Category: News
Trying to update submodules of a project with a script.
Hello,
I’m trying to create a script to facilitate team member when they have to update submodules inside a project to a specific tag.
I have no problem for the upadate, but io’m quite stuck to the commit phase.
I try this list of commands:
commit_message = char(strcat("Moved submodule Standard to ", standard_tag, {newline}, "Moved submodule Common to ", common_tag));
git_command = [‘git commit -m ‘ commit_message];
system(git_command);
but, when i try to execute the script, i have this errors:
error: pathspec ‘submodule’ did not match any file(s) known to git
error: pathspec ‘Standard’ did not match any file(s) known to git
error: pathspec ‘to’ did not match any file(s) known to git
error: pathspec ‘2024R2’ did not match any file(s) known to git
I suppose that my issue is related to this:
git_command = ‘git commit -m Moved submodule Standard to 2024R2
Moved submodule Common to 2024R2′
It seems that the system function can’t isolate correctly the "message" for the commit. How can i solve this one.
Thank you in advance.
Best regards.
ClaudioHello,
I’m trying to create a script to facilitate team member when they have to update submodules inside a project to a specific tag.
I have no problem for the upadate, but io’m quite stuck to the commit phase.
I try this list of commands:
commit_message = char(strcat("Moved submodule Standard to ", standard_tag, {newline}, "Moved submodule Common to ", common_tag));
git_command = [‘git commit -m ‘ commit_message];
system(git_command);
but, when i try to execute the script, i have this errors:
error: pathspec ‘submodule’ did not match any file(s) known to git
error: pathspec ‘Standard’ did not match any file(s) known to git
error: pathspec ‘to’ did not match any file(s) known to git
error: pathspec ‘2024R2’ did not match any file(s) known to git
I suppose that my issue is related to this:
git_command = ‘git commit -m Moved submodule Standard to 2024R2
Moved submodule Common to 2024R2′
It seems that the system function can’t isolate correctly the "message" for the commit. How can i solve this one.
Thank you in advance.
Best regards.
Claudio Hello,
I’m trying to create a script to facilitate team member when they have to update submodules inside a project to a specific tag.
I have no problem for the upadate, but io’m quite stuck to the commit phase.
I try this list of commands:
commit_message = char(strcat("Moved submodule Standard to ", standard_tag, {newline}, "Moved submodule Common to ", common_tag));
git_command = [‘git commit -m ‘ commit_message];
system(git_command);
but, when i try to execute the script, i have this errors:
error: pathspec ‘submodule’ did not match any file(s) known to git
error: pathspec ‘Standard’ did not match any file(s) known to git
error: pathspec ‘to’ did not match any file(s) known to git
error: pathspec ‘2024R2’ did not match any file(s) known to git
I suppose that my issue is related to this:
git_command = ‘git commit -m Moved submodule Standard to 2024R2
Moved submodule Common to 2024R2′
It seems that the system function can’t isolate correctly the "message" for the commit. How can i solve this one.
Thank you in advance.
Best regards.
Claudio git, simulink, submodules, script MATLAB Answers — New Questions
How can I provide a custom abort message for the pre-commit hook for MATLAB R2024a and later?
How can I provide a custom abort message for the pre-commit hook for MATLAB R2024a and later?
I have already added corresponding echo commands to the pre-commit hook that show up correctly in Git Bash.
Checking this in MATLAB, the error message remains empty:
How can I ensure that the message shows up?How can I provide a custom abort message for the pre-commit hook for MATLAB R2024a and later?
I have already added corresponding echo commands to the pre-commit hook that show up correctly in Git Bash.
Checking this in MATLAB, the error message remains empty:
How can I ensure that the message shows up? How can I provide a custom abort message for the pre-commit hook for MATLAB R2024a and later?
I have already added corresponding echo commands to the pre-commit hook that show up correctly in Git Bash.
Checking this in MATLAB, the error message remains empty:
How can I ensure that the message shows up? MATLAB Answers — New Questions
Im experiencing misalignment of the crests in my normalized vertical velocity profiles when plotting multiple turbulence models; any suggestions on how to fix this?
Basically I had a running code for radial velocity contours which was fixed an all the crests aligned. Now i have changed the input files and associated names in the codes but the crests are not aligning, any and all help will be apreciatedBasically I had a running code for radial velocity contours which was fixed an all the crests aligned. Now i have changed the input files and associated names in the codes but the crests are not aligning, any and all help will be apreciated Basically I had a running code for radial velocity contours which was fixed an all the crests aligned. Now i have changed the input files and associated names in the codes but the crests are not aligning, any and all help will be apreciated plotting MATLAB Answers — New Questions
MATLAB runtime installer doesn’t launch on Macbook (with M3 chip)
I’m trying to install and configure MATLAB Runtime by following this article. I downloaded the corresponding installer for my macbook (arm64) and MATLAB version (MATLAB R2024a), and moved the installer in my app folder:
However, even if I double-click the app, it doesn’t display a dialog box. I allowed MATLAB to have a full disk access, but it didn’t fix the problem. Does anyone have similar experience?I’m trying to install and configure MATLAB Runtime by following this article. I downloaded the corresponding installer for my macbook (arm64) and MATLAB version (MATLAB R2024a), and moved the installer in my app folder:
However, even if I double-click the app, it doesn’t display a dialog box. I allowed MATLAB to have a full disk access, but it didn’t fix the problem. Does anyone have similar experience? I’m trying to install and configure MATLAB Runtime by following this article. I downloaded the corresponding installer for my macbook (arm64) and MATLAB version (MATLAB R2024a), and moved the installer in my app folder:
However, even if I double-click the app, it doesn’t display a dialog box. I allowed MATLAB to have a full disk access, but it didn’t fix the problem. Does anyone have similar experience? matlab runtime, mac MATLAB Answers — New Questions
Signed Gmail calendar does not change/create events.
I have three accounts configured in Outlook, each with its own calendar. I had to format my computer, and upon reconfiguring the accounts, the Gmail calendar does not create or alter events on the web, only locally on the machine. All meeting acceptances need to be done on the web to be updated in Outlook. I have already uninstalled and reinstalled Office 365, reconfigured the accounts, and nothing has changed.
I have three accounts configured in Outlook, each with its own calendar. I had to format my computer, and upon reconfiguring the accounts, the Gmail calendar does not create or alter events on the web, only locally on the machine. All meeting acceptances need to be done on the web to be updated in Outlook. I have already uninstalled and reinstalled Office 365, reconfigured the accounts, and nothing has changed. Read More
Multiple conditions task color coding
Hi,
I’m a newbie on MS Project so sorry if this question is trivial!
I’d like to color code my tasks based on the resources. I’ve found multiple ways to do that with on the web but it only applies when you have a single resource per task.
For my application I’d like to color code the task based on the machine used but I also have to add an operator as a second resource. I’m pretty sure there should be a way to code this in the custome fields but I have not mangaed to find it so far.
Anyone could help me out?
THX!
Hi, I’m a newbie on MS Project so sorry if this question is trivial!I’d like to color code my tasks based on the resources. I’ve found multiple ways to do that with on the web but it only applies when you have a single resource per task.For my application I’d like to color code the task based on the machine used but I also have to add an operator as a second resource. I’m pretty sure there should be a way to code this in the custome fields but I have not mangaed to find it so far.Anyone could help me out? THX! Read More
Defender for Office – API for detections and status
Hello everyone,
We would like to transfer data from “Microsoft Defender for Office” to our own dashboard using HTTP REST API or an API.
Unfortunately, I can find little to nothing about this.
Are there any options for this?
Best regards
Hello everyone,We would like to transfer data from “Microsoft Defender for Office” to our own dashboard using HTTP REST API or an API.Unfortunately, I can find little to nothing about this.Are there any options for this?Best regards Read More
Device Control with Defender for Endpoint not capturing evidence
Recently Defender for Endpoint has stopped capturing evidence when transferring files to a USB device and I can’t figure out what’s changed. The policy is included below, and we’re deploying using GPO:
<PolicyRules>
<PolicyRule Id=”{36ae1037-a639-4cff-946b-b36c53089a4c}”>
<!– Rule that permits and audits specific approved devices –>
<Name>Audit Write access to approved USBs</Name>
<IncludedIdList>
<GroupId>{9b28fae8-72f7-4267-a1a5-685f747a7146}</GroupId>
</IncludedIdList>
<ExcludedIdList></ExcludedIdList>
<Entry Id=”{a0bcff88-b8e4-4f48-92be-16c36adac930}”>
<Type>Allow</Type>
<Options>8</Options>
<AccessMask>63</AccessMask>
</Entry>
</PolicyRule>
</PolicyRules>
And the group is:
<Groups>
<Group Id=”{9b28fae8-72f7-4267-a1a5-685f747a7146}”>
<!– Group for all removable devices –>
<MatchType>MatchAny</MatchType>
<DescriptorIdList>
<PrimaryId>RemovableMediaDevices</PrimaryId>
<PrimaryId>CdRomDevices</PrimaryId>
<PrimaryId>WpdDevices</PrimaryId>
</DescriptorIdList>
</Group>
</Groups>
This policy should allow all devices R/W access and create a copy of the file in the location defined in the settings. I’ve tried setting the location to both a network share and local paths (C:Temp and C:Temptemp). In the security portal at security.microsoft.com, when evidence is captured it creates a RemovableStorageFileEvent. We have stopped getting these events, but we still get RemovableStoragePolicyTriggered events, indicating the policy is applied. I also see the evidence locally on the machine at “C:WindowsDefender Duplication Data”. The issue seems to be with the moving the evidence from the local store to the location defined in the settings, but I can’t figure out why it won’t move. Any help is appreciated.
Recently Defender for Endpoint has stopped capturing evidence when transferring files to a USB device and I can’t figure out what’s changed. The policy is included below, and we’re deploying using GPO: <PolicyRules> <PolicyRule Id=”{36ae1037-a639-4cff-946b-b36c53089a4c}”> <!– Rule that permits and audits specific approved devices –> <Name>Audit Write access to approved USBs</Name> <IncludedIdList> <GroupId>{9b28fae8-72f7-4267-a1a5-685f747a7146}</GroupId> </IncludedIdList> <ExcludedIdList></ExcludedIdList> <Entry Id=”{a0bcff88-b8e4-4f48-92be-16c36adac930}”> <Type>Allow</Type> <Options>8</Options> <AccessMask>63</AccessMask> </Entry> </PolicyRule></PolicyRules> And the group is:<Groups> <Group Id=”{9b28fae8-72f7-4267-a1a5-685f747a7146}”> <!– Group for all removable devices –> <MatchType>MatchAny</MatchType> <DescriptorIdList> <PrimaryId>RemovableMediaDevices</PrimaryId> <PrimaryId>CdRomDevices</PrimaryId> <PrimaryId>WpdDevices</PrimaryId> </DescriptorIdList> </Group></Groups> This policy should allow all devices R/W access and create a copy of the file in the location defined in the settings. I’ve tried setting the location to both a network share and local paths (C:Temp and C:Temptemp). In the security portal at security.microsoft.com, when evidence is captured it creates a RemovableStorageFileEvent. We have stopped getting these events, but we still get RemovableStoragePolicyTriggered events, indicating the policy is applied. I also see the evidence locally on the machine at “C:WindowsDefender Duplication Data”. The issue seems to be with the moving the evidence from the local store to the location defined in the settings, but I can’t figure out why it won’t move. Any help is appreciated. Read More
Copy cell from an array of sheets.
I have 4 sheets. “Jane Doe, John Smith, Keven Brown, and Jean Grey” Each of these sheets contains information associated with an employee.
I want to be able to populate the Current Active Employee sheet cells D-Q with the information from each of the sheets based on if the employee number matches/is the same.
I have inserted this equation on ‘Current Active Employees’!D1-Q7, but have not gotten any results.
Any suggestions?
I have 4 sheets. “Jane Doe, John Smith, Keven Brown, and Jean Grey” Each of these sheets contains information associated with an employee. I want to be able to populate the Current Active Employee sheet cells D-Q with the information from each of the sheets based on if the employee number matches/is the same. I have inserted this equation on ‘Current Active Employees’!D1-Q7, but have not gotten any results. Any suggestions? Read More
Azure Inherited roles, but still access denied
Hi,
In e.g. Key Vault, when looking for the Access Control I can see that user account have custom contributor role inherited from the subscription level. When looking for the role more deeply it shows:
“Showing 500 of 15937 permissions View all (will take a moment to load)“
E.g. having the following permissions: Read Secret Properties and Write Secret. So all should be kind of okay..? 🙂
But when I’m looking for the e.g. secrets in the key vault, it gives me back “The operation is not allowed by RBAC.” and “You are unauthorized to view these contents.“. I thought there could be a “deny” rules, but nothing in there either.
What could be the trick on here? What might be blocking or missing the access to the resources.
Btw, I just tested, I was able to create the Key Vault by myself.
Hi, In e.g. Key Vault, when looking for the Access Control I can see that user account have custom contributor role inherited from the subscription level. When looking for the role more deeply it shows:”Showing 500 of 15937 permissions View all (will take a moment to load)”E.g. having the following permissions: Read Secret Properties and Write Secret. So all should be kind of okay..? 🙂 But when I’m looking for the e.g. secrets in the key vault, it gives me back “The operation is not allowed by RBAC.” and “You are unauthorized to view these contents.”. I thought there could be a “deny” rules, but nothing in there either. What could be the trick on here? What might be blocking or missing the access to the resources. Btw, I just tested, I was able to create the Key Vault by myself. Read More
XXX virtual machines should enable Azure Disk Encryption or EncryptionAtHost.
Hello everyone, I’m facing issues related to a policy:
However, the policy does not recognize that it is encrypted and shows it as non-compliant.
The same happens when enabling Azure Disk Encryption (ADE): the policy still indicates that it is non-compliant.
Has anyone else experienced this?
Hello everyone, I’m facing issues related to a policy:Linux virtual machines should enable Azure Disk Encryption or EncryptionAtHost.Windows virtual machines should enable Azure Disk Encryption or EncryptionAtHost. After enabling EncryptionAtHost, it appears as encrypted in the portal. However, the policy does not recognize that it is encrypted and shows it as non-compliant. The same happens when enabling Azure Disk Encryption (ADE): the policy still indicates that it is non-compliant. Has anyone else experienced this? Read More
Billed and unbilled daily rated usage reconciliation API v2 (GA)
I’m testing this new api and I need the information BillingProvider that was in the sdk but I can’t find it in this new api.
Is it possible to retrieve this information?
Thank you in advance
I’m testing this new api and I need the information BillingProvider that was in the sdk but I can’t find it in this new api.Is it possible to retrieve this information?Thank you in advance Read More
Mail Merge and Excel
Hello everyone, I could really use some insight here. I am pulling out my hair as I cannot figure out what is going on. I have rows of records from which I am trying to merge some of the info into Mail Merge. The normal data does not seem to be a problem. However, when I try to merge in Dates this is where the trouble begins. In my Mail Merge Letter I have Merge Fields that have From and To Dates that I am trying to merge in but I keep getting numbers that represent the dates. Especially the To Date and some other dates I have in the letter. Only the From Date is displaying correctly. So, as an example, I have: Monday, March 18, 2024 to 45375 when it should display as Sunday, March 24, 2024. I have applied the switches and yet I still keep getting the numbers. The date for the To Date in the Excel workbook is calculated if this makes any difference. =IF(M2=””,””,M2+6). Can anyone help me figure this out? I really need to perform these Mail Merges but these numbers being generated will mean nothing to no one. Seems like such a simple process yet being so complicated.
Here is the Merge field set up but regardless of this it is just showing the numbers on the merge/preview. {MERGEFIELD End_Date @ “dddd, MMMM d, yyyy” }. What am I missing??
Thank you to any folks that can help me figure this out.
Carl
Hello everyone, I could really use some insight here. I am pulling out my hair as I cannot figure out what is going on. I have rows of records from which I am trying to merge some of the info into Mail Merge. The normal data does not seem to be a problem. However, when I try to merge in Dates this is where the trouble begins. In my Mail Merge Letter I have Merge Fields that have From and To Dates that I am trying to merge in but I keep getting numbers that represent the dates. Especially the To Date and some other dates I have in the letter. Only the From Date is displaying correctly. So, as an example, I have: Monday, March 18, 2024 to 45375 when it should display as Sunday, March 24, 2024. I have applied the switches and yet I still keep getting the numbers. The date for the To Date in the Excel workbook is calculated if this makes any difference. =IF(M2=””,””,M2+6). Can anyone help me figure this out? I really need to perform these Mail Merges but these numbers being generated will mean nothing to no one. Seems like such a simple process yet being so complicated. Here is the Merge field set up but regardless of this it is just showing the numbers on the merge/preview. {MERGEFIELD End_Date @ “dddd, MMMM d, yyyy” }. What am I missing?? Thank you to any folks that can help me figure this out. Carl Read More
Ad-Hoc Data Exploration Feature
Ad-Hoc Data Exploration Feature
We are excited to introduce the new Data Exploration feature, designed to enhance your ability to delve deeper into the data presented on any Dashboard.
If the information you’re seeking isn’t readily available on the dashboard, this feature allows you to extend your exploration beyond the data displayed in the tiles, potentially uncovering new insights.
Directly from a dashboard, you can refine your exploration using a user-friendly, form-like interface. This intuitive and dynamic experience is tailored for insights explorers seeking insights based on high volumes of data in near real time.
You can add filters, create aggregations, and switch visualization types without writing queries to easily uncover insights.
With this new feature, you are no longer bound by the limitations of pre-defined dashboards, nor are you required to master KQL (Kusto Query Language). As independent explorers, you have the freedom for ad-hoc exploration, leveraging existing tiles to kickstart your journey.
Learn more about this feature Explore data in dashboard tiles (preview) – Azure Data Explorer | Microsoft Learn
Azure Data Explorer Web UI team is looking forward to your feedback in KustoWebExpFeedback@service.microsoft.com
You’re also welcome to add more ideas and vote for them here – https://aka.ms/adx.ideas
Microsoft Tech Community – Latest Blogs –Read More
Mid-Year Viva Connections Recap and Highlights
Viva Connections serves as a gateway to a modern employee experience. From streamlining tasks to enhancing communication, dashboard cards bring in actionable tasks and information from virtually anywhere into a single dynamic app for employees.
We have seen growing adoption of Viva Connections, making us one of the most popular apps in Microsoft Teams. We are continuing to invest in Viva Connections, addressing customer feedback and enhancing capabilities. Here are the latest and greatest highlights.
Staying Connected
Viva Connections is all about connecting you to the things you need, and now, you can get Desktop Notifications to ensure you don’t miss the latest news and announcements. This new capability gives your employees the ability to control which notifications they want to receive within Teams.
To better connect your employees to the resources they need most, we’ve recently rolled out the ability to import global navigation items into the Viva Connections Resources tab.
We’ve also released Viva Connections on the web that brings a dynamic, beautiful app experience directly into the browser.
Enhancing Communication Capabilities
The new customizable Spotlight offers communicators a sleek, above-the-fold section to highlight key news. Up to eleven pieces of news can be added to the Spotlight carousel for announcements and campaigns that need extra emphasis and durability. In case you missed it, read more about Spotlight here.
Announcements
New communication features also enable Regional Announcements, which provides additional attribute-based targeting based on job, title, and location. This is specifically geared for reaching Frontline Workers (FLWs) working in different regions, branches, stores, or departments by using filtering.
Learn more about how to set up regional filtering and using FLW announcements. Note this feature requires Frontline licensing.
Analytics for Admins
Admins can now understand how and when users engage with components of the Viva Connections experience. You can see data on overall traffic, usage, and engagement across each of your organization’s Connections experiences. Learn more about how to access usage data here.
Dashboard Card Experiences & Bot Extensions
Dashboard cards in Viva Connections are the building blocks to a modern employee experience. We’ve focused heavily on creating and enhancing cards for all audiences. You can now personalize dashboard cards on desktop allowing your employees to customize their view by adding, removing or reordering the dashboard cards.
Here are some of the top dashboard card updates:
OneDrive Card update
This new card allows organizations to add a OneDrive Files Card to the Viva Connections dashboard, showing recently accessed, shared, or favorite files. This card is now generally available and requires no action for setup.
Pulse Card
The Viva Pulse card in Viva Connections allows you to create Pulse survey (s) via the dashboard, giving employees a quick and targeted way to share feedback and participate in workplace surveys. Once the survey is complete, the owner can view the response rate right on the card.
Assigned Tasks Card
The Assigned Tasks card automatically displays information to users about their assigned tasks to. This information is retrieved from the Tasks app in Teams and enables users to quickly take action and accomplish tasks right from their dashboard.
Learn more about our Viva Connections dashboard cards in this blog.
We hope you’re seeing how these features collectively enhance employee engagement, streamline communication, and provide valuable insights into employee interactions with the app. Keep checking back to see what we do next!
Microsoft Tech Community – Latest Blogs –Read More
How can I iterate through an array using a for loop?
I want to iterate through an array of file locations using a for loop.
My current code is something like this:
% Paths where the files are located
P1 = C:UsersmeDocuments\My Info
%Find excel files in path
%Pull data
% Write into a file
Now this code works great, but now I need to do the same thing to multiple paths while maintaining efficiency. To do this, I created an array of the paths I need to iterate through. How do I use a for loop to iterate through these paths? Here is what I have so far, but my code breaks when it tries to read the path because the text is not scalar when trying to use ‘dir’. Here is what I currently have:
% Paths where the files are located
P1 = C:UsersmeDocuments\My Info
P2 = C:UsersmeDocuments\My data
%Array of paths
Array = {‘P1, P2’}
for i = 1:length(Array)
%Find excel files in path
%Pull data
% Write into a fileI want to iterate through an array of file locations using a for loop.
My current code is something like this:
% Paths where the files are located
P1 = C:UsersmeDocuments\My Info
%Find excel files in path
%Pull data
% Write into a file
Now this code works great, but now I need to do the same thing to multiple paths while maintaining efficiency. To do this, I created an array of the paths I need to iterate through. How do I use a for loop to iterate through these paths? Here is what I have so far, but my code breaks when it tries to read the path because the text is not scalar when trying to use ‘dir’. Here is what I currently have:
% Paths where the files are located
P1 = C:UsersmeDocuments\My Info
P2 = C:UsersmeDocuments\My data
%Array of paths
Array = {‘P1, P2’}
for i = 1:length(Array)
%Find excel files in path
%Pull data
% Write into a file I want to iterate through an array of file locations using a for loop.
My current code is something like this:
% Paths where the files are located
P1 = C:UsersmeDocuments\My Info
%Find excel files in path
%Pull data
% Write into a file
Now this code works great, but now I need to do the same thing to multiple paths while maintaining efficiency. To do this, I created an array of the paths I need to iterate through. How do I use a for loop to iterate through these paths? Here is what I have so far, but my code breaks when it tries to read the path because the text is not scalar when trying to use ‘dir’. Here is what I currently have:
% Paths where the files are located
P1 = C:UsersmeDocuments\My Info
P2 = C:UsersmeDocuments\My data
%Array of paths
Array = {‘P1, P2’}
for i = 1:length(Array)
%Find excel files in path
%Pull data
% Write into a file matlab, for loop, array MATLAB Answers — New Questions
Using experimental data on geotrajectory function and checking trajectory dynamics with lookuPose function (SATCOM toolbox)
Hello everyone,
Im using SATCOM toolbox to evaluate a SATCOM link.
I have experimental flight profile data with a samplerate of 100Hz, that im using in the geotrajectory function
trajectory = geoTrajectory(Waypoints=[lat lon alt],TimeOfArrival=time,Velocities=[vnedx vnedy vnedz],ReferenceFrame="NED",Orientation=Euler);
then im using the lookupPose function to extract dynamical information
[position,orientation,velocity,acceleration,angularVelocity] = lookupPose(trajectory,time);
Finally, Im comparing the experimental data with the information provided by lookupPose.
Position, orientation and velocity matched the experimental data that was provided in the geotrajectory function.
I derived experimental acceleration using a forward difference numerical derivative of the experimental velocity data. When I compared this experimental acceleration data to the acceleration provided by the lookupPose, the results did not match exactly for velocity in x and y, but they were comparable. This is expected since the lookupPose might be using a different derivative method (see Figure below). However the velocity in z did not match at all.
The results shown above are derived using a sample rate of 1Hz ( I downsampled the experimental data). The problem arises when I increase the sample rate for example to 10 Hz. As seen in the images below the acceleration provide by the lookupPose function goes bersek.
My questions are:
Does the lookupPose function has a minimum sample rate limit (1Hz).
What is the numerical derivative used by the lookupPose function to calculate acceleration from velocity?
Is there a way to change the numerical derivative used by lookupPose to calculate acceleration?
Why does the Z component of acceleration does not match for a sample rate of 1Hz (even worse for 0.1 Hz).
As a reference these are the comparitions between experimental data of velocity ( given to geotrajetory ) and what the lookuppose outputs, (this comparisson is for 10Hz). The results are exactly the same.
Any help or guidance you could provide would be greatly appreciated. Thank you in advance for your assistance!.Hello everyone,
Im using SATCOM toolbox to evaluate a SATCOM link.
I have experimental flight profile data with a samplerate of 100Hz, that im using in the geotrajectory function
trajectory = geoTrajectory(Waypoints=[lat lon alt],TimeOfArrival=time,Velocities=[vnedx vnedy vnedz],ReferenceFrame="NED",Orientation=Euler);
then im using the lookupPose function to extract dynamical information
[position,orientation,velocity,acceleration,angularVelocity] = lookupPose(trajectory,time);
Finally, Im comparing the experimental data with the information provided by lookupPose.
Position, orientation and velocity matched the experimental data that was provided in the geotrajectory function.
I derived experimental acceleration using a forward difference numerical derivative of the experimental velocity data. When I compared this experimental acceleration data to the acceleration provided by the lookupPose, the results did not match exactly for velocity in x and y, but they were comparable. This is expected since the lookupPose might be using a different derivative method (see Figure below). However the velocity in z did not match at all.
The results shown above are derived using a sample rate of 1Hz ( I downsampled the experimental data). The problem arises when I increase the sample rate for example to 10 Hz. As seen in the images below the acceleration provide by the lookupPose function goes bersek.
My questions are:
Does the lookupPose function has a minimum sample rate limit (1Hz).
What is the numerical derivative used by the lookupPose function to calculate acceleration from velocity?
Is there a way to change the numerical derivative used by lookupPose to calculate acceleration?
Why does the Z component of acceleration does not match for a sample rate of 1Hz (even worse for 0.1 Hz).
As a reference these are the comparitions between experimental data of velocity ( given to geotrajetory ) and what the lookuppose outputs, (this comparisson is for 10Hz). The results are exactly the same.
Any help or guidance you could provide would be greatly appreciated. Thank you in advance for your assistance!. Hello everyone,
Im using SATCOM toolbox to evaluate a SATCOM link.
I have experimental flight profile data with a samplerate of 100Hz, that im using in the geotrajectory function
trajectory = geoTrajectory(Waypoints=[lat lon alt],TimeOfArrival=time,Velocities=[vnedx vnedy vnedz],ReferenceFrame="NED",Orientation=Euler);
then im using the lookupPose function to extract dynamical information
[position,orientation,velocity,acceleration,angularVelocity] = lookupPose(trajectory,time);
Finally, Im comparing the experimental data with the information provided by lookupPose.
Position, orientation and velocity matched the experimental data that was provided in the geotrajectory function.
I derived experimental acceleration using a forward difference numerical derivative of the experimental velocity data. When I compared this experimental acceleration data to the acceleration provided by the lookupPose, the results did not match exactly for velocity in x and y, but they were comparable. This is expected since the lookupPose might be using a different derivative method (see Figure below). However the velocity in z did not match at all.
The results shown above are derived using a sample rate of 1Hz ( I downsampled the experimental data). The problem arises when I increase the sample rate for example to 10 Hz. As seen in the images below the acceleration provide by the lookupPose function goes bersek.
My questions are:
Does the lookupPose function has a minimum sample rate limit (1Hz).
What is the numerical derivative used by the lookupPose function to calculate acceleration from velocity?
Is there a way to change the numerical derivative used by lookupPose to calculate acceleration?
Why does the Z component of acceleration does not match for a sample rate of 1Hz (even worse for 0.1 Hz).
As a reference these are the comparitions between experimental data of velocity ( given to geotrajetory ) and what the lookuppose outputs, (this comparisson is for 10Hz). The results are exactly the same.
Any help or guidance you could provide would be greatly appreciated. Thank you in advance for your assistance!. satellite communication toolbox, lookuppose function, acceleration MATLAB Answers — New Questions
SharePoint Video Transcript Automated File Create and Download
For every video uploaded to SharePoint, transcripts are produced. However, we need a separate file (word document) containing the transcript text for each video. We can manually download the transcript for each video from SharePoint, but our aim is to automate this process. Ideally, every time a video is uploaded to SharePoint, a transcript would be generated, and the corresponding file would be automatically downloaded and saved in the same SharePoint folder.
We attempted to use Power Automate for this task, but after several months of working with MS support and the Product Groups it seems that this is not feasible, and they do not intend to address this issue.
I am hoping someone in this community can help us find a way to accomplish this goal using Power Automate.
For every video uploaded to SharePoint, transcripts are produced. However, we need a separate file (word document) containing the transcript text for each video. We can manually download the transcript for each video from SharePoint, but our aim is to automate this process. Ideally, every time a video is uploaded to SharePoint, a transcript would be generated, and the corresponding file would be automatically downloaded and saved in the same SharePoint folder. We attempted to use Power Automate for this task, but after several months of working with MS support and the Product Groups it seems that this is not feasible, and they do not intend to address this issue. I am hoping someone in this community can help us find a way to accomplish this goal using Power Automate. Read More
Calculated Column to Average numbers in column, dividing by number of columns with values
I have a SP list that will have some columns populated and some left blank. Each column is scored out of 5. If i have 3 columns with 5 and 3 columns left blank I would like the calculated column to see 3 values, add them and divide by the number of columns with values.
So in this case it would see 5,5,5 totalling 15 and divide by only 3 to give me an average of 5. Currently it would divide by 6 columns.
I have a SP list that will have some columns populated and some left blank. Each column is scored out of 5. If i have 3 columns with 5 and 3 columns left blank I would like the calculated column to see 3 values, add them and divide by the number of columns with values. So in this case it would see 5,5,5 totalling 15 and divide by only 3 to give me an average of 5. Currently it would divide by 6 columns. Read More
OneNote notebook share permissions unexpectantly change from edit to view
I have a user who has shared their notebook with over a dozen users and has granted them edit permissions. They are reporting that occasionally (it has happened more than once) that the permissions for the other users changes to view for no apparent reason. The notebook owner, to fix the issue, needs to reshare the notebook with the correct permissions. They are getting frustrated that they have to do this at all.
Is there a scenario that might explain why this is happening? Is this a bug?
Please advise.
I have a user who has shared their notebook with over a dozen users and has granted them edit permissions. They are reporting that occasionally (it has happened more than once) that the permissions for the other users changes to view for no apparent reason. The notebook owner, to fix the issue, needs to reshare the notebook with the correct permissions. They are getting frustrated that they have to do this at all.Is there a scenario that might explain why this is happening? Is this a bug?Please advise. Read More