Category: News
Что такое реферальный код OKX?
Вы ищете реферальные коды OKX на 2024 год? С 25 июля 2024 г. используйте пригласительный код OKX [BET888] при регистрации учетной записи, чтобы разблокировать специальные награды в течение года. Вознаграждение до 10 тысяч долларов США. Поделитесь своим реферальным кодом с друзьями и семьей, чтобы получить скидку 50 % на комиссию за торговлю на OKX, безопасной, всемирно известной бирже криптовалют. OKX предоставляет надежную платформу для торговли биткойнами, Ethereum, USDT, EOS и многими другими криптовалютами.
Какой реферальный код OKX лучше всего?
С 25 июля 2024 г. реферальный код OKX — [BET888]. Зарабатывайте до 50% торговой комиссии за каждого успешного реферала, что принесет пользу вам и вашей сети, изучая криптоторговлю на OKX.
Вы ищете реферальные коды OKX на 2024 год? С 25 июля 2024 г. используйте пригласительный код OKX [BET888] при регистрации учетной записи, чтобы разблокировать специальные награды в течение года. Вознаграждение до 10 тысяч долларов США. Поделитесь своим реферальным кодом с друзьями и семьей, чтобы получить скидку 50 % на комиссию за торговлю на OKX, безопасной, всемирно известной бирже криптовалют. OKX предоставляет надежную платформу для торговли биткойнами, Ethereum, USDT, EOS и многими другими криптовалютами.Какой реферальный код OKX лучше всего?С 25 июля 2024 г. реферальный код OKX — [BET888]. Зарабатывайте до 50% торговой комиссии за каждого успешного реферала, что принесет пользу вам и вашей сети, изучая криптоторговлю на OKX. Read More
The simulation time set by reinforcement learning is inconsistent with the training time
The simulation time set by reinforcement learning is inconsistent with the training time。The simulation time set by reinforcement learning is inconsistent with the training time。 The simulation time set by reinforcement learning is inconsistent with the training time。 reinforcement learning MATLAB Answers — New Questions
References to multi-agent reinforcement learning schemes in the reinforcement learning toolbox
Can somebody provide several references on multi-agent reinforcement learning schemes in reinforcement learning toolbox？Can somebody provide several references on multi-agent reinforcement learning schemes in reinforcement learning toolbox？ Can somebody provide several references on multi-agent reinforcement learning schemes in reinforcement learning toolbox？ reinforcement learning, muti-agent MATLAB Answers — New Questions
Problems with finding the right IF formula
Hi, I am trying to get a formula that can give 3 results/returns (Resolved, Pending and blank). There is a Status column where the answer returns and 2 other columns where I compare data to see if they are filled with various names. If the 2 columns contain anything I want it to state “Resolved”. If only 1 out of the 2 columns is filled I want it to state “Pending”. If both columns are empty the cell should remain blank.
Below is the current formula and image of the table I am using but it either gives me resolved if the names appear in either column or both and if both cells are empty it remains blank my problem is to get the “Pending” return if only 1 of the 2 cells are filled.
=IF(OR(COUNTIF(H2:I2,”*”&L4:L7&”*”)),”RESOLVED”,””)
Hi, I am trying to get a formula that can give 3 results/returns (Resolved, Pending and blank). There is a Status column where the answer returns and 2 other columns where I compare data to see if they are filled with various names. If the 2 columns contain anything I want it to state “Resolved”. If only 1 out of the 2 columns is filled I want it to state “Pending”. If both columns are empty the cell should remain blank.Below is the current formula and image of the table I am using but it either gives me resolved if the names appear in either column or both and if both cells are empty it remains blank my problem is to get the “Pending” return if only 1 of the 2 cells are filled. =IF(OR(COUNTIF(H2:I2,”*”&L4:L7&”*”)),”RESOLVED”,””) Read More
Training CNN with custom miniBatchDatastore thows cryptic error
I am trying to train a CNN model for a classification task. The input to the model is a `1x1024x2` frame and I have the following network:
layers =
28×1 Layer array with layers:
1 ‘Input Layer’ Image Input 1×1024×2 images
2 ‘CNN1’ 2-D Convolution 16 1×8 convolutions with stride [1 1] and padding ‘same’
3 ‘BN1’ Batch Normalization Batch normalization
4 ‘ReLU1’ ReLU ReLU
5 ‘MaxPool1’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
6 ‘CNN2’ 2-D Convolution 24 1×8 convolutions with stride [1 1] and padding ‘same’
7 ‘BN2’ Batch Normalization Batch normalization
8 ‘ReLU2’ ReLU ReLU
9 ‘MaxPool2’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
10 ‘CNN3’ 2-D Convolution 32 1×8 convolutions with stride [1 1] and padding ‘same’
11 ‘BN3’ Batch Normalization Batch normalization
12 ‘ReLU3’ ReLU ReLU
13 ‘MaxPool3’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
14 ‘CNN4’ 2-D Convolution 48 1×8 convolutions with stride [1 1] and padding ‘same’
15 ‘BN4’ Batch Normalization Batch normalization
16 ‘ReLU4’ ReLU ReLU
17 ‘MaxPool4’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
18 ‘CNN5’ 2-D Convolution 64 1×8 convolutions with stride [1 1] and padding ‘same’
19 ‘BN5’ Batch Normalization Batch normalization
20 ‘ReLU5’ ReLU ReLU
21 ‘MaxPool5’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
22 ‘CNN6’ 2-D Convolution 96 1×8 convolutions with stride [1 1] and padding ‘same’
23 ‘BN6’ Batch Normalization Batch normalization
24 ‘ReLU6’ ReLU ReLU
25 ‘AP1’ 2-D Average Pooling 1×32 average pooling with stride [1 1] and padding [0 0 0 0]
26 ‘FC1’ Fully Connected 24 fully connected layer
27 ‘SoftMax’ Softmax softmax
28 ‘Output’ Classification Output crossentropyex
I’m using a custom minibatch dataset to train the model. The read funtion returns the following table structure:
i’m using these training options:
% Specify training options
options = trainingOptions(‘sgdm’, …
‘MiniBatchSize’, miniBatchSize, …
‘MaxEpochs’, 10, …
‘Verbose’, true, …
‘Plots’, ‘training-progress’);
% Train the network
net = trainNetwork(mbds, layers, options);
and i get the following error:
Error using trainNetwork
Operands to the logical AND (&&) and OR (||) operators must be convertible to logical scalar values. Use the ANY or ALL functions to reduce operands to logical scalar values.
Caused by:
Operands to the logical AND (&&) and OR (||) operators must be convertible to logical scalar values. Use the ANY or ALL functions to reduce operands to logical scalar values.
I’ve been stuck on this for a while now, and theres no way to inspect the trainNetwork code to properly debug. I’d appreciate your suggestions. Thank you.
Paul Osinowo
Graduate Student
University of StrathclydeI am trying to train a CNN model for a classification task. The input to the model is a `1x1024x2` frame and I have the following network:
layers =
28×1 Layer array with layers:
1 ‘Input Layer’ Image Input 1×1024×2 images
2 ‘CNN1’ 2-D Convolution 16 1×8 convolutions with stride [1 1] and padding ‘same’
3 ‘BN1’ Batch Normalization Batch normalization
4 ‘ReLU1’ ReLU ReLU
5 ‘MaxPool1’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
6 ‘CNN2’ 2-D Convolution 24 1×8 convolutions with stride [1 1] and padding ‘same’
7 ‘BN2’ Batch Normalization Batch normalization
8 ‘ReLU2’ ReLU ReLU
9 ‘MaxPool2’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
10 ‘CNN3’ 2-D Convolution 32 1×8 convolutions with stride [1 1] and padding ‘same’
11 ‘BN3’ Batch Normalization Batch normalization
12 ‘ReLU3’ ReLU ReLU
13 ‘MaxPool3’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
14 ‘CNN4’ 2-D Convolution 48 1×8 convolutions with stride [1 1] and padding ‘same’
15 ‘BN4’ Batch Normalization Batch normalization
16 ‘ReLU4’ ReLU ReLU
17 ‘MaxPool4’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
18 ‘CNN5’ 2-D Convolution 64 1×8 convolutions with stride [1 1] and padding ‘same’
19 ‘BN5’ Batch Normalization Batch normalization
20 ‘ReLU5’ ReLU ReLU
21 ‘MaxPool5’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
22 ‘CNN6’ 2-D Convolution 96 1×8 convolutions with stride [1 1] and padding ‘same’
23 ‘BN6’ Batch Normalization Batch normalization
24 ‘ReLU6’ ReLU ReLU
25 ‘AP1’ 2-D Average Pooling 1×32 average pooling with stride [1 1] and padding [0 0 0 0]
26 ‘FC1’ Fully Connected 24 fully connected layer
27 ‘SoftMax’ Softmax softmax
28 ‘Output’ Classification Output crossentropyex
I’m using a custom minibatch dataset to train the model. The read funtion returns the following table structure:
i’m using these training options:
% Specify training options
options = trainingOptions(‘sgdm’, …
‘MiniBatchSize’, miniBatchSize, …
‘MaxEpochs’, 10, …
‘Verbose’, true, …
‘Plots’, ‘training-progress’);
% Train the network
net = trainNetwork(mbds, layers, options);
and i get the following error:
Error using trainNetwork
Operands to the logical AND (&&) and OR (||) operators must be convertible to logical scalar values. Use the ANY or ALL functions to reduce operands to logical scalar values.
Caused by:
Operands to the logical AND (&&) and OR (||) operators must be convertible to logical scalar values. Use the ANY or ALL functions to reduce operands to logical scalar values.
I’ve been stuck on this for a while now, and theres no way to inspect the trainNetwork code to properly debug. I’d appreciate your suggestions. Thank you.
Paul Osinowo
Graduate Student
University of Strathclyde I am trying to train a CNN model for a classification task. The input to the model is a `1x1024x2` frame and I have the following network:
layers =
28×1 Layer array with layers:
1 ‘Input Layer’ Image Input 1×1024×2 images
2 ‘CNN1’ 2-D Convolution 16 1×8 convolutions with stride [1 1] and padding ‘same’
3 ‘BN1’ Batch Normalization Batch normalization
4 ‘ReLU1’ ReLU ReLU
5 ‘MaxPool1’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
6 ‘CNN2’ 2-D Convolution 24 1×8 convolutions with stride [1 1] and padding ‘same’
7 ‘BN2’ Batch Normalization Batch normalization
8 ‘ReLU2’ ReLU ReLU
9 ‘MaxPool2’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
10 ‘CNN3’ 2-D Convolution 32 1×8 convolutions with stride [1 1] and padding ‘same’
11 ‘BN3’ Batch Normalization Batch normalization
12 ‘ReLU3’ ReLU ReLU
13 ‘MaxPool3’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
14 ‘CNN4’ 2-D Convolution 48 1×8 convolutions with stride [1 1] and padding ‘same’
15 ‘BN4’ Batch Normalization Batch normalization
16 ‘ReLU4’ ReLU ReLU
17 ‘MaxPool4’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
18 ‘CNN5’ 2-D Convolution 64 1×8 convolutions with stride [1 1] and padding ‘same’
19 ‘BN5’ Batch Normalization Batch normalization
20 ‘ReLU5’ ReLU ReLU
21 ‘MaxPool5’ 2-D Max Pooling 1×2 max pooling with stride [1 2] and padding [0 0 0 0]
22 ‘CNN6’ 2-D Convolution 96 1×8 convolutions with stride [1 1] and padding ‘same’
23 ‘BN6’ Batch Normalization Batch normalization
24 ‘ReLU6’ ReLU ReLU
25 ‘AP1’ 2-D Average Pooling 1×32 average pooling with stride [1 1] and padding [0 0 0 0]
26 ‘FC1’ Fully Connected 24 fully connected layer
27 ‘SoftMax’ Softmax softmax
28 ‘Output’ Classification Output crossentropyex
I’m using a custom minibatch dataset to train the model. The read funtion returns the following table structure:
i’m using these training options:
% Specify training options
options = trainingOptions(‘sgdm’, …
‘MiniBatchSize’, miniBatchSize, …
‘MaxEpochs’, 10, …
‘Verbose’, true, …
‘Plots’, ‘training-progress’);
% Train the network
net = trainNetwork(mbds, layers, options);
and i get the following error:
Error using trainNetwork
Operands to the logical AND (&&) and OR (||) operators must be convertible to logical scalar values. Use the ANY or ALL functions to reduce operands to logical scalar values.
Caused by:
Operands to the logical AND (&&) and OR (||) operators must be convertible to logical scalar values. Use the ANY or ALL functions to reduce operands to logical scalar values.
I’ve been stuck on this for a while now, and theres no way to inspect the trainNetwork code to properly debug. I’d appreciate your suggestions. Thank you.
Paul Osinowo
Graduate Student
University of Strathclyde deep learning, cnn MATLAB Answers — New Questions
Adding a column to a UITable and then using it.
After a few hours of trying I finally was able to add a column to a UITable
A = zeros([1 size(app.StimInputTable.Data,1)]);
app.StimInputTable.Data.Var4 = A’; % Have to make A a column vector!
for ii = 1:size(app.StimInputTable.Data,1)
app.StimInputTable.Var4(ii) = …
app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii);
But now…
assigning a value to Our new column Var4 gives me
Unrecognized method, property, or field ‘Var4’ for class ‘matlab.ui.control.Table’.
It know what app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii);
is so now put it in Var4! How hard can that be?
K>> app.StimInputTable.Data
ans =
4×4 table
Var1 Var2 Var3 Var4
____ ____ ____ ____
4 5 0 0
5 4 1 0
2 3 2 0
3 2 5 0
I can do it 1 row at a time from theCommand window:
K>> app.StimInputTable.Data
ii = 1 (etc)
K>> app.StimInputTable.Data.Var4(ii) = app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii)
Although the "answer" I get is my whole
app =
MouseOdor4 with properties:
MouseOdor: [1×1 Figure]
all the properties of the whole app I won’t bore you with
K>> app.StimInputTable.Data
ans =
4×4 table
Var1 Var2 Var3 Var4
____ ____ ____ _______
4 5 0 1
5 4 1 2
2 3 2 0.66667
3 2 5 2.5
Look it worked!
Next step if you don’t mind anwering is to sort the table by the Var4 columnAfter a few hours of trying I finally was able to add a column to a UITable
A = zeros([1 size(app.StimInputTable.Data,1)]);
app.StimInputTable.Data.Var4 = A’; % Have to make A a column vector!
for ii = 1:size(app.StimInputTable.Data,1)
app.StimInputTable.Var4(ii) = …
app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii);
But now…
assigning a value to Our new column Var4 gives me
Unrecognized method, property, or field ‘Var4’ for class ‘matlab.ui.control.Table’.
It know what app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii);
is so now put it in Var4! How hard can that be?
K>> app.StimInputTable.Data
ans =
4×4 table
Var1 Var2 Var3 Var4
____ ____ ____ ____
4 5 0 0
5 4 1 0
2 3 2 0
3 2 5 0
I can do it 1 row at a time from theCommand window:
K>> app.StimInputTable.Data
ii = 1 (etc)
K>> app.StimInputTable.Data.Var4(ii) = app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii)
Although the "answer" I get is my whole
app =
MouseOdor4 with properties:
MouseOdor: [1×1 Figure]
all the properties of the whole app I won’t bore you with
K>> app.StimInputTable.Data
ans =
4×4 table
Var1 Var2 Var3 Var4
____ ____ ____ _______
4 5 0 1
5 4 1 2
2 3 2 0.66667
3 2 5 2.5
Look it worked!
Next step if you don’t mind anwering is to sort the table by the Var4 column After a few hours of trying I finally was able to add a column to a UITable
A = zeros([1 size(app.StimInputTable.Data,1)]);
app.StimInputTable.Data.Var4 = A’; % Have to make A a column vector!
for ii = 1:size(app.StimInputTable.Data,1)
app.StimInputTable.Var4(ii) = …
app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii);
But now…
assigning a value to Our new column Var4 gives me
Unrecognized method, property, or field ‘Var4’ for class ‘matlab.ui.control.Table’.
It know what app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii);
is so now put it in Var4! How hard can that be?
K>> app.StimInputTable.Data
ans =
4×4 table
Var1 Var2 Var3 Var4
____ ____ ____ ____
4 5 0 0
5 4 1 0
2 3 2 0
3 2 5 0
I can do it 1 row at a time from theCommand window:
K>> app.StimInputTable.Data
ii = 1 (etc)
K>> app.StimInputTable.Data.Var4(ii) = app.StimInputTable.Data.Var3(ii)/app.StimInputTable.Data.Var2(ii)
Although the "answer" I get is my whole
app =
MouseOdor4 with properties:
MouseOdor: [1×1 Figure]
all the properties of the whole app I won’t bore you with
K>> app.StimInputTable.Data
ans =
4×4 table
Var1 Var2 Var3 Var4
____ ____ ____ _______
4 5 0 1
5 4 1 2
2 3 2 0.66667
3 2 5 2.5
Look it worked!
Next step if you don’t mind anwering is to sort the table by the Var4 column add column to table MATLAB Answers — New Questions
Where to find the coordinates info of image labelar’s bounding boxes?
How can I check the coornates info of the image labeler below?How can I check the coornates info of the image labeler below? How can I check the coornates info of the image labeler below? matlab, machine learning, image labeler MATLAB Answers — New Questions
How to stop this annoying thing?
I am using a web-based Outlook client. When I am composing the mail in browser, this thing always pops up and blocks my writing:
How to stop this annoying thing completely?
I am using a web-based Outlook client. When I am composing the mail in browser, this thing always pops up and blocks my writing: How to stop this annoying thing completely? Read More
Is the error initializing Java Preferences Failed in matlabrc important?
I’m a student and tried downloading a pirated version of matlab, which obviously didn’t work. I then removed that program from my computer, and downloaded the trial version of matlab. However, when I load up matlab, the above error appears.
Wondering what will be affected by it, and how can I get rid of that error.I’m a student and tried downloading a pirated version of matlab, which obviously didn’t work. I then removed that program from my computer, and downloaded the trial version of matlab. However, when I load up matlab, the above error appears.
Wondering what will be affected by it, and how can I get rid of that error. I’m a student and tried downloading a pirated version of matlab, which obviously didn’t work. I then removed that program from my computer, and downloaded the trial version of matlab. However, when I load up matlab, the above error appears.
Wondering what will be affected by it, and how can I get rid of that error. error, java, preferences, startup, library MATLAB Answers — New Questions
How can I plot the following data? Do I have to convert it first to another form?
Hey All,
I’m trying to plot various graphs of the following data but I have no clue where to start. I’ve tried something like the following type of code.
x=zeros(1,10);
x(2:4) =1;
y= linspace(0,10,10);
plot(y,x)
But also tried:
plot(filledData(:,1,filledData(:,2))
I apologize if this is too much, complete beginner. Second day at it.
Thank you all,
JJHey All,
I’m trying to plot various graphs of the following data but I have no clue where to start. I’ve tried something like the following type of code.
x=zeros(1,10);
x(2:4) =1;
y= linspace(0,10,10);
plot(y,x)
But also tried:
plot(filledData(:,1,filledData(:,2))
I apologize if this is too much, complete beginner. Second day at it.
Thank you all,
JJ Hey All,
I’m trying to plot various graphs of the following data but I have no clue where to start. I’ve tried something like the following type of code.
x=zeros(1,10);
x(2:4) =1;
y= linspace(0,10,10);
plot(y,x)
But also tried:
plot(filledData(:,1,filledData(:,2))
I apologize if this is too much, complete beginner. Second day at it.
Thank you all,
JJ double, data, plot, plotting MATLAB Answers — New Questions
Screen shots in Windows 11
Hi,
Is there a known issue in Windows 11 where if you take a screen shot (WIN+SHIFT+S) and then paste it (CTRL+V) in to Teams or Notepad or Paint (anywhere) it keeps pasting the previous thing that you copied? (either text or a screen shot)
To get it to paste the screen shot of text you just grabbed, you sometimes have to do CTRL+V/CTRL+Z/CTRL+V/CTRL+Z/CTRL+V/CTRL+Z then finally CTRL+V and it works. (3 times basically) to actually get it to add the correct screen grab or copied item.
This has been happening for a while now (approx 3 months and running latest version of W11) and driving me nuts trying to figure out what is causing the issue. This is also happening to a lot of other people in our organisation, so any suggestions would be very welcome
Hi, Is there a known issue in Windows 11 where if you take a screen shot (WIN+SHIFT+S) and then paste it (CTRL+V) in to Teams or Notepad or Paint (anywhere) it keeps pasting the previous thing that you copied? (either text or a screen shot) To get it to paste the screen shot of text you just grabbed, you sometimes have to do CTRL+V/CTRL+Z/CTRL+V/CTRL+Z/CTRL+V/CTRL+Z then finally CTRL+V and it works. (3 times basically) to actually get it to add the correct screen grab or copied item. This has been happening for a while now (approx 3 months and running latest version of W11) and driving me nuts trying to figure out what is causing the issue. This is also happening to a lot of other people in our organisation, so any suggestions would be very welcome Read More
Usage of Teams after licence removal
Hi there,
as Staff offboards from M365, we want to give them the possibility to keep their Teams Environment, as they continue to volunteer in the org.
Right now, I can invite someone to teams as a guest and they can use it, without any licences. That is, what I want to achieve for the former staff members.
Is it enough to remove the licence, or will their Teams data be deleted within 30 days as well
Step 6 – Remove and delete the Microsoft 365 license from a former employee – Microsoft 365 admin | Microsoft Learn
When you remove the license, all that user’s data is held for 30 days. You can access the data, or restore the account if the user comes back. After 30 days, all the user’s data (except for documents stored on SharePoint Online) is permanently deleted from Microsoft 365 and can’t be recovered.
Or do we also need to change the usertype from member to guest in the EntraID Userobject?
Still, will this be enough, or will the data be removed anyways?
The convert to an external User won’t do it, as I read, there will be a clean Teams environment/account and the former data is gone.
Any help for clarification is much appreciated
Michael
Hi there, as Staff offboards from M365, we want to give them the possibility to keep their Teams Environment, as they continue to volunteer in the org. Right now, I can invite someone to teams as a guest and they can use it, without any licences. That is, what I want to achieve for the former staff members. Is it enough to remove the licence, or will their Teams data be deleted within 30 days as wellStep 6 – Remove and delete the Microsoft 365 license from a former employee – Microsoft 365 admin | Microsoft Learn When you remove the license, all that user’s data is held for 30 days. You can access the data, or restore the account if the user comes back. After 30 days, all the user’s data (except for documents stored on SharePoint Online) is permanently deleted from Microsoft 365 and can’t be recovered. Or do we also need to change the usertype from member to guest in the EntraID Userobject?Still, will this be enough, or will the data be removed anyways?The convert to an external User won’t do it, as I read, there will be a clean Teams environment/account and the former data is gone. Any help for clarification is much appreciatedMichael Read More
Am I able view all the emails sent to a distribution list
Hi,
We had a distribution list setup where external people can emails to our company. Like distribution list work – the members of that distribution list (within our company) were getting those emails.
I was wondering if there is a I can look at all the emails received at that distribution list?
I realize one of the ways would be to to search on one of the members email box with emails sent to that distribution list. But I was wondering if there are any other built in easier method
Hi, We had a distribution list setup where external people can emails to our company. Like distribution list work – the members of that distribution list (within our company) were getting those emails. I was wondering if there is a I can look at all the emails received at that distribution list? I realize one of the ways would be to to search on one of the members email box with emails sent to that distribution list. But I was wondering if there are any other built in easier method Read More
Archiving Plans
Hi Everyone,
How are you currently archiving Plans in the new Planner? One method we are experimenting with is to create a Teams channel for each project, creating the plan in this channel and archiving the channel when done.
How are you all managing old projects/plans?
Thanks
Hi Everyone, How are you currently archiving Plans in the new Planner? One method we are experimenting with is to create a Teams channel for each project, creating the plan in this channel and archiving the channel when done. How are you all managing old projects/plans? Thanks Read More
XLOOKUP for multiple lookup ranges
Hello,
I’m trying to populate an interactive calendar with dates that a team member will be working. I have been using the XLOOKUP function to do this and can get it working for a single date. Ideally this needs to be a variable date range as I dont want to have to manually input a new formula into the calendar each time. Can XLOOKUP search multiple ranges? I.e searching to see if the date on the calendar matches either cell $B3:$B4 &:$D3:$D4 and then populating the calendar with the persons name?
current formula is as follows : =XLOOKUP(D8,Sheet1!B3:B23,Sheet1!E3:E23)
Screenshots attached.
Hello, I’m trying to populate an interactive calendar with dates that a team member will be working. I have been using the XLOOKUP function to do this and can get it working for a single date. Ideally this needs to be a variable date range as I dont want to have to manually input a new formula into the calendar each time. Can XLOOKUP search multiple ranges? I.e searching to see if the date on the calendar matches either cell $B3:$B4 &:$D3:$D4 and then populating the calendar with the persons name? current formula is as follows : =XLOOKUP(D8,Sheet1!B3:B23,Sheet1!E3:E23) Screenshots attached. Read More
Automate transpose every 5 rows into 5 columns
Hello,
I want to transpose every 5 rows into 5 columns
From this :
into this :
Is there any way to do it in one go ?
Thank you!
Hello, I want to transpose every 5 rows into 5 columns From this : into this : Is there any way to do it in one go ? Thank you! Read More
Unable to book an exam
Hello together,
I noticed that if anyone is clicking on “book appointment via person-vue a blank page appears:
Buchung über Pearson Vue | Microsoft Learn
my colleagues have the same problem for all exams. I wasnt able to find a support or contact page because they dont work as well.
Hello together,I noticed that if anyone is clicking on “book appointment via person-vue a blank page appears: Buchung über Pearson Vue | Microsoft Learn my colleagues have the same problem for all exams. I wasnt able to find a support or contact page because they dont work as well. Read More
MATLAB app designer, how to update value of a property in declared callback function
Hello all,
I am rather new to MATLAB, and therefore a little unfamiliar with the app designer, apologies in advance.
I am trying to write a code that tracks the position of a stepper motor over serial communication. Currently, I have the setup such that it will callback the readSerialData Function everytime the terminator "CR" is reached.
Ideally I would like to access the value read. I wanted to save this value to the motorPos property of the app for use in separate functions later down the line. However, from tests, it seems that the value of app.motorPos does not update and remains the initial value of 0, as defined in the startup function. While it does display the correct value in the command window (from the disp(app.arduino) function), the value of the property app.arduino seem to remain 0, when called upon in later functions.
How should I go about updating the value of property motorPos?
Thanks,
Yuandi Wu
properties (Access = public)
arduino
motorPos
end
methods (Access = private)
function readSerialData(app,src)
app.motorPos = readline(src);
disp(app.motorPos);
end
end
% Callbacks that handle component events
methods (Access = private)
% Code that executes after component creation
function startupFcn(app)
delete(instrfindall);
app.arduino = serialport ("COM3", 9600, "Timeout", 0.1);
app.arduino.DataBits = 8;
configureTerminator(app.arduino,"CR")
configureCallback(app.arduino,"terminator",@readSerialData)
%initially, upon startup, display these values
app.motorPos = ‘0’;
disp(app.motorPos)
endHello all,
I am rather new to MATLAB, and therefore a little unfamiliar with the app designer, apologies in advance.
I am trying to write a code that tracks the position of a stepper motor over serial communication. Currently, I have the setup such that it will callback the readSerialData Function everytime the terminator "CR" is reached.
Ideally I would like to access the value read. I wanted to save this value to the motorPos property of the app for use in separate functions later down the line. However, from tests, it seems that the value of app.motorPos does not update and remains the initial value of 0, as defined in the startup function. While it does display the correct value in the command window (from the disp(app.arduino) function), the value of the property app.arduino seem to remain 0, when called upon in later functions.
How should I go about updating the value of property motorPos?
Thanks,
Yuandi Wu
properties (Access = public)
arduino
motorPos
end
methods (Access = private)
function readSerialData(app,src)
app.motorPos = readline(src);
disp(app.motorPos);
end
end
% Callbacks that handle component events
methods (Access = private)
% Code that executes after component creation
function startupFcn(app)
delete(instrfindall);
app.arduino = serialport ("COM3", 9600, "Timeout", 0.1);
app.arduino.DataBits = 8;
configureTerminator(app.arduino,"CR")
configureCallback(app.arduino,"terminator",@readSerialData)
%initially, upon startup, display these values
app.motorPos = ‘0’;
disp(app.motorPos)
end Hello all,
I am rather new to MATLAB, and therefore a little unfamiliar with the app designer, apologies in advance.
I am trying to write a code that tracks the position of a stepper motor over serial communication. Currently, I have the setup such that it will callback the readSerialData Function everytime the terminator "CR" is reached.
Ideally I would like to access the value read. I wanted to save this value to the motorPos property of the app for use in separate functions later down the line. However, from tests, it seems that the value of app.motorPos does not update and remains the initial value of 0, as defined in the startup function. While it does display the correct value in the command window (from the disp(app.arduino) function), the value of the property app.arduino seem to remain 0, when called upon in later functions.
How should I go about updating the value of property motorPos?
Thanks,
Yuandi Wu
properties (Access = public)
arduino
motorPos
end
methods (Access = private)
function readSerialData(app,src)
app.motorPos = readline(src);
disp(app.motorPos);
end
end
% Callbacks that handle component events
methods (Access = private)
% Code that executes after component creation
function startupFcn(app)
delete(instrfindall);
app.arduino = serialport ("COM3", 9600, "Timeout", 0.1);
app.arduino.DataBits = 8;
configureTerminator(app.arduino,"CR")
configureCallback(app.arduino,"terminator",@readSerialData)
%initially, upon startup, display these values
app.motorPos = ‘0’;
disp(app.motorPos)
end appdesigner, serial MATLAB Answers — New Questions
Some of my contacts are not appearing in my Address Book
I have about 400 Gmail contacts that I want to export to Outlook 365 (Win 10). I’ve exported the .CSV from Gmail and ran the import OK. Annoyingly, some entries in Contacts are not showing up in the Address Book. I’ve tried creating a second Contacts folder and copied all contacts from the first folder, ticking the box which says it can be accessed from Address Book, but it makes no difference. What am I doing wrong?
I have about 400 Gmail contacts that I want to export to Outlook 365 (Win 10). I’ve exported the .CSV from Gmail and ran the import OK. Annoyingly, some entries in Contacts are not showing up in the Address Book. I’ve tried creating a second Contacts folder and copied all contacts from the first folder, ticking the box which says it can be accessed from Address Book, but it makes no difference. What am I doing wrong? Read More
Can you share any best practices for cost optimization in Azure?
Azure offers a vast array of cloud services, but managing those services can lead to unexpected costs. The good news is that there are well-defined practices you can implement to optimize your Azure spending and ensure you’re getting the most value. Here’s a breakdown of key strategies to consider:
Eliminate Waste: Shut Down Unused Resources
Azure resources like virtual machines (VMs) that are left idle continue to accrue charges. Utilize Azure Advisor, a built-in service, to identify inactive resources and power them down when not in use.
Rightsize Underutilized Resources
Not all resources require top-of-the-line specifications. Analyze your VM usage with Azure Advisor’s recommendations. You can often scale down to a smaller VM size and save on costs without impacting performance.
Leverage Committed Use Discounts
Azure offers significant savings for predictable workloads through Reserved Instances and Savings Plans. With these options, you prepay for a certain level of compute resources for a set term (one or three years) at a discounted rate compared to pay-as-you-go pricing.
Optimize Storage Costs
Azure Storage provides various tiers – hot, cool, and archive – suited for different data access frequencies. Hot storage is ideal for frequently accessed data, while cool and archive tiers are more cost-effective for less frequently used information.
Embrace Automation for Cost Management
Setting up automated rules can streamline cost optimization. Azure allows you to configure alerts for exceeding spending thresholds and automate VM shutdowns during non-working hours.
Cultivate a Culture of Cost Awareness
Educate your team on cost-saving practices. Encourage responsible resource allocation and promote shutting down unused resources.
Monitor and Refine Continuously
Cloud environments are dynamic. Regularly assess your resource usage and costs. Azure Cost Management tools offer detailed insights to help you identify areas for further optimization.
By implementing these best practices, you can significantly reduce your Azure expenses without compromising performance. Remember, cost optimization is an ongoing process. As your cloud usage evolves, stay vigilant and adapt your strategies to maintain an efficient and cost-effective Azure environment.
Azure offers a vast array of cloud services, but managing those services can lead to unexpected costs. The good news is that there are well-defined practices you can implement to optimize your Azure spending and ensure you’re getting the most value. Here’s a breakdown of key strategies to consider:Eliminate Waste: Shut Down Unused ResourcesAzure resources like virtual machines (VMs) that are left idle continue to accrue charges. Utilize Azure Advisor, a built-in service, to identify inactive resources and power them down when not in use.Rightsize Underutilized ResourcesNot all resources require top-of-the-line specifications. Analyze your VM usage with Azure Advisor’s recommendations. You can often scale down to a smaller VM size and save on costs without impacting performance.Leverage Committed Use DiscountsAzure offers significant savings for predictable workloads through Reserved Instances and Savings Plans. With these options, you prepay for a certain level of compute resources for a set term (one or three years) at a discounted rate compared to pay-as-you-go pricing.Optimize Storage CostsAzure Storage provides various tiers – hot, cool, and archive – suited for different data access frequencies. Hot storage is ideal for frequently accessed data, while cool and archive tiers are more cost-effective for less frequently used information.Embrace Automation for Cost ManagementSetting up automated rules can streamline cost optimization. Azure allows you to configure alerts for exceeding spending thresholds and automate VM shutdowns during non-working hours.Cultivate a Culture of Cost AwarenessEducate your team on cost-saving practices. Encourage responsible resource allocation and promote shutting down unused resources.Monitor and Refine ContinuouslyCloud environments are dynamic. Regularly assess your resource usage and costs. Azure Cost Management tools offer detailed insights to help you identify areas for further optimization.By implementing these best practices, you can significantly reduce your Azure expenses without compromising performance. Remember, cost optimization is an ongoing process. As your cloud usage evolves, stay vigilant and adapt your strategies to maintain an efficient and cost-effective Azure environment. Read More
