoot and resolve them to ensure proper communication between computers.Configure Firewall and Security Settings:Adjust firewall and security software settings to allow QuickBooks communication ports (specifically, ports 8019, 56726, and 55368) through both inbound and outbound rules.Add QuickBooks executable files (e.g., QBW32.exe, QBDBMgr.exe) to the list of trusted applications in firewall and security software settings.Restart QuickBooks Services:Close QuickBooks Desktop on all computers.Open the Run dialog by pressing Windows Key + R, type “services.msc,” and press Enter.Locate the QuickBooksDBXX service (XX represents the version of QuickBooks) and QuickBooksDBXX service, right-click each one, and select Restart.After restarting the services, reopen QuickBooks Desktop and attempt to switch to multi-user mode to see if error H202 persists.Update QuickBooks and QuickBooks Database Server Manager:Ensure that QuickBooks Desktop and QuickBooks Database Server Manager are updated to the latest versions.Open QuickBooks Desktop and go to the Help menu to check for updates. Similarly, update QuickBooks Database Server Manager to the latest version.Use QuickBooks Database Server Manager:Open QuickBooks Database Server Manager from the Start menu on the computer hosting the company file.Click on the Start Scan button to scan for company files.Once the scan is complete, attempt to switch to multi-user mode on the client computer(s) to see if error H202 is resolved.Recreate QuickBooks.ND File:Close QuickBooks Desktop on the computer hosting the company file.Navigate to the folder where the company file is located and locate the QuickBooks.ND file.Right-click on the QuickBooks.ND file and select Delete.Open QuickBooks Desktop to automatically recreate the QuickBooks.ND file. Conclusion: QuickBooks Error H202 can hinder collaboration and productivity in multi-user mode, but with the right troubleshooting steps, you can resolve it effectively. By addressing potential causes such as network connection issues, incorrect hosting configuration, firewall settings, damaged installations, and database server manager issues, you can overcome error H202 and ensure seamless collaboration among users in QuickBooks Desktop. Read More
Files disappeared?
5 years ago I downloaded a bunch of free cookbooks. Like hundreds. I saved them in my Onedrive in folders by topic, then author. Some I saved under topic, not in an author folder.
It’s been awhile since I’ve opened this folder. Well today I go in and anything under an author folder is gone. Anything just under topic is there. Any idea how this happened? Seems like files outside of the books folder are all there.
5 years ago I downloaded a bunch of free cookbooks. Like hundreds. I saved them in my Onedrive in folders by topic, then author. Some I saved under topic, not in an author folder.It’s been awhile since I’ve opened this folder. Well today I go in and anything under an author folder is gone. Anything just under topic is there. Any idea how this happened? Seems like files outside of the books folder are all there. Read More
Cancel Subscription
Hello
Please i need help on this issue.
How do i request for a refund and to cancel his subscription.
How do i qualify to get a refund.
Hello Please i need help on this issue. How do i request for a refund and to cancel his subscription. How do i qualify to get a refund. Read More
artificial neural network bias
Hi all,
I have developed an artificial neural network with a single hidden layer. The purpose of this is to predict as a probability when a cliff will fail given wave, sea level and precipitation data. To do this I have used the ‘fitnet’ function. However, I am still very new to neural networks and dont fully understand the parameters behind them. Currently, the network is reproducing the test data ok ish however it is struggling to produce the validation data. This is because I have input the cliff failures as a binary column which has cliff failures as 1 and no failures as 0. There are approximately 30 failures which occur across 262 days. The issue is that the network is heavily biased towards reproducing non-failures and therefore when it attempts to predict the validation data does not predict any failures. This means the network ouputs more zeros than required since the training data is mostly zeros since most days experience no cliff failure. I am aware that there is potential to use a grid search to optimise the hyper parameters but I am unsure how to do this. How can I adjust the bias to reproduce more representative results.
Any help would be greatly appreciated.Hi all,
I have developed an artificial neural network with a single hidden layer. The purpose of this is to predict as a probability when a cliff will fail given wave, sea level and precipitation data. To do this I have used the ‘fitnet’ function. However, I am still very new to neural networks and dont fully understand the parameters behind them. Currently, the network is reproducing the test data ok ish however it is struggling to produce the validation data. This is because I have input the cliff failures as a binary column which has cliff failures as 1 and no failures as 0. There are approximately 30 failures which occur across 262 days. The issue is that the network is heavily biased towards reproducing non-failures and therefore when it attempts to predict the validation data does not predict any failures. This means the network ouputs more zeros than required since the training data is mostly zeros since most days experience no cliff failure. I am aware that there is potential to use a grid search to optimise the hyper parameters but I am unsure how to do this. How can I adjust the bias to reproduce more representative results.
Any help would be greatly appreciated. Hi all,
I have developed an artificial neural network with a single hidden layer. The purpose of this is to predict as a probability when a cliff will fail given wave, sea level and precipitation data. To do this I have used the ‘fitnet’ function. However, I am still very new to neural networks and dont fully understand the parameters behind them. Currently, the network is reproducing the test data ok ish however it is struggling to produce the validation data. This is because I have input the cliff failures as a binary column which has cliff failures as 1 and no failures as 0. There are approximately 30 failures which occur across 262 days. The issue is that the network is heavily biased towards reproducing non-failures and therefore when it attempts to predict the validation data does not predict any failures. This means the network ouputs more zeros than required since the training data is mostly zeros since most days experience no cliff failure. I am aware that there is potential to use a grid search to optimise the hyper parameters but I am unsure how to do this. How can I adjust the bias to reproduce more representative results.
Any help would be greatly appreciated. neural network, neural networks, ai, machine learning, binary, fitnet, bias, deep learning MATLAB Answers — New Questions
How do structures work?
How do structures work? I’ve been trying a smoewhat big struct file but the workspace cannot seem to be able to find the values of the structure (the values of the fields are missing). Here is the code. Please help me I do not know what to do.
Default_GP = struct ( …%
…% — Connection Properties —
…%
‘Platform’, "B200", …
‘SerialNum’, "321E19C", …
…%
…% — Configuration Propreties —
…%
…% Frequency
…%
‘CenterFrequency’, 101e6, …
‘FrequencyCorrection’, 0, … //LO offset
‘FrequencyStepsString’ ,{{‘1 Hz’,’10 Hz’,’100 Hz’,’1 kHz’,’10 kHz’,’100 kHz’,’1 MHz’,’10 MHz’,’100 MHz’}}, …
‘AllFrequencySteps’,[1,10,100,1e3,10e3,100e3,1e6,10e6,100e6],…
‘FrequencyStep’,100e3,…
…%
…% Reciever Gain
…%
‘RecieverGain’, 0,… % 76 dB – max reciver gain
…
…
‘AllPPSSources’, {{"Internal", "External", "GPSDO"}},…
‘PPSSource’, "Internal",…
‘AllClockSources’, {{"Internal", "External", "GPSDO"}},…
‘ClockSource’, "Internal",…
…%
…% Output
…%
‘AllSampleRates’, {},… % range of sample rates 5MHz – 61.44MHz
‘SampleRateSteps’, {{‘0.1 MHz’, ‘1 MHz’,’10 MHz’}},…
‘AllSampleRateSteps’, [0.1e6, 1e6, 10e6],…
‘SampleRate’, 32e6,… % Master Clock Rate
…
‘TransportDataTypeStrings’, {{"int16", "int8"}},…
‘TransportDataType’, "int16",…
‘OutputDataTypeString’, {{"int16", "int18", "single", "double"}},…
‘OutputDataType’, "double",…
…
‘AllSamplesPerFrameString’,{{‘4096′,’8192′,’16384′,’32768′,’65536′,’131072′,’262144’}},…
‘AllSamplesPerFrame’,[4096,8192,16384,32768,65536,131072,262144],…
‘SamplesPerFrame’,131072,…
…
‘EnableBurstMode’,false,… % Ensure a set of frames without overrun of USRP B200 output
‘NumFramesInBurst’,10,… % Number of frames in contiguous burstof USRP B200 output
…%
…% Baseband Decimation
…%
‘AllDecimationFactorsRanges’, {{‘[1, 128]’, ‘[128, 256]’, ‘[256-512]’}},…
‘DecimationMultiplesOf’, [1, 2, 4],…
‘DecimationFactor’, 1); % to be addedHow do structures work? I’ve been trying a smoewhat big struct file but the workspace cannot seem to be able to find the values of the structure (the values of the fields are missing). Here is the code. Please help me I do not know what to do.
Default_GP = struct ( …%
…% — Connection Properties —
…%
‘Platform’, "B200", …
‘SerialNum’, "321E19C", …
…%
…% — Configuration Propreties —
…%
…% Frequency
…%
‘CenterFrequency’, 101e6, …
‘FrequencyCorrection’, 0, … //LO offset
‘FrequencyStepsString’ ,{{‘1 Hz’,’10 Hz’,’100 Hz’,’1 kHz’,’10 kHz’,’100 kHz’,’1 MHz’,’10 MHz’,’100 MHz’}}, …
‘AllFrequencySteps’,[1,10,100,1e3,10e3,100e3,1e6,10e6,100e6],…
‘FrequencyStep’,100e3,…
…%
…% Reciever Gain
…%
‘RecieverGain’, 0,… % 76 dB – max reciver gain
…
…
‘AllPPSSources’, {{"Internal", "External", "GPSDO"}},…
‘PPSSource’, "Internal",…
‘AllClockSources’, {{"Internal", "External", "GPSDO"}},…
‘ClockSource’, "Internal",…
…%
…% Output
…%
‘AllSampleRates’, {},… % range of sample rates 5MHz – 61.44MHz
‘SampleRateSteps’, {{‘0.1 MHz’, ‘1 MHz’,’10 MHz’}},…
‘AllSampleRateSteps’, [0.1e6, 1e6, 10e6],…
‘SampleRate’, 32e6,… % Master Clock Rate
…
‘TransportDataTypeStrings’, {{"int16", "int8"}},…
‘TransportDataType’, "int16",…
‘OutputDataTypeString’, {{"int16", "int18", "single", "double"}},…
‘OutputDataType’, "double",…
…
‘AllSamplesPerFrameString’,{{‘4096′,’8192′,’16384′,’32768′,’65536′,’131072′,’262144’}},…
‘AllSamplesPerFrame’,[4096,8192,16384,32768,65536,131072,262144],…
‘SamplesPerFrame’,131072,…
…
‘EnableBurstMode’,false,… % Ensure a set of frames without overrun of USRP B200 output
‘NumFramesInBurst’,10,… % Number of frames in contiguous burstof USRP B200 output
…%
…% Baseband Decimation
…%
‘AllDecimationFactorsRanges’, {{‘[1, 128]’, ‘[128, 256]’, ‘[256-512]’}},…
‘DecimationMultiplesOf’, [1, 2, 4],…
‘DecimationFactor’, 1); % to be added How do structures work? I’ve been trying a smoewhat big struct file but the workspace cannot seem to be able to find the values of the structure (the values of the fields are missing). Here is the code. Please help me I do not know what to do.
Default_GP = struct ( …%
…% — Connection Properties —
…%
‘Platform’, "B200", …
‘SerialNum’, "321E19C", …
…%
…% — Configuration Propreties —
…%
…% Frequency
…%
‘CenterFrequency’, 101e6, …
‘FrequencyCorrection’, 0, … //LO offset
‘FrequencyStepsString’ ,{{‘1 Hz’,’10 Hz’,’100 Hz’,’1 kHz’,’10 kHz’,’100 kHz’,’1 MHz’,’10 MHz’,’100 MHz’}}, …
‘AllFrequencySteps’,[1,10,100,1e3,10e3,100e3,1e6,10e6,100e6],…
‘FrequencyStep’,100e3,…
…%
…% Reciever Gain
…%
‘RecieverGain’, 0,… % 76 dB – max reciver gain
…
…
‘AllPPSSources’, {{"Internal", "External", "GPSDO"}},…
‘PPSSource’, "Internal",…
‘AllClockSources’, {{"Internal", "External", "GPSDO"}},…
‘ClockSource’, "Internal",…
…%
…% Output
…%
‘AllSampleRates’, {},… % range of sample rates 5MHz – 61.44MHz
‘SampleRateSteps’, {{‘0.1 MHz’, ‘1 MHz’,’10 MHz’}},…
‘AllSampleRateSteps’, [0.1e6, 1e6, 10e6],…
‘SampleRate’, 32e6,… % Master Clock Rate
…
‘TransportDataTypeStrings’, {{"int16", "int8"}},…
‘TransportDataType’, "int16",…
‘OutputDataTypeString’, {{"int16", "int18", "single", "double"}},…
‘OutputDataType’, "double",…
…
‘AllSamplesPerFrameString’,{{‘4096′,’8192′,’16384′,’32768′,’65536′,’131072′,’262144’}},…
‘AllSamplesPerFrame’,[4096,8192,16384,32768,65536,131072,262144],…
‘SamplesPerFrame’,131072,…
…
‘EnableBurstMode’,false,… % Ensure a set of frames without overrun of USRP B200 output
‘NumFramesInBurst’,10,… % Number of frames in contiguous burstof USRP B200 output
…%
…% Baseband Decimation
…%
‘AllDecimationFactorsRanges’, {{‘[1, 128]’, ‘[128, 256]’, ‘[256-512]’}},…
‘DecimationMultiplesOf’, [1, 2, 4],…
‘DecimationFactor’, 1); % to be added structures, workspace, command MATLAB Answers — New Questions
New Bookings
Hey,
I’m new to bookings and have looked through here and on YouTube, but I still need help finding what I’m looking for.
I’m looking to set up a bookings page for company health assessments. These appointments are 30 minutes long, and one of the teams that is in will complete the assessment. No single staff member will be assigned to the booking.
When setting it up, I used the shared booking pages and wanted to link this to a shared mailbox calendar that the entire team could access. I have had the below problems.
1) I have not been able to get the bookings calendar to link with the mailbox calendar.
2) When testing with my calendar, when blocking out time as off or busy, this still allows bookings even though I have turned on the Outlook events, which affects booking availability.
3) When a booking has been made through the booking page, it still displays the time slot as available and returns the error message after the staff member fills out the form. Can this be updated so that it does not show times when they are booked?
Any help would be greatly appreciated,
I appreciate any help you can provide.
Hey, I’m new to bookings and have looked through here and on YouTube, but I still need help finding what I’m looking for. I’m looking to set up a bookings page for company health assessments. These appointments are 30 minutes long, and one of the teams that is in will complete the assessment. No single staff member will be assigned to the booking. When setting it up, I used the shared booking pages and wanted to link this to a shared mailbox calendar that the entire team could access. I have had the below problems. 1) I have not been able to get the bookings calendar to link with the mailbox calendar.2) When testing with my calendar, when blocking out time as off or busy, this still allows bookings even though I have turned on the Outlook events, which affects booking availability.3) When a booking has been made through the booking page, it still displays the time slot as available and returns the error message after the staff member fills out the form. Can this be updated so that it does not show times when they are booked? Any help would be greatly appreciated, I appreciate any help you can provide. Read More
Week commencing column fill
Hello,
Can anyone help please?
I want to fill a column with successive Mondays, ie June 3, June 10, June 17.
Can anyone advise how to do this?
Many thanks
Sonja84
Hello,Can anyone help please?I want to fill a column with successive Mondays, ie June 3, June 10, June 17.Can anyone advise how to do this?Many thanksSonja84 Read More
Remove staff from Dynamic distribution group.
I have a dynamic distribution group that pulls all licenses premium users, and we use it to add access to applications. I need to remove accounts that have a premium license but don’t need access to the application. I just cannot get the syntax quite right.
This is the systex rule that I have now.
user.assignedPlans -any (assignedPlan.servicePlanId -eq “23456778-df34-3dfg-fe35-lpn3r07bb09d” -and assignedPlan.capabilityStatus -eq “Enabled”)
I have a dynamic distribution group that pulls all licenses premium users, and we use it to add access to applications. I need to remove accounts that have a premium license but don’t need access to the application. I just cannot get the syntax quite right. This is the systex rule that I have now. user.assignedPlans -any (assignedPlan.servicePlanId -eq “23456778-df34-3dfg-fe35-lpn3r07bb09d” -and assignedPlan.capabilityStatus -eq “Enabled”) Read More
New to DMC partners: Latest campaigns available
All 2024 campaigns are now available in 11 languages. Share with your marketing team and drive demand with Modern Work, Azure Infrastructure, Business Applications, Data and AI, and Security marketing campaigns.
Operating with an agile marketing team but want to scale demand generation efforts? Leverage DMC as an always on marketing tool that provides an automated, curated way to capture and nurture new leads. With the recently enhanced Digital Content Marketing OnDemand platform you can create a consistent stream of content, aligned to the solutions your customers want to buy. Find industry tailored content to help you reach customers in fast-growing industries like retail, healthcare, banking, manufacturing, and sustainability.
Why should partners care or act now?
All of our FY24 solution area campaigns are now available, tailored to help drive demand in fast-growing industries and for SMB or Enterprise audiences.
Digital Content OnDemand platform has the features you need to quickly and easily drive demand.
Reach potential customers through your social media channels, automatically nurture leads through email, and engage on the web through web banners, your own microsite, and integration with your website.
Easier to find and manage the campaign you’re looking for, see performance, and connect to your accounts.
Detailed reporting to keep track of your performance with clear and actionable guidance to optimize your use of DMC.
Check out all of our 2024 campaigns, now available:
Solution areas (Azure Infrastructure, Modern Work, Business Applications, Data & AI, Security, Digital & App Innovation).
Localized in 11 languages.
Tailored for fast-growing industries like financial services, healthcare, manufacturing, retail, sustainability, education and more.
From SMB to Enterprise
Use the enhanced Digital Marketing Content OnDemand platform:
Looking for an automated way to provide prospects with fresh weekly campaigns automatically? Want to reach new leads through social media and nurture through email?
With the free for partners DMC platform, you can automatically cobrand content for your social media channels, email potential customers, and add content to your blog.
Learn about the latest features, based on partner feedback.
Everything your sales & marketing team need.
Get the guidance you need to get started with DMC.
Sign up for DMC today!
Microsoft Tech Community – Latest Blogs –Read More