Category: News
In Ap Designer: put new data into a (ui)table
This should be easy… Data comes in from a serial device consisting of a character and a number (time in msec) and I want to insert it into a table on screen.
I’ve got my serial callback working (after much effort) and I thought the next step would be easier. I have created a uitable that is displayed on the screen. Empty at first, called ResultsTable and thus referred to as app.ResultsTable with 2 columns named ‘Event’ and ‘Time’. Everything else about the table is defaulted.
The app.ResultsTable.Data is initially [ ] as expected and as each bit of info comes in I want to add it to the table. Serial callback parsed the input into PType (a character) and PTime (uint32) so why does
app.ResultsTable.Data(app.NextTrial,’Event’) = char(PType);
app.ResultsTable.Data(app.NextTrial,’Time’) = PData;
Give me multiple columns where the number of columns is the ascii value of the character? If PType is ‘A’ I get 64 zeros and then a 65. I’ve tried various combinations of [ PType PData ] ( etc.) { another attempt }. All kinds of complicated merging of multiple tables is described in help but not simply putting new data into a new table within App Designer code (which has to be different than MatLab of course)
And after I get that first row in, I sure hope I can keep adding rows (app.NextTrial is the row index of course) for as long as I have enough memory (maybe 1000 rows?), that I can later export to an excel file or .CSV.
Thanks for the help for an old time C coder new to Matlab.This should be easy… Data comes in from a serial device consisting of a character and a number (time in msec) and I want to insert it into a table on screen.
I’ve got my serial callback working (after much effort) and I thought the next step would be easier. I have created a uitable that is displayed on the screen. Empty at first, called ResultsTable and thus referred to as app.ResultsTable with 2 columns named ‘Event’ and ‘Time’. Everything else about the table is defaulted.
The app.ResultsTable.Data is initially [ ] as expected and as each bit of info comes in I want to add it to the table. Serial callback parsed the input into PType (a character) and PTime (uint32) so why does
app.ResultsTable.Data(app.NextTrial,’Event’) = char(PType);
app.ResultsTable.Data(app.NextTrial,’Time’) = PData;
Give me multiple columns where the number of columns is the ascii value of the character? If PType is ‘A’ I get 64 zeros and then a 65. I’ve tried various combinations of [ PType PData ] ( etc.) { another attempt }. All kinds of complicated merging of multiple tables is described in help but not simply putting new data into a new table within App Designer code (which has to be different than MatLab of course)
And after I get that first row in, I sure hope I can keep adding rows (app.NextTrial is the row index of course) for as long as I have enough memory (maybe 1000 rows?), that I can later export to an excel file or .CSV.
Thanks for the help for an old time C coder new to Matlab. This should be easy… Data comes in from a serial device consisting of a character and a number (time in msec) and I want to insert it into a table on screen.
I’ve got my serial callback working (after much effort) and I thought the next step would be easier. I have created a uitable that is displayed on the screen. Empty at first, called ResultsTable and thus referred to as app.ResultsTable with 2 columns named ‘Event’ and ‘Time’. Everything else about the table is defaulted.
The app.ResultsTable.Data is initially [ ] as expected and as each bit of info comes in I want to add it to the table. Serial callback parsed the input into PType (a character) and PTime (uint32) so why does
app.ResultsTable.Data(app.NextTrial,’Event’) = char(PType);
app.ResultsTable.Data(app.NextTrial,’Time’) = PData;
Give me multiple columns where the number of columns is the ascii value of the character? If PType is ‘A’ I get 64 zeros and then a 65. I’ve tried various combinations of [ PType PData ] ( etc.) { another attempt }. All kinds of complicated merging of multiple tables is described in help but not simply putting new data into a new table within App Designer code (which has to be different than MatLab of course)
And after I get that first row in, I sure hope I can keep adding rows (app.NextTrial is the row index of course) for as long as I have enough memory (maybe 1000 rows?), that I can later export to an excel file or .CSV.
Thanks for the help for an old time C coder new to Matlab. data into table MATLAB Answers — New Questions
How can I hide the black line on the right side of colorbar
Post Content Post Content colorbar, map MATLAB Answers — New Questions
Does Azure provide DDoS protection for its PaaS services?
Hi,
I am working on a project wherein we will deploy Storage Account, KeyVault, ServiceBus, CosmosDB, and SQL DB in our subscription. All these services will be deployed with public access enabled, and we will only add private endpoints for local VNet traffic.
From a security perspective, should I explicitly add DDoS protection to the above-mentioned services, or do they come with built-in DDoS protection?
Example: Would a DDoS attack be able to bring down a Storage Account Blob Service (test.blob.core.windows.net)?
Hi,I am working on a project wherein we will deploy Storage Account, KeyVault, ServiceBus, CosmosDB, and SQL DB in our subscription. All these services will be deployed with public access enabled, and we will only add private endpoints for local VNet traffic.From a security perspective, should I explicitly add DDoS protection to the above-mentioned services, or do they come with built-in DDoS protection?Example: Would a DDoS attack be able to bring down a Storage Account Blob Service (test.blob.core.windows.net)? Read More
2D or 3D from CST to matlab
i work withh pattern function in matlab but i can get the result and only get err i dont know i can use it or not?
i get text from cst like it for 2D
Theta [deg.] Phi [deg.] Abs(Grlz)[dBi ] Abs(Theta)[dBi ] Phase(Theta)[deg.] Abs(Phi )[dBi ] Phase(Phi )[deg.] Ax.Ratio[dB ]
——————————————————————————————————————————————————
-180.000 90.000 -9.255e+00 -1.298e+01 149.214 -1.165e+01 26.420 5.450e+00
-179.900 90.000 -9.239e+00 -1.295e+01 148.947 -1.165e+01 26.368 5.407e+00
-179.800 90.000 -9.224e+00 -1.292e+01 148.681 -1.164e+01 26.315 5.364e+00
-179.700 90.000 -9.208e+00 -1.289e+01 148.418 -1.163e+01 26.263 5.321e+00
.
.
.
179.600 90.000 -9.319e+00 -1.309e+01 150.304 -1.168e+01 26.638 5.627e+00
179.700 90.000 -9.303e+00 -1.306e+01 150.029 -1.168e+01 26.584 5.582e+00
179.800 90.000 -9.287e+00 -1.303e+01 149.755 -1.167e+01 26.530 5.537e+00
179.900 90.000 -9.271e+00 -1.300e+01 149.484 -1.166e+01 26.477 5.493e+00
in above table i only use first three column which means i like to have pattern in constant phi with various theta
in cst i get this pattern and i want get it in matlab
or about 3d
Theta [deg.] Phi [deg.] Abs(Grlz)[dBi ] Abs(Theta)[dBi ] Phase(Theta)[deg.] Abs(Phi )[dBi ] Phase(Phi )[deg.] Ax.Ratio[dB ]
——————————————————————————————————————————————————
-180.000 -90.000 -9.255e+00 -1.298e+01 329.214 -1.165e+01 206.420 5.450e+00
-175.000 -90.000 -1.014e+01 -1.456e+01 345.709 -1.209e+01 209.583 8.372e+00
-170.000 -90.000 -1.106e+01 -1.607e+01 10.515 -1.271e+01 214.066 1.431e+01
.
.
.
170.000 -85.000 -8.273e+00 -1.118e+01 315.069 -1.139e+01 209.010 2.476e+00
175.000 -85.000 -8.594e+00 -1.155e+01 323.022 -1.166e+01 209.504 3.672e+00
.
.
-180.000 -80.000 -9.255e+00 -1.209e+01 338.042 -1.245e+01 214.316 5.450e+00
-175.000 -80.000 -1.012e+01 -1.327e+01 353.629 -1.299e+01 213.416 8.835e+00
-170.000 -80.000 -1.082e+01 -1.409e+01 16.458 -1.358e+01 212.867 1.684e+01
.
.
160.000 90.000 -1.153e+01 -1.477e+01 248.847 -1.431e+01 48.753 1.504e+01
165.000 90.000 -1.162e+01 -1.622e+01 221.795 -1.347e+01 40.323 3.825e+01
170.000 90.000 -1.106e+01 -1.607e+01 190.515 -1.271e+01 34.066 1.431e+01
175.000 90.000 -1.014e+01 -1.456e+01 165.709 -1.209e+01 29.583 8.372e+00
is it posssible to get them from matlab with patten func or other wayi work withh pattern function in matlab but i can get the result and only get err i dont know i can use it or not?
i get text from cst like it for 2D
Theta [deg.] Phi [deg.] Abs(Grlz)[dBi ] Abs(Theta)[dBi ] Phase(Theta)[deg.] Abs(Phi )[dBi ] Phase(Phi )[deg.] Ax.Ratio[dB ]
——————————————————————————————————————————————————
-180.000 90.000 -9.255e+00 -1.298e+01 149.214 -1.165e+01 26.420 5.450e+00
-179.900 90.000 -9.239e+00 -1.295e+01 148.947 -1.165e+01 26.368 5.407e+00
-179.800 90.000 -9.224e+00 -1.292e+01 148.681 -1.164e+01 26.315 5.364e+00
-179.700 90.000 -9.208e+00 -1.289e+01 148.418 -1.163e+01 26.263 5.321e+00
.
.
.
179.600 90.000 -9.319e+00 -1.309e+01 150.304 -1.168e+01 26.638 5.627e+00
179.700 90.000 -9.303e+00 -1.306e+01 150.029 -1.168e+01 26.584 5.582e+00
179.800 90.000 -9.287e+00 -1.303e+01 149.755 -1.167e+01 26.530 5.537e+00
179.900 90.000 -9.271e+00 -1.300e+01 149.484 -1.166e+01 26.477 5.493e+00
in above table i only use first three column which means i like to have pattern in constant phi with various theta
in cst i get this pattern and i want get it in matlab
or about 3d
Theta [deg.] Phi [deg.] Abs(Grlz)[dBi ] Abs(Theta)[dBi ] Phase(Theta)[deg.] Abs(Phi )[dBi ] Phase(Phi )[deg.] Ax.Ratio[dB ]
——————————————————————————————————————————————————
-180.000 -90.000 -9.255e+00 -1.298e+01 329.214 -1.165e+01 206.420 5.450e+00
-175.000 -90.000 -1.014e+01 -1.456e+01 345.709 -1.209e+01 209.583 8.372e+00
-170.000 -90.000 -1.106e+01 -1.607e+01 10.515 -1.271e+01 214.066 1.431e+01
.
.
.
170.000 -85.000 -8.273e+00 -1.118e+01 315.069 -1.139e+01 209.010 2.476e+00
175.000 -85.000 -8.594e+00 -1.155e+01 323.022 -1.166e+01 209.504 3.672e+00
.
.
-180.000 -80.000 -9.255e+00 -1.209e+01 338.042 -1.245e+01 214.316 5.450e+00
-175.000 -80.000 -1.012e+01 -1.327e+01 353.629 -1.299e+01 213.416 8.835e+00
-170.000 -80.000 -1.082e+01 -1.409e+01 16.458 -1.358e+01 212.867 1.684e+01
.
.
160.000 90.000 -1.153e+01 -1.477e+01 248.847 -1.431e+01 48.753 1.504e+01
165.000 90.000 -1.162e+01 -1.622e+01 221.795 -1.347e+01 40.323 3.825e+01
170.000 90.000 -1.106e+01 -1.607e+01 190.515 -1.271e+01 34.066 1.431e+01
175.000 90.000 -1.014e+01 -1.456e+01 165.709 -1.209e+01 29.583 8.372e+00
is it posssible to get them from matlab with patten func or other way i work withh pattern function in matlab but i can get the result and only get err i dont know i can use it or not?
i get text from cst like it for 2D
Theta [deg.] Phi [deg.] Abs(Grlz)[dBi ] Abs(Theta)[dBi ] Phase(Theta)[deg.] Abs(Phi )[dBi ] Phase(Phi )[deg.] Ax.Ratio[dB ]
——————————————————————————————————————————————————
-180.000 90.000 -9.255e+00 -1.298e+01 149.214 -1.165e+01 26.420 5.450e+00
-179.900 90.000 -9.239e+00 -1.295e+01 148.947 -1.165e+01 26.368 5.407e+00
-179.800 90.000 -9.224e+00 -1.292e+01 148.681 -1.164e+01 26.315 5.364e+00
-179.700 90.000 -9.208e+00 -1.289e+01 148.418 -1.163e+01 26.263 5.321e+00
.
.
.
179.600 90.000 -9.319e+00 -1.309e+01 150.304 -1.168e+01 26.638 5.627e+00
179.700 90.000 -9.303e+00 -1.306e+01 150.029 -1.168e+01 26.584 5.582e+00
179.800 90.000 -9.287e+00 -1.303e+01 149.755 -1.167e+01 26.530 5.537e+00
179.900 90.000 -9.271e+00 -1.300e+01 149.484 -1.166e+01 26.477 5.493e+00
in above table i only use first three column which means i like to have pattern in constant phi with various theta
in cst i get this pattern and i want get it in matlab
or about 3d
Theta [deg.] Phi [deg.] Abs(Grlz)[dBi ] Abs(Theta)[dBi ] Phase(Theta)[deg.] Abs(Phi )[dBi ] Phase(Phi )[deg.] Ax.Ratio[dB ]
——————————————————————————————————————————————————
-180.000 -90.000 -9.255e+00 -1.298e+01 329.214 -1.165e+01 206.420 5.450e+00
-175.000 -90.000 -1.014e+01 -1.456e+01 345.709 -1.209e+01 209.583 8.372e+00
-170.000 -90.000 -1.106e+01 -1.607e+01 10.515 -1.271e+01 214.066 1.431e+01
.
.
.
170.000 -85.000 -8.273e+00 -1.118e+01 315.069 -1.139e+01 209.010 2.476e+00
175.000 -85.000 -8.594e+00 -1.155e+01 323.022 -1.166e+01 209.504 3.672e+00
.
.
-180.000 -80.000 -9.255e+00 -1.209e+01 338.042 -1.245e+01 214.316 5.450e+00
-175.000 -80.000 -1.012e+01 -1.327e+01 353.629 -1.299e+01 213.416 8.835e+00
-170.000 -80.000 -1.082e+01 -1.409e+01 16.458 -1.358e+01 212.867 1.684e+01
.
.
160.000 90.000 -1.153e+01 -1.477e+01 248.847 -1.431e+01 48.753 1.504e+01
165.000 90.000 -1.162e+01 -1.622e+01 221.795 -1.347e+01 40.323 3.825e+01
170.000 90.000 -1.106e+01 -1.607e+01 190.515 -1.271e+01 34.066 1.431e+01
175.000 90.000 -1.014e+01 -1.456e+01 165.709 -1.209e+01 29.583 8.372e+00
is it posssible to get them from matlab with patten func or other way pattern, chart, table, antenna MATLAB Answers — New Questions
How Ansys toolbox works?
How ansys toolbox works for making optimization using genetic algorithmHow ansys toolbox works for making optimization using genetic algorithm How ansys toolbox works for making optimization using genetic algorithm ansys, matlab MATLAB Answers — New Questions
Error while installing MATLAB R2021a
While running setup.exe this message appears "Something Unexpected Occurred
There was an error communicating with the backend services". Please provide a way to solve this issue so that i can intall the product.While running setup.exe this message appears "Something Unexpected Occurred
There was an error communicating with the backend services". Please provide a way to solve this issue so that i can intall the product. While running setup.exe this message appears "Something Unexpected Occurred
There was an error communicating with the backend services". Please provide a way to solve this issue so that i can intall the product. error, install MATLAB Answers — New Questions
Tới game bài đổi thưởng, không chỉ là một c
“gây bão” trong thế giới game bài đổi thưởng, không chỉ là một cổng game bài đẳng cấp mà còn là điểm đến của sự đổi mới và sáng tạo. Cổng game Hit Club đẳng cấp nhất năm 2024 với nhiều trò chơi cờ bạc sáng tạo và hấp dẫn. Địa chỉ cá độ này đã được Isle Of Man và đơn vị cá cược PAGCOR cấp giấy chứng nhận. Hitclub – Khám phá thế giới giải trí bất tận. Hitclub100 là một trong những nhà cái uy tín và được yêu thích nhất hiện nay.
”gây bão” trong thế giới game bài đổi thưởng, không chỉ là một cổng game bài đẳng cấp mà còn là điểm đến của sự đổi mới và sáng tạo. Cổng game Hit Club đẳng cấp nhất năm 2024 với nhiều trò chơi cờ bạc sáng tạo và hấp dẫn. Địa chỉ cá độ này đã được Isle Of Man và đơn vị cá cược PAGCOR cấp giấy chứng nhận. Hitclub – Khám phá thế giới giải trí bất tận. Hitclub100 là một trong những nhà cái uy tín và được yêu thích nhất hiện nay. Read More
Azure Static Web Apps Community: Criação de uma App (RAG) com App Spaces e Azure Static Web Apps
No último encontro da Comunidade Azure Static Web Apps através do Canal do Youtube – Microsoft Azure Developers, foi demonstrado como se pode criar uma aplicação de Geração Aumentada por Recuperação (RAG) utilizando o Azure Static Web Apps e o App Spaces.
O evento foi conduzido pelo Dheeraj Bandaru, que é Product Manager do Azure Static Web Apps na Microsoft. Dheeraj contou com a participação do Skyler Hardle, que é Senior Manager do Apps Spaces na Microsoft.
Skyler, apresentou um guia prático sobre a integração entre esses serviços e a implementação de uma aplicação RAG (Retrieval Augmented Generation). A seguir, compartilharei com vocês o que foi abordado durante o evento, detalhando a arquitetura da aplicação e as etapas de desenvolvimento.
Mas, antes precisamos entender esse novo serviço e como ele pode ser útil para a criação de aplicações modernas.
Inclusive, se você deseja assistir ao evento na íntegra, poderá acessar o link abaixo:
O que é o App Spaces?
App Spaces é um serviço inteligente para desenvolvedores que reduz a complexidade de criar e gerenciar aplicações web. Ele ajuda a identificar os serviços corretos para suas aplicações no Azure e proporciona uma experiência de gerenciamento simplificada para o processo de desenvolvimento.
App Spaces também oferece os benefícios de implantar uma aplicação através dos serviços existentes do Azure, como Azure Container Apps e Azure Static Web Apps, com uma experiência focada no desenvolvimento e implantação de forma simplificada e rápida.
Resumindo….
App Spaces é a maneira mais rápida de implantar e gerenciar suas cargas de trabalho de aplicativos inteligentes, sem ser um especialista em nuvem.
O que é Geraçaõ Aumentada por Recuperação (RAG)?
Geração Aumentada por Recuperação (RAG) é uma técnica que combina a recuperação de informações externas com a geração de respostas por modelos de linguagem (LLMs).
Essa abordagem permite enriquecer o contexto dos modelos de IA, proporcionando respostas mais precisas e relevantes. No caso do nosso aplicativo, utilizamos bancos de dados vetoriais para armazenar documentos e embeddings, permitindo uma recuperação eficiente e contextualizada de informações.
Primeiro, alguns conceitos básicos sobre RAG
Os grandes modelos de linguagem (LLMs) como o ChatGPT são treinados com dados públicos disponíveis na internet no momento do treinamento. Eles podem responder a perguntas relacionadas aos dados nos quais foram treinados. No entanto, esses dados públicos podem não ser suficientes para atender a todas as suas necessidades.
Você pode querer respostas baseadas em seus dados privados ou os dados públicos podem simplesmente estar desatualizados. A solução para esse problema é a Geração Aumentada por Recuperação (RAG), um padrão usado em IA que utiliza um LLM para gerar respostas com base em seus próprios dados.
Como o RAG Funciona?
RAG é um padrão que usa seus dados com um LLM para gerar respostas específicas aos seus dados. Quando um usuário faz uma pergunta, o armazenamento de dados é pesquisado com base na entrada do usuário. A pergunta do usuário é então combinada com os resultados correspondentes e enviada ao LLM usando um prompt (instruções explícitas para um modelo de IA ou aprendizado de máquina) para gerar a resposta desejada. Isso pode ser ilustrado da seguinte forma.
A imagem abaixo representa o fluxo de trabalho do RAG:
Se você deseja saber mais sobre o RAG, recomendo a leitura do artigo Geração Aumentada por Recuperação (RAG).
Arquitetura do Aplicativo RAG com App Spaces
No evento, Skyler apresentou a arquitetura do aplicativo RAG que seria desenvolvido durante a apresentação. um frontend em React, um backend em FastAPI e um banco de dados vetorial. Esses componentes trabalham juntos para fornecer uma solução completa e integrada. Abaixo, detalho o funcionamento de cada um desses componentes.
A seguir, detalharei cada um desses componentes.
Frontend com React
O frontend do aplicativo é desenvolvido em React e faz chamadas a um backend FastAPI para buscar e armazenar embeddings em um banco de dados vetorial (Quadrant). A interface do usuário permite inserir perguntas e visualizar as respostas geradas pelo sistema.
Backend com FastAPI
O backend é responsável por duas funcionalidades principais:
Gerar e armazenar embeddings: Utiliza a API de embeddings do OpenAI para gerar vetores a partir do texto fornecido e armazená-los no banco de dados vetorial.
Recuperar e gerar respostas: Busca embeddings relevantes no banco de dados vetorial e utiliza o OpenAI GPT-4 para gerar respostas baseadas nesses embeddings.
Banco de Dados Vetorial
Para a aplicação foi utilizado o Quadrant, um banco de dados vetorial que permite armazenar e recuperar embeddings de forma eficiente. O Quadrant é uma solução escalável e de alto desempenho para aplicações que requerem a recuperação de informações relevantes com base em consultas feitas pelo usuário.
Implementação da Aplicação RAG
Configuração Inicial
Para começar, acesse o App Spaces no portal Azure e selecione a opção para criar um novo ‘space’ de aplicação. Você pode escolher um repositório do GitHub ou utilizar um dos templates fornecidos, como o RAG App. Configure as variáveis de ambiente necessárias, incluindo as chaves da API do OpenAI.
Implantação do Frontend
O frontend da aplicação é uma aplicação React que pode ser implantado no Azure Static Web Apps. Para isso, basta configurar o repositório do GitHub e definir o diretório de saída da aplicação. O Azure Static Web Apps irá criar automaticamente um pipeline de CI/CD para implantar a aplicação.
Configuração e Implantação do Backend
O backend em FastAPI é implantado usando o Azure Container Apps no Azure. Ele manipula as requisições de geração e armazenamento de embeddings, bem como a recuperação e geração de respostas.
Demonstração da Aplicação RAG
Inserindo e Armazenando Texto: O usuário insere um texto no frontend, que é enviado ao backend para gerar e armazenar embeddings no banco de dados vetorial.
Fazendo Perguntas e Recebendo Respostas: O usuário faz perguntas através do frontend, que são processadas pelo backend para buscar embeddings relevantes e gerar respostas utilizando o GPT-4 da OpenAI.
Se desejar saber mais da aplicação desenvolvida no evento, poderá acessar o repositório do GitHub app-spaces-rag-app
Inclusive, Julia Muiruri, que é Developer Advocate na Microsoft, gravou um vídeo sobre a aplicação desenvolvida no evento. Você pode assistir o vídeo abaixo:
Gerenciamento e Extensibilidade
App Spaces facilita a adição de novos componentes a sua aplicação, como novos frontends ou integrações com outros serviços. A interface de gerenciamento permite visualizar logs, métricas e configurar variáveis de ambiente de forma intuitiva.
O mais interessante disso tudo é que independente da linguagem de programação no lado do Backend, você pode utilizar o App Spaces para gerenciar e implantar sua aplicação. Seja você um desenvolvedor Python, .NET, Node.js, Java, Go, etc., o App Spaces é uma excelente opção para gerenciar suas aplicações.
Se desejar ver outros exemplos de aplicações em diferentes linguagens de programação, poderá acessar o repositório do GitHub app-spaces-samples.
E, já recomendo em você começar agora a testar o App Spaces! Você pode começar a testar de forma totalmente gratuita. Acesse agora: AQUI ou clicando na imagem abaixo:
Conclusão
No encontro da comunidade Azure Static Web Apps, aprendemos a criar uma aplicação de Geração Aumentada por Recuperação (RAG) utilizando Azure Static Web Apps e App Spaces. Exploramos a arquitetura da aplicação, configuramos os componentes necessários e implementamos uma solução prática que enriquece o contexto dos modelos de IA, proporcionando respostas mais precisas e relevantes.
Lembrando que você poder rever o evento na íntegra, acessando o link abaixo:
Microsoft Reactor YouTube Channel
Você sabia que temos uma das maiores comunidades com temas diversos sobre tecnologia, nuvem e desenvolvimento de software? Não! Então, você precisa conhecer o Microsoft Reactor.
Além disso conta com inúmeros eventos online, presenciais, workshops, meetups e muito mais. Acesse o link da página oficial do Microsoft Reactor e inscreva-se no canal para ficar por dentro de tudo que acontece na comunidade.
Recursos Adicionais
Gostou do App Spaces? Quer saber mais sobre o serviço e como ele pode ajudar a simplificar o desenvolvimento de aplicações web? Ou melhor, quer aprender através de um tutorial prático como criar uma aplicação com App Spaces?
Deixarei abaixo alguns links que poderão te ajudar a explorar mais sobre o App Spaces e como ele pode ser útil para o desenvolvimento de aplicações modernas.
App Spaces – Documentação Oficial
App Spaces: Building a full-stack app with Google Authentication
Learn About Azure Static Web Apps
Custom authentication in Azure Static Web Apps
Learn more about Azure Container Apps
App Spaces – Try it now!
Quickstart: Deploy your app with App Spaces
Espero que tenha gostado do artigo e que ele tenha sido útil para você. Se tiver alguma dúvida ou sugestão, não hesite em deixar um comentário abaixo.
Até a próxima!
Microsoft Tech Community – Latest Blogs –Read More
Problem in Neural network fitting Matlab R2024a
Hello
I encountered an obstacle in using the Neural Networks window, where after applying NNStart and logging in, I cannot work on the icons at the top of the toolbar, such as training, stopping, training status, etc.
In other words, all icons are inactive.
Please help me resolve this issue.
I am using the trial version with Windows 11
Kind regards.Hello
I encountered an obstacle in using the Neural Networks window, where after applying NNStart and logging in, I cannot work on the icons at the top of the toolbar, such as training, stopping, training status, etc.
In other words, all icons are inactive.
Please help me resolve this issue.
I am using the trial version with Windows 11
Kind regards. Hello
I encountered an obstacle in using the Neural Networks window, where after applying NNStart and logging in, I cannot work on the icons at the top of the toolbar, such as training, stopping, training status, etc.
In other words, all icons are inactive.
Please help me resolve this issue.
I am using the trial version with Windows 11
Kind regards. matlab, nnstart, neural network MATLAB Answers — New Questions
M365 Exchange
Hello
Please i need your help on this issue.
when we try to add an email it gives us error 2002, on mac outlook.
I have tried other email of same domain it works without any issue. This particular domain was in GoDaddy we moved to Azure.
i doubt the autodiscover is going on to wrong server as that email was working on that machine when it was on Godaddy.
Now the same email ID after migration is giving this error. We tried from browser the same email on the same machine its working.
Please its critical how we can resolve this issue.
Hello Please i need your help on this issue. when we try to add an email it gives us error 2002, on mac outlook. I have tried other email of same domain it works without any issue. This particular domain was in GoDaddy we moved to Azure. i doubt the autodiscover is going on to wrong server as that email was working on that machine when it was on Godaddy. Now the same email ID after migration is giving this error. We tried from browser the same email on the same machine its working. Please its critical how we can resolve this issue. Read More
Staff still receiving emails when booked but notification is unticked
Hi,
I have entered a dummy email for one of my staff members. They are still receiving emails as I am getting undeliverable emails in outlook. This is fine as it is a dummy email but I dont want any emails sent to staff. Please help!
Hi, I have entered a dummy email for one of my staff members. They are still receiving emails as I am getting undeliverable emails in outlook. This is fine as it is a dummy email but I dont want any emails sent to staff. Please help! Read More
I need help using the corrcoef function to calculate PRx (pressure reactivity index)
Hi everyone! I need to calculate PRx (pressure reactivity index) using ICP (intracranial pressure) and mean ABP (mean arterial blood pressure) data. PRx is known as "pressure reactivity index is calculated as the degree of statistical correlation between the slow wave components of mean arterial pressure (ABP) and intracranial pressure (ICP)". I need to do this in order to calculate a different hypothetical reactivity index. I have PRx data- so my idea was to use the given PRx data and compare it to the calculated PRx data to ensure it is correct.
This is the script to display the PRx data that was given to me:
%PRx_display
% Load PRx data from MAT file
load(‘PRx,data_part1of1’);
PRx_values = measurement_data;
disp(‘PRx Values:’);
disp(PRx_values);
% Plot PRx values
figure;
plot(PRx_values);
xlabel(‘Time’);
ylabel(‘PRx Value’);
title(‘PRx’);
grid on;
% Calculate average PRx
average_PRx = mean(PRx_values);
% Display average PRx
fprintf(‘Average PRx: %.4f\n’, average_PRx);
This is the script I am trying to calculate PRx with:
%PRx_calc
% Load ICP and MAP data
load("ICP,data_part1of1");
ICP_time_vector = round(time_vector); % Assuming time_vector in ICP file
ICP_data = measurement_data;
load("ABP,mean,data_part1of1");
ABP_time_vector = round(time_vector); % Assuming time_vector in ABP file
ABP_data = measurement_data;
% Remove duplicate time points from ICP
[ICP_time_vector, uniqueIdx] = unique(ICP_time_vector);
ICP_data = ICP_data(uniqueIdx);
% Remove duplicate time points from ABP
[ABP_time_vector, uniqueIdx] = unique(ABP_time_vector);
ABP_data = ABP_data(uniqueIdx);
% Ensure consistent dimensions
if length(ICP_time_vector) ~= length(ICP_data)
error(‘ICP_time_vector and ICP_data have different lengths’);
end
if length(ABP_time_vector) ~= length(ABP_data)
error(‘ABP_time_vector and ABP_data have different lengths’);
end
% Interpolating ABP to match ICP time vector
if ~isequal(ICP_time_vector, ABP_time_vector)
ABP_data = interp1(ABP_time_vector, ABP_data, ICP_time_vector, ‘linear’, ‘extrap’);
end
% Combine ICP data and aligned ABP data
ICP = [ICP_time_vector(:), ICP_data(:)]; % Ensure column vectors
ABP = [ICP_time_vector(:), ABP_data(:)]; % ABP_data is now interpolated to match ICP_time_vector
% Parameters
windowSize = 30 * 10; % 30 windows of 10 seconds
stepSize = 60; % Update every 60 seconds
n = length(ICP_time_vector); % Number of data points
% Preallocate PRx array
PRx = NaN(floor((n – windowSize) / stepSize) + 1, 1);
% Compute moving correlation coefficient
for i = 1:stepSize:(n – windowSize + 1)
% Extract current window of data
windowICP = ICP(i:i + windowSize – 1, 2);
windowABP = ABP(i:i + windowSize – 1, 2);
% Calculate correlation coefficient for the current window
R = corrcoef(windowICP, windowABP);
% Store PRx (correlation coefficient of ICP and ABP)
PRx(floor(i / stepSize) + 1) = R(1, 2);
end
% Calculate average PRx ignoring NaN values
averagePRx = sum(PRx, ‘omitnan’) / sum(~isnan(PRx));
% Display average PRx in the command window
fprintf(‘Average PRx: %.4f\n’, averagePRx);
% Plot PRx vs Time in minutes
figure;
plot((0:length(PRx)-1)*stepSize/60, PRx); % Convert to minutes
title(‘PRx vs Time’);
xlabel(‘Time (minutes)’);
ylabel(‘PRx Values’);
I thought the calculation script would work, but it doesn’t. For instance, for a certain set of data, PRx_calc.m gives me an average PRx value of 0.32, while PRx_display.m gives me 0.52. The trend of the plots look the same, but the PRx_calc.m’s for some reason looks shifted down and distorted a little bit. I am looking for help with the way I am using the corrcoef function and general debugging help.
Here are the first 20 values of each type of data: First 20 values of
ICP: 10 10 10 10 11 11 11 11 10 11 10 11 11 11 11 11 10 11 11 11
First 20 values of
ABP: 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89
First 20 calculated
PRx values: NaN NaN NaN NaN NaN NaN -0.0838 -0.2111 -0.0586 0.1704 0.4276 0.3193 0.3417 0.4128 0.5488 0.4790 0.5207 0.6822 0.7107 0.5235
Average PRx: 0.3209
The PRx_calc script, which produces the above values, should produce the given PRx values(below).
First 20 PRx Values: 0.6150 0.5996 0.6010 0.6276 0.7499 0.4495 0.4488 0.4492 0.5078 0.7263 0.7290 0.7343 0.7490 0.7561 0.6997 0.4609 0.2567 0.5935 0.7317 0.6666
Average PRx: 0.5247
Please let me know if there is anything else I should add, more data points, graphs, etc. Thank you!Hi everyone! I need to calculate PRx (pressure reactivity index) using ICP (intracranial pressure) and mean ABP (mean arterial blood pressure) data. PRx is known as "pressure reactivity index is calculated as the degree of statistical correlation between the slow wave components of mean arterial pressure (ABP) and intracranial pressure (ICP)". I need to do this in order to calculate a different hypothetical reactivity index. I have PRx data- so my idea was to use the given PRx data and compare it to the calculated PRx data to ensure it is correct.
This is the script to display the PRx data that was given to me:
%PRx_display
% Load PRx data from MAT file
load(‘PRx,data_part1of1’);
PRx_values = measurement_data;
disp(‘PRx Values:’);
disp(PRx_values);
% Plot PRx values
figure;
plot(PRx_values);
xlabel(‘Time’);
ylabel(‘PRx Value’);
title(‘PRx’);
grid on;
% Calculate average PRx
average_PRx = mean(PRx_values);
% Display average PRx
fprintf(‘Average PRx: %.4f\n’, average_PRx);
This is the script I am trying to calculate PRx with:
%PRx_calc
% Load ICP and MAP data
load("ICP,data_part1of1");
ICP_time_vector = round(time_vector); % Assuming time_vector in ICP file
ICP_data = measurement_data;
load("ABP,mean,data_part1of1");
ABP_time_vector = round(time_vector); % Assuming time_vector in ABP file
ABP_data = measurement_data;
% Remove duplicate time points from ICP
[ICP_time_vector, uniqueIdx] = unique(ICP_time_vector);
ICP_data = ICP_data(uniqueIdx);
% Remove duplicate time points from ABP
[ABP_time_vector, uniqueIdx] = unique(ABP_time_vector);
ABP_data = ABP_data(uniqueIdx);
% Ensure consistent dimensions
if length(ICP_time_vector) ~= length(ICP_data)
error(‘ICP_time_vector and ICP_data have different lengths’);
end
if length(ABP_time_vector) ~= length(ABP_data)
error(‘ABP_time_vector and ABP_data have different lengths’);
end
% Interpolating ABP to match ICP time vector
if ~isequal(ICP_time_vector, ABP_time_vector)
ABP_data = interp1(ABP_time_vector, ABP_data, ICP_time_vector, ‘linear’, ‘extrap’);
end
% Combine ICP data and aligned ABP data
ICP = [ICP_time_vector(:), ICP_data(:)]; % Ensure column vectors
ABP = [ICP_time_vector(:), ABP_data(:)]; % ABP_data is now interpolated to match ICP_time_vector
% Parameters
windowSize = 30 * 10; % 30 windows of 10 seconds
stepSize = 60; % Update every 60 seconds
n = length(ICP_time_vector); % Number of data points
% Preallocate PRx array
PRx = NaN(floor((n – windowSize) / stepSize) + 1, 1);
% Compute moving correlation coefficient
for i = 1:stepSize:(n – windowSize + 1)
% Extract current window of data
windowICP = ICP(i:i + windowSize – 1, 2);
windowABP = ABP(i:i + windowSize – 1, 2);
% Calculate correlation coefficient for the current window
R = corrcoef(windowICP, windowABP);
% Store PRx (correlation coefficient of ICP and ABP)
PRx(floor(i / stepSize) + 1) = R(1, 2);
end
% Calculate average PRx ignoring NaN values
averagePRx = sum(PRx, ‘omitnan’) / sum(~isnan(PRx));
% Display average PRx in the command window
fprintf(‘Average PRx: %.4f\n’, averagePRx);
% Plot PRx vs Time in minutes
figure;
plot((0:length(PRx)-1)*stepSize/60, PRx); % Convert to minutes
title(‘PRx vs Time’);
xlabel(‘Time (minutes)’);
ylabel(‘PRx Values’);
I thought the calculation script would work, but it doesn’t. For instance, for a certain set of data, PRx_calc.m gives me an average PRx value of 0.32, while PRx_display.m gives me 0.52. The trend of the plots look the same, but the PRx_calc.m’s for some reason looks shifted down and distorted a little bit. I am looking for help with the way I am using the corrcoef function and general debugging help.
Here are the first 20 values of each type of data: First 20 values of
ICP: 10 10 10 10 11 11 11 11 10 11 10 11 11 11 11 11 10 11 11 11
First 20 values of
ABP: 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89
First 20 calculated
PRx values: NaN NaN NaN NaN NaN NaN -0.0838 -0.2111 -0.0586 0.1704 0.4276 0.3193 0.3417 0.4128 0.5488 0.4790 0.5207 0.6822 0.7107 0.5235
Average PRx: 0.3209
The PRx_calc script, which produces the above values, should produce the given PRx values(below).
First 20 PRx Values: 0.6150 0.5996 0.6010 0.6276 0.7499 0.4495 0.4488 0.4492 0.5078 0.7263 0.7290 0.7343 0.7490 0.7561 0.6997 0.4609 0.2567 0.5935 0.7317 0.6666
Average PRx: 0.5247
Please let me know if there is anything else I should add, more data points, graphs, etc. Thank you! Hi everyone! I need to calculate PRx (pressure reactivity index) using ICP (intracranial pressure) and mean ABP (mean arterial blood pressure) data. PRx is known as "pressure reactivity index is calculated as the degree of statistical correlation between the slow wave components of mean arterial pressure (ABP) and intracranial pressure (ICP)". I need to do this in order to calculate a different hypothetical reactivity index. I have PRx data- so my idea was to use the given PRx data and compare it to the calculated PRx data to ensure it is correct.
This is the script to display the PRx data that was given to me:
%PRx_display
% Load PRx data from MAT file
load(‘PRx,data_part1of1’);
PRx_values = measurement_data;
disp(‘PRx Values:’);
disp(PRx_values);
% Plot PRx values
figure;
plot(PRx_values);
xlabel(‘Time’);
ylabel(‘PRx Value’);
title(‘PRx’);
grid on;
% Calculate average PRx
average_PRx = mean(PRx_values);
% Display average PRx
fprintf(‘Average PRx: %.4f\n’, average_PRx);
This is the script I am trying to calculate PRx with:
%PRx_calc
% Load ICP and MAP data
load("ICP,data_part1of1");
ICP_time_vector = round(time_vector); % Assuming time_vector in ICP file
ICP_data = measurement_data;
load("ABP,mean,data_part1of1");
ABP_time_vector = round(time_vector); % Assuming time_vector in ABP file
ABP_data = measurement_data;
% Remove duplicate time points from ICP
[ICP_time_vector, uniqueIdx] = unique(ICP_time_vector);
ICP_data = ICP_data(uniqueIdx);
% Remove duplicate time points from ABP
[ABP_time_vector, uniqueIdx] = unique(ABP_time_vector);
ABP_data = ABP_data(uniqueIdx);
% Ensure consistent dimensions
if length(ICP_time_vector) ~= length(ICP_data)
error(‘ICP_time_vector and ICP_data have different lengths’);
end
if length(ABP_time_vector) ~= length(ABP_data)
error(‘ABP_time_vector and ABP_data have different lengths’);
end
% Interpolating ABP to match ICP time vector
if ~isequal(ICP_time_vector, ABP_time_vector)
ABP_data = interp1(ABP_time_vector, ABP_data, ICP_time_vector, ‘linear’, ‘extrap’);
end
% Combine ICP data and aligned ABP data
ICP = [ICP_time_vector(:), ICP_data(:)]; % Ensure column vectors
ABP = [ICP_time_vector(:), ABP_data(:)]; % ABP_data is now interpolated to match ICP_time_vector
% Parameters
windowSize = 30 * 10; % 30 windows of 10 seconds
stepSize = 60; % Update every 60 seconds
n = length(ICP_time_vector); % Number of data points
% Preallocate PRx array
PRx = NaN(floor((n – windowSize) / stepSize) + 1, 1);
% Compute moving correlation coefficient
for i = 1:stepSize:(n – windowSize + 1)
% Extract current window of data
windowICP = ICP(i:i + windowSize – 1, 2);
windowABP = ABP(i:i + windowSize – 1, 2);
% Calculate correlation coefficient for the current window
R = corrcoef(windowICP, windowABP);
% Store PRx (correlation coefficient of ICP and ABP)
PRx(floor(i / stepSize) + 1) = R(1, 2);
end
% Calculate average PRx ignoring NaN values
averagePRx = sum(PRx, ‘omitnan’) / sum(~isnan(PRx));
% Display average PRx in the command window
fprintf(‘Average PRx: %.4f\n’, averagePRx);
% Plot PRx vs Time in minutes
figure;
plot((0:length(PRx)-1)*stepSize/60, PRx); % Convert to minutes
title(‘PRx vs Time’);
xlabel(‘Time (minutes)’);
ylabel(‘PRx Values’);
I thought the calculation script would work, but it doesn’t. For instance, for a certain set of data, PRx_calc.m gives me an average PRx value of 0.32, while PRx_display.m gives me 0.52. The trend of the plots look the same, but the PRx_calc.m’s for some reason looks shifted down and distorted a little bit. I am looking for help with the way I am using the corrcoef function and general debugging help.
Here are the first 20 values of each type of data: First 20 values of
ICP: 10 10 10 10 11 11 11 11 10 11 10 11 11 11 11 11 10 11 11 11
First 20 values of
ABP: 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89
First 20 calculated
PRx values: NaN NaN NaN NaN NaN NaN -0.0838 -0.2111 -0.0586 0.1704 0.4276 0.3193 0.3417 0.4128 0.5488 0.4790 0.5207 0.6822 0.7107 0.5235
Average PRx: 0.3209
The PRx_calc script, which produces the above values, should produce the given PRx values(below).
First 20 PRx Values: 0.6150 0.5996 0.6010 0.6276 0.7499 0.4495 0.4488 0.4492 0.5078 0.7263 0.7290 0.7343 0.7490 0.7561 0.6997 0.4609 0.2567 0.5935 0.7317 0.6666
Average PRx: 0.5247
Please let me know if there is anything else I should add, more data points, graphs, etc. Thank you! corrcoef MATLAB Answers — New Questions
Notepad corrupting accented letters in text files, showing as boxed question marks
Hello,
I work out of .txt files in Notepad and recently moved from a Windows 10 computer to a new one with Windows 11. Text files I’ve had for years with accented letters are now corrupted. Regardless of what character they were, they display in Notepad as boxed question marks. I didn’t notice until after I saved changes. When I open the same file or copy and paste the text elsewhere, the box carries over as a space. Naturally, I can’t search within the file for the character because it pastes in the field as a space.
These characters existed without issue for years in Notepad throughout previous versions of Windows. Because I’d been copying and pasting text into Notepad and saving, I know that some characters, such as in Japanese, Chinese, and Hungarian languages, were too much for the old Notepad to save without changing the default format, which I never did. I preferred to maintain a universal format for the text file for compatibility.
My language setting is and has always been English. I do not need or want to change it.
Opening the same file changing Encoding from Auto-Detect to ANSI or UTF-8 only changes the boxed question mark to a space. I don’t know how Microsoft could get this so wrong after so many decades.
I believe it’s too late to salvage all my accented characters in texts I’ve saved over, but how do I prevent this other than switching to another application?
Hello, I work out of .txt files in Notepad and recently moved from a Windows 10 computer to a new one with Windows 11. Text files I’ve had for years with accented letters are now corrupted. Regardless of what character they were, they display in Notepad as boxed question marks. I didn’t notice until after I saved changes. When I open the same file or copy and paste the text elsewhere, the box carries over as a space. Naturally, I can’t search within the file for the character because it pastes in the field as a space. These characters existed without issue for years in Notepad throughout previous versions of Windows. Because I’d been copying and pasting text into Notepad and saving, I know that some characters, such as in Japanese, Chinese, and Hungarian languages, were too much for the old Notepad to save without changing the default format, which I never did. I preferred to maintain a universal format for the text file for compatibility. My language setting is and has always been English. I do not need or want to change it. Opening the same file changing Encoding from Auto-Detect to ANSI or UTF-8 only changes the boxed question mark to a space. I don’t know how Microsoft could get this so wrong after so many decades. I believe it’s too late to salvage all my accented characters in texts I’ve saved over, but how do I prevent this other than switching to another application? Read More
Using Conditional Formatting to make a field blank if another field is blank
I have a document library where I would like one column (Reject) to be blank if another column (Reject Reason) is blank. Can I use conditional formatting to do this?
Here is my current JSON on the Reject column:
I have a document library where I would like one column (Reject) to be blank if another column (Reject Reason) is blank. Can I use conditional formatting to do this? Here is my current JSON on the Reject column: Read More
What’s New in Copilot for Sales – July 2024
Microsoft Copilot for Sales is reimagining sales. Integrated seamlessly into your daily tools across Microsoft 365 and Teams, Copilot for Sales harnesses the power of generative AI and customer data to keep sellers in their flow of work so they can spend more time with customers.
This month, we’re excited to bring capabilities to help sellers save time when collaborating with seamless sharing of key email info from Outlook to Teams, enable sellers to stay ahead of activities with meeting prep notes and recent emails, and enable sellers to receive suggested CRM updates in even more languages!
As always, we invite you to get started, learn more, and stay connected! See you next month!
Capabilities highlighted below are included in the July release of Copilot for Sales. It may take time for specific capabilities to reach every tenant in each market.
In Outlook
Share key email information easily from Outlook to Teams
Today, sellers face challenges in efficiently sharing crucial customer information received via Outlook with their sales team members on Teams. Currently, they resort to manual copying and pasting of information, searching for the appropriate recipient, and then initiating a chat or posting in the right channel on Teams to share it.
With this release, we’re introducing seamless sharing to Teams in the seller’s flow of work in Outlook to help sales teams quickly start a Teams discussion with up-to-date and relevant information that can move a deal forward. Now, sellers can:
Share key email information with their colleagues in Teams
Add preamble text before sharing
Review and modify key email info before sharing
Share to any location in Teams ─ with a person, in a group chat, or in a Teams channel
Example of user flow for sharing key email info to Teams using Copilot for Sales
Find more details in our product documentation.
Full language support in suggested CRM updates
Sellers are busy and today updating information crucial for their businesses directly in their CRM requires manual work. Bringing the ability to update their CRM to the flow of work for quick updates, sellers can save time and be more efficient.
This month, we’re excited to announce the rollout of additional language support for suggested CRM updates. Prior to this release, four languages were supported; this expansion enables Copilot for Sales to provide suggested updates in ten languages* for:
Monetary value changes (like budgets, revenue, fees etc.)
Timeline changes
Stage progression changes for an opportunity.
* Discover all the details at our supported languages page.
The fields a seller can update depend on their CRM permissions as well as which editable fields are enabled by the admins. Calculate fields, and all other scenarios will deep link to their CRM.
Screenshot of suggested CRM updates user interface
In Teams
Stay ahead of activities with meeting prep notes and recent emails
Sellers and sales managers preparing for a meeting sift through vast amounts of data from a variety of sources, including their CRM, a time consuming and sometimes overwhelming activity. This can lead to information overload and potentially cause difficulty in prioritizing the most relevant details for their meeting.
We’re pleased to announce two new capabilities in our meeting prep to help both sellers and sales managers stay ahead of their most impactful activities! Starting with our July release:
A meeting prep card will be sent about an hour* before a meeting instead of just as the meeting starts. (admin configuration settings coming soon!)
Recent emails in meeting prep now contain information about the last 2 emails sharing the same external contacts who are participating in the meeting.
*card will appear 45-75 minutes prior to meeting start time
Screenshot of meeting prep info card inside Teams.
Get started
Ready to join us and other top-performing sales organizations worldwide? Reach out to your Microsoft sales team or visit our product web page.
Ready to install Copilot for Sales? Have a look at our deployment guide for Dynamics 365 Sales users or our deployment guide for Salesforce users.
Learn more
Ready for all the details? Check out the Copilot for Sales product documentation.
Ready for the latest tips…and more? Copilot for Sales Tip Time can serve as a foundation for your training of Copilot for Sales users, customers, or partners! This content includes use cases and demonstrates how each feature will benefit sellers, administrators, and sales managers.
Looking for the latest adoption resources? Visit the Copilot for Sales Adoption Center and find the latest information about how to go from inspiration to adoption.
Stay connected
Want to stay connected? Learn about the latest improvements before everyone else at https://aka.ms/salescopilotupdates. Join our community in the community discussion forum and we always welcome your feedback and ideas in our product feedback portal.
Microsoft Tech Community – Latest Blogs –Read More
Word inserting shapes disabled
I use the shapes feature (illustrations tap) inside Word for work to explain the designed layouts for a quick and easy reference for my team. Recently, when I click on a shape, it shows the list of options I can choose from, but when I hover my mouse over my document, the crosshairs that normally appear are not there. It is almost as if something is disabled for this particular feature. All the other illustrations’ features are functioning as normally; it is only the shapes. Furthermore, when I open a document that has shapes from a previous project, I can add more or edit existing shapes in any way. My word is up to date as of today, and really stumped on how to fix this,
Thank you in advance.
I use the shapes feature (illustrations tap) inside Word for work to explain the designed layouts for a quick and easy reference for my team. Recently, when I click on a shape, it shows the list of options I can choose from, but when I hover my mouse over my document, the crosshairs that normally appear are not there. It is almost as if something is disabled for this particular feature. All the other illustrations’ features are functioning as normally; it is only the shapes. Furthermore, when I open a document that has shapes from a previous project, I can add more or edit existing shapes in any way. My word is up to date as of today, and really stumped on how to fix this, Thank you in advance. Read More
Can I deploy a multiwindow app as a web app using MATLAB Web App Server?
This documentation page shows the workflow of creating a multiwindow app with the App Designer.
https://www.mathworks.com/help/matlab/creating_guis/creating-multiwindow-apps-in-app-designer.html
However, after successfully deploying and launching the app from the web app server, I get errors such as:
Web Apps does not support multiwindow apps
Or:
Error using errordlg (line 2)
Web Apps does not support errordlg.
Can I deploy a multiwindow app as a web app using MATLAB Web App Server?This documentation page shows the workflow of creating a multiwindow app with the App Designer.
https://www.mathworks.com/help/matlab/creating_guis/creating-multiwindow-apps-in-app-designer.html
However, after successfully deploying and launching the app from the web app server, I get errors such as:
Web Apps does not support multiwindow apps
Or:
Error using errordlg (line 2)
Web Apps does not support errordlg.
Can I deploy a multiwindow app as a web app using MATLAB Web App Server? This documentation page shows the workflow of creating a multiwindow app with the App Designer.
https://www.mathworks.com/help/matlab/creating_guis/creating-multiwindow-apps-in-app-designer.html
However, after successfully deploying and launching the app from the web app server, I get errors such as:
Web Apps does not support multiwindow apps
Or:
Error using errordlg (line 2)
Web Apps does not support errordlg.
Can I deploy a multiwindow app as a web app using MATLAB Web App Server? multiwindowapp, webapplimitations MATLAB Answers — New Questions
Word is not retaining pictures
When I save a picture from a website or save a document in Word when I try to attach to an email it opens as a text box not a picture. I have tried all I can find and nothing corrects it. I have been able in the past to retrieve the picture but recently it has had this issue.
When I save a picture from a website or save a document in Word when I try to attach to an email it opens as a text box not a picture. I have tried all I can find and nothing corrects it. I have been able in the past to retrieve the picture but recently it has had this issue. Read More
Parse and Create HTML in Azure Logic App
I’m working on the following Array:
I’m working on the following Array:“Jul. 11 2024 11:38 AM, A, B, C” r “Jul. 11 2024 11:38 AM ,A , B, C” r “Jul. 11 2024 11:38 AM ,A, B, C” r“ Jul. 11 2024 11:38 AM,A, B, C” r I need to email that array on the following HTML format. It seems like “Create HTML Table” doesn’t like Array. How can I convert the data above into the table below? DateSenderRecipientSubjectJul. 11 2024 11:38 AMABCJul. 11 2024 11:38 AMABCJul. 11 2024 11:38 AMABC Read More
how to get an Outline group to open downward
The default behavior for the +/- control of an outline group of rows is to be at the bottom of the group. E.g., if you group rows 1 through 5, the +/- is on row 6. When you want to collapse a group, you have to go to the bottom of the group (row 6) to click the minus. I want the +/- on the first row (the top) of the group. So if I’ve grouped rows 1-5, I would click on a control on row 1, not on row 6, and it would open downward.
Is this possible? I think I’ve seen it this way in the past, but I don’t know how to do it.
The default behavior for the +/- control of an outline group of rows is to be at the bottom of the group. E.g., if you group rows 1 through 5, the +/- is on row 6. When you want to collapse a group, you have to go to the bottom of the group (row 6) to click the minus. I want the +/- on the first row (the top) of the group. So if I’ve grouped rows 1-5, I would click on a control on row 1, not on row 6, and it would open downward. Is this possible? I think I’ve seen it this way in the past, but I don’t know how to do it. Read More
