Category: News
How to solve the the parameter ‘SampleTime’ must be a real double scalar (period) or a real double vector of length 2 (period, offset).
the parameter ‘SampleTime’ must be a real double scalar (period) or a real double vector of length 2 (period, offset); where period, offset must be finite and non-negative and offset must be less than period.the parameter ‘SampleTime’ must be a real double scalar (period) or a real double vector of length 2 (period, offset); where period, offset must be finite and non-negative and offset must be less than period. the parameter ‘SampleTime’ must be a real double scalar (period) or a real double vector of length 2 (period, offset); where period, offset must be finite and non-negative and offset must be less than period. muthukumar ganesan MATLAB Answers — New Questions
Rename files in a folder
Hello. I have 21841 TIFF images in a folder with names in the format Camera10001, Camera10002,….Camera121841. I want to rename these files as:
Camera10001 to Camera0001, …. Camera121841 to Camera21841.
% Specify the input and output directories
input_directory = ‘D:ImagesTestCamera_1’;
output_directory = ‘D:ImagesTestCamera_1’;
% Ensure the output directory exists
if ~exist(output_directory, ‘dir’)
mkdir(output_directory);
endHello. I have 21841 TIFF images in a folder with names in the format Camera10001, Camera10002,….Camera121841. I want to rename these files as:
Camera10001 to Camera0001, …. Camera121841 to Camera21841.
% Specify the input and output directories
input_directory = ‘D:ImagesTestCamera_1’;
output_directory = ‘D:ImagesTestCamera_1’;
% Ensure the output directory exists
if ~exist(output_directory, ‘dir’)
mkdir(output_directory);
end Hello. I have 21841 TIFF images in a folder with names in the format Camera10001, Camera10002,….Camera121841. I want to rename these files as:
Camera10001 to Camera0001, …. Camera121841 to Camera21841.
% Specify the input and output directories
input_directory = ‘D:ImagesTestCamera_1’;
output_directory = ‘D:ImagesTestCamera_1’;
% Ensure the output directory exists
if ~exist(output_directory, ‘dir’)
mkdir(output_directory);
end rename, matlab MATLAB Answers — New Questions
Requirements to transact with indirect CSP in another region
Hi,
We’re a direct CSP partner in Europe and the CEE regions and we mainly transact in Business Applications (BC, FO and CRM). We’ve started getting more business in Latin America and until now we’ve handled it the old-fashionde way, with on-prem licensing, hosting on Azure VMs etc.
We’re exploring how to move away from this in this region and sell SaaS Biz Apps through CSP. I’m trying to understand the requirements to work with an indirect provider in this region, and mainly – is there any Microsoft requirement that we have a legal entity in that same region (Latin America)? Or we can transact with them through the same entities in Europe that have the direct CSP relationship?
Any help is appreciated!
Hi, We’re a direct CSP partner in Europe and the CEE regions and we mainly transact in Business Applications (BC, FO and CRM). We’ve started getting more business in Latin America and until now we’ve handled it the old-fashionde way, with on-prem licensing, hosting on Azure VMs etc. We’re exploring how to move away from this in this region and sell SaaS Biz Apps through CSP. I’m trying to understand the requirements to work with an indirect provider in this region, and mainly – is there any Microsoft requirement that we have a legal entity in that same region (Latin America)? Or we can transact with them through the same entities in Europe that have the direct CSP relationship? Any help is appreciated! Read More
Hide/unhide rows using a button
Hello everyone.
I am trying to configure a button to hide/unhide several rows at a time.
I am following these steps:
1) Adding a toggle button in the Active X control
2) Then I double click in the button, and paste the following code:
Private Sub ToggleButton1_Click()
Dim xAddress As String
Dim splitAddress As Variant
xAddress = “4:7”
splitAddress = Split(xAddress, “,”)
If ToggleButton1.Value Then
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = True
ToggleButton1.Caption = “+”
Next Var
Else
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = False
ToggleButton1.Caption = “-“
Next Var
End If
End Sub
3) I insert a new button following the same procedure, double click it and add code for the new button, with a different set of rows. Now it looks like this:
Private Sub ToggleButton1_Click()
Dim xAddress As String
Dim splitAddress As Variant
xAddress = “4:7”
splitAddress = Split(xAddress, “,”)
If ToggleButton1.Value Then
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = True
ToggleButton1.Caption = “+”
Next Var
Else
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = False
ToggleButton1.Caption = “-“
Next Var
End If
End Sub
Private Sub ToggleButton2_Click()
Dim xAddress As String
Dim splitAddress As Variant
xAddress = “9:14”
splitAddress = Split(xAddress, “,”)
If ToggleButton1.Value Then
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = True
ToggleButton1.Caption = “+”
Next Var
Else
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = False
ToggleButton1.Caption = “-“
Next Var
End If
End Sub
The first toggle button is working fine, but the second is not, even when is the same code.
What am I doing wrong here?
Thanks.
Hello everyone. I am trying to configure a button to hide/unhide several rows at a time.I am following these steps: 1) Adding a toggle button in the Active X control 2) Then I double click in the button, and paste the following code: Private Sub ToggleButton1_Click()
Dim xAddress As String
Dim splitAddress As Variant
xAddress = “4:7”
splitAddress = Split(xAddress, “,”)
If ToggleButton1.Value Then
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = True
ToggleButton1.Caption = “+”
Next Var
Else
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = False
ToggleButton1.Caption = “-“
Next Var
End If
End Sub 3) I insert a new button following the same procedure, double click it and add code for the new button, with a different set of rows. Now it looks like this: Private Sub ToggleButton1_Click()
Dim xAddress As String
Dim splitAddress As Variant
xAddress = “4:7”
splitAddress = Split(xAddress, “,”)
If ToggleButton1.Value Then
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = True
ToggleButton1.Caption = “+”
Next Var
Else
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = False
ToggleButton1.Caption = “-“
Next Var
End If
End Sub
Private Sub ToggleButton2_Click()
Dim xAddress As String
Dim splitAddress As Variant
xAddress = “9:14”
splitAddress = Split(xAddress, “,”)
If ToggleButton1.Value Then
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = True
ToggleButton1.Caption = “+”
Next Var
Else
For Each Var In splitAddress
Application.ActiveSheet.Rows(Var).Hidden = False
ToggleButton1.Caption = “-“
Next Var
End If
End Sub The first toggle button is working fine, but the second is not, even when is the same code.What am I doing wrong here?Thanks. Read More
Notifications when someone joins a Meeting
Hi!
Is there any option to enable notification if someone joins a Meeting not using dial-in numbers, just regular meetings on the windows app?
I followed this documentation https://learn.microsoft.com/en-us/microsoftteams/turn-on-or-off-entry-and-exit-announcements-for-meetings-in-teams but I could not find the Conference Bridges option on the admin pannel.
Is there any place where I can request for this feature?
Thanks in advance! 😀
Hi! Is there any option to enable notification if someone joins a Meeting not using dial-in numbers, just regular meetings on the windows app? I followed this documentation https://learn.microsoft.com/en-us/microsoftteams/turn-on-or-off-entry-and-exit-announcements-for-meetings-in-teams but I could not find the Conference Bridges option on the admin pannel. Is there any place where I can request for this feature? Thanks in advance! 😀 Read More
Problem with value property of uidropdown
Hi,
I’m using a uidropdown control with the Items and ItemsData properties set within the method startupFcn of my app. I’m using the following simple code to specify the items of the dropdown control along with numeric IDs:
app.MethodDropDown.Items = Methods.TYPES(:, 1);
app.MethodDropDown.ItemsData = [Methods.TYPES{:, 2}];
Methods.Types is a cell-array in class Methods with the first column containing character arrays (i.e. the names for the method types) and the second column contains numeric ID values for the method types.
When retrieving the value of the selected item I observe a different behavior between different MATLAB versions. Up to 2022b the Value property returns the numeric value of the selected item as specified in ItemsData. However, starting with 2023a, a string (i.e. in my case a character array) is returned.
Am I doing something wrong? I suspect that something changed between 2022b and 2023a but I can’t find anything about such a change in the changelog of MATLAB. Moreover, the documentation of 2023a still states that my code seems to be correct.
Best,
MichaelHi,
I’m using a uidropdown control with the Items and ItemsData properties set within the method startupFcn of my app. I’m using the following simple code to specify the items of the dropdown control along with numeric IDs:
app.MethodDropDown.Items = Methods.TYPES(:, 1);
app.MethodDropDown.ItemsData = [Methods.TYPES{:, 2}];
Methods.Types is a cell-array in class Methods with the first column containing character arrays (i.e. the names for the method types) and the second column contains numeric ID values for the method types.
When retrieving the value of the selected item I observe a different behavior between different MATLAB versions. Up to 2022b the Value property returns the numeric value of the selected item as specified in ItemsData. However, starting with 2023a, a string (i.e. in my case a character array) is returned.
Am I doing something wrong? I suspect that something changed between 2022b and 2023a but I can’t find anything about such a change in the changelog of MATLAB. Moreover, the documentation of 2023a still states that my code seems to be correct.
Best,
Michael Hi,
I’m using a uidropdown control with the Items and ItemsData properties set within the method startupFcn of my app. I’m using the following simple code to specify the items of the dropdown control along with numeric IDs:
app.MethodDropDown.Items = Methods.TYPES(:, 1);
app.MethodDropDown.ItemsData = [Methods.TYPES{:, 2}];
Methods.Types is a cell-array in class Methods with the first column containing character arrays (i.e. the names for the method types) and the second column contains numeric ID values for the method types.
When retrieving the value of the selected item I observe a different behavior between different MATLAB versions. Up to 2022b the Value property returns the numeric value of the selected item as specified in ItemsData. However, starting with 2023a, a string (i.e. in my case a character array) is returned.
Am I doing something wrong? I suspect that something changed between 2022b and 2023a but I can’t find anything about such a change in the changelog of MATLAB. Moreover, the documentation of 2023a still states that my code seems to be correct.
Best,
Michael uidropdown, value, items, itemsdata MATLAB Answers — New Questions
slhostlibcantransmit.dll INITIALIZE Error when I try to connect to my ECU through XCP on CAN (using Vehicle Network Toolbox blocks)
I am trying to read an ECU variable using Vehicle Network Toolbox blocks on my simulink model. The a2l file is added in the XCP CAN Configuration block. The XCP CAN Data Acquisiton block is used for getting the measurement I want to read and the XCP CAN Transport Layer block is used for connecting to the XCP channel which is through a Kvaser device.
On running the model, I get the following error:
=== Diagnostics ===
Error:Error running ‘HVS_Model_V01_CD6_TestPC’ on target computer: Unable to load ‘HVS_Model_V01_CD6_TestPC’ on target computer ‘TargetPC1’: HVS_Model_V01_CD6_TestPC:INITIALIZE ERROR:Could not open library: slhostlibcantransmit.dll
Can anyone help me out?I am trying to read an ECU variable using Vehicle Network Toolbox blocks on my simulink model. The a2l file is added in the XCP CAN Configuration block. The XCP CAN Data Acquisiton block is used for getting the measurement I want to read and the XCP CAN Transport Layer block is used for connecting to the XCP channel which is through a Kvaser device.
On running the model, I get the following error:
=== Diagnostics ===
Error:Error running ‘HVS_Model_V01_CD6_TestPC’ on target computer: Unable to load ‘HVS_Model_V01_CD6_TestPC’ on target computer ‘TargetPC1’: HVS_Model_V01_CD6_TestPC:INITIALIZE ERROR:Could not open library: slhostlibcantransmit.dll
Can anyone help me out? I am trying to read an ECU variable using Vehicle Network Toolbox blocks on my simulink model. The a2l file is added in the XCP CAN Configuration block. The XCP CAN Data Acquisiton block is used for getting the measurement I want to read and the XCP CAN Transport Layer block is used for connecting to the XCP channel which is through a Kvaser device.
On running the model, I get the following error:
=== Diagnostics ===
Error:Error running ‘HVS_Model_V01_CD6_TestPC’ on target computer: Unable to load ‘HVS_Model_V01_CD6_TestPC’ on target computer ‘TargetPC1’: HVS_Model_V01_CD6_TestPC:INITIALIZE ERROR:Could not open library: slhostlibcantransmit.dll
Can anyone help me out? xcponcan, vehiclenetworktoolbox, vnt, slhostlibcantransmit.dll MATLAB Answers — New Questions
Index exceeds the number of array elements
Hi,
I got the error written below.
Index exceeds the number of array elements. Index must not exceed 2.
Error in MasterPlan_RCC_V2_2(line 73)
CHG_step = CHG_step(1:Inputs_RCC.CyclesxcRate); % Based on how many cycles x C-rate
Line 73 is written in bold black.
Tolerance_D = abs(Files.PreProcessedData{idx}.Current_A – Rated_Cap*Inputs_RCC.cRate_DCH) < AcceptedErrorCurrent;
RCC_Step_CHG = {}; % Find the unique steps for the Discharge rates
for i = 1:size(Inputs_RCC.cRates_CHG,1)
Tolerance_C = abs(Files.PreProcessedData{idx}.Current_A – Rated_Cap*cell2mat(Inputs_RCC.cRates_CHG(i))) < AcceptedErrorCurrent;
% Record the unique step if it’s CC step, charge and the C-Rate is the one from the pulses
if i == 1
CHG_step = Files.PreProcessedData{idx}.FlagUniqueStep(Tolerance_C & contains(Files.PreProcessedData{idx}.Mode, "C_CC"));
CHG_step = unique(CHG_step);
CHG_step = CHG_step(CHG_step > Cap_Check_Steps(end)); % Take the steps after the cap check not to repeat them
CHG_step = CHG_step(1:Inputs_RCC.CyclesxcRate); % Based on how many cycles x C-rate
RCC_Step_CHG = [RCC_Step_CHG; num2cell(CHG_step)];
This is for test protocol of battery. So, the protocol is shown below:
"CHG step (Charge step), C-rates are C/, C/3, C/2, 1C and 2C."
Charge Steps 3 cycles at each C-rate
C/5 with C/20 cut-off
C/3 with C/20 cut-off
C/2 with C/20 cut-off
1C with C/20 cut-off
"2C
with C/20 cut-off"
Can someone please help me?Hi,
I got the error written below.
Index exceeds the number of array elements. Index must not exceed 2.
Error in MasterPlan_RCC_V2_2(line 73)
CHG_step = CHG_step(1:Inputs_RCC.CyclesxcRate); % Based on how many cycles x C-rate
Line 73 is written in bold black.
Tolerance_D = abs(Files.PreProcessedData{idx}.Current_A – Rated_Cap*Inputs_RCC.cRate_DCH) < AcceptedErrorCurrent;
RCC_Step_CHG = {}; % Find the unique steps for the Discharge rates
for i = 1:size(Inputs_RCC.cRates_CHG,1)
Tolerance_C = abs(Files.PreProcessedData{idx}.Current_A – Rated_Cap*cell2mat(Inputs_RCC.cRates_CHG(i))) < AcceptedErrorCurrent;
% Record the unique step if it’s CC step, charge and the C-Rate is the one from the pulses
if i == 1
CHG_step = Files.PreProcessedData{idx}.FlagUniqueStep(Tolerance_C & contains(Files.PreProcessedData{idx}.Mode, "C_CC"));
CHG_step = unique(CHG_step);
CHG_step = CHG_step(CHG_step > Cap_Check_Steps(end)); % Take the steps after the cap check not to repeat them
CHG_step = CHG_step(1:Inputs_RCC.CyclesxcRate); % Based on how many cycles x C-rate
RCC_Step_CHG = [RCC_Step_CHG; num2cell(CHG_step)];
This is for test protocol of battery. So, the protocol is shown below:
"CHG step (Charge step), C-rates are C/, C/3, C/2, 1C and 2C."
Charge Steps 3 cycles at each C-rate
C/5 with C/20 cut-off
C/3 with C/20 cut-off
C/2 with C/20 cut-off
1C with C/20 cut-off
"2C
with C/20 cut-off"
Can someone please help me? Hi,
I got the error written below.
Index exceeds the number of array elements. Index must not exceed 2.
Error in MasterPlan_RCC_V2_2(line 73)
CHG_step = CHG_step(1:Inputs_RCC.CyclesxcRate); % Based on how many cycles x C-rate
Line 73 is written in bold black.
Tolerance_D = abs(Files.PreProcessedData{idx}.Current_A – Rated_Cap*Inputs_RCC.cRate_DCH) < AcceptedErrorCurrent;
RCC_Step_CHG = {}; % Find the unique steps for the Discharge rates
for i = 1:size(Inputs_RCC.cRates_CHG,1)
Tolerance_C = abs(Files.PreProcessedData{idx}.Current_A – Rated_Cap*cell2mat(Inputs_RCC.cRates_CHG(i))) < AcceptedErrorCurrent;
% Record the unique step if it’s CC step, charge and the C-Rate is the one from the pulses
if i == 1
CHG_step = Files.PreProcessedData{idx}.FlagUniqueStep(Tolerance_C & contains(Files.PreProcessedData{idx}.Mode, "C_CC"));
CHG_step = unique(CHG_step);
CHG_step = CHG_step(CHG_step > Cap_Check_Steps(end)); % Take the steps after the cap check not to repeat them
CHG_step = CHG_step(1:Inputs_RCC.CyclesxcRate); % Based on how many cycles x C-rate
RCC_Step_CHG = [RCC_Step_CHG; num2cell(CHG_step)];
This is for test protocol of battery. So, the protocol is shown below:
"CHG step (Charge step), C-rates are C/, C/3, C/2, 1C and 2C."
Charge Steps 3 cycles at each C-rate
C/5 with C/20 cut-off
C/3 with C/20 cut-off
C/2 with C/20 cut-off
1C with C/20 cut-off
"2C
with C/20 cut-off"
Can someone please help me? index exceeds, number of array MATLAB Answers — New Questions
Exchange Online’s New High Volume Email (HVE) Solution
The Exchange Online High-Volume Email (HVE) solution handles up to 100,000 internal messages and 2,000 external messages daily. It’s intended to replace on-premises Exchange servers that organizations keep just to service email submission from devices and applications. In this review of the preview version, we discovered that almost everything works just fine, if you keep within the throttling limits.
https://practical365.com/exchange-online-hve/
The Exchange Online High-Volume Email (HVE) solution handles up to 100,000 internal messages and 2,000 external messages daily. It’s intended to replace on-premises Exchange servers that organizations keep just to service email submission from devices and applications. In this review of the preview version, we discovered that almost everything works just fine, if you keep within the throttling limits.
https://practical365.com/exchange-online-hve/ Read More
How to save a prompt in Teams?
Is it possible to save prompts in Copilot Chat in Teams? Doc says “Select the Save prompt button on the prompt to save it”. But there is no such button (neither permanent no if hover over it) available for me.
Is it possible to save prompts in Copilot Chat in Teams? Doc says “Select the Save prompt button on the prompt to save it”. But there is no such button (neither permanent no if hover over it) available for me. Read More
draw polygon continuously with mouse
לק"י
Hi guys,
I need to contour some cells. I want to use the drawpolygon command, or an equivalent of it, that will record mouse position continuously while mouse left click button is held. No such option seems to be in the drawpolygon documentation.
There are some old answers about how to do it, the problem is that most of the codes there somewhy don’t work when I try to use them. Is there any other easy/quick way to obtain mouse position only when left mouse button is held?
Thanks,
Amit.לק"י
Hi guys,
I need to contour some cells. I want to use the drawpolygon command, or an equivalent of it, that will record mouse position continuously while mouse left click button is held. No such option seems to be in the drawpolygon documentation.
There are some old answers about how to do it, the problem is that most of the codes there somewhy don’t work when I try to use them. Is there any other easy/quick way to obtain mouse position only when left mouse button is held?
Thanks,
Amit. לק"י
Hi guys,
I need to contour some cells. I want to use the drawpolygon command, or an equivalent of it, that will record mouse position continuously while mouse left click button is held. No such option seems to be in the drawpolygon documentation.
There are some old answers about how to do it, the problem is that most of the codes there somewhy don’t work when I try to use them. Is there any other easy/quick way to obtain mouse position only when left mouse button is held?
Thanks,
Amit. drawpolygon, mouse position, cell contour, contour MATLAB Answers — New Questions
Store a script as a function
I made some changes in an already existing function file "randomstart" downloaded from Mathworks reinforcement learning on ramp course. When I made few changes in that file and tried to save it, I got the message as shown in the pic attached
when I clicked on the overwrite button, the script file no longer remains a function file. It simply changes to an ordinary .mlx file which cannot be called from the main function of trainDDPG.mlx. Similar is the case with ‘Select Another File…" option. Can anyone help me what to do? ThanksI made some changes in an already existing function file "randomstart" downloaded from Mathworks reinforcement learning on ramp course. When I made few changes in that file and tried to save it, I got the message as shown in the pic attached
when I clicked on the overwrite button, the script file no longer remains a function file. It simply changes to an ordinary .mlx file which cannot be called from the main function of trainDDPG.mlx. Similar is the case with ‘Select Another File…" option. Can anyone help me what to do? Thanks I made some changes in an already existing function file "randomstart" downloaded from Mathworks reinforcement learning on ramp course. When I made few changes in that file and tried to save it, I got the message as shown in the pic attached
when I clicked on the overwrite button, the script file no longer remains a function file. It simply changes to an ordinary .mlx file which cannot be called from the main function of trainDDPG.mlx. Similar is the case with ‘Select Another File…" option. Can anyone help me what to do? Thanks save, function MATLAB Answers — New Questions
How to remove the error “Can not resolve Simulink signal object for output port” in matlab 2009b
Hello
Im experiencing an error in simulink "Can not resolve Simulink signal object for output port" in Matlab 2009b
Can someone suggest the any ideas on how to resolve this?
Thank youHello
Im experiencing an error in simulink "Can not resolve Simulink signal object for output port" in Matlab 2009b
Can someone suggest the any ideas on how to resolve this?
Thank you Hello
Im experiencing an error in simulink "Can not resolve Simulink signal object for output port" in Matlab 2009b
Can someone suggest the any ideas on how to resolve this?
Thank you matlab, simulink, signal MATLAB Answers — New Questions
Why i am getting this kind of warning in my code outer loop index i is inside the nested function
Why i am getting this kind of warning in my code outer loop index i is inside the nested function. i shared the code file. kindly guide me what to do next.Why i am getting this kind of warning in my code outer loop index i is inside the nested function. i shared the code file. kindly guide me what to do next. Why i am getting this kind of warning in my code outer loop index i is inside the nested function. i shared the code file. kindly guide me what to do next. matlab code MATLAB Answers — New Questions
Unable to delete derived entry in sldd
When I try to delete data dictionary (*.sldd) entries, I get the error "Unable to delete derived entry".
I searched for this error in the documentation and online but could not find what is the cause of this error.When I try to delete data dictionary (*.sldd) entries, I get the error "Unable to delete derived entry".
I searched for this error in the documentation and online but could not find what is the cause of this error. When I try to delete data dictionary (*.sldd) entries, I get the error "Unable to delete derived entry".
I searched for this error in the documentation and online but could not find what is the cause of this error. data dictionary, matlab, simulink MATLAB Answers — New Questions
MDI Sensors bandwith usage
Good morning, is it possible to understand or estimate the bandwidth usage of sensors in an environment with around 30 domain controllers and 10,000 users?
Is there any documentation regards this topic?
Thanks a lot
Good morning, is it possible to understand or estimate the bandwidth usage of sensors in an environment with around 30 domain controllers and 10,000 users?Is there any documentation regards this topic? Thanks a lot Read More
Forms – Polls in teams
Hi,
I used to prepare Forms questions and polls and launch theim during teams meeting.
As Forms is not working anymore in teams, how can I do the same thing with the new app “Polls” (preparing questions and launching theim at the right time) ?
Hi, I used to prepare Forms questions and polls and launch theim during teams meeting. As Forms is not working anymore in teams, how can I do the same thing with the new app “Polls” (preparing questions and launching theim at the right time) ? Read More
“Bookings with me” does not show calender events
I’ve been experiencing issues with the “Bookings with me” feature over the past few weeks or months. Previously, it functioned correctly, only displaying time slots when I was available. However, it now respects my working hours but fails to indicate whether I’m already booked or not. Even when I schedule an event through the booking page, it gets added to my calendar, but the time slot remains available for further bookings.
In contrast, the public link to my calendar displays all events as expected.
I’ve tested this issue with a colleague’s booking page, and it worked without any problems. Does anyone have any suggestions on how to resolve this issue?
Greetings from Germany,
Thorsten
I’ve been experiencing issues with the “Bookings with me” feature over the past few weeks or months. Previously, it functioned correctly, only displaying time slots when I was available. However, it now respects my working hours but fails to indicate whether I’m already booked or not. Even when I schedule an event through the booking page, it gets added to my calendar, but the time slot remains available for further bookings.In contrast, the public link to my calendar displays all events as expected.I’ve tested this issue with a colleague’s booking page, and it worked without any problems. Does anyone have any suggestions on how to resolve this issue? Greetings from Germany,Thorsten Read More
Microsoft to Charge for Unlicensed OneDrive for Business Accounts
Microsoft plans to archive unlicensed OneDrive sites starting in January 2025. The obsolete sites will end up in Microsoft 365 archive, from where the sites can be reactivated for a small per-gigabyte fee. Archived sites are indexed and discoverable. However, the message is clear: remove unlicensed OneDrive sites now. They’re only cluttering up your digital landscape and might give Copilot for Microsoft 365 a headache.
https://office365itpros.com/2024/07/30/unlicensed-onedrive-sites-archive/
Microsoft plans to archive unlicensed OneDrive sites starting in January 2025. The obsolete sites will end up in Microsoft 365 archive, from where the sites can be reactivated for a small per-gigabyte fee. Archived sites are indexed and discoverable. However, the message is clear: remove unlicensed OneDrive sites now. They’re only cluttering up your digital landscape and might give Copilot for Microsoft 365 a headache.
https://office365itpros.com/2024/07/30/unlicensed-onedrive-sites-archive/ Read More