Category: News
Azure free subscription
Hello everyone,
I’m new to the community and would greatly appreciate any assistance. Could any MCT help me generate a free Azure subscription code so I can practice and deploy the code I’ve written for learning? Your help would be greatly appreciated. Thank you!
Hello everyone, I’m new to the community and would greatly appreciate any assistance. Could any MCT help me generate a free Azure subscription code so I can practice and deploy the code I’ve written for learning? Your help would be greatly appreciated. Thank you! Read More
Need Help with Windows Sandbox Initialization Error (0x80070005)
Hi everyone,
I’m encountering an issue with Windows Sandbox on my system. When I try to start it, I get the following error message:
Windows Sandbox failed to initialize.
Error 0x80070005. Access is denied.
Would you like to submit feedback about this issue?
I’ve attached a screenshot of the error message for reference.
Has anyone faced a similar issue or does anyone have any suggestions on how to fix this? I’ve tried the following solutions so far without success:
Restarting the computerRunning Windows Update to ensure all patches are installedChecking Windows features to ensure Sandbox is enabled (tried also to reenable)
Any help or guidance would be greatly appreciated!
Thanks in advance!
Hi everyone,I’m encountering an issue with Windows Sandbox on my system. When I try to start it, I get the following error message:Windows Sandbox failed to initialize.Error 0x80070005. Access is denied.Would you like to submit feedback about this issue?I’ve attached a screenshot of the error message for reference. Has anyone faced a similar issue or does anyone have any suggestions on how to fix this? I’ve tried the following solutions so far without success:Restarting the computerRunning Windows Update to ensure all patches are installedChecking Windows features to ensure Sandbox is enabled (tried also to reenable)Any help or guidance would be greatly appreciated!Thanks in advance! Read More
Load external file in ssc block Simscape
I build a "liquid valve" component (.ssc file) in Simscape which includes a dropdown menu to select different valve types. The parameters for each valve are stored as a structure in a separated .m file. Depending on which valve is selected, I would like to "load" the corresponding values into my "liquid valve" component (.ssc file). Similar to the "Thermal Liquid Properties (TL)" component which loads an external file depending on the selected fluid.
How do I "load/import" my external .m file (structure) into my simscape component?I build a "liquid valve" component (.ssc file) in Simscape which includes a dropdown menu to select different valve types. The parameters for each valve are stored as a structure in a separated .m file. Depending on which valve is selected, I would like to "load" the corresponding values into my "liquid valve" component (.ssc file). Similar to the "Thermal Liquid Properties (TL)" component which loads an external file depending on the selected fluid.
How do I "load/import" my external .m file (structure) into my simscape component? I build a "liquid valve" component (.ssc file) in Simscape which includes a dropdown menu to select different valve types. The parameters for each valve are stored as a structure in a separated .m file. Depending on which valve is selected, I would like to "load" the corresponding values into my "liquid valve" component (.ssc file). Similar to the "Thermal Liquid Properties (TL)" component which loads an external file depending on the selected fluid.
How do I "load/import" my external .m file (structure) into my simscape component? simscape, structures MATLAB Answers — New Questions
Getting error Index exceesds the numbers of array elements. Index must not exceeds 4 getting this error when calling the function in Runfile. Secondly needs help to modified
Getting error Index exceesds the numbers of array elements. Index must not exceeds 4 getting this error when calling the function in Runfile. Secondly needs help to modified this app in where we give different values of RLC in one edit field and also the time interval innone edit field.Getting error Index exceesds the numbers of array elements. Index must not exceeds 4 getting this error when calling the function in Runfile. Secondly needs help to modified this app in where we give different values of RLC in one edit field and also the time interval innone edit field. Getting error Index exceesds the numbers of array elements. Index must not exceeds 4 getting this error when calling the function in Runfile. Secondly needs help to modified this app in where we give different values of RLC in one edit field and also the time interval innone edit field. matlab MATLAB Answers — New Questions
Sortby and Filter together – Circular Reference Error
I am trying to sort (using SORTBY) a filter array on two columns, one which is value derived from another of the columns in the range being filtered. I get an error saying that there’s a circular reference — which there is.
To be more specific: I have 3 columns, a word list, the date the word was added, and a column indicating (by 1 or 0) a “rating” for the word.
One of the sorting columns is the date column. It’s value is based on an XLOOKUP to a chart of words and the date they were added. Some words have blank dates (unknown). So the date column is derived from the word list column.
Filtering the list on the rating indicator works, but when I try to sort by the looked-up date column, I get the error.
Thanks to anyone who can say how to fix this problemand sort the filtered results by 2 columns.
I am trying to sort (using SORTBY) a filter array on two columns, one which is value derived from another of the columns in the range being filtered. I get an error saying that there’s a circular reference — which there is. To be more specific: I have 3 columns, a word list, the date the word was added, and a column indicating (by 1 or 0) a “rating” for the word. One of the sorting columns is the date column. It’s value is based on an XLOOKUP to a chart of words and the date they were added. Some words have blank dates (unknown). So the date column is derived from the word list column. Filtering the list on the rating indicator works, but when I try to sort by the looked-up date column, I get the error. Thanks to anyone who can say how to fix this problemand sort the filtered results by 2 columns. Read More
Use of AI in Azure DevOps
Hello Team,
Can anyone used AI in azure DevOps. Like AI can be used in Azure build and release pipelines.
Also it can be used in other service like VM creation, ARM templates.
Mostly if anyone used for Azure build and release pipelines. Please reply.
Hello Team, Can anyone used AI in azure DevOps. Like AI can be used in Azure build and release pipelines.Also it can be used in other service like VM creation, ARM templates. Mostly if anyone used for Azure build and release pipelines. Please reply. Read More
New Bookings Page – No Availability even though it is set
Days can be booked in the calendar but not from the bookings page – the availability of staff and the venue does not display correctly
Days can be booked in the calendar but not from the bookings page – the availability of staff and the venue does not display correctly Read More
How to limit the CoPilot scope in the tenant resources.
Good morning,
I looked around for similar topics without success, so please redirect me to any active thread if one exists.
We are in the process of implementing M365 CoPilot for a limited number of users as part of an adoption phase.
As for the users, we will progressively extend CoPilot’s visibility (see segregation) of the user tenant resources once validated by our team.To be clear, for example, CoPilot works across all of Graph, but initially, we would exclude SharePoint and focus only on Exchange.How can we achieve this? Is it possible?
Thanks, Fabrizio
Good morning,I looked around for similar topics without success, so please redirect me to any active thread if one exists.We are in the process of implementing M365 CoPilot for a limited number of users as part of an adoption phase. As for the users, we will progressively extend CoPilot’s visibility (see segregation) of the user tenant resources once validated by our team.To be clear, for example, CoPilot works across all of Graph, but initially, we would exclude SharePoint and focus only on Exchange.How can we achieve this? Is it possible? Thanks, Fabrizio Read More
Migrated Surface Hub 3 doesn’t log on
I have installed a Surface Hub 3 (updated with compute cartridge) using Autopilot and followed the guide to Teams auto-login (Deploy Surface Hub with Windows Autopilot & Teams Rooms Auto-login – Surface Hub | Microsoft Learn) but the device doesn’t (apparently) retrieve the user from the Teams Pro Management Portal and doesn’t auto-login.
I don’t have any Intune configuration that prevents local login (only Defender configuration).
Any suggestions on how to get auto-login working properly??
/Kenneth ML
I have installed a Surface Hub 3 (updated with compute cartridge) using Autopilot and followed the guide to Teams auto-login (Deploy Surface Hub with Windows Autopilot & Teams Rooms Auto-login – Surface Hub | Microsoft Learn) but the device doesn’t (apparently) retrieve the user from the Teams Pro Management Portal and doesn’t auto-login. I don’t have any Intune configuration that prevents local login (only Defender configuration). Any suggestions on how to get auto-login working properly??/Kenneth ML Read More
Importing and Exporting a List Template (.stp file) in SharePoint
Developers often need to import the same data for reuse across SharePoint sites. They want an effective way to import and manage this data across sites and want to preserve environment settings, rather than having to start from scratch each time.
As a developer, if you’re using the modern experience in SharePoint, the option to upload a SharePoint list template (.stp) file isn’t obvious in your settings. Also, if you try to upload it, you might get a message that says, “Sorry, you don’t have access.”
“Sorry, you don’t have access” message, when you upload a list template in the modern experience.
However, the option to upload a list template is easy to see and works well when you use the classic experience in the SharePoint admin center. In this technical article, you will learn how developers can handle data replication between sites by importing SharePoint lists using the classic experience.
Accessing the SharePoint Admin Center
To get started, sign in to the SharePoint admin center with your administrator credentials. The admin center gives you access to your environment’s settings and customizations.
Creating a Classic SharePoint Site
Once you’ve entered the SharePoint admin center, go to the Sites or Active sites area. To create a new SharePoint site, select Create or New. When choosing the site template, select the template that uses the classic experience because it provides the features required for list import.
Uploading Lists Across Sites
After setting up your classic SharePoint site, navigate to the site where you want to import the list. To access the site’s settings, go to the Web Designer Galleries category, choose Site Settings, and then choose List Templates.
Leveraging the Classic SharePoint Admin Center to Use Uploaded Lists
After you upload the file, go to the settings gear and select Add an app. Locate and choose the uploaded list template. To complete the import process, enter the necessary information for the new list, and then select Create or OK.
Summary
To reuse data and to preserve environment settings, developers frequently need to import SharePoint lists across other sites. To resolve the problem, use the SharePoint admin center’s classic experience.
Resources
For more information, see the following:
SharePoint documentation
SharePoint community
Microsoft Tech Community – Latest Blogs –Read More
Does the new MatLab update integrate features of Psychtoolbox, making it possibly unnecessary for psychology research?
I work in a visual attention lab, and we use Matlab to code lots of experiments that show many pictures with different timings, features, etc. However, our lab computers are all Mac OSs, so we’re concerned that Psychtoolbox will be essentially useless once we are required to update the OS by the institution. Are the new Matlab updates moving towards making it powerful enough to code these experiments without needing psychtoolbox?I work in a visual attention lab, and we use Matlab to code lots of experiments that show many pictures with different timings, features, etc. However, our lab computers are all Mac OSs, so we’re concerned that Psychtoolbox will be essentially useless once we are required to update the OS by the institution. Are the new Matlab updates moving towards making it powerful enough to code these experiments without needing psychtoolbox? I work in a visual attention lab, and we use Matlab to code lots of experiments that show many pictures with different timings, features, etc. However, our lab computers are all Mac OSs, so we’re concerned that Psychtoolbox will be essentially useless once we are required to update the OS by the institution. Are the new Matlab updates moving towards making it powerful enough to code these experiments without needing psychtoolbox? psychtoolbox, updates, matlab MATLAB Answers — New Questions
Simulink user interface slow
Greetings,
Using MATLAB/Simulink 2019b. The interface while modifying my model can get really slow and laggy. Even just simply clicking, dragging, and resizing. Scrolling the wheel to zoom in/zoom out, along with attaching connections.
Is there anything I can do to increase the performance. My laptop isn’t the newest, but it’s also not that old. I use 64b windows 10, 64b MATLAB. I’m at 10/16 GB of memory used with MATLAB taking 1.5GB and a constant 15-25% CPU.
I have two models open, and some MATLAB code. Really would appreciate any advice on increasing the general UI performance.
Edit: Restarted MATLAB. without a model open it idles with 0% CPU. When I open the model it "idles" at 10+% CPU. Just having the model open and not interacting with it.Greetings,
Using MATLAB/Simulink 2019b. The interface while modifying my model can get really slow and laggy. Even just simply clicking, dragging, and resizing. Scrolling the wheel to zoom in/zoom out, along with attaching connections.
Is there anything I can do to increase the performance. My laptop isn’t the newest, but it’s also not that old. I use 64b windows 10, 64b MATLAB. I’m at 10/16 GB of memory used with MATLAB taking 1.5GB and a constant 15-25% CPU.
I have two models open, and some MATLAB code. Really would appreciate any advice on increasing the general UI performance.
Edit: Restarted MATLAB. without a model open it idles with 0% CPU. When I open the model it "idles" at 10+% CPU. Just having the model open and not interacting with it. Greetings,
Using MATLAB/Simulink 2019b. The interface while modifying my model can get really slow and laggy. Even just simply clicking, dragging, and resizing. Scrolling the wheel to zoom in/zoom out, along with attaching connections.
Is there anything I can do to increase the performance. My laptop isn’t the newest, but it’s also not that old. I use 64b windows 10, 64b MATLAB. I’m at 10/16 GB of memory used with MATLAB taking 1.5GB and a constant 15-25% CPU.
I have two models open, and some MATLAB code. Really would appreciate any advice on increasing the general UI performance.
Edit: Restarted MATLAB. without a model open it idles with 0% CPU. When I open the model it "idles" at 10+% CPU. Just having the model open and not interacting with it. performance ui MATLAB Answers — New Questions
Export function is saving previous result of matlab live script
Export function is saving previous result of matlab live script, and saving it is loosing all the data when overwritten.
I have a matlab live script file, and export function is included in that, however it is not saving the current run data.
is there any way to export the only data of the current state of matlab live script?Export function is saving previous result of matlab live script, and saving it is loosing all the data when overwritten.
I have a matlab live script file, and export function is included in that, however it is not saving the current run data.
is there any way to export the only data of the current state of matlab live script? Export function is saving previous result of matlab live script, and saving it is loosing all the data when overwritten.
I have a matlab live script file, and export function is included in that, however it is not saving the current run data.
is there any way to export the only data of the current state of matlab live script? export, save MATLAB Answers — New Questions
Cert Based Auth no longer working on Android devices.
Curious as to how wide spread this is/will be. Windows and iOS is fine, only affecting android.
You can easily test this by revoking MFA sessions on a user who is using cert based auth on a android phone.
I’m not sure if there has been a update recently to Android Microsoft Office apps where it thinks the certs live inside the intune company portal and is not looking for certs in the phones cert store.
BYOD work profile Android 14 phones are being problematic, when a user changed their password and Azure revoked their sessions for a reauth, the issue started occurring.
I tested this on another user manually revoking their MFA sessions without changing their password same issue occurred. I also setup a brand new Android phone and had the same issue after enrolling it.
The issue is when the user opens outlook or teams and goes to sign in, it will pop up asking to use a cert on the device or a physical key. When selecting on the device the phone will freeze it will then eventually say “”company portal isn’t responding” with the options of wait or cancel. Opening chrome in the work profile and going to a office app site will popup asking for the cert and works fine. So the issue doesn’t appear to be the phone getting the cert, just the Office Apps are not accessing the Phones cert Store. I can confirm the Cert is inside the work profile as a browser or cert viewer app inside the workprofile can see it, auths work fine when using a browser in work profile, just not outlook or teams inside the work profile.
Curious as to how wide spread this is/will be. Windows and iOS is fine, only affecting android.You can easily test this by revoking MFA sessions on a user who is using cert based auth on a android phone.I’m not sure if there has been a update recently to Android Microsoft Office apps where it thinks the certs live inside the intune company portal and is not looking for certs in the phones cert store.BYOD work profile Android 14 phones are being problematic, when a user changed their password and Azure revoked their sessions for a reauth, the issue started occurring.I tested this on another user manually revoking their MFA sessions without changing their password same issue occurred. I also setup a brand new Android phone and had the same issue after enrolling it.The issue is when the user opens outlook or teams and goes to sign in, it will pop up asking to use a cert on the device or a physical key. When selecting on the device the phone will freeze it will then eventually say “”company portal isn’t responding” with the options of wait or cancel. Opening chrome in the work profile and going to a office app site will popup asking for the cert and works fine. So the issue doesn’t appear to be the phone getting the cert, just the Office Apps are not accessing the Phones cert Store. I can confirm the Cert is inside the work profile as a browser or cert viewer app inside the workprofile can see it, auths work fine when using a browser in work profile, just not outlook or teams inside the work profile. Read More
Copilot getting aloof when addressed as “Computer”.
Long story short, I’ve watched too much Star Trek, I pre-face any voice command with “Computer”. Copilot becomes very whimsical and aloof when I do this, any way to instruct the system to be more serious?
The issue started when I made a small joke by stating “Computer, tea, Earl Grey, hot.”, it was downhill from there.
Thanks.
Long story short, I’ve watched too much Star Trek, I pre-face any voice command with “Computer”. Copilot becomes very whimsical and aloof when I do this, any way to instruct the system to be more serious? The issue started when I made a small joke by stating “Computer, tea, Earl Grey, hot.”, it was downhill from there. Thanks. Read More
Team Android Mobile app syncing issue
I am writing to bring to your attention a critical issue affecting a significant portion of our fleet of Android devices. Approximately 10-20 percent of our devices are experiencing a perplexing problem with the Teams application, wherein certain teams fail to sync and update properly.
To date the only fix is for the user to log into a web browser version of teams and look at the teams channel it then updates on the tablet.
The symptoms of this issue are as follows: despite new posts being made in a channel, affected devices display outdated information and fail to reflect the latest updates. Consequently, users are unable to access crucial information in a timely manner, significantly impeding workflow and collaboration efforts.
To date, we have exhausted various troubleshooting measures, all of which have proven ineffective in resolving the issue. These include:
Clearing cache and temporary files: This action results in channels appearing blank, devoid of any data, including both old and new posts.
Logging out and then back in: Despite attempting to re-authenticate, the problem persists.
Deleting the Teams application from the device: Reinstalling the application has not yielded any improvements.
Interestingly, we have observed that if a user is tagged in a post, the content becomes accessible through the activity tab of Teams. However, this workaround is not a sustainable solution for our operational needs.
Given the severity of this issue and its adverse impact on our productivity, we urgently require your assistance in identifying and rectifying the root cause from the administrative side. Any insights or guidance you can provide to resolve this matter expediently would be greatly appreciated.
I am writing to bring to your attention a critical issue affecting a significant portion of our fleet of Android devices. Approximately 10-20 percent of our devices are experiencing a perplexing problem with the Teams application, wherein certain teams fail to sync and update properly.To date the only fix is for the user to log into a web browser version of teams and look at the teams channel it then updates on the tablet.The symptoms of this issue are as follows: despite new posts being made in a channel, affected devices display outdated information and fail to reflect the latest updates. Consequently, users are unable to access crucial information in a timely manner, significantly impeding workflow and collaboration efforts. To date, we have exhausted various troubleshooting measures, all of which have proven ineffective in resolving the issue. These include:Clearing cache and temporary files: This action results in channels appearing blank, devoid of any data, including both old and new posts.Logging out and then back in: Despite attempting to re-authenticate, the problem persists.Deleting the Teams application from the device: Reinstalling the application has not yielded any improvements. Interestingly, we have observed that if a user is tagged in a post, the content becomes accessible through the activity tab of Teams. However, this workaround is not a sustainable solution for our operational needs. Given the severity of this issue and its adverse impact on our productivity, we urgently require your assistance in identifying and rectifying the root cause from the administrative side. Any insights or guidance you can provide to resolve this matter expediently would be greatly appreciated. Read More
Library View “Files that need attention” JSON hide commands Error
Hi,
on a SharePoint Library i used a JSON to hide the new, upload and share button, describe here: Command bar customization syntax reference | Microsoft Learn
For my created views, this works perfectly. In my document library i have some required fields, and the out of the box view “Files that need attention“.
if i go to Format current view –> Switch to design mode -> And paste the same json there, i get an error: Error saving view format
the JSON i use:
{
“commandBarProps”: {
“commands”: [
{
“key”: “editInGridView”,
“hide”: true
}
]
}
}
Error Message:
in the Edge DEV tool i get an 400 Bad Request for the Views(@a2)/SetViewXml()?@..
The JSON is valid on a standard View, using different commands result in same error.
Do you know why this view cant be changed? so far i could not find any info about the view “File That need attention”
Is there a way to disable the View?
Best Johannes
Hi,on a SharePoint Library i used a JSON to hide the new, upload and share button, describe here: Command bar customization syntax reference | Microsoft Learn For my created views, this works perfectly. In my document library i have some required fields, and the out of the box view “Files that need attention”. if i go to Format current view –> Switch to design mode -> And paste the same json there, i get an error: Error saving view format the JSON i use:{ “$schema”: “https://developer.microsoft.com/json-schemas/sp/v2/row-formatting.schema.json”, “commandBarProps”: { “commands”: [ { “key”: “editInGridView”, “hide”: true } ] }}Error Message: in the Edge DEV tool i get an 400 Bad Request for the Views(@a2)/SetViewXml()?@.. The JSON is valid on a standard View, using different commands result in same error. Do you know why this view cant be changed? so far i could not find any info about the view “File That need attention” Is there a way to disable the View? Best Johannes Read More
how to draw a 5×5 three-dimensional planar array with isotropic elements using the formula AF_(n ) (θ,ϕ)= {1/M sin(M/2 ψ_x )/sin(ψ_x/2) }{1/N sin(N/2 ψ_y )/sin(ψ_y/2) }
seperti gambar berikutseperti gambar berikut seperti gambar berikut @all MATLAB Answers — New Questions
is it possible to restart progress of self-paced course
Started learning MATLAB Fundamentals then stopped for a few months. Would like to start again.Started learning MATLAB Fundamentals then stopped for a few months. Would like to start again. Started learning MATLAB Fundamentals then stopped for a few months. Would like to start again. matlab MATLAB Answers — New Questions
Is it possible to “move” points in 3D?
I have this scatter3 graph, I’m generating from CIE Lab coordinates :
Would it be too far-fetch to be able to select any points on the graph and "move" them in some direction? And recover their new positions?I have this scatter3 graph, I’m generating from CIE Lab coordinates :
Would it be too far-fetch to be able to select any points on the graph and "move" them in some direction? And recover their new positions? I have this scatter3 graph, I’m generating from CIE Lab coordinates :
Would it be too far-fetch to be able to select any points on the graph and "move" them in some direction? And recover their new positions? scatter3, editing points in 3d, cie lab, move points in 3d, handles MATLAB Answers — New Questions
