Category: News
Public Preview: Customer Managed Planned Failover for Azure Storage
Azure Storage is excited to announce customer managed Planned Failover for Azure Storage is now available in public preview.
Over the past few years Azure Storage has offered customer managed (unplanned) failover as a disaster recovery solution for geo-redundant storage accounts. This has enabled our users to meet their business requirements for disaster recovery testing and compliance. Planned failover now provides the same benefits while introducing additional benefits to our storage users.
Planned Failover provides the ability to swap your geo primary and secondary region while the storage service endpoints are still healthy. As a result, a user can now failover their storage account while keeping geo-redundancy and with no data loss or additional cost. Users will no longer need to reconfigure geo-redundant storage (GRS) after their planned failover operation which will save them both time and cost. Once the planned failover operation is completed all new writes will be made to your original secondary region, which will now be your primary region.
There are multiple scenarios where Planned Failover can be utilized including:
Planned disaster recovery testing drills to validate business continuity and disaster recovery.
Recovering from a partial outage that occurs in the primary region where storage is not impacted. For example, if your storage service endpoints are healthy in both regions, but another Microsoft or 3rd party service is facing an outage in the primary region you can failover your storage services. In this scenario, once you failover the storage account and all other services your workloads can continue to work.
A proactive solution in preparation of large-scale disasters that may impact a region. To prepare for a disaster such as a hurricane, users can leverage Planned Failover to failover to their secondary region then failback once things are resolved.
Planned failover supports Blob, ADLS Gen2, Table, File and Queue data.
Key differences between our customer managed (unplanned) failover and planned failover are highlighted below:
Unplanned Failover
Planned Failover
After an unplanned failover is completed the storage account is converted to Locally Redundant Storage (LRS) and the secondary region becomes the new primary region.
After a planned failover is completed the storage account remains Geo Redundant Storage (GRS). The secondary region becomes the new primary region, and the primary region becomes the new secondary region.
Once an unplanned failover is initiated the operation begins immediately. Writes that were pending replication to the secondary region (made after the Last Sync Time) will potentially be lost. Users can utilize their Last Sync Time to determine the recovery point of their storage account.
Once a planned failover is initiated the first step is replicating pending writes (writes made after the Last Sync Time) to the secondary region. As a result, the Last Sync Time is caught up before the and there should be no data loss.
Primary use case: a storage related outage in the primary region.
Primary use case: to test the Failover workflow or a non-storage related outage in the primary region.
An unplanned failover can be used when the primary storage endpoints are unavailable (there is a storage related outage on the primary region).
A planned failover works while the primary and secondary storage endpoints are available.
Regions Planned Failover currently supports
Southeast Asia
East Asia
West Europe
France Central
East US 2
Central US
UK South
Australia East
Switzerland North
Switzerland West
India Central
India West
To learn more about Planned Failover and to track the expansion of the preview into additional regions see, How customer managed planned failover works
Getting started
Getting started is simple, to learn more about the step-by-step process to initiate a planned failover review, Initiate account failover
Feedback
If you have questions or feedback, do not hesitate to reach out at storagefailover@service.microsoft.com
Microsoft Tech Community – Latest Blogs –Read More
Sales & Pre-sales Enablement for Partners OnDemand webinars
Gain insights on how to go to market faster and engage customers more effectively with this on-demand webinar! You will learn the benefits of combining Through Partner Marketing resources with Generative AI tools like Microsoft copilot for your marketing activities. The webinar provides deeper insight into marketing and AI trends, allowing you to deliver faster end-to-end campaigns with customized content for customers to accelerate sales pipeline.
Whether you are new to sales or want to dive deeper into a specific Microsoft solution area, there are training options that fit your knowledge level, role, and, most importantly, your schedule. This hub provides resources to build a flexible learning journey across the depth and breadth of our partner sales and pre-sales training programs. Register now to access on-demand content straight away and enroll for new events as they become available.
On-Demand Training:
To simplify discoverability of on-demand content, we have centralized on-demand videos in the Partner Sales Enablement Hub.
FY24 Solution Play Sales Bootcamp
Day 1 – Azure
Day 2 – Business Applications
Day 3 – Modern Work & Security
Microsoft Low Code Sales Bootcamp
Day 1 – Low Code Solution Play
Day 2 – Selling the Full Value of the Platform
Day 3 – Sales Best Practices and Resources
Microsoft Copilot Partner Bootcamp
Day 1 – Azure
Day 2 – Business Applications
Day 3 – Modern Work & Security
SMB Sales Bootcamp
Day 1 – Azure
Day 2 – Business Applications
Day 3 – Modern Work & Security
Microsoft Copilot Partner Bootcamp
Day 1 – Business Applications
Day 2 – Modern Work & Security
Day 3 – Azure & GitHub
Microsoft Copilot for Security Sales Training
60-minute Virtual session led by Microsoft Security leaders to understand the value propositions that Microsoft Copilot for Security brings to customers.
Boost Your Marketing with Generative AI and Microsoft Through Partner Marketing Webinar
This on-demand webinar shows you how to accelerate your go-to-market campaign strategy by incorporating AI tools like Microsoft Copilot.
Microsoft Cloud Executive Enablement Series
Series 1: Core Concepts
Series 2: Solutions
Series 3: AI and Copilot (coming soon)
Series 4: Industry (coming soon)
Partner Sales Acceleration Program (PSAP)
Azure Apps & Infrastructure
Azure Data & AI
Azure SMB
Business Applications
Business Applications SMB
Modern Work
Modern Work & Security SMB
Security, Compliance, & Identity
Microsoft FY24 Solution Play Enablement for Sales & Pre-Sales
14 Mainstream & SMB Solution Plays
Sales & Pre-Sales tracks available
Knowledge checks
FY23 Bootcamps
Business Applications Sales Bootcamp
Security Sales Bootcamp
Modern Work Sales Bootcamp
Azure Sales Bootcamp
Do More with less Sales Bootcamp
Sales Acceleration Bootcamp
REGISTER TODAY!
Microsoft Tech Community – Latest Blogs –Read More
Entering Data to plot Graphs
hi, i am new to MATLAB and i need help to use it for my assignment
so i was given a set of data and asked to plot it onto a graph. but i am not sure how to.
do i enter the values into a table or array? can anyone help me? any help would be deeply appreciated.hi, i am new to MATLAB and i need help to use it for my assignment
so i was given a set of data and asked to plot it onto a graph. but i am not sure how to.
do i enter the values into a table or array? can anyone help me? any help would be deeply appreciated. hi, i am new to MATLAB and i need help to use it for my assignment
so i was given a set of data and asked to plot it onto a graph. but i am not sure how to.
do i enter the values into a table or array? can anyone help me? any help would be deeply appreciated. homework, wavelength MATLAB Answers — New Questions
Find value of large number
begin{align*}
B_2 &= 0.18525 \
z &= 2.8 times 10^{10} \
H &= 3000175332800 \
R &= frac{z^{3/5}}{(log(z))^{1/5}} \
\
text{Substitute } z text{ with } 2.8 times 10^{10} \
\
R &= left. frac{z^{3/5}}{(log(z))^{1/5}} right|_{z = 2.8 times 10^{10}} \
\
b &= cdot (exp(z_{text{value}} cdot -0.5) – 1) cdot z^{frac{6D – 15}{5}} cdot expleft( frac{B_2 (8D – 5) R}{3} right)
end{align*}
Could you fix this code, or do you have any ideas before I try it in MATLAB?
% Define the constants
B_2 = 0.18525;
H = 3000175332800;
D = 0.9999932;
z = 2.8 * 10^10;
% Define the expression for R
R = (log(z))^(3/5) / (log(log(z)))^(1/5);
% Display R
disp(‘R:’);
disp(R);
RR = double(R);
disp(‘RR:’);
disp(RR);
% Define the expression for b
b = (log(H/(2*pi)))^2 * (exp(-0.5 * z) – 1) * z^((6 * D – 15) / 5) * exp(B_2 * (8 * D – 5) * R / 3);
% Evaluate b
bb = double(b);
% Display b
disp(‘b:’);
disp(b);
disp(‘bb:’);
disp(bb);begin{align*}
B_2 &= 0.18525 \
z &= 2.8 times 10^{10} \
H &= 3000175332800 \
R &= frac{z^{3/5}}{(log(z))^{1/5}} \
\
text{Substitute } z text{ with } 2.8 times 10^{10} \
\
R &= left. frac{z^{3/5}}{(log(z))^{1/5}} right|_{z = 2.8 times 10^{10}} \
\
b &= cdot (exp(z_{text{value}} cdot -0.5) – 1) cdot z^{frac{6D – 15}{5}} cdot expleft( frac{B_2 (8D – 5) R}{3} right)
end{align*}
Could you fix this code, or do you have any ideas before I try it in MATLAB?
% Define the constants
B_2 = 0.18525;
H = 3000175332800;
D = 0.9999932;
z = 2.8 * 10^10;
% Define the expression for R
R = (log(z))^(3/5) / (log(log(z)))^(1/5);
% Display R
disp(‘R:’);
disp(R);
RR = double(R);
disp(‘RR:’);
disp(RR);
% Define the expression for b
b = (log(H/(2*pi)))^2 * (exp(-0.5 * z) – 1) * z^((6 * D – 15) / 5) * exp(B_2 * (8 * D – 5) * R / 3);
% Evaluate b
bb = double(b);
% Display b
disp(‘b:’);
disp(b);
disp(‘bb:’);
disp(bb); begin{align*}
B_2 &= 0.18525 \
z &= 2.8 times 10^{10} \
H &= 3000175332800 \
R &= frac{z^{3/5}}{(log(z))^{1/5}} \
\
text{Substitute } z text{ with } 2.8 times 10^{10} \
\
R &= left. frac{z^{3/5}}{(log(z))^{1/5}} right|_{z = 2.8 times 10^{10}} \
\
b &= cdot (exp(z_{text{value}} cdot -0.5) – 1) cdot z^{frac{6D – 15}{5}} cdot expleft( frac{B_2 (8D – 5) R}{3} right)
end{align*}
Could you fix this code, or do you have any ideas before I try it in MATLAB?
% Define the constants
B_2 = 0.18525;
H = 3000175332800;
D = 0.9999932;
z = 2.8 * 10^10;
% Define the expression for R
R = (log(z))^(3/5) / (log(log(z)))^(1/5);
% Display R
disp(‘R:’);
disp(R);
RR = double(R);
disp(‘RR:’);
disp(RR);
% Define the expression for b
b = (log(H/(2*pi)))^2 * (exp(-0.5 * z) – 1) * z^((6 * D – 15) / 5) * exp(B_2 * (8 * D – 5) * R / 3);
% Evaluate b
bb = double(b);
% Display b
disp(‘b:’);
disp(b);
disp(‘bb:’);
disp(bb); @large MATLAB Answers — New Questions
Solved Windows 11 Explorer bug
My explorer sometimes looks like it does in the picture. How can I fix this?
My explorer sometimes looks like it does in the picture. How can I fix this? Read More
Cash Flow Projections formula
My Cash Flow Projection sheet is displaying inaccuracies (i.e., positive Red figures, #REF!, etc.), so how to change my sheet to avoid these challenges?
My Cash Flow Projection sheet is displaying inaccuracies (i.e., positive Red figures, #REF!, etc.), so how to change my sheet to avoid these challenges? Read More
Formula Bar behind ribbon in Excel for web
For several weeks, on different computers and various sized monitors, I have been unable to access the formula bar when the ribbon is Always showing or Adjusting automatically, whether that ribbon is classic or single line.
On the attached screen captures, you see that the formula bar is checked in the View Menu. The first image you don’t see the formula bar at all, but on the second image you can see the bottom of the formula bar if it is adjusted to be 2 or more lines tall.
Any suggestions?
For several weeks, on different computers and various sized monitors, I have been unable to access the formula bar when the ribbon is Always showing or Adjusting automatically, whether that ribbon is classic or single line. On the attached screen captures, you see that the formula bar is checked in the View Menu. The first image you don’t see the formula bar at all, but on the second image you can see the bottom of the formula bar if it is adjusted to be 2 or more lines tall. Any suggestions? Read More
App password for service account when using Security Defaults
We are using M365 Business Standard licenses and have security defaults enabled. We need to have a service account setup to allow devices (printers, scanners, etc…) to send mail outside our tenant. I cannot find a way to setup an app password or exclude this account from MFA since we can’t use conditional access. Is there a way to do this without disabling security defaults? Hoping I’m missing something here.
Thanks!
We are using M365 Business Standard licenses and have security defaults enabled. We need to have a service account setup to allow devices (printers, scanners, etc…) to send mail outside our tenant. I cannot find a way to setup an app password or exclude this account from MFA since we can’t use conditional access. Is there a way to do this without disabling security defaults? Hoping I’m missing something here. Thanks! Read More
How to change a device name like mouse or keyboard in Settings?
Hi everyone, can anyone tell me how to change the device name? Thanks
Hi everyone, can anyone tell me how to change the device name? Thanks Read More
iPhone only showing like 2 days of email…..
Anyone come across the issue where you are only seeing two day’s worth of emails in the Oulook Mobile App.
Anyone come across the issue where you are only seeing two day’s worth of emails in the Oulook Mobile App. Read More
Ctrl C or V not working constantly with Grid View in SharePoint List
Recently – I’m no longer use Copy&Paste short cuts …on SharePoint List while in Grid View editing
I experience this randomly, on many Lists and web browsers
I have noticed this since introducing new features, such as opening the List Webview App, adding a New built-in Form ….etc.
I never had any similar issues in the past 3 years
P.S. Dont suggest switching to classic view, the switch is not working at all 🙂 !
Recently – I’m no longer use Copy&Paste short cuts …on SharePoint List while in Grid View editingI experience this randomly, on many Lists and web browsers I have noticed this since introducing new features, such as opening the List Webview App, adding a New built-in Form ….etc. I never had any similar issues in the past 3 years P.S. Dont suggest switching to classic view, the switch is not working at all 🙂 ! Read More
D365 Customer Voice – Free Trial
Hi all,
Just wondering if there is a free trial for Customer Voice that still exists?
Is it a case that I could sign up for a free trial of Sales or Customer Service Enterprise and gain access to Customer Voice for 30-days through this?
If someone could kindly let me know for clarity that would be great.
Thank you
Hi all, Just wondering if there is a free trial for Customer Voice that still exists? Is it a case that I could sign up for a free trial of Sales or Customer Service Enterprise and gain access to Customer Voice for 30-days through this? If someone could kindly let me know for clarity that would be great. Thank you Read More
Open Workspaces within the same window
I’m on macOS Sonoma 14.5.
While (trying) working with Workspaces I saw the following.
If you have many spaces (mine are 6) then having N separate windows for every WS is just garbaging your screen.
In my not humble opinion, Workspaces must reuse one window rather than open next one for each one.
Examples of suggested: Vivaldi, Opera.
Please, fix/implement this.
I’m on macOS Sonoma 14.5.While (trying) working with Workspaces I saw the following.If you have many spaces (mine are 6) then having N separate windows for every WS is just garbaging your screen.In my not humble opinion, Workspaces must reuse one window rather than open next one for each one.Examples of suggested: Vivaldi, Opera. Please, fix/implement this. Read More
Windows 11 Slowness issue after upgrading from Windows 10
Some users are complaining about slowness issue after upgrading to Windows 11
When switching tasks the response is slowSpellcheck is slowWhen you click on something it takes 10-30 second’s delaySlow when opening email, typing in excel, taking screenshot
These are some of the Dell models. Out of 35 laptops upgraded already 4 people have complained of slowness.
Model #ProcessorTPM VersionBIOS Version0Memory
Latitude 5420 2.0, 0, 1.381.34.116GBLatitude 5420 2.0, 0, 1.381.34.116GBLatitude 5440 2.0, 0, 1.591.4.532GB
Some users are complaining about slowness issue after upgrading to Windows 11 When switching tasks the response is slowSpellcheck is slowWhen you click on something it takes 10-30 second’s delaySlow when opening email, typing in excel, taking screenshot These are some of the Dell models. Out of 35 laptops upgraded already 4 people have complained of slowness. Model #ProcessorTPM VersionBIOS Version0MemoryLatitude 5420 2.0, 0, 1.381.34.116GBLatitude 5420 2.0, 0, 1.381.34.116GBLatitude 5440 2.0, 0, 1.591.4.532GB Read More
Why is this simple loop not working?
Hi there,
I think I have used this procedure for the following loop many times, but now it isn’t working:
h = 3
z = 4
y = 0
x = 0
for i = 1:3
z(i+1) = z(i) + (2*y(i) + 8*x(i)*(9 – x(i)))*h
y(i+1) = y(i) + z(i)*h
z(i) = z(i+1);
y(i) = y(i+1);
x(i) = x(i) + h
end
I keep getting an error saying Index must not exceed 1.
I don’t know why this is happening.
Can someone help please?Hi there,
I think I have used this procedure for the following loop many times, but now it isn’t working:
h = 3
z = 4
y = 0
x = 0
for i = 1:3
z(i+1) = z(i) + (2*y(i) + 8*x(i)*(9 – x(i)))*h
y(i+1) = y(i) + z(i)*h
z(i) = z(i+1);
y(i) = y(i+1);
x(i) = x(i) + h
end
I keep getting an error saying Index must not exceed 1.
I don’t know why this is happening.
Can someone help please? Hi there,
I think I have used this procedure for the following loop many times, but now it isn’t working:
h = 3
z = 4
y = 0
x = 0
for i = 1:3
z(i+1) = z(i) + (2*y(i) + 8*x(i)*(9 – x(i)))*h
y(i+1) = y(i) + z(i)*h
z(i) = z(i+1);
y(i) = y(i+1);
x(i) = x(i) + h
end
I keep getting an error saying Index must not exceed 1.
I don’t know why this is happening.
Can someone help please? for loops MATLAB Answers — New Questions
Having a string call another string
Hello everyone,
I’m new to matlab and learning it right now.
I was wondering how I would make a string that would prompt the user for an input statement and would output the statment exactly as shown (Your string was: ‘hi there’).
Enter your string: hi there
Your string was: ‘hi there’
Here is what I have so far and i’ve tried multiple different ways and cant seem to figure out how to call it back.
txt = input(‘Enter your string: ‘,"s");Hello everyone,
I’m new to matlab and learning it right now.
I was wondering how I would make a string that would prompt the user for an input statement and would output the statment exactly as shown (Your string was: ‘hi there’).
Enter your string: hi there
Your string was: ‘hi there’
Here is what I have so far and i’ve tried multiple different ways and cant seem to figure out how to call it back.
txt = input(‘Enter your string: ‘,"s"); Hello everyone,
I’m new to matlab and learning it right now.
I was wondering how I would make a string that would prompt the user for an input statement and would output the statment exactly as shown (Your string was: ‘hi there’).
Enter your string: hi there
Your string was: ‘hi there’
Here is what I have so far and i’ve tried multiple different ways and cant seem to figure out how to call it back.
txt = input(‘Enter your string: ‘,"s"); string MATLAB Answers — New Questions
Update of a file online
For the past month or so, when I update a file online, saving it in ForDriveConnector as I was doing before, I need to log out and back in for Matlab Online to see the file. Why is this so?For the past month or so, when I update a file online, saving it in ForDriveConnector as I was doing before, I need to log out and back in for Matlab Online to see the file. Why is this so? For the past month or so, when I update a file online, saving it in ForDriveConnector as I was doing before, I need to log out and back in for Matlab Online to see the file. Why is this so? file-saved-online MATLAB Answers — New Questions
Determining next steps for July 1 Intune iOS App SDK intunemam-mtd:// inclusion requirement
I received the following message from Microsoft: “Our telemetry indicates you have iOS apps integrated with the Intune App SDK that will need to be updated to include the common protocol to ensure your MAM iOS apps continue to run smoothly. (…) Before July 2024, update your iOS app by including the common protocol (intunemam-mtd://) to your app’s Info.plist file.”
I have checked all of our active projects and haven’t found any that appear to be using the Intune App SDK. The project structures in Xcode look something like this, with proprietary folders and package names crossed out:
However, I noticed that we use a shell script (attached below) to wrap some of our apps using the Intune MAM wrapper tool during Azure pipeline runs. Does this qualify as the app being integrated, and if so, what do I need to change to ensure my apps comply for the upcoming July 1 deadline? Do I need to add the Intune App SDK to all of my apps now, or would it suffice to simply add intunemam-mtd:// to my app’s Info.plist files as the original message suggested?
#!/usr/bin/env bash
intune_tool_path=“./IntuneMAMPackager”
curl https://raw.githubusercontent.com/msintuneappsdk/intune-app-wrapping-tool-ios/master/Microsoft%20Intune%20Application%20Restrictions%20Packager%20for%20iOS.dmg –output “${intune_tool_path}”
yes | hdiutil attach “${intune_tool_path}” > /dev/null
/usr/libexec/PlistBuddy -c “Add :’Input Application Package Path’ string ${ipaName}” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’Output Application Package Path’ string ${intuneIpaName}” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’Provisioning Profile Path’ string ${provisioningProfile}” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’SHA-1 Certificate Hash’ string ‘iPhone Distribution: [name]'” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’Prevent Default Build Update’ bool true” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’Extension Provisioning Profile Paths’ array” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’Extension Provisioning Profile Paths’: string ${shareProvisioningProfile}” Intune.plist
/usr/libexec/PlistBuddy -c “Add :’Extension Provisioning Profile Paths’: string ${viewerProvisioningProfile}” Intune.plist
/usr/libexec/PlistBuddy -c “Print” Intune.plist
/Volumes/IntuneMAMAppPackager/IntuneMAMPackager/Contents/MacOS/IntuneMAMPackager -f Intune.plist
Any guidance would be greatly appreciated!
I received the following message from Microsoft: “Our telemetry indicates you have iOS apps integrated with the Intune App SDK that will need to be updated to include the common protocol to ensure your MAM iOS apps continue to run smoothly. (…) Before July 2024, update your iOS app by including the common protocol (intunemam-mtd://) to your app’s Info.plist file.” I have checked all of our active projects and haven’t found any that appear to be using the Intune App SDK. The project structures in Xcode look something like this, with proprietary folders and package names crossed out:However, I noticed that we use a shell script (attached below) to wrap some of our apps using the Intune MAM wrapper tool during Azure pipeline runs. Does this qualify as the app being integrated, and if so, what do I need to change to ensure my apps comply for the upcoming July 1 deadline? Do I need to add the Intune App SDK to all of my apps now, or would it suffice to simply add intunemam-mtd:// to my app’s Info.plist files as the original message suggested? #!/usr/bin/env bashintune_tool_path=”./IntuneMAMPackager”curl https://raw.githubusercontent.com/msintuneappsdk/intune-app-wrapping-tool-ios/master/Microsoft%20Intune%20Application%20Restrictions%20Packager%20for%20iOS.dmg –output “${intune_tool_path}”yes | hdiutil attach “${intune_tool_path}” > /dev/null/usr/libexec/PlistBuddy -c “Add :’Input Application Package Path’ string ${ipaName}” Intune.plist/usr/libexec/PlistBuddy -c “Add :’Output Application Package Path’ string ${intuneIpaName}” Intune.plist/usr/libexec/PlistBuddy -c “Add :’Provisioning Profile Path’ string ${provisioningProfile}” Intune.plist/usr/libexec/PlistBuddy -c “Add :’SHA-1 Certificate Hash’ string ‘iPhone Distribution: [name]'” Intune.plist/usr/libexec/PlistBuddy -c “Add :’Prevent Default Build Update’ bool true” Intune.plist/usr/libexec/PlistBuddy -c “Add :’Extension Provisioning Profile Paths’ array” Intune.plist/usr/libexec/PlistBuddy -c “Add :’Extension Provisioning Profile Paths’: string ${shareProvisioningProfile}” Intune.plist/usr/libexec/PlistBuddy -c “Add :’Extension Provisioning Profile Paths’: string ${viewerProvisioningProfile}” Intune.plist/usr/libexec/PlistBuddy -c “Print” Intune.plist/Volumes/IntuneMAMAppPackager/IntuneMAMPackager/Contents/MacOS/IntuneMAMPackager -f Intune.plist Any guidance would be greatly appreciated! Read More
MS Form Pre fill user name and email in text field
Is it possible to pre fill the text fields in MS form with logged in user name and email at the time of form filling.
Is it possible to pre fill the text fields in MS form with logged in user name and email at the time of form filling. Read More
Using Drive mapping in Intune.
Hi guys!
I`ve being using drive mapping in Intune but a 1 or 2 weeks ago I got some problem and the policy completly stopped.
When I saw in event viewer I got the error below
MDM ConfigurationManager: Command failure status. Configuraton Source ID: (6187F328-9E03-4412-84C5-75043FCDE3E8), Enrollment Type: (MDMDeviceWithAAD), CSP Name: (Policy), Command Type: (Clear: first phase of Delete), CSP URI: (./Device/Vendor/MSFT/Policy/ConfigOperations/ADMXInstall/DriveMapping/Policy/DriveMappingAdmx), Result: (Unknown Win32 Error code: 0x86000011).
Its a configuration policie using ADMX Imported Administrative Templates.
Do you guys have some idea?
Thank you.
Hi guys! I`ve being using drive mapping in Intune but a 1 or 2 weeks ago I got some problem and the policy completly stopped. When I saw in event viewer I got the error belowMDM ConfigurationManager: Command failure status. Configuraton Source ID: (6187F328-9E03-4412-84C5-75043FCDE3E8), Enrollment Type: (MDMDeviceWithAAD), CSP Name: (Policy), Command Type: (Clear: first phase of Delete), CSP URI: (./Device/Vendor/MSFT/Policy/ConfigOperations/ADMXInstall/DriveMapping/Policy/DriveMappingAdmx), Result: (Unknown Win32 Error code: 0x86000011). Its a configuration policie using ADMX Imported Administrative Templates. Do you guys have some idea? Thank you. Read More