News | Application Package Repository Telkom University

Category: News

Hi I am triying to run a Processor in the Loop simulation using a LaunchPad XL C2000 TMS320F28069M, however when I tried to deploy my model to hardware i got the next error:

/ 2024-08-14 / Matlab

PD: I can run the examples for the C2000 processor, but i cannot deploy a NLARX model thay estimated using the System Identification Toolbox
=== Subsystem Build (Elapsed: 49 sec) ===
The model pil is configured to simulate flush-to-zero (FTZ) behavior, but is using normal mode simulation. To observe FTZ behavior, simulate the model using an accelerated mode.
### Starting build procedure for: model
### Generating code and artifacts to ‘Model specific’ folder structure
### Generating code into build folder: C:testmodel_ert_rtw
The model model is configured to simulate flush-to-zero (FTZ) behavior, but is using normal mode simulation. To observe FTZ behavior, simulate the model using an accelerated mode.
### Invoking Target Language Compiler on model.rtw
### Using System Target File: C:Program FilesMATLABR2024artwcertert.tlc
### Loading TLC function libraries
……..
### Generating TLC interface API for custom data
### Initial pass through model to cache user defined code
….
### Caching model source code
…………………………………………………………………….
……….
### Writing header file model_types.h
.
### Writing header file model.h
### Writing header file rtwtypes.h
### Writing source file model.c
### Writing header file model_private.h
### Writing header file rt_nonfinite.h
.
### Writing source file rt_nonfinite.c
### Writing header file rtGetInf.h
### Writing source file rtGetInf.c
### Writing header file rtGetNaN.h
### Writing source file rtGetNaN.c
.
### Writing source file model_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete (took 8.418s).
### Saving binary information cache.
### Using toolchain: Texas Instruments Code Composer Studio (C2000)
### Creating ‘C:testmodel_ert_rtwinstrumentedmodel.mk’ …
### Building ‘model’: "C:PROGRA~1MATLABR2024abinwin64gmake" DEPRULES=1 -j7 -f model.mk buildobj
..
C:testmodel_ert_rtwinstrumented>cd .

C:testmodel_ert_rtwinstrumented>chcp 1252
Pßgina de c¾digos activa: 1252

C:testmodel_ert_rtwinstrumented>if "buildobj" == "" ("C:PROGRA~1MATLABR2024abinwin64gmake" DEPRULES=1 -j7 -f model.mk all ) else ("C:PROGRA~1MATLABR2024abinwin64gmake" DEPRULES=1 -j7 -f model.mk buildobj )
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="rt_matrx.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="rt_matrx.obj" "C:/PROGRA~1/MATLAB/R2024a/rtw/c/src/rt_matrx.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="rt_printf.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="rt_printf.obj" "C:/PROGRA~1/MATLAB/R2024a/rtw/c/src/rt_printf.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="MW_c28xx_csl.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="MW_c28xx_csl.obj" "C:/test/model_ert_rtw/MW_c28xx_csl.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="MW_c28xx_board.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="MW_c28xx_board.obj" "C:/test/model_ert_rtw/MW_c28xx_board.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="model.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="model.obj" "C:/test/model_ert_rtw/model.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="model_data.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="model_data.obj" "C:/test/model_ert_rtw/model_data.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="rtGetInf.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="rtGetInf.obj" "C:/test/model_ert_rtw/rtGetInf.c"
"C:/PROGRA~1/MATLAB/R2024a/simulink/include/simstruc.h", line 4554: warning: unrecognized #pragma
"C:/PROGRA~1/MATLAB/R2024a/simulink/include/simstruc.h", line 4554: warning: unrecognized #pragma
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="rtGetNaN.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="rtGetNaN.obj" "C:/test/model_ert_rtw/rtGetNaN.c"
"C:/PROGRA~1/MATLAB/R2024a/simulink/include/simstruc.h", line 4554: warning: unrecognized #pragma
"C:/PROGRA~1/MATLAB/R2024a/simulink/include/simstruc.h", line 4554: warning: unrecognized #pragma
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="rt_nonfinite.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="rt_nonfinite.obj" "C:/test/model_ert_rtw/rt_nonfinite.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="sfunsigmoidnet.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="sfunsigmoidnet.obj" "C:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src/sfunsigmoidnet.c"
"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/bin/cl2000" –abi=coffabi –compile_only –preproc_dependency="eval_sigmoidnet.dep" –preproc_with_compile –large_memory_model –silicon_version=28 –define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/tic2000/3P778C~1.INS/TIC28X~1.INS/TI-CGT~1.LTS/include" -v28 -ml –float_support=fpu32 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_EXEC_PROFILER_ON -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DRT -DUSE_RTMODEL -DERT -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=4 -DMW_F2806X -DSTACK_SIZE=1024 -DF28069M -DCPU1 -DBOOT_FROM_FLASH=1 -DMW_FAST_RTS_INCLUDED=0 -DMW_HCCAL_INCLUDED=0 -DMODEL=model -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/test -IC:/test/model_ert_rtw -IC:/PROGRA~1/MATLAB/R2024a/extern/include -IC:/PROGRA~1/MATLAB/R2024a/simulink/include -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2024a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/src -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_shared/inc -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~1/include -IC:/ti/CONTRO~1/DEVICE~1/f2806x/v151/F2806X~4/include -IC:/ti/CONTRO~1/libs/math/CLAmath/v400/include -IC:/ti/CONTRO~1/libs/math/IQmath/v160/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/shared/can/src/scanutil -IC:/ti/CONTRO~1/libs/UTILIT~1/HRCAP_~1/type0/v110/include -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/src/ipclite -IC:/PROGRA~1/MATLAB/R2024a/toolbox/c2b/tic2000_soc/inc/ipclite –output_file="eval_sigmoidnet.obj" "C:/PROGRA~1/MATLAB/R2024a/toolbox/ident/idutils/src/eval_sigmoidnet.c"
"C:/PROGRA~1/MATLAB/R2024a/simulink/include/simstruc.h", line 4554: warning: unrecognized #pragma
"C:/PROGRA~1/MATLAB/R2024a/rtw/c/src/cg_sfun.h", line 33: error: identifier "mdlInitializeSizes" is undefined
1 error detected in the compilation of "C:/Program Files/MATLAB/R2024a/toolbox/ident/idutils/src/sfunsigmoidnet.c".

>> Compilation failure
gmake: *** [sfunsigmoidnet.obj] Error 1
gmake: *** Waiting for unfinished jobs….
"C:/PROGRA~1/MATLAB/R2024a/simulink/include/simstruc.h", line 4554: warning: unrecognized #pragma

C:testmodel_ert_rtwinstrumented>echo The make command returned an error of 2
The make command returned an error of 2

C:testmodel_ert_rtwinstrumented>exit /B 1
### Build procedure for model aborted due to an error.
0 of 1 models built (1 models already up to date)
Build duration: 0h 0m 36.565s
Error:Error(s) encountered while building "model"PD: I can run the examples for the C2000 processor, but i cannot deploy a NLARX model thay estimated using the System Identification Toolbox
=== Subsystem Build (Elapsed: 49 sec) ===
The model pil is configured to simulate flush-to-zero (FTZ) behavior, but is using normal mode simulation. To observe FTZ behavior, simulate the model using an accelerated mode.
### Starting build procedure for: model
### Generating code and artifacts to ‘Model specific’ folder structure
### Generating code into build folder: C:testmodel_ert_rtw
The model model is configured to simulate flush-to-zero (FTZ) behavior, but is using normal mode simulation. To observe FTZ behavior, simulate the model using an accelerated mode.
### Invoking Target Language Compiler on model.rtw
### Using System Target File: C:Program FilesMATLABR2024artwcertert.tlc
### Loading TLC function libraries
……..
### Generating TLC interface API for custom data
### Initial pass through model to cache user defined code
….
### Caching model source code
…………………………………………………………………….
……….
### Writing header file model_types.h
.
### Writing header file model.h
### Writing header file rtwtypes.h
### Writing source file model.c
### Writing header file model_private.h
### Writing header file rt_nonfinite.h
.
### Writing source file rt_nonfinite.c
### Writing header file rtGetInf.h
### Writing source file rtGetInf.c
### Writing header file rtGetNaN.h
### Writing source file rtGetNaN.c
.
### Writing source file model_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete (took 8.418s).
### Saving binary information cache.
### Using toolchain: Texas Instruments Code Composer Studio (C2000)
### Creating ‘C:testmodel_ert_rtwinstrumentedmodel.mk’ …
### Building ‘model’: "C:PROGRA~1MATLABR2024abinwin64gmake" DEPRULES=1 -j7 -f model.mk buildobj
..
C:testmodel_ert_rtwinstrumented>cd .

C:testmodel_ert_rtwinstrumented>chcp 1252
Pßgina de c¾digos activa: 1252

C:testmodel_ert_rtwinstrumented>echo The make command returned an error of 2
The make command returned an error of 2

C:testmodel_ert_rtwinstrumented>exit /B 1
### Build procedure for model aborted due to an error.
0 of 1 models built (1 models already up to date)
Build duration: 0h 0m 36.565s
Error:Error(s) encountered while building "model" PD: I can run the examples for the C2000 processor, but i cannot deploy a NLARX model thay estimated using the System Identification Toolbox
=== Subsystem Build (Elapsed: 49 sec) ===
The model pil is configured to simulate flush-to-zero (FTZ) behavior, but is using normal mode simulation. To observe FTZ behavior, simulate the model using an accelerated mode.
### Starting build procedure for: model
### Generating code and artifacts to ‘Model specific’ folder structure
### Generating code into build folder: C:testmodel_ert_rtw
The model model is configured to simulate flush-to-zero (FTZ) behavior, but is using normal mode simulation. To observe FTZ behavior, simulate the model using an accelerated mode.
### Invoking Target Language Compiler on model.rtw
### Using System Target File: C:Program FilesMATLABR2024artwcertert.tlc
### Loading TLC function libraries
……..
### Generating TLC interface API for custom data
### Initial pass through model to cache user defined code
….
### Caching model source code
…………………………………………………………………….
……….
### Writing header file model_types.h
.
### Writing header file model.h
### Writing header file rtwtypes.h
### Writing source file model.c
### Writing header file model_private.h
### Writing header file rt_nonfinite.h
.
### Writing source file rt_nonfinite.c
### Writing header file rtGetInf.h
### Writing source file rtGetInf.c
### Writing header file rtGetNaN.h
### Writing source file rtGetNaN.c
.
### Writing source file model_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete (took 8.418s).
### Saving binary information cache.
### Using toolchain: Texas Instruments Code Composer Studio (C2000)
### Creating ‘C:testmodel_ert_rtwinstrumentedmodel.mk’ …
### Building ‘model’: "C:PROGRA~1MATLABR2024abinwin64gmake" DEPRULES=1 -j7 -f model.mk buildobj
..
C:testmodel_ert_rtwinstrumented>cd .

C:testmodel_ert_rtwinstrumented>chcp 1252
Pßgina de c¾digos activa: 1252

C:testmodel_ert_rtwinstrumented>echo The make command returned an error of 2
The make command returned an error of 2

C:testmodel_ert_rtwinstrumented>exit /B 1
### Build procedure for model aborted due to an error.
0 of 1 models built (1 models already up to date)
Build duration: 0h 0m 36.565s
Error:Error(s) encountered while building "model" pil, matlab, simulink, simulation, hardware, code generation, embedded coder MATLAB Answers — New Questions

Can I delete Internet Folder (x86) and Internet folders from W11?

/ 2024-08-14 / Microsoft

IT Security department requested to delete the folders from all workstations. I can’t find any articles about this subject. Many thanks in advance if you can point me in the right direction.

IT Security department referred to the below article

Windows 11 is deleting Internet Explorer – The Verge

They want the folders removed from the C drive. I told them it wasn’t possible

C:Program FilesInternet Explorer

C:Program Files (x86)Internet Explorer

IT Security department requested to delete the folders from all workstations. I can’t find any articles about this subject. Many thanks in advance if you can point me in the right direction.IT Security department referred to the below articleWindows 11 is deleting Internet Explorer – The Verge They want the folders removed from the C drive. I told them it wasn’t possible C:Program FilesInternet ExplorerC:Program Files (x86)Internet Explorer Read More

Help with adding Windows 10 over Windows 7 please.

/ 2024-08-14 / Microsoft

I am not tech savy. I can’t figure out how to load windows 10 on my computer. Right now I have a windows 7. Any help would be greatly appreciated.

I am not tech savy. I can’t figure out how to load windows 10 on my computer. Right now I have a windows 7. Any help would be greatly appreciated. Read More

Is it safe to delete the node-specific folders under ~/.MathWorks/ServiceHost/ on Linux?

/ 2024-08-14 / Matlab

I am using MATLAB R2024 on a Linux environment, and I noticed that folders are being created under the path ~/.MathWorks/ServiceHost/, one for each node I run, and each folder is consuming a significant amount of disk space. Is it safe to delete these folders? If not, is there a way to reduce the disk space usage?I am using MATLAB R2024 on a Linux environment, and I noticed that folders are being created under the path ~/.MathWorks/ServiceHost/, one for each node I run, and each folder is consuming a significant amount of disk space. Is it safe to delete these folders? If not, is there a way to reduce the disk space usage? I am using MATLAB R2024 on a Linux environment, and I noticed that folders are being created under the path ~/.MathWorks/ServiceHost/, one for each node I run, and each folder is consuming a significant amount of disk space. Is it safe to delete these folders? If not, is there a way to reduce the disk space usage? servicehost MATLAB Answers — New Questions

Provided Authorization Code is intended to use against other tenant, thus rejected using Auth.js

/ 2024-08-14 / Microsoft

I am trying to using Auth,js v5 to login with microsoft from any organisation. I ahve been troublshooting this for so long and I have tried this with supabase auth to test. It worked frist try logging in with an organisation account, but I don’t want to use supabase, I want to use Auth.js. I am getting “AADSTS700005: Provided Authorization Code is intended to use against other tenant, thus rejected.“. I have multitenant enabled in the azure portal and I cannot find anyone with the same issue as me.

I am trying to using Auth,js v5 to login with microsoft from any organisation. I ahve been troublshooting this for so long and I have tried this with supabase auth to test. It worked frist try logging in with an organisation account, but I don’t want to use supabase, I want to use Auth.js. I am getting “AADSTS700005: Provided Authorization Code is intended to use against other tenant, thus rejected.”. I have multitenant enabled in the azure portal and I cannot find anyone with the same issue as me. Read More

Configuring Windows 10 via GPO

/ 2024-08-14 / Microsoft

Hello

I’d like to configure my Windows 10 to have zero unannounced installations. That is it must ask user or admin, first, regardless of what it’s installing.

Secondly I’d like to set the internet traffic in / out to zero bytes unless either initiated by user or admin or approved by user / admin.

I’ve spent a few days looking at individual policies and got pretty close but I’ve had to reinstall now cause Microsoft Security would not load at all after setting the previous set of rules.

If posted in wrong thread, please advise. Thank you for reading my help request

Hello I’d like to configure my Windows 10 to have zero unannounced installations. That is it must ask user or admin, first, regardless of what it’s installing. Secondly I’d like to set the internet traffic in / out to zero bytes unless either initiated by user or admin or approved by user / admin. I’ve spent a few days looking at individual policies and got pretty close but I’ve had to reinstall now cause Microsoft Security would not load at all after setting the previous set of rules. If posted in wrong thread, please advise. Thank you for reading my help request Read More

Industry Priority Scenarios – where are they??

/ 2024-08-14 / Microsoft

Hi All,

I’m searching for a list of all the Industry Priority Scenarios as the only one I can find online or in the portal is for retail. Does anybody by chance know where I can find a list of them?

Thank you!

Hi All,I’m searching for a list of all the Industry Priority Scenarios as the only one I can find online or in the portal is for retail. Does anybody by chance know where I can find a list of them?Thank you! Read More

Combide data using the command readcell

/ 2024-08-14 / Matlab

Hi, I have discovered that I have some issues when combining the output data that were saved in a text file. I tried to use readmatrix but some data are lost.
For example, I have attached three text files that contains cell data with columns x row. The number of columns have a constant value of 70, and the number of rows it may vary from each file. When I have created a foor loop to read all the data and combine them in a global matrix, I realized that some files files are read as cell arrays and they are not separated like others and creates an issue when combining them. I was trying to spit the files and create some conditions for those cases but some data is loose and the number of columns are lost and creates an issue when I want to combine the data in a global matrix. I would appreciate the help.Hi, I have discovered that I have some issues when combining the output data that were saved in a text file. I tried to use readmatrix but some data are lost.
For example, I have attached three text files that contains cell data with columns x row. The number of columns have a constant value of 70, and the number of rows it may vary from each file. When I have created a foor loop to read all the data and combine them in a global matrix, I realized that some files files are read as cell arrays and they are not separated like others and creates an issue when combining them. I was trying to spit the files and create some conditions for those cases but some data is loose and the number of columns are lost and creates an issue when I want to combine the data in a global matrix. I would appreciate the help. Hi, I have discovered that I have some issues when combining the output data that were saved in a text file. I tried to use readmatrix but some data are lost.
For example, I have attached three text files that contains cell data with columns x row. The number of columns have a constant value of 70, and the number of rows it may vary from each file. When I have created a foor loop to read all the data and combine them in a global matrix, I realized that some files files are read as cell arrays and they are not separated like others and creates an issue when combining them. I was trying to spit the files and create some conditions for those cases but some data is loose and the number of columns are lost and creates an issue when I want to combine the data in a global matrix. I would appreciate the help. issues when combining data as text files MATLAB Answers — New Questions

Vertcat tables with structure variables with different fieldnames

/ 2024-08-14 / Matlab

Hello! I’m having troubles when creating a table within a loop because some table variables are structure arrays that have different fieldnames. I get the following error :
Error using vertcat : Names of fields in structure arrays being concatenated do not match. Concatenation of structure arrays requires that these arrays have the same set of fields.
Example of my code :
%Inputs
ExampleTable = table();
Orig_1 = struct(‘m4ADG’,’folder_1′,’Group’,’folder_group’);
Orig_2 = struct(‘m5B0′,’folder_2′,’Group’,’folder_group’);
item = {‘charArray’,[1 1 1], Orig_1; ‘otherChar’,[1 2 1], Orig_2};
%function
VarNames = {‘Var1′,’Var2′,’Var3’};
for j = 1:size(item,1)
Var{1,1} = item{j,1};
Var{1,2} = item{j,2};
Var{1,3} = item{j,3};

NewTable = cell2table(Var);
NewTable.Properties.VariableNames = VarNames;

if isempty(ExampleTable)
ExampleTable = NewTable;
else
tmp = table2cell(NewTable);
ExampleTable = [ExampleTable; tmp];
end
clear NewTable Var
end

This whole thing runs within a class with the defined property ExampleTable as table and item, Orig_1|2 comes from elsewhere. Do you know how I can fix the problem?Hello! I’m having troubles when creating a table within a loop because some table variables are structure arrays that have different fieldnames. I get the following error :
Error using vertcat : Names of fields in structure arrays being concatenated do not match. Concatenation of structure arrays requires that these arrays have the same set of fields.
Example of my code :
%Inputs
ExampleTable = table();
Orig_1 = struct(‘m4ADG’,’folder_1′,’Group’,’folder_group’);
Orig_2 = struct(‘m5B0′,’folder_2′,’Group’,’folder_group’);
item = {‘charArray’,[1 1 1], Orig_1; ‘otherChar’,[1 2 1], Orig_2};
%function
VarNames = {‘Var1′,’Var2′,’Var3’};
for j = 1:size(item,1)
Var{1,1} = item{j,1};
Var{1,2} = item{j,2};
Var{1,3} = item{j,3};

NewTable = cell2table(Var);
NewTable.Properties.VariableNames = VarNames;

if isempty(ExampleTable)
ExampleTable = NewTable;
else
tmp = table2cell(NewTable);
ExampleTable = [ExampleTable; tmp];
end
clear NewTable Var
end

This whole thing runs within a class with the defined property ExampleTable as table and item, Orig_1|2 comes from elsewhere. Do you know how I can fix the problem? Hello! I’m having troubles when creating a table within a loop because some table variables are structure arrays that have different fieldnames. I get the following error :
Error using vertcat : Names of fields in structure arrays being concatenated do not match. Concatenation of structure arrays requires that these arrays have the same set of fields.
Example of my code :
%Inputs
ExampleTable = table();
Orig_1 = struct(‘m4ADG’,’folder_1′,’Group’,’folder_group’);
Orig_2 = struct(‘m5B0′,’folder_2′,’Group’,’folder_group’);
item = {‘charArray’,[1 1 1], Orig_1; ‘otherChar’,[1 2 1], Orig_2};
%function
VarNames = {‘Var1′,’Var2′,’Var3’};
for j = 1:size(item,1)
Var{1,1} = item{j,1};
Var{1,2} = item{j,2};
Var{1,3} = item{j,3};

NewTable = cell2table(Var);
NewTable.Properties.VariableNames = VarNames;

if isempty(ExampleTable)
ExampleTable = NewTable;
else
tmp = table2cell(NewTable);
ExampleTable = [ExampleTable; tmp];
end
clear NewTable Var
end

This whole thing runs within a class with the defined property ExampleTable as table and item, Orig_1|2 comes from elsewhere. Do you know how I can fix the problem? table, structures MATLAB Answers — New Questions

Partners, join us for an exclusive Copilot for Microsoft 365 prompt-a-thon! 🚀

/ 2024-08-14 / Microsoft

Learn effective prompting techniques and maximize your use of Copilot for Microsoft 365 in this instructor-led virtual event. Gain skills in utilizing generative AI and discover easy ways to kickstart your Copilot journey. No license required!

Event Highlights:
:rocket: Boost Productivity: Streamline tasks, catch up post-time off, and enhance email writing with clever prompts!
Learn Best Practices: Explore how Microsoft integrates Copilot into daily operations
Interactive Q&A: Engage with our AI and prompting experts

Action required!
Date: Thursday, August 15, 2024
Time: 8:00 – 9:00 AM (GMT-07:00)
Register now: https://lnkd.in/dTtYp7ud

Learn effective prompting techniques and maximize your use of Copilot for Microsoft 365 in this instructor-led virtual event. Gain skills in utilizing generative AI and discover easy ways to kickstart your Copilot journey. No license required!Event Highlights::rocket: Boost Productivity: Streamline tasks, catch up post-time off, and enhance email writing with clever prompts!Learn Best Practices: Explore how Microsoft integrates Copilot into daily operationsInteractive Q&A: Engage with our AI and prompting expertsAction required! Date: Thursday, August 15, 2024Time: 8:00 – 9:00 AM (GMT-07:00)Register now: https://lnkd.in/dTtYp7ud Read More

Microsoft

Get tailored insights with our Advisor Well-Architected assessments

/ 2024-08-14

For cloud applications and mission-critical workloads, organizations trust Azure to drive innovation, scale operations, and keep their business competitive. As cloud environments grow more complex, however, companies strive to build secure and reliable cloud infrastructures while maintaining cost-efficiency—but achieving this balance can be daunting. We understand how important it is for our customers to implement better applications through curated guidance based on the needs and demands of their organizations, which is why we’re thrilled to announce Advisor Well-Architected assessment in Azure, now in public preview.

Advisor Well-Architected assessments are self-guided questionnaires that provide tailored, actionable recommendations to optimize Azure resources and align with Azure Well-Architected Framework (WAF) principles. The assessments contribute to enhancing system performance, resiliency, security and cost -efficiency while ensuring operational excellence to maximize the returns from cloud infrastructure. And when complemented by the FinOps framework—a set of best practices for optimizing cloud costs, enhancing operational efficiency, and driving business value—your organization can proactively identify cost-saving opportunities, avoid overspending, and ensure that your cloud solutions are both technically sound and financially sustainable.

In this blog we’ll introduce you to the benefits of the Advisor Well-Architected assessment capability and show how assessments can help you achieve optimal infrastructure performance. 

What are the business benefits of Advisor Well-Architected assessments? 

Advisor Well-Architected assessment provides curated guidance after a comprehensive review of your cloud environments based on your organizational goals. The recommendations produced by this assessment not only help address potential issues before they become critical but also help you design systems to ensure maximum resiliency and availability to support business-critical workloads.

Here are some key benefits: 

Holistic view: The assessments provide a comprehensive view of the workload’s architecture, allowing customers to improve various aspects such as resiliency and performance efficiency. 

Tailored recommendations: Customers receive tailored recommendations based on the Azure Well-Architected Framework to enhance their workloads. These recommendations are actionable and come with supporting links to assist in implementation. 

Continuous improvement: The assessments are designed to be part of a continuous improvement cycle, helping customers to regularly update and optimize their workloads. 

Integration with operational processes: Recommendations can be exported and integrated into the customer’s operational processes, aligning with the workload’s software development lifecycle (SDLC) for ongoing improvements. 

Prioritization of tasks: The assessment helps workload owners and stakeholders to prioritize tasks based on the assessment’s findings, ensuring that the most critical improvements are addressed first. 

Decision tradeoffs: The trade-offs within the Azure Well-Architected Framework represent a strategic benefit, as they encourage a comprehensive approach to designing and managing cloud workloads. By understanding and balancing the interplay between the five pillars, customers are equipped to make informed decisions that align with business objectives.  

The assessment experience is your companion in the journey towards excellence in cloud workload optimization. The recommendations help reduce unplanned outages, avoid bloated bills, maintain compliance with industry regulations, detect vulnerabilities, boost performance, and ensure operational excellence, thus optimizing your cloud infrastructure. That makes assessing your workloads not a luxury but essential due diligence to ensure an optimized cloud infrastructure. 

What is Azure Well-Architected Framework and how does it interconnect with FinOps?

The Azure Well-Architected Framework (WAF) is a design framework that can improve the quality of a workload and spans five pillars of:  

Reliability: Design systems to recover from failures and meet availability targets. 

Security: Protect applications and data from threats with a layered defense approach. 

Cost Optimization: Maximize business value by balancing cost and performance. 

Operational Excellence: Run and monitor systems to deliver business value and continually improve processes. 

Performance Efficiency: Design systems to scale and adapt to changing requirements while maintaining efficiency. 

FinOps is a cultural practice and operational framework that brings together technology, finance, and business teams to drive financial accountability and maximize the value of your cloud investments. The FinOps framework and WAF complement each other by aligning financial management and operational excellence in cloud environments.

The FinOps Framework focuses on understanding, optimizing, and managing cloud costs, while WAF provides best practices for building and maintaining efficient, reliable, and cost-effective applications on Azure. Together, they ensure that organizations can achieve financial accountability and technical excellence in their cloud infrastructure.

FinOps comprises four key domains:

Understand Cloud Usage & Cost: Gather and categorize cloud cost and usage data for comprehensive understanding.

Quantify Business Value: Connect cloud usage and cost data to the business value it generates.

Optimize Cloud Usage & Cost: Ensure efficient cloud resource usage and cost-effectiveness.

Manage the FinOps Practice: Enable continuous improvement in FinOps adoption and organizational alignment.

The “Optimize Cloud Usage & Cost” domain is particularly crucial for the purposes of the Advisor Well-Architected assessment, as it focuses on ensuring efficient use of cloud resources and cost-effectiveness. This aligns with the WAF’s cost optimization pillar, which emphasizes designing cloud solutions that maximize value while minimizing expenses. Both frameworks advocate continuous monitoring and adjustments to achieve optimal financial and operational efficiency. 

How do I use Advisor Well-Architected assessments? 

Running a WAF assessment on Azure Advisor is a simple, straightforward process.

3. Select the subscription, workload (optional attribute), assessment type and enter a name for the assessment. Select Next.

4. Select Create in the Review + Create step. This will redirect you to the MS Learn platform where you can complete the assessment. Refer Use Well-Architected Framework assessments in Azure Advisor for a detailed step by step guide.

View and manage recommendations:

Navigate to Advisor -> Assessments
Select the assessment name with a completed status from the list for which you would want to view the recommendations
The list of recommendations will be visible for users to view and act on.    

Take the next step: Start your WAF assessment today 

Azure Advisor’s Well-Architected Assessment is a powerful tool to elevate your Azure environment for performance, reliability, security, cost, and operations while maintaining alignment with FinOps principles of accountability and cost effectiveness. By proactively identifying and addressing areas for improvement, you ensure your cloud infrastructure is refined to drive your business forward into the future. 

Learn More:

Introduction to Azure Advisor

Azure Advisor – Azure Best Practices | Microsoft Azure

Get started with Azure Advisor – Training | Microsoft Learn

Microsoft Tech Community – Latest Blogs –Read More

trying to follow the convert-to-spiking example. load(“DigitsDataTrain”) does not work. I can’t find a DOWNLOAD for this .mat file either. John

/ 2024-08-14 / Matlab

I’m trying to follow the convert-to-spiking NN example.
https://www.mathworks.com/help/deeplearning/ug/convert-to-spiking-neural-network.html
>> load("DigitsDataTrain")
Error using load
Unable to find file or directory ‘DigitsDataTrain’.
*** There is nowhere to download this .mat file that I can find. Thanks, JohnI’m trying to follow the convert-to-spiking NN example.
https://www.mathworks.com/help/deeplearning/ug/convert-to-spiking-neural-network.html
>> load("DigitsDataTrain")
Error using load
Unable to find file or directory ‘DigitsDataTrain’.
*** There is nowhere to download this .mat file that I can find. Thanks, John I’m trying to follow the convert-to-spiking NN example.
https://www.mathworks.com/help/deeplearning/ug/convert-to-spiking-neural-network.html
>> load("DigitsDataTrain")
Error using load
Unable to find file or directory ‘DigitsDataTrain’.
*** There is nowhere to download this .mat file that I can find. Thanks, John digitsdatatest.mat MATLAB Answers — New Questions

Microsoft

Random window scaling / DPI issues when running GE Viewpoint as a published app in AVD

/ 2024-08-14

Within the application when I click on a sub menu (the problems happens throughout the application not only in this one area) for example as shown below:

The resulting popup window sometimes does not render correctly as shown below, it gets chopped off and when you hover over the edge of the pop up it is as if it is in a different place.

If you do find the edge and resize it, the window does render as expected and you can then move on (shown below). The issue appears to be random but happens for multiple clients, laptops and desktops, docked and not docked. We have also tried multiple versions of the AVD desktop client including the beta version available in the Windows Store.

Appreciate any help.

This issue mostly if not exclusively occur when running the desktop client of AVD. The web version seems to work much better, but we need the desktop client for resolution and multiple screen support reasons. Within the application when I click on a sub menu (the problems happens throughout the application not only in this one area) for example as shown below: The resulting popup window sometimes does not render correctly as shown below, it gets chopped off and when you hover over the edge of the pop up it is as if it is in a different place. If you do find the edge and resize it, the window does render as expected and you can then move on (shown below). The issue appears to be random but happens for multiple clients, laptops and desktops, docked and not docked. We have also tried multiple versions of the AVD desktop client including the beta version available in the Windows Store. Appreciate any help. Read More

Microsoft

Microsoft Project Professional custom fields error before publishing

/ 2024-08-14

I am experiencing strange behavior in Ms Project Professional. It is related to certain custom task fields. When I open a project, the fields show #ERROR (error). After making a minor change to the project, such as displaying an additional field and publishing, the error disappears. This behavior would not be a problem if, after publishing the first time, the error disappeared permanently. Unfortunately, the error persists. That is, I close the file, open it again and again the fields show an error, which only disappears (temporarily) after making a small change and publishing but reappears every time the file is opened. I tend to think it’s related to a formulation that depends on two other columns with rollup. Due to the calculations I have to do I can’t find an alternative solution. Has anyone seen this behavior before? Do you have a good explanation? any alternative solution?

Join us next week! Accelerate Your AI GTM Journey with Microsoft: From Concept to Realization

/ 2024-08-14 / Microsoft

Interested to learn about best practices for bringing your AI solutions to market with Microsoft?

Join us for a transformative journey through the realm of building an AI business and Go-to-Market with Microsoft, starting next week (August 19-22). In this four-part series design for Microsoft ISV partners, we will:

· Explore the Business Value of AI and how to Prioritize Use Cases for maximum impact.

· Learn from AI Pioneers about navigating business transformation and the principles that drive success.

· Discover Best Practices for Bringing AI Solutions to Market, including buyer behavior and effective positioning.

· And finally, Design Your Blueprint for Business Impact & Innovation with AI, a session dedicated to integrating AI into your business strategy for robust transformation and growth.

This series promises to empower product, marketing and sales leaders and practitioners with

insights for leveraging AI for competitive advantage and customer satisfaction as you build and execute your Go-to-Market with Microsoft.

Virtual Business Track Session Overview

The Business Value of AI, August 19, 10AM PT

Discover how Microsoft’s Customer Business Outcomes team simplifies the assessment and prioritization of your AI use cases, equipping you with a framework to optimize investments and forge valuable connections for navigating this evolving landscape.

Navigating Business Transformation: Learn from AI Pioneers, August 20, 10AM PT

Calling all innovators to join us in this session to explore the real-world opportunities and challenges surrounding AI-led product transformation, and gain valuable insights, principles, and decision frameworks to successfully navigate this era of business evolution.

Best Practices for Bringing AI Solutions to Market, August 21, 10AM PT

Learn critical steps and best practices to reduce risk and increase success of bringing new AI solutions to market; and understand emotional positioning, pricing models and how to leverage Marketplace for sales.

Design Your Blueprint for Business Impact & Innovation with AI, August 22, 10 AM PT

Join us in this session to learn essential steps to integrate AI into your strategy, empowering you to accelerate growth and capitalize on its potential.

Interested to learn about best practices for bringing your AI solutions to market with Microsoft?

Join us for a transformative journey through the realm of building an AI business and Go-to-Market with Microsoft, starting next week (August 19-22). In this four-part series design for Microsoft ISV partners, we will:
·     Explore the Business Value of AI and how to Prioritize Use Cases for maximum impact.
·     Learn from AI Pioneers about navigating business transformation and the principles that drive success.
·     Discover Best Practices for Bringing AI Solutions to Market, including buyer behavior and effective positioning.
·     And finally, Design Your Blueprint for Business Impact & Innovation with AI, a session dedicated to integrating AI into your business strategy for robust transformation and growth.

This series promises to empower product, marketing and sales leaders and practitioners with
insights for leveraging AI for competitive advantage and customer satisfaction as you build and execute your Go-to-Market with Microsoft.

Virtual Business Track Session Overview

The Business Value of AI, August 19, 10AM PT

Navigating Business Transformation: Learn from AI Pioneers, August 20, 10AM PT

Best Practices for Bringing AI Solutions to Market, August 21, 10AM PT

Design Your Blueprint for Business Impact & Innovation with AI, August 22, 10 AM PT

Join us in this session to learn essential steps to integrate AI into your strategy, empowering you to accelerate growth and capitalize on its potential.

Start-AzAutomationRunbook : Invalid runbook parameters.

/ 2024-08-14 / Microsoft

Hi Team,

My PowerShell Script trying to run a Runbook job using Runbook Hybrid worker group gives this error:

Start-AzAutomationRunbook : Invalid runbook parameters.

This happens when I am trying to pass parameter such as website name. Any help will be great.

Clear-AzContext -Force
Import-Module Az.Accounts
Import-Module Az.Automation

$Secret = “”
$AppId = “”
$TenantID = “”
$SecurePass = ConvertTo-SecureString $Secret -AsPlainText -Force

$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $AppId, $SecurePass
Connect-AzAccount -ServicePrincipal -Tenant $TenantID -Credential $Credential
#$IIS = “bill36”
#$Redi = “https://www.google.com”
$parameters= [ordered]@{‘SiteName’ = ‘bill36’ ; Redirect = ‘https://www.google.com’}

$resourceGroupName = “OnPrem-Automation”
$automationAccountName = “AzOnPrem-Automation”
$runbookName1 = “US03wredirect-IIS”
$hybridWorkerGroupName1 = “OnPrem-Automation”

$runbookName2 = “US01WREDIRECT111-IIS-OnPrem-Automation1”
$hybridWorkerGroupName2 = “OnPrem-Automation1”

$job1 = Start-AzAutomationRunbook -ResourceGroupName $resourceGroupName -AutomationAccountName $automationAccountName -Name $runbookName1 -Parameters $parameters -RunOn $hybridWorkerGroupName1 -debug
#$job2 = Start-AzAutomationRunbook -ResourceGroupName $resourceGroupName -AutomationAccountName $automationAccountName -Name $runbookName2 -Parameters $params2 -RunOn $hybridWorkerGroupName2

Hi Team,My PowerShell Script trying to run a Runbook job using Runbook Hybrid worker group gives this error:Start-AzAutomationRunbook : Invalid runbook parameters. This happens when I am trying to pass parameter such as website name. Any help will be great. Clear-AzContext -Force
Import-Module Az.Accounts
Import-Module Az.Automation

$Secret = “”
$AppId = “”
$TenantID = “”
$SecurePass = ConvertTo-SecureString $Secret -AsPlainText -Force

$resourceGroupName = “OnPrem-Automation”
$automationAccountName = “AzOnPrem-Automation”
$runbookName1 = “US03wredirect-IIS”
$hybridWorkerGroupName1 = “OnPrem-Automation”

$runbookName2 = “US01WREDIRECT111-IIS-OnPrem-Automation1”
$hybridWorkerGroupName2 = “OnPrem-Automation1”

images from radio telescopes using matlab, simulink, and sdr

/ 2024-08-14 / Matlab

hello i would like to ask how to generate images from radio telescopes using matlab, simulink, and sdr. thanks very much.hello i would like to ask how to generate images from radio telescopes using matlab, simulink, and sdr. thanks very much. hello i would like to ask how to generate images from radio telescopes using matlab, simulink, and sdr. thanks very much. images, radio telescopes MATLAB Answers — New Questions

error in the code

/ 2024-08-14 / Matlab

erroe in string(j,n)=string(k,n);

for k=1:Npop
for j=1:dim
busLocation(j,k)=busd(busLocation(j,k),1);
end
sdf= unique(busLocation(:,k));

while length(sdf)<dim
sdf=randi([2 length(busd(:,1))],dim,1);
for j=1:dim
sdf(j)=busd(sdf(j),1);
end
busLocation(:,k)=sdf;

sdf= unique(busLocation(:,k));
end
end
ndif = [0.28; 0.35; 0.39; 0.35; 0.27; 0.34; 0.40; 0.34; 0.25; 0.32];
for k = 1:Npop
mdif(k)= ndif(k);
end
nsw=length(string);
mpop = round(Npop/4);
for j = 1:mpop
minman = min(mdif(:));
for k = 1:Npop
if mdif(k)== minman
for n=1:nsw
string(j,n)=string(k,n);
end
mdif(k)= 1010;
break;
end
end
end
for j = 1:(Npop-mpop)
for bits=1:nsw
string(mpop +j,bits) = string(j,bits);
end
end ; enderroe in string(j,n)=string(k,n);

for k=1:Npop
for j=1:dim
busLocation(j,k)=busd(busLocation(j,k),1);
end
sdf= unique(busLocation(:,k));

while length(sdf)<dim
sdf=randi([2 length(busd(:,1))],dim,1);
for j=1:dim
sdf(j)=busd(sdf(j),1);
end
busLocation(:,k)=sdf;

for k=1:Npop
for j=1:dim
busLocation(j,k)=busd(busLocation(j,k),1);
end
sdf= unique(busLocation(:,k));

while length(sdf)<dim
sdf=randi([2 length(busd(:,1))],dim,1);
for j=1:dim
sdf(j)=busd(sdf(j),1);
end
busLocation(:,k)=sdf;

Oral Dose Not Exhibiting Absorption/Bioavailability in Simulation

/ 2024-08-14 / Matlab

Hello! I am trying to use this model "Estimating the Bioavailibility of a Drug" that I found here, to do a simultaneous fitting of my IV infusion and P.O. blood concentration time profile. I implemented a two compartment model as well. For some reason, when I am running a simulation the oral dose exhibits a bioavailbility of >= 1, even though I have the parameter F set as 0.2. I attached images of my simulation curve (green is oral dose), model diagram, ODEs, and dosing setup. I’m thinking it might have something to do with the way I set up the dosing, but please let me know if you have any advice on how I should troubleshoot this. I am using R2024a. Please let me know if I should include anything else. Thanks!Hello! I am trying to use this model "Estimating the Bioavailibility of a Drug" that I found here, to do a simultaneous fitting of my IV infusion and P.O. blood concentration time profile. I implemented a two compartment model as well. For some reason, when I am running a simulation the oral dose exhibits a bioavailbility of >= 1, even though I have the parameter F set as 0.2. I attached images of my simulation curve (green is oral dose), model diagram, ODEs, and dosing setup. I’m thinking it might have something to do with the way I set up the dosing, but please let me know if you have any advice on how I should troubleshoot this. I am using R2024a. Please let me know if I should include anything else. Thanks! Hello! I am trying to use this model "Estimating the Bioavailibility of a Drug" that I found here, to do a simultaneous fitting of my IV infusion and P.O. blood concentration time profile. I implemented a two compartment model as well. For some reason, when I am running a simulation the oral dose exhibits a bioavailbility of >= 1, even though I have the parameter F set as 0.2. I attached images of my simulation curve (green is oral dose), model diagram, ODEs, and dosing setup. I’m thinking it might have something to do with the way I set up the dosing, but please let me know if you have any advice on how I should troubleshoot this. I am using R2024a. Please let me know if I should include anything else. Thanks! matlab, simbiology, simulation, oral dose, dosing, bioavailibility MATLAB Answers — New Questions

Simple Excel sum formula showing error

/ 2024-08-14 / Microsoft

I have been making changes on the linked sheet and verifying the column totals on the summary sheet after each change. I did not notice the error in the total column on the far right until it came onto the screen as I worked across. My formulas reference the range of columns from B to AT; for row 42, the formula looks like this: “=SUM(B42:AT42). The simple suggestion at MicroSoft Support that something in my cell reference was deleted or pasted over does not apply. Even if I had deleted a column, other than B or AT, it wouldn’t (shouldn’t) affect the formula.

As I said earlier, all my columns total down correctly and none is showing an error. The error is on every row, which seems odd. If I had done something anywhere, it seems it would affect not only the related row but also it should be affecting the related column. I’m sure I’ve done something to cause this, I just can’t figure out what. I continue to search.

One more thing I have other sections in this worksheet where rows are totaling across properly. If you have a suggestion share it with me.

Thanks for your time.

I have a simple Excel spreadsheet (summary) with multiple columns (approx. 48) summarizing nine rows of data linked from an adjoining sheet (upload). The columns total down with no problem. However, the rows totaling across are suddenly showing a #REF! error. I can see no such errors on my summary spreadsheet or on the sheet it is linked to. I have been making changes on the linked sheet and verifying the column totals on the summary sheet after each change. I did not notice the error in the total column on the far right until it came onto the screen as I worked across. My formulas reference the range of columns from B to AT; for row 42, the formula looks like this: “=SUM(B42:AT42). The simple suggestion at MicroSoft Support that something in my cell reference was deleted or pasted over does not apply. Even if I had deleted a column, other than B or AT, it wouldn’t (shouldn’t) affect the formula. As I said earlier, all my columns total down correctly and none is showing an error. The error is on every row, which seems odd. If I had done something anywhere, it seems it would affect not only the related row but also it should be affecting the related column. I’m sure I’ve done something to cause this, I just can’t figure out what. I continue to search. One more thing I have other sections in this worksheet where rows are totaling across properly. If you have a suggestion share it with me. Thanks for your time. Read More

Previous 1 … 447 448 449 450 451 … 724 Next

Cart

Cart

Category: News

Hi I am triying to run a Processor in the Loop simulation using a LaunchPad XL C2000 TMS320F28069M, however when I tried to deploy my model to hardware i got the next error:

Can I delete Internet Folder (x86) and Internet folders from W11?

Help with adding Windows 10 over Windows 7 please.

Is it safe to delete the node-specific folders under ~/.MathWorks/ServiceHost/ on Linux?

Provided Authorization Code is intended to use against other tenant, thus rejected using Auth.js

Configuring Windows 10 via GPO

Industry Priority Scenarios – where are they??

Combide data using the command readcell

Vertcat tables with structure variables with different fieldnames

Partners, join us for an exclusive Copilot for Microsoft 365 prompt-a-thon! 🚀

Get tailored insights with our Advisor Well-Architected assessments

trying to follow the convert-to-spiking example. load(“DigitsDataTrain”) does not work. I can’t find a DOWNLOAD for this .mat file either. John

Random window scaling / DPI issues when running GE Viewpoint as a published app in AVD

Microsoft Project Professional custom fields error before publishing

Join us next week! Accelerate Your AI GTM Journey with Microsoft: From Concept to Realization

Start-AzAutomationRunbook : Invalid runbook parameters.

images from radio telescopes using matlab, simulink, and sdr

error in the code

Oral Dose Not Exhibiting Absorption/Bioavailability in Simulation

Simple Excel sum formula showing error

Information

Contact Us

All Categories

Search

Cart

All Categories

Search

Cart

Sign Up For Newsletters

Information

Contact Us