Category: News
Why does Edge keep signing me out?
This happens probably a few times a week and it’s getting really annoying. I’m signed out from my own account for no reason.
This happens probably a few times a week and it’s getting really annoying. I’m signed out from my own account for no reason. Read More
How to receive an full binary data using mqtt callback function
I have sent a binary blob (for example 4k) from C++ app by mqtt mosquitto. In matlab only a chunk of sending data is received. This chunk is limited by the first zero byte which is in the blob. How to receive a full message?
Short code snippest below:
mqttClient = mqttclient("tcp://127.0.0.1");
mySub = subscribe(mqttClient, "topic", Callback=@MsgCallvBack)
%
function MsgCallvBack(topic, data)
fprintf("topic=%s, data size=%un", topic, numel(char(data)));
endI have sent a binary blob (for example 4k) from C++ app by mqtt mosquitto. In matlab only a chunk of sending data is received. This chunk is limited by the first zero byte which is in the blob. How to receive a full message?
Short code snippest below:
mqttClient = mqttclient("tcp://127.0.0.1");
mySub = subscribe(mqttClient, "topic", Callback=@MsgCallvBack)
%
function MsgCallvBack(topic, data)
fprintf("topic=%s, data size=%un", topic, numel(char(data)));
end I have sent a binary blob (for example 4k) from C++ app by mqtt mosquitto. In matlab only a chunk of sending data is received. This chunk is limited by the first zero byte which is in the blob. How to receive a full message?
Short code snippest below:
mqttClient = mqttclient("tcp://127.0.0.1");
mySub = subscribe(mqttClient, "topic", Callback=@MsgCallvBack)
%
function MsgCallvBack(topic, data)
fprintf("topic=%s, data size=%un", topic, numel(char(data)));
end mqtt MATLAB Answers — New Questions
Error using fit>iFit Too many start points. You need 2 start points for this model
Dear all
I have created this function to do implement a fitting to some data:
function [fitresult,gof]=Fit(s,mag,in_mag,in_cond)
if round(in_mag(1))==1 && round(in_mag(end))==-1
fitting_function=’cos(2*atan(exp((x-x0)/Delta)))’;
elseif round(in_mag(1))==-1 && round(in_mag(end))==1
fitting_function=’cos(2*atan(exp(-(x-x0)/Delta)))’;
end
ft=fittype(fitting_function,’independent’,’x’,’dependent’,’y’);
opts=fitoptions(‘Method’,’NonlinearLeastSquares’);
opts.Display=’Off’;
opts.StartPoint=in_cond;
[fitresult,gof]=fit(space,mag,ft,opts);
When trying to fit some data:
initial_conditions=[1 1];
[fitresult,gof]=Fit(some_column_vector,other_column_vector,another_column_vector,initial_conditions’);
where "some_column_vector", "other_column_vector", and "another_column_vector" are 1000×1 arrays.
I received the following error:
Error using fit>iFit
Too many start points. You need 2 start points for this model.
Any ideas on what could be happening here?Dear all
I have created this function to do implement a fitting to some data:
function [fitresult,gof]=Fit(s,mag,in_mag,in_cond)
if round(in_mag(1))==1 && round(in_mag(end))==-1
fitting_function=’cos(2*atan(exp((x-x0)/Delta)))’;
elseif round(in_mag(1))==-1 && round(in_mag(end))==1
fitting_function=’cos(2*atan(exp(-(x-x0)/Delta)))’;
end
ft=fittype(fitting_function,’independent’,’x’,’dependent’,’y’);
opts=fitoptions(‘Method’,’NonlinearLeastSquares’);
opts.Display=’Off’;
opts.StartPoint=in_cond;
[fitresult,gof]=fit(space,mag,ft,opts);
When trying to fit some data:
initial_conditions=[1 1];
[fitresult,gof]=Fit(some_column_vector,other_column_vector,another_column_vector,initial_conditions’);
where "some_column_vector", "other_column_vector", and "another_column_vector" are 1000×1 arrays.
I received the following error:
Error using fit>iFit
Too many start points. You need 2 start points for this model.
Any ideas on what could be happening here? Dear all
I have created this function to do implement a fitting to some data:
function [fitresult,gof]=Fit(s,mag,in_mag,in_cond)
if round(in_mag(1))==1 && round(in_mag(end))==-1
fitting_function=’cos(2*atan(exp((x-x0)/Delta)))’;
elseif round(in_mag(1))==-1 && round(in_mag(end))==1
fitting_function=’cos(2*atan(exp(-(x-x0)/Delta)))’;
end
ft=fittype(fitting_function,’independent’,’x’,’dependent’,’y’);
opts=fitoptions(‘Method’,’NonlinearLeastSquares’);
opts.Display=’Off’;
opts.StartPoint=in_cond;
[fitresult,gof]=fit(space,mag,ft,opts);
When trying to fit some data:
initial_conditions=[1 1];
[fitresult,gof]=Fit(some_column_vector,other_column_vector,another_column_vector,initial_conditions’);
where "some_column_vector", "other_column_vector", and "another_column_vector" are 1000×1 arrays.
I received the following error:
Error using fit>iFit
Too many start points. You need 2 start points for this model.
Any ideas on what could be happening here? fitting MATLAB Answers — New Questions
华纳公司娱乐注册【QQ1398654119】
1.作为老街本土企业，、奉献，十余年的商业运营优势。
2.集团不仅成为东城品牌经济发展的引领者，更是成为带动时尚产业升级。
3.整合时尚产业链、引领时尚高端产业先机。
4.打造持续创新商业运营模式的“一站式”服务机构。
5.更是成为了用实力运营城市的城市运营商。腾龙将继续肩负这份责任与担当，为云南的发展不断贡献自身力量！
1.作为老街本土企业，、奉献，十余年的商业运营优势。2.集团不仅成为东城品牌经济发展的引领者，更是成为带动时尚产业升级。3.整合时尚产业链、引领时尚高端产业先机。4.打造持续创新商业运营模式的“一站式”服务机构。5.更是成为了用实力运营城市的城市运营商。腾龙将继续肩负这份责任与担当，为云南的发展不断贡献自身力量！ Read More
Properties of Taskbar Shortcuts
I am unable to find the Properties option when I right-click on some taskbar shortcuts and I want to change their icons. The only option available is to unpin them from the taskbar. What could I be overlooking?
I am unable to find the Properties option when I right-click on some taskbar shortcuts and I want to change their icons. The only option available is to unpin them from the taskbar. What could I be overlooking? Read More
Learn User Interface (UI) Design for Windows 11
I recently got a new HP computer with the Windows 11 operating system as a Christmas gift. I was previously using Windows 8.1 with a layout resembling Windows 7. Transitioning to the new Windows 11 interface feels somewhat foreign to me, almost like navigating an Apple interface. Can you recommend any tutorials or books that can help ease me into the Windows 11 interface from my familiarity with Windows 8.1? I’m currently unsure how to properly shut down the computer, aside from pressing the physical power button. The new laptop is an HP model, and I’m sending this message from my Windows 8.1 laptop because I’m not sure how to access this platform from my Windows 11 device. Thank you for your assistance. – Jon
I recently got a new HP computer with the Windows 11 operating system as a Christmas gift. I was previously using Windows 8.1 with a layout resembling Windows 7. Transitioning to the new Windows 11 interface feels somewhat foreign to me, almost like navigating an Apple interface. Can you recommend any tutorials or books that can help ease me into the Windows 11 interface from my familiarity with Windows 8.1? I’m currently unsure how to properly shut down the computer, aside from pressing the physical power button. The new laptop is an HP model, and I’m sending this message from my Windows 8.1 laptop because I’m not sure how to access this platform from my Windows 11 device. Thank you for your assistance. – Jon Read More
How to Generate HEIC Thumbnails in Windows 11 Using nCache
Lately, I’ve switched to using HEIC images to conserve storage space, and I’m quite satisfied with the format’s quality and compression benefits. However, I’ve encountered an issue with the extended loading time of thumbnails when I access a folder containing HEIC images. While I expect the initial load to take some time, it’s frustrating that every time I reopen the folder, the HEIC thumbnails are reloaded from scratch.
I’m looking for a solution in Windows 11 that can cache HEIC thumbnails to enable quick access to the folder contents after the initial load.
I store the images on my hard drive, so I anticipate they should load swiftly. Despite having thumbnail caching enabled in my Windows settings, it doesn’t seem to be functioning properly.
Here are the system specifications:
– Device: HP Envy 17 2023
– Processor: 13th Gen Intel(R) Core(TM) i7-1355U, 1.70 GHz
– RAM: 32.0 GB
– OS: Windows 11 Pro 22H2
– Storage: 1TB SSD
I appreciate any guidance or assistance in resolving this issue.
Lately, I’ve switched to using HEIC images to conserve storage space, and I’m quite satisfied with the format’s quality and compression benefits. However, I’ve encountered an issue with the extended loading time of thumbnails when I access a folder containing HEIC images. While I expect the initial load to take some time, it’s frustrating that every time I reopen the folder, the HEIC thumbnails are reloaded from scratch. I’m looking for a solution in Windows 11 that can cache HEIC thumbnails to enable quick access to the folder contents after the initial load. I store the images on my hard drive, so I anticipate they should load swiftly. Despite having thumbnail caching enabled in my Windows settings, it doesn’t seem to be functioning properly. Here are the system specifications:- Device: HP Envy 17 2023- Processor: 13th Gen Intel(R) Core(TM) i7-1355U, 1.70 GHz- RAM: 32.0 GB- OS: Windows 11 Pro 22H2- Storage: 1TB SSD I appreciate any guidance or assistance in resolving this issue. Read More
How to Disable ctmon.exe (CTF Loader)
New update: Winver 22H2 Build 22621.521
I used to be able to halt this loading process in prior versions, but in this latest version, I am unable to stop the service or modify its properties. Any suggestions on how to address this issue?
New update: Winver 22H2 Build 22621.521 I used to be able to halt this loading process in prior versions, but in this latest version, I am unable to stop the service or modify its properties. Any suggestions on how to address this issue? Read More
How to Disable or Remove Ctfmon.exe?
Recently, I have been utilizing a small software tool known as “Ctfmon Eliminator” for several years. However, upon running this application, I receive a variety of responses, none of which effectively remove the Ctfmon.exe file from my computer. My goal is to completely eliminate this file from my PC, and I am seeking a script or application that can accomplish this task. Despite my efforts, I have yet to discover such a program. Any suggestions or assistance in this matter would be greatly welcomed.
Recently, I have been utilizing a small software tool known as “Ctfmon Eliminator” for several years. However, upon running this application, I receive a variety of responses, none of which effectively remove the Ctfmon.exe file from my computer. My goal is to completely eliminate this file from my PC, and I am seeking a script or application that can accomplish this task. Despite my efforts, I have yet to discover such a program. Any suggestions or assistance in this matter would be greatly welcomed. Read More
Choose an app selection freeze
When Windows prompts a message saying, “Please choose an application to open this [file extension] file,” it causes the system to freeze. Despite my efforts to find a solution through online searches, I’ve had no success. With ongoing issues on my Windows 10 computer and the imminent mandatory update to Windows 11, I finally decided to upgrade on December 23. Unfortunately, this issue remains unresolved and is becoming increasingly frustrating. I am considering whether a major system overhaul will be necessary. There have been indications that the crashes may be linked to the Settings feature, but I have not come across any specific solutions. Thank you in advance for any assistance.
When Windows prompts a message saying, “Please choose an application to open this [file extension] file,” it causes the system to freeze. Despite my efforts to find a solution through online searches, I’ve had no success. With ongoing issues on my Windows 10 computer and the imminent mandatory update to Windows 11, I finally decided to upgrade on December 23. Unfortunately, this issue remains unresolved and is becoming increasingly frustrating. I am considering whether a major system overhaul will be necessary. There have been indications that the crashes may be linked to the Settings feature, but I have not come across any specific solutions. Thank you in advance for any assistance. Read More
Improving the Battery Life of Your Laptop
Hello there,
I’m reaching out because I’ve been experiencing issues with the battery life of my MSI Delta 15 laptop, which seems to have significantly reduced after a year and a half of use. Despite being informed by the MSI center that the battery is in good health, I’m only getting about 3 hours of usage now, which doesn’t align with my expectations.
I’m eager to understand the definitive answer regarding the expected battery life of my MSI Delta 15. If the original battery is deemed to be in good condition, why am I only getting 3 hours instead of the expected 6 to 7 hours?
Any advice or assistance on this matter would be greatly appreciated. Wishing you a wonderful year ahead and a fantastic 2024!
Warm regards,
Hello there, I’m reaching out because I’ve been experiencing issues with the battery life of my MSI Delta 15 laptop, which seems to have significantly reduced after a year and a half of use. Despite being informed by the MSI center that the battery is in good health, I’m only getting about 3 hours of usage now, which doesn’t align with my expectations. I’m eager to understand the definitive answer regarding the expected battery life of my MSI Delta 15. If the original battery is deemed to be in good condition, why am I only getting 3 hours instead of the expected 6 to 7 hours? Any advice or assistance on this matter would be greatly appreciated. Wishing you a wonderful year ahead and a fantastic 2024! Warm regards, Read More
“Revamp Your Toolbar with New Icons”
Hello,
I am experiencing an issue where my toolbar icons are only displaying half of the icon (refer to the attached picture). Could you please advise me on how to restore them to full icons?
Thank you for your assistance.
Sincerely,
[Your Name]
P.S. I am using a new computer.
Hello, I am experiencing an issue where my toolbar icons are only displaying half of the icon (refer to the attached picture). Could you please advise me on how to restore them to full icons? Thank you for your assistance. Sincerely,[Your Name]P.S. I am using a new computer. Read More
“How can I identify and remove this type/location of notification?”
I am having trouble finding tutorials on how to remove a certain feature because I am unsure of its name. It is not called the system tray. I have also already attempted to disable notifications in the settings.
I am having trouble finding tutorials on how to remove a certain feature because I am unsure of its name. It is not called the system tray. I have also already attempted to disable notifications in the settings. Read More
How to approximate a measured frequency response function to the sum of 2 1DOF vibration FRF functions?
I have measured the vibration frequency response function a structure (blue curves in the following diagrams).
By using command
SYSD=tfest(SYSFR,5);
% SYSFR is the measured result (imported beginning from 25 Hz, as the
% low-frequency area is not accurate). SYSD is the approximated FRF.
I can approximate the measured FRF to a transfer function with 5 poles (the least amount of poles needed for the approximation to be accurate enough).
Since the measured FRF curves clearly have the shape of 2DOF vibration system, I want to further approximate the transfer function as the sum of two 1DOF vibration transfer functions, and draw both 1DOF vibration FRF curves in diagram (like in the following diagram). How to achieve this? The approximation can either be done based on measured FRF or approximated 5-pole FRF.I have measured the vibration frequency response function a structure (blue curves in the following diagrams).
By using command
SYSD=tfest(SYSFR,5);
% SYSFR is the measured result (imported beginning from 25 Hz, as the
% low-frequency area is not accurate). SYSD is the approximated FRF.
I can approximate the measured FRF to a transfer function with 5 poles (the least amount of poles needed for the approximation to be accurate enough).
Since the measured FRF curves clearly have the shape of 2DOF vibration system, I want to further approximate the transfer function as the sum of two 1DOF vibration transfer functions, and draw both 1DOF vibration FRF curves in diagram (like in the following diagram). How to achieve this? The approximation can either be done based on measured FRF or approximated 5-pole FRF. I have measured the vibration frequency response function a structure (blue curves in the following diagrams).
By using command
SYSD=tfest(SYSFR,5);
% SYSFR is the measured result (imported beginning from 25 Hz, as the
% low-frequency area is not accurate). SYSD is the approximated FRF.
I can approximate the measured FRF to a transfer function with 5 poles (the least amount of poles needed for the approximation to be accurate enough).
Since the measured FRF curves clearly have the shape of 2DOF vibration system, I want to further approximate the transfer function as the sum of two 1DOF vibration transfer functions, and draw both 1DOF vibration FRF curves in diagram (like in the following diagram). How to achieve this? The approximation can either be done based on measured FRF or approximated 5-pole FRF. frequency, transfer function MATLAB Answers — New Questions
I want my code conditions checked every 1/2000th of a second, how can I do that?
I have multiple if conditions that is being checked to provide pulse and gate signals to switches I want that these conditions be checked every 1/2000th of a second. I tried for loop and tic toc methods but the condition is being checked at a frequency of 200kHz. I am not able to solve this issue kindly helpI have multiple if conditions that is being checked to provide pulse and gate signals to switches I want that these conditions be checked every 1/2000th of a second. I tried for loop and tic toc methods but the condition is being checked at a frequency of 200kHz. I am not able to solve this issue kindly help I have multiple if conditions that is being checked to provide pulse and gate signals to switches I want that these conditions be checked every 1/2000th of a second. I tried for loop and tic toc methods but the condition is being checked at a frequency of 200kHz. I am not able to solve this issue kindly help loop condition, if statement, for loop MATLAB Answers — New Questions
Error in Battery.Pulsesequence/Createpulses
Hello everyone,
I am trying to implement the Battery Pulse sequence object for the dataset I have currently.
The example dataset consists of 26 pulses and my dataset has 11.
When I am trying to implement the Pulse sequence object to my dataset, I am ending up with the following error message:
"Index in position 1 exceeds array bounds. Index must not exceed 11.
Error in Battery.PulseSequence/createPulses
Error in Trial_script_test_data (line 30)
psObj.createPulses(‘CurrentOnThreshold’,3) %minimum current magnitude to identify pulse events"
How and where do I define the pulses as 11 in ‘createpulses’
psObj.createPulses(…
‘CurrentOnThreshold’,3,… %minimum current magnitude to identify pulse events
‘NumRCBranches’,2,… %how many RC pairs in the model
‘RCBranchesUse2TimeConstants’,false,… %do RC pairs have different time constant for discharge and rest?
‘PreBufferSamples’,2,… %how many samples to include before the current pulse starts
‘PostBufferSamples’,4); %how many samples to include after the next pulse starts
This is my version of the script.Hello everyone,
I am trying to implement the Battery Pulse sequence object for the dataset I have currently.
The example dataset consists of 26 pulses and my dataset has 11.
When I am trying to implement the Pulse sequence object to my dataset, I am ending up with the following error message:
"Index in position 1 exceeds array bounds. Index must not exceed 11.
Error in Battery.PulseSequence/createPulses
Error in Trial_script_test_data (line 30)
psObj.createPulses(‘CurrentOnThreshold’,3) %minimum current magnitude to identify pulse events"
How and where do I define the pulses as 11 in ‘createpulses’
psObj.createPulses(…
‘CurrentOnThreshold’,3,… %minimum current magnitude to identify pulse events
‘NumRCBranches’,2,… %how many RC pairs in the model
‘RCBranchesUse2TimeConstants’,false,… %do RC pairs have different time constant for discharge and rest?
‘PreBufferSamples’,2,… %how many samples to include before the current pulse starts
‘PostBufferSamples’,4); %how many samples to include after the next pulse starts
This is my version of the script. Hello everyone,
I am trying to implement the Battery Pulse sequence object for the dataset I have currently.
The example dataset consists of 26 pulses and my dataset has 11.
When I am trying to implement the Pulse sequence object to my dataset, I am ending up with the following error message:
"Index in position 1 exceeds array bounds. Index must not exceed 11.
Error in Battery.PulseSequence/createPulses
Error in Trial_script_test_data (line 30)
psObj.createPulses(‘CurrentOnThreshold’,3) %minimum current magnitude to identify pulse events"
How and where do I define the pulses as 11 in ‘createpulses’
psObj.createPulses(…
‘CurrentOnThreshold’,3,… %minimum current magnitude to identify pulse events
‘NumRCBranches’,2,… %how many RC pairs in the model
‘RCBranchesUse2TimeConstants’,false,… %do RC pairs have different time constant for discharge and rest?
‘PreBufferSamples’,2,… %how many samples to include before the current pulse starts
‘PostBufferSamples’,4); %how many samples to include after the next pulse starts
This is my version of the script. battery_system_management, ecm MATLAB Answers — New Questions
Excel not responding
When I click View > Page Layout to add the header and footer the excel start not responding and I close and restart the page few times already, can someone help
When I click View > Page Layout to add the header and footer the excel start not responding and I close and restart the page few times already, can someone help Read More
using backpropagation neural network for fuel consumption prediction
I want to use three datasets in the model development; the worked hours, the loads and the fuel consumed by the truck.I want to use the worked hours and loads as the inputs(Two Inputs) and the fuel consumed as the target(output data). my dataset is consist of 80 records and i want to divide it into two sub datasets:training and testing. 65% of the total data for training and the remaining 35% for testing so as to validate accuracy of the model.The number of neuron in the hidden layer should be set to 1 initially and the hyperbolic tangent sigmiod function should be used as the transfer function.The data should be run to be run to give an output with the calculated error between the target and the output(predicted). The error should then be back propagated through the network for adjustments.The process should be repeated by varing the neuron number till the error is minimal. The model should then be simulated to ascertain the validity by using the testing data.The optimim number of neuron that gives the best results should be selected based on the correlation coefficient and the mean absolute percentage error for the testing data.The architecture of the BPNN should be developed.Find the data to be used in is below
WORKED HOURS(Hrs) : 299.9 372.3 401.9 429.5 358.3 79.6 310.3 176.4 221.05 187.6 433.6 243 480.5 203.5 426.8 456.6 473.2 350.4 474 161.4 390.8 471.7 266.3 496.6 423.7 320.9 18.1 504.5 531.5 514.8 519.3 513.2 49 206.3 416.8 290.9 368.9 484.6 209 225.6 439.6 461.9 352.3 455.3 475.6 445.1 346.5 469.7 288.7 306.3 170.6 391.7 147.4 392 343.6 223.6 67.1 361.6 279.5 361.3 451.7 76.6 344.8 352.3 347.7 450.6 434.7 365.9 327.6 451.5 433 361.9 180.3 466.5 415.6 461.7 437.1 478.3 325.2 499.7
LOADS (BCM) 1129 972 703 1199 1438 1144 1092 1526 772 1018 1415 1026 424 931 489 1044 135 181 1488 1038 1112 1191 149 1607 830 944 595 744 1126 1386 922 1217 1471 1124 1490 1436 1095 1266 1245 1384 1183 1299 940 1215 1098 1125 929 1307 1253 1407 1471 836 994 1138 1576 1066 1138 1106 1170 1283 942 1420 663 1167 1118 1254 1214 1187 1387 1311 1108 1336 1082 1435 1326 1188 1527 1036 1172 1517
FUEL CONSUMED (l/bcm)
40,733.00 46,375.00 50,797.00 49,706.00 45,092.00 34,543.87 36,687.62 44,899.04 37,023.81 40,458.24 34,383.52 25,914.49 34,300.42 46,685.87 54,122.83 47,242.32 46,296.99 61,800.78 58,181.10 40,579.12 56,890.57 60,295.81 61,843.33 63,156.89 60,320.82 56,141.04 58,063.53 46,379.00 44,011.00 44,191.00 42,089.00 45,682.00 50,666.00 45,643.00 46,568.00 49,162.00 47,871.63 45,012.70 40,345.86 43,233.45 41,408.20 52,169.66 53,161.51 46,553.05 52,353.93 49,019.43 42,015.50 35,327.23 35,025.50 28,207.78 39,435.27 42,200.30 26,677.27 45,977.46 27,870.61 22,335.77 41,153.24 36,260.02 40,901.63 42,274.00 41,501.00 39,189.00 36,349.00 38,545.00 38,625.00 32,907.00 30,153.00 29,142.58 26,813.88 34,488.11 40,575.67 43,439.41 45,374.04 47,730.75 58,335.01 48,531.21 45,510.96 51,891.60 42,902.32 32,819.21I want to use three datasets in the model development; the worked hours, the loads and the fuel consumed by the truck.I want to use the worked hours and loads as the inputs(Two Inputs) and the fuel consumed as the target(output data). my dataset is consist of 80 records and i want to divide it into two sub datasets:training and testing. 65% of the total data for training and the remaining 35% for testing so as to validate accuracy of the model.The number of neuron in the hidden layer should be set to 1 initially and the hyperbolic tangent sigmiod function should be used as the transfer function.The data should be run to be run to give an output with the calculated error between the target and the output(predicted). The error should then be back propagated through the network for adjustments.The process should be repeated by varing the neuron number till the error is minimal. The model should then be simulated to ascertain the validity by using the testing data.The optimim number of neuron that gives the best results should be selected based on the correlation coefficient and the mean absolute percentage error for the testing data.The architecture of the BPNN should be developed.Find the data to be used in is below
WORKED HOURS(Hrs) : 299.9 372.3 401.9 429.5 358.3 79.6 310.3 176.4 221.05 187.6 433.6 243 480.5 203.5 426.8 456.6 473.2 350.4 474 161.4 390.8 471.7 266.3 496.6 423.7 320.9 18.1 504.5 531.5 514.8 519.3 513.2 49 206.3 416.8 290.9 368.9 484.6 209 225.6 439.6 461.9 352.3 455.3 475.6 445.1 346.5 469.7 288.7 306.3 170.6 391.7 147.4 392 343.6 223.6 67.1 361.6 279.5 361.3 451.7 76.6 344.8 352.3 347.7 450.6 434.7 365.9 327.6 451.5 433 361.9 180.3 466.5 415.6 461.7 437.1 478.3 325.2 499.7
LOADS (BCM) 1129 972 703 1199 1438 1144 1092 1526 772 1018 1415 1026 424 931 489 1044 135 181 1488 1038 1112 1191 149 1607 830 944 595 744 1126 1386 922 1217 1471 1124 1490 1436 1095 1266 1245 1384 1183 1299 940 1215 1098 1125 929 1307 1253 1407 1471 836 994 1138 1576 1066 1138 1106 1170 1283 942 1420 663 1167 1118 1254 1214 1187 1387 1311 1108 1336 1082 1435 1326 1188 1527 1036 1172 1517
FUEL CONSUMED (l/bcm)
40,733.00 46,375.00 50,797.00 49,706.00 45,092.00 34,543.87 36,687.62 44,899.04 37,023.81 40,458.24 34,383.52 25,914.49 34,300.42 46,685.87 54,122.83 47,242.32 46,296.99 61,800.78 58,181.10 40,579.12 56,890.57 60,295.81 61,843.33 63,156.89 60,320.82 56,141.04 58,063.53 46,379.00 44,011.00 44,191.00 42,089.00 45,682.00 50,666.00 45,643.00 46,568.00 49,162.00 47,871.63 45,012.70 40,345.86 43,233.45 41,408.20 52,169.66 53,161.51 46,553.05 52,353.93 49,019.43 42,015.50 35,327.23 35,025.50 28,207.78 39,435.27 42,200.30 26,677.27 45,977.46 27,870.61 22,335.77 41,153.24 36,260.02 40,901.63 42,274.00 41,501.00 39,189.00 36,349.00 38,545.00 38,625.00 32,907.00 30,153.00 29,142.58 26,813.88 34,488.11 40,575.67 43,439.41 45,374.04 47,730.75 58,335.01 48,531.21 45,510.96 51,891.60 42,902.32 32,819.21 I want to use three datasets in the model development; the worked hours, the loads and the fuel consumed by the truck.I want to use the worked hours and loads as the inputs(Two Inputs) and the fuel consumed as the target(output data). my dataset is consist of 80 records and i want to divide it into two sub datasets:training and testing. 65% of the total data for training and the remaining 35% for testing so as to validate accuracy of the model.The number of neuron in the hidden layer should be set to 1 initially and the hyperbolic tangent sigmiod function should be used as the transfer function.The data should be run to be run to give an output with the calculated error between the target and the output(predicted). The error should then be back propagated through the network for adjustments.The process should be repeated by varing the neuron number till the error is minimal. The model should then be simulated to ascertain the validity by using the testing data.The optimim number of neuron that gives the best results should be selected based on the correlation coefficient and the mean absolute percentage error for the testing data.The architecture of the BPNN should be developed.Find the data to be used in is below
WORKED HOURS(Hrs) : 299.9 372.3 401.9 429.5 358.3 79.6 310.3 176.4 221.05 187.6 433.6 243 480.5 203.5 426.8 456.6 473.2 350.4 474 161.4 390.8 471.7 266.3 496.6 423.7 320.9 18.1 504.5 531.5 514.8 519.3 513.2 49 206.3 416.8 290.9 368.9 484.6 209 225.6 439.6 461.9 352.3 455.3 475.6 445.1 346.5 469.7 288.7 306.3 170.6 391.7 147.4 392 343.6 223.6 67.1 361.6 279.5 361.3 451.7 76.6 344.8 352.3 347.7 450.6 434.7 365.9 327.6 451.5 433 361.9 180.3 466.5 415.6 461.7 437.1 478.3 325.2 499.7
LOADS (BCM) 1129 972 703 1199 1438 1144 1092 1526 772 1018 1415 1026 424 931 489 1044 135 181 1488 1038 1112 1191 149 1607 830 944 595 744 1126 1386 922 1217 1471 1124 1490 1436 1095 1266 1245 1384 1183 1299 940 1215 1098 1125 929 1307 1253 1407 1471 836 994 1138 1576 1066 1138 1106 1170 1283 942 1420 663 1167 1118 1254 1214 1187 1387 1311 1108 1336 1082 1435 1326 1188 1527 1036 1172 1517
FUEL CONSUMED (l/bcm)
40,733.00 46,375.00 50,797.00 49,706.00 45,092.00 34,543.87 36,687.62 44,899.04 37,023.81 40,458.24 34,383.52 25,914.49 34,300.42 46,685.87 54,122.83 47,242.32 46,296.99 61,800.78 58,181.10 40,579.12 56,890.57 60,295.81 61,843.33 63,156.89 60,320.82 56,141.04 58,063.53 46,379.00 44,011.00 44,191.00 42,089.00 45,682.00 50,666.00 45,643.00 46,568.00 49,162.00 47,871.63 45,012.70 40,345.86 43,233.45 41,408.20 52,169.66 53,161.51 46,553.05 52,353.93 49,019.43 42,015.50 35,327.23 35,025.50 28,207.78 39,435.27 42,200.30 26,677.27 45,977.46 27,870.61 22,335.77 41,153.24 36,260.02 40,901.63 42,274.00 41,501.00 39,189.00 36,349.00 38,545.00 38,625.00 32,907.00 30,153.00 29,142.58 26,813.88 34,488.11 40,575.67 43,439.41 45,374.04 47,730.75 58,335.01 48,531.21 45,510.96 51,891.60 42,902.32 32,819.21 modeling, machine learning, neural network, fuel vs loads time MATLAB Answers — New Questions
Global ylabel and colorbar in tiledlayout environment
Dear all
I am creating a figure in tiledlayout environment through a code of the form:
% First layer
u1=figure(‘visible’,’off’,’units’,’pixels’,’position’,[0 0 1920 1080]);
t=tiledlayout("vertical");
title(t,[‘Trilayer. First layer. LLG-Heun, $t=1.09$ ns. $T=0$ K, $mathbf{H}=left( 0.5 , , mathrm{T} right) mathbf{hat{z}}$’;”;”],’FontSize’,19,’interpreter’,’latex’);
nexttile;
uimagesc(space_x,space_y,lx_1);
axis xy;
clim([-1 1]);
colormap(bluewhitered(256));
box on;
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t1=title([‘$l^{mathrm{intra}}_x$’],’FontSize’,20,’interpreter’,’latex’);
set(t1,’interpreter’,’latex’,’FontSize’,20);
set(gca,’XTickLabel’,[]);
yticks([0:50/4:50]);
nexttile;
uimagesc(space_x,space_y,ly_1);
clim([-1 1]);
colormap(bluewhitered(256));
axis xy;
box on;
clr2=colorbar;
set(clr2,’TickLabelInterpreter’,’latex’);
ylabel(‘$y$-{it th} spatial direction, $y , , left( mathrm{nm} right)$’,’FontSize’,18,’interpreter’,’latex’);
ylabel(clr2,’$i$-{it th} intralayer Ne”el vector component, $l^{mathrm{intra}}_i$’,’Interpreter’,’Latex’,’FontSize’,19);
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t2=title([‘$l^{mathrm{intra}}_y$’],’FontSize’,20,’interpreter’,’latex’);
set(t2,’interpreter’,’latex’,’FontSize’,20);
set(gca,’XTickLabel’,[]);
yticks([0:50/4:50]);
nexttile;
uimagesc(space_x,space_y,lz_1);
box on;
axis xy;
clim([-1 1]);
colormap(bluewhitered(256));
xlabel(‘$x$-{it th} spatial direction, $x , , left( mathrm{nm} right)$’,’FontSize’,18,’interpreter’,’latex’);
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t3=title([‘$l^{mathrm{intra}}_z$’],’FontSize’,20,’interpreter’,’latex’);
set(t3,’interpreter’,’latex’,’FontSize’,20);
yticks([0:50/4:50]);
set(gcf,’color’,’white’);
set(gca,’Units’,’normalized’);
set(u1,’Units’,’Inches’);
posu1=get(u1,’Position’);
set(u1,’PaperPositionMode’,’Auto’,’PaperUnits’,’Inches’,’PaperSize’,[posu1(3),posu1(4)]);
which gives rise to:
I would like to have the ylabel "y-th spatial direction…" centered in the second plot, but covering the three y-axis (as it is now, but with a higher separation from the yticklabels (0 12.5…) to the left. Moreover, I want the same for the colorbar, that it is, to be the global one for the three plots, with higher horizontal separation to the right, and with a longer aspect (from the bottom of the bottom plot to the top of the top plot).
Any ideas?Dear all
I am creating a figure in tiledlayout environment through a code of the form:
% First layer
u1=figure(‘visible’,’off’,’units’,’pixels’,’position’,[0 0 1920 1080]);
t=tiledlayout("vertical");
title(t,[‘Trilayer. First layer. LLG-Heun, $t=1.09$ ns. $T=0$ K, $mathbf{H}=left( 0.5 , , mathrm{T} right) mathbf{hat{z}}$’;”;”],’FontSize’,19,’interpreter’,’latex’);
nexttile;
uimagesc(space_x,space_y,lx_1);
axis xy;
clim([-1 1]);
colormap(bluewhitered(256));
box on;
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t1=title([‘$l^{mathrm{intra}}_x$’],’FontSize’,20,’interpreter’,’latex’);
set(t1,’interpreter’,’latex’,’FontSize’,20);
set(gca,’XTickLabel’,[]);
yticks([0:50/4:50]);
nexttile;
uimagesc(space_x,space_y,ly_1);
clim([-1 1]);
colormap(bluewhitered(256));
axis xy;
box on;
clr2=colorbar;
set(clr2,’TickLabelInterpreter’,’latex’);
ylabel(‘$y$-{it th} spatial direction, $y , , left( mathrm{nm} right)$’,’FontSize’,18,’interpreter’,’latex’);
ylabel(clr2,’$i$-{it th} intralayer Ne”el vector component, $l^{mathrm{intra}}_i$’,’Interpreter’,’Latex’,’FontSize’,19);
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t2=title([‘$l^{mathrm{intra}}_y$’],’FontSize’,20,’interpreter’,’latex’);
set(t2,’interpreter’,’latex’,’FontSize’,20);
set(gca,’XTickLabel’,[]);
yticks([0:50/4:50]);
nexttile;
uimagesc(space_x,space_y,lz_1);
box on;
axis xy;
clim([-1 1]);
colormap(bluewhitered(256));
xlabel(‘$x$-{it th} spatial direction, $x , , left( mathrm{nm} right)$’,’FontSize’,18,’interpreter’,’latex’);
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t3=title([‘$l^{mathrm{intra}}_z$’],’FontSize’,20,’interpreter’,’latex’);
set(t3,’interpreter’,’latex’,’FontSize’,20);
yticks([0:50/4:50]);
set(gcf,’color’,’white’);
set(gca,’Units’,’normalized’);
set(u1,’Units’,’Inches’);
posu1=get(u1,’Position’);
set(u1,’PaperPositionMode’,’Auto’,’PaperUnits’,’Inches’,’PaperSize’,[posu1(3),posu1(4)]);
which gives rise to:
I would like to have the ylabel "y-th spatial direction…" centered in the second plot, but covering the three y-axis (as it is now, but with a higher separation from the yticklabels (0 12.5…) to the left. Moreover, I want the same for the colorbar, that it is, to be the global one for the three plots, with higher horizontal separation to the right, and with a longer aspect (from the bottom of the bottom plot to the top of the top plot).
Any ideas? Dear all
I am creating a figure in tiledlayout environment through a code of the form:
% First layer
u1=figure(‘visible’,’off’,’units’,’pixels’,’position’,[0 0 1920 1080]);
t=tiledlayout("vertical");
title(t,[‘Trilayer. First layer. LLG-Heun, $t=1.09$ ns. $T=0$ K, $mathbf{H}=left( 0.5 , , mathrm{T} right) mathbf{hat{z}}$’;”;”],’FontSize’,19,’interpreter’,’latex’);
nexttile;
uimagesc(space_x,space_y,lx_1);
axis xy;
clim([-1 1]);
colormap(bluewhitered(256));
box on;
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t1=title([‘$l^{mathrm{intra}}_x$’],’FontSize’,20,’interpreter’,’latex’);
set(t1,’interpreter’,’latex’,’FontSize’,20);
set(gca,’XTickLabel’,[]);
yticks([0:50/4:50]);
nexttile;
uimagesc(space_x,space_y,ly_1);
clim([-1 1]);
colormap(bluewhitered(256));
axis xy;
box on;
clr2=colorbar;
set(clr2,’TickLabelInterpreter’,’latex’);
ylabel(‘$y$-{it th} spatial direction, $y , , left( mathrm{nm} right)$’,’FontSize’,18,’interpreter’,’latex’);
ylabel(clr2,’$i$-{it th} intralayer Ne”el vector component, $l^{mathrm{intra}}_i$’,’Interpreter’,’Latex’,’FontSize’,19);
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t2=title([‘$l^{mathrm{intra}}_y$’],’FontSize’,20,’interpreter’,’latex’);
set(t2,’interpreter’,’latex’,’FontSize’,20);
set(gca,’XTickLabel’,[]);
yticks([0:50/4:50]);
nexttile;
uimagesc(space_x,space_y,lz_1);
box on;
axis xy;
clim([-1 1]);
colormap(bluewhitered(256));
xlabel(‘$x$-{it th} spatial direction, $x , , left( mathrm{nm} right)$’,’FontSize’,18,’interpreter’,’latex’);
xlim([0 200]);
xticks([0:50:200]);
ylim([0 50]);
yticks([0:10:50]);
pbaspect([max(space_x)/max(space_y) 1 1]);
xtickangle(0);
set(gca,’TickLabelInterpreter’,’latex’,’FontSize’,18);
t3=title([‘$l^{mathrm{intra}}_z$’],’FontSize’,20,’interpreter’,’latex’);
set(t3,’interpreter’,’latex’,’FontSize’,20);
yticks([0:50/4:50]);
set(gcf,’color’,’white’);
set(gca,’Units’,’normalized’);
set(u1,’Units’,’Inches’);
posu1=get(u1,’Position’);
set(u1,’PaperPositionMode’,’Auto’,’PaperUnits’,’Inches’,’PaperSize’,[posu1(3),posu1(4)]);
which gives rise to:
I would like to have the ylabel "y-th spatial direction…" centered in the second plot, but covering the three y-axis (as it is now, but with a higher separation from the yticklabels (0 12.5…) to the left. Moreover, I want the same for the colorbar, that it is, to be the global one for the three plots, with higher horizontal separation to the right, and with a longer aspect (from the bottom of the bottom plot to the top of the top plot).
Any ideas? tiledlayout MATLAB Answers — New Questions
How to Use Kiosk Mode in Windows 11 to Limit App Access to Files and Directories
I have been experimenting with enabling kiosk mode on a Windows 11 Pro system using a local account with administrator privileges. The process of transitioning the computer to kiosk mode was done by navigating through Settings, Family, and Kiosk settings, which resulted in the creation of a new user account named “Kiosk” with the necessary application access. Everything appeared to be functioning properly at that point.
Although I followed a tutorial found on YouTube, a significant issue has arisen. The application within kiosk mode utilizes the “Open File” feature to access files, such as photos, saved on the computer. Since the user has been granted administrator permissions as part of the kiosk setup, there is a concern that users may browse through the entire file system and potentially make changes to files and folders via the File Open dialog. Is there a way to restrict the kiosk user account from having admin rights or limit the application’s access to a specific folder only? I want to ensure that users are unable to alter files outside of a designated area. How can this limitation be implemented in a straightforward manner?
I have been experimenting with enabling kiosk mode on a Windows 11 Pro system using a local account with administrator privileges. The process of transitioning the computer to kiosk mode was done by navigating through Settings, Family, and Kiosk settings, which resulted in the creation of a new user account named “Kiosk” with the necessary application access. Everything appeared to be functioning properly at that point. Although I followed a tutorial found on YouTube, a significant issue has arisen. The application within kiosk mode utilizes the “Open File” feature to access files, such as photos, saved on the computer. Since the user has been granted administrator permissions as part of the kiosk setup, there is a concern that users may browse through the entire file system and potentially make changes to files and folders via the File Open dialog. Is there a way to restrict the kiosk user account from having admin rights or limit the application’s access to a specific folder only? I want to ensure that users are unable to alter files outside of a designated area. How can this limitation be implemented in a straightforward manner? Read More
