Category: News
Different Sample time for RL environment
Hello Everyone,
I am trying to build a RL agent using DQN currently. My environment model is composed of Nonlinear equations which have faster dynamics around 1ms. I was wondering if it possible to have my RL agent to work at 10ms and let the environment run at 1ms. This will obviously mean that for 10 timesteps the environment will be feeding at a constant control action from the RL agent.
I know I can code this up if I create the agent and environment myself, but currently I’m taking advantage of MATLAB’s Reinforcement Learning Toolbox in MATLAB editor and I would save a lot of time if this is possible in the toolbox itself.
Thanks.Hello Everyone,
I am trying to build a RL agent using DQN currently. My environment model is composed of Nonlinear equations which have faster dynamics around 1ms. I was wondering if it possible to have my RL agent to work at 10ms and let the environment run at 1ms. This will obviously mean that for 10 timesteps the environment will be feeding at a constant control action from the RL agent.
I know I can code this up if I create the agent and environment myself, but currently I’m taking advantage of MATLAB’s Reinforcement Learning Toolbox in MATLAB editor and I would save a lot of time if this is possible in the toolbox itself.
Thanks. Hello Everyone,
I am trying to build a RL agent using DQN currently. My environment model is composed of Nonlinear equations which have faster dynamics around 1ms. I was wondering if it possible to have my RL agent to work at 10ms and let the environment run at 1ms. This will obviously mean that for 10 timesteps the environment will be feeding at a constant control action from the RL agent.
I know I can code this up if I create the agent and environment myself, but currently I’m taking advantage of MATLAB’s Reinforcement Learning Toolbox in MATLAB editor and I would save a lot of time if this is possible in the toolbox itself.
Thanks. rl environment, sample time, rl toolbox MATLAB Answers — New Questions
How to modify CSI-RS in wireless network simulator 5G?
Hi everyone,
I’m currently working on MATLAB’s wireless network simulator toolbox. I have two nodes: one gNB and one UE. I’m generating video traffic and using my own TDL channel. My problem is that when I add the Doppler effect to my channel, the automatic MCS selection is not optimal. I don’t understand why the channel estimation degrades with the Doppler effect. Therefore, I’m looking to adjust the CSI-RS parameters to see if this can improve the channel estimation and consequently the MCS selection.I don’t find any function who can permit me to adjust parameters and I can’t go depper in the code of wireless network simulator.Hi everyone,
I’m currently working on MATLAB’s wireless network simulator toolbox. I have two nodes: one gNB and one UE. I’m generating video traffic and using my own TDL channel. My problem is that when I add the Doppler effect to my channel, the automatic MCS selection is not optimal. I don’t understand why the channel estimation degrades with the Doppler effect. Therefore, I’m looking to adjust the CSI-RS parameters to see if this can improve the channel estimation and consequently the MCS selection.I don’t find any function who can permit me to adjust parameters and I can’t go depper in the code of wireless network simulator. Hi everyone,
I’m currently working on MATLAB’s wireless network simulator toolbox. I have two nodes: one gNB and one UE. I’m generating video traffic and using my own TDL channel. My problem is that when I add the Doppler effect to my channel, the automatic MCS selection is not optimal. I don’t understand why the channel estimation degrades with the Doppler effect. Therefore, I’m looking to adjust the CSI-RS parameters to see if this can improve the channel estimation and consequently the MCS selection.I don’t find any function who can permit me to adjust parameters and I can’t go depper in the code of wireless network simulator. csi-rs, simulation MATLAB Answers — New Questions
Separate graph arrows for two y-axes on the matlab
In the figure below, the circle arrows are used for two y-axes to indicate which axis the graph follows, how do you do this?In the figure below, the circle arrows are used for two y-axes to indicate which axis the graph follows, how do you do this? In the figure below, the circle arrows are used for two y-axes to indicate which axis the graph follows, how do you do this? y-axis MATLAB Answers — New Questions
Copilot in Outlook – Access from top nav bar is always in English
Hi,
I’ve noticed that that within Outlook, the Copilot chat interface remains in English, despite the application being set to a different language (French, in my case). Could someone explain how to adjust the language settings of the Copilot chat (found in the top navigation bar) to match the language used in the app?
Hi, I’ve noticed that that within Outlook, the Copilot chat interface remains in English, despite the application being set to a different language (French, in my case). Could someone explain how to adjust the language settings of the Copilot chat (found in the top navigation bar) to match the language used in the app? Read More
After deploying my Python Bot in azure its not working
I am trying to create an Azure bot using the Python Azure sdk framework and deploy it on azure app service azure bot. The bot works well on my local with emulator (windows laptop). But once I deploy it does not work in the test web chat option in Azure.
My app.py file code –
import sqlite3
from pathlib import Path
import sys
import traceback
from datetime import datetime
from googleai import ai
from aiohttp import web
from aiohttp.web import Request, Response, json_response
from botbuilder.core import (
BotFrameworkAdapterSettings,
TurnContext,
BotFrameworkAdapter,
ConversationState,
UserState,
MemoryStorage
)
from botbuilder.core.integration import aiohttp_error_middleware
from botbuilder.schema import Activity, ActivityTypes
from bot import MyBot
from config import DefaultConfig
CONFIG = DefaultConfig()
# Create adapter.
# See https://aka.ms/about-bot-adapter to learn more about how bots work.
SETTINGS = BotFrameworkAdapterSettings(CONFIG.APP_ID, CONFIG.APP_PASSWORD)
ADAPTER = BotFrameworkAdapter(SETTINGS)
# Catch-all for errors.
async def on_error(context: TurnContext, error: Exception):
# This check writes out errors to console log .vs. app insights.
# NOTE: In production environment, you should consider logging this to Azure
# application insights.
print(f”n [on_turn_error] unhandled error: {error}”, file=sys.stderr)
traceback.print_exc()
# if(context.activity.text==””)
await context.send_activity(
“i didnt understand what you mean ,pls rewrite your questin with more info what you looking for”
)
# Send a trace activity if we’re talking to the Bot Framework Emulator
if context.activity.channel_id == “emulator”:
# Create a trace activity that contains the error object
trace_activity = Activity(
label=”TurnError”,
name=”on_turn_error Trace”,
timestamp=datetime.utcnow(),
type=ActivityTypes.trace,
value=f”{error}”,
value_type=”https://www.botframework.com/schemas/error”,
)
# Send a trace activity, which will be displayed in Bot Framework Emulator
await context.send_activity(trace_activity)
ADAPTER.on_turn_error = on_error
def create_database():
conn = sqlite3.connect(‘Chinook.db’)
speech_file_path = Path(__file__).parent / “Chinook_Sqlite.sql”
with open(speech_file_path, ‘r’,encoding=’cp1252′, errors=’replace’) as f:
sql_script = f.read()
conn.executescript(sql_script)
conn.close()
memstore = MemoryStorage()
constate = ConversationState(memstore)
userstate = UserState(memstore)
# Create the Bot
BOT = MyBot(constate,userstate,CONFIG.EXPIRE_AFTER_SECONDS)
# Listen for incoming requests on /api/messages
async def messages(req: Request) -> Response:
# Main bot message handler.
if “application/json” in req.headers[“Content-Type”]:
body = await req.json()
else:
return Response(status=415)
activity = Activity().deserialize(body)
auth_header = req.headers[“Authorization”] if “Authorization” in req.headers else “”
response = await ADAPTER.process_activity(activity, auth_header, BOT.on_turn)
if response:
return json_response(data=response.body, status=response.status)
return Response(status=201)
def init_func(argv):
APP = web.Application(middlewares=[aiohttp_error_middleware])
APP.router.add_post(“/api/messages”, messages)
return APP
if __name__ == “__main__”:
APP = init_func(None)
try:
web.run_app(APP, host=”0.0.0.0″, port=CONFIG.PORT)
except Exception as error:
raise error
Startup command is – python3 -m aiohttp.web -H 0.0.0.0 -P 8000 app:init_func
Error –
IN App Service -> Log stream –
Container bot-webapp01_0_aa92351a for site bot-webapp01 has exited, failing site start
Container bot-webapp01_0_aa92351a didn’t respond to HTTP pings on port: 8000, failing site start. See container logs for debugging.
I am trying to create an Azure bot using the Python Azure sdk framework and deploy it on azure app service azure bot. The bot works well on my local with emulator (windows laptop). But once I deploy it does not work in the test web chat option in Azure.My app.py file code -import sqlite3
from pathlib import Path
import sys
import traceback
from datetime import datetime
from googleai import ai
from aiohttp import web
from aiohttp.web import Request, Response, json_response
from botbuilder.core import (
BotFrameworkAdapterSettings,
TurnContext,
BotFrameworkAdapter,
ConversationState,
UserState,
MemoryStorage
)
from botbuilder.core.integration import aiohttp_error_middleware
from botbuilder.schema import Activity, ActivityTypes
from bot import MyBot
from config import DefaultConfig
CONFIG = DefaultConfig()
# Create adapter.
# See https://aka.ms/about-bot-adapter to learn more about how bots work.
SETTINGS = BotFrameworkAdapterSettings(CONFIG.APP_ID, CONFIG.APP_PASSWORD)
ADAPTER = BotFrameworkAdapter(SETTINGS)
# Catch-all for errors.
async def on_error(context: TurnContext, error: Exception):
# This check writes out errors to console log .vs. app insights.
# NOTE: In production environment, you should consider logging this to Azure
# application insights.
print(f”n [on_turn_error] unhandled error: {error}”, file=sys.stderr)
traceback.print_exc()
# if(context.activity.text==””)
await context.send_activity(
“i didnt understand what you mean ,pls rewrite your questin with more info what you looking for”
)
# Send a trace activity if we’re talking to the Bot Framework Emulator
if context.activity.channel_id == “emulator”:
# Create a trace activity that contains the error object
trace_activity = Activity(
label=”TurnError”,
name=”on_turn_error Trace”,
timestamp=datetime.utcnow(),
type=ActivityTypes.trace,
value=f”{error}”,
value_type=”https://www.botframework.com/schemas/error”,
)
# Send a trace activity, which will be displayed in Bot Framework Emulator
await context.send_activity(trace_activity)
ADAPTER.on_turn_error = on_error
def create_database():
conn = sqlite3.connect(‘Chinook.db’)
speech_file_path = Path(__file__).parent / “Chinook_Sqlite.sql”
with open(speech_file_path, ‘r’,encoding=’cp1252′, errors=’replace’) as f:
sql_script = f.read()
conn.executescript(sql_script)
conn.close()
memstore = MemoryStorage()
constate = ConversationState(memstore)
userstate = UserState(memstore)
# Create the Bot
BOT = MyBot(constate,userstate,CONFIG.EXPIRE_AFTER_SECONDS)
# Listen for incoming requests on /api/messages
async def messages(req: Request) -> Response:
# Main bot message handler.
if “application/json” in req.headers[“Content-Type”]:
body = await req.json()
else:
return Response(status=415)
activity = Activity().deserialize(body)
auth_header = req.headers[“Authorization”] if “Authorization” in req.headers else “”
response = await ADAPTER.process_activity(activity, auth_header, BOT.on_turn)
if response:
return json_response(data=response.body, status=response.status)
return Response(status=201)
def init_func(argv):
APP = web.Application(middlewares=[aiohttp_error_middleware])
APP.router.add_post(“/api/messages”, messages)
return APP
if __name__ == “__main__”:
APP = init_func(None)
try:
web.run_app(APP, host=”0.0.0.0″, port=CONFIG.PORT)
except Exception as error:
raise errorStartup command is – python3 -m aiohttp.web -H 0.0.0.0 -P 8000 app:init_func Error – IN App Service -> Log stream -Container bot-webapp01_0_aa92351a for site bot-webapp01 has exited, failing site startContainer bot-webapp01_0_aa92351a didn’t respond to HTTP pings on port: 8000, failing site start. See container logs for debugging. Read More
Taskbar thumbnails preview not showing on top taskbar
I’m not usually one to ask for help, but I’m stuck with an issue. When I move the taskbar to the top of the screen in Windows 11 (version 21H2), the thumbnail previews don’t show up when I hover over the taskbar icons. All the taskbar settings are correct because the previews work fine when the taskbar is at the bottom.
I’ve searched all over the internet but haven’t found a solution or even a clue about how to fix this. Is it possible to get the previews working with the taskbar at the top? Any help would be appreciated.
I’m not usually one to ask for help, but I’m stuck with an issue. When I move the taskbar to the top of the screen in Windows 11 (version 21H2), the thumbnail previews don’t show up when I hover over the taskbar icons. All the taskbar settings are correct because the previews work fine when the taskbar is at the bottom. I’ve searched all over the internet but haven’t found a solution or even a clue about how to fix this. Is it possible to get the previews working with the taskbar at the top? Any help would be appreciated. Read More
How to Resolve Script Error in QBO/QBS?
I’m encountering a script error in QBO/QBS that disrupts my workflow. The error appears when accessing certain features or running reports. How can I fix this issue? Any troubleshooting steps or solutions would be greatly appreciated.
I’m encountering a script error in QBO/QBS that disrupts my workflow. The error appears when accessing certain features or running reports. How can I fix this issue? Any troubleshooting steps or solutions would be greatly appreciated. Read More
What to Do When Getting Error 503 in QBO?
I’m getting Error 503 in QBO and it’s disrupting my workflow. Can anyone provide detailed steps or troubleshooting tips to resolve this issue?
I’m getting Error 503 in QBO and it’s disrupting my workflow. Can anyone provide detailed steps or troubleshooting tips to resolve this issue? Read More
How to sum the minimum values for each Building with other conditions
Hello,
I want to sum the minimum values (Column Capacity) for each Building (column Building) for a certain process while meeting these conditions:
The Building Status should be “Ready”the Tool Status should be “Ready”
I want the formula to be in one cell. For example the result of the formula will be 12 based on the below example data.
Thank you
Hello, I want to sum the minimum values (Column Capacity) for each Building (column Building) for a certain process while meeting these conditions:The Building Status should be “Ready”the Tool Status should be “Ready”I want the formula to be in one cell. For example the result of the formula will be 12 based on the below example data. Thank you Read More
How to set timezones for datetimes read from parquet files?
I just started playing around with parquet files for storing large tables of test data. All my data has timestamp columns which when saved has a timezone associated with it. When using parquetread(file) to get the whole table the datetimes are read in and display UTC timestamps for the display format with an empty timezone field. Currently I’m using the following to convert back to my local timezone for display purposes:
data = parquetread(file);
data.Timestamp.TimeZone = ‘UTC’;
data.Timestamp.TimeZone = ‘local’;
Is there a more concise way to do this?I just started playing around with parquet files for storing large tables of test data. All my data has timestamp columns which when saved has a timezone associated with it. When using parquetread(file) to get the whole table the datetimes are read in and display UTC timestamps for the display format with an empty timezone field. Currently I’m using the following to convert back to my local timezone for display purposes:
data = parquetread(file);
data.Timestamp.TimeZone = ‘UTC’;
data.Timestamp.TimeZone = ‘local’;
Is there a more concise way to do this? I just started playing around with parquet files for storing large tables of test data. All my data has timestamp columns which when saved has a timezone associated with it. When using parquetread(file) to get the whole table the datetimes are read in and display UTC timestamps for the display format with an empty timezone field. Currently I’m using the following to convert back to my local timezone for display purposes:
data = parquetread(file);
data.Timestamp.TimeZone = ‘UTC’;
data.Timestamp.TimeZone = ‘local’;
Is there a more concise way to do this? parquet datetime, datetime timezones MATLAB Answers — New Questions
Why i’m getting this error
for i =1:N
fx =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaax1jjx’ num2str(i) ‘.txt’];
fy =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaay1jjy’ num2str(i) ‘.txt’];
fu =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaau11jju1’ num2str(i) ‘.txt’];
fv =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaau21jju2’ num2str(i) ‘.txt’];
x = textfile(fx);
y = textfile(fy);
z1 = textfile(fu);
z2 = textfile(fv);
U1 = griddata(x,y,z1,K1,K2);
U2 = griddata(x,y,z2,K1,K2);
zz1 = U1+zz1;
zz2 = U2+zz2;
i ;
end
Error using fscanf
Invalid file identifier. Use fopen to generate a valid file identifier.
Error in untitled>textfile (line 160)
value= fscanf(fileID,’%f’);
this is the error i’m gettingfor i =1:N
fx =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaax1jjx’ num2str(i) ‘.txt’];
fy =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaay1jjy’ num2str(i) ‘.txt’];
fu =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaau11jju1’ num2str(i) ‘.txt’];
fv =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaau21jju2’ num2str(i) ‘.txt’];
x = textfile(fx);
y = textfile(fy);
z1 = textfile(fu);
z2 = textfile(fv);
U1 = griddata(x,y,z1,K1,K2);
U2 = griddata(x,y,z2,K1,K2);
zz1 = U1+zz1;
zz2 = U2+zz2;
i ;
end
Error using fscanf
Invalid file identifier. Use fopen to generate a valid file identifier.
Error in untitled>textfile (line 160)
value= fscanf(fileID,’%f’);
this is the error i’m getting for i =1:N
fx =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaax1jjx’ num2str(i) ‘.txt’];
fy =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaay1jjy’ num2str(i) ‘.txt’];
fu =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaau11jju1’ num2str(i) ‘.txt’];
fv =[ ‘C:UsersSC23M048-BABARMALIKMDownloadsAbaqusHierarchical compositeaau21jju2’ num2str(i) ‘.txt’];
x = textfile(fx);
y = textfile(fy);
z1 = textfile(fu);
z2 = textfile(fv);
U1 = griddata(x,y,z1,K1,K2);
U2 = griddata(x,y,z2,K1,K2);
zz1 = U1+zz1;
zz2 = U2+zz2;
i ;
end
Error using fscanf
Invalid file identifier. Use fopen to generate a valid file identifier.
Error in untitled>textfile (line 160)
value= fscanf(fileID,’%f’);
this is the error i’m getting help MATLAB Answers — New Questions
Usage of the commande nnls(A,b,tol) in MATLAB new versions
Hello,
I want to solve the following non negative least squares problem : nnls(A,b,tol). Given a matrix A, a vector b and a tolerance tol, I want to fin x such ||A*x-b||^2 < tol* ||b||^2 with x>=0
Does someone have any idea how to do it in matlab ?
Regards !Hello,
I want to solve the following non negative least squares problem : nnls(A,b,tol). Given a matrix A, a vector b and a tolerance tol, I want to fin x such ||A*x-b||^2 < tol* ||b||^2 with x>=0
Does someone have any idea how to do it in matlab ?
Regards ! Hello,
I want to solve the following non negative least squares problem : nnls(A,b,tol). Given a matrix A, a vector b and a tolerance tol, I want to fin x such ||A*x-b||^2 < tol* ||b||^2 with x>=0
Does someone have any idea how to do it in matlab ?
Regards ! non negative least squares, matlab, lsqlin MATLAB Answers — New Questions
Cylinder with gyroid infill
Hello,
I have following matlab code
% Clear all previous commands
clear all
close all
clc
% Variables you can change
SizeL = 20; %average length of RVE
Def = 40; %definition
% Variables you shouldn´t change
SFact = (SizeL/2)/pi; %size factor of RVE
A = SFact*pi; %lowest and max coordinates of meshgrid
D = A/Def; %definition factor
% Generation of gyroids
[X,Y,Z] = meshgrid(-A:D:A); %creates mesh grid
% Gyroid equation
OBJ = cos(X/SFact).* sin(Y/SFact) + cos(Y/SFact).* sin(Z/SFact)…
+ cos(Z/SFact).* sin(X/SFact)+(0);
T = 0.5;
OBJ = (OBJ-T).*(OBJ+T);
% Isosurface and isocap
[F1,V1] = isosurface(X,Y,Z,OBJ,0);
[F2,V2] = isocaps(X,Y,Z,OBJ,0,’below’);
%Combines isosurface and isocaps into one
F3 = [F1;F2+length(V1(:,1))];
V3 = [V1;V2];
% Visualization
P = patch(‘Vertices’,V3,’Faces’,F3,’FaceColor’, …
‘red’,’EdgeColor’,’none’);
view(3)
camlight
% STL export of independet files per gyroid.
% Change current file path with desired file path.
stlwrite([‘C:…filepath…G1-T05’ num2str(1) ‘.stl’],F3,V3);
It generates cubical unit cell with gyroid infill. I would need to change it to produce the cylindrical unit cell with height H and radius R with the same infill. I am failing to change the code. Can you help me?
Thank youHello,
I have following matlab code
% Clear all previous commands
clear all
close all
clc
% Variables you can change
SizeL = 20; %average length of RVE
Def = 40; %definition
% Variables you shouldn´t change
SFact = (SizeL/2)/pi; %size factor of RVE
A = SFact*pi; %lowest and max coordinates of meshgrid
D = A/Def; %definition factor
% Generation of gyroids
[X,Y,Z] = meshgrid(-A:D:A); %creates mesh grid
% Gyroid equation
OBJ = cos(X/SFact).* sin(Y/SFact) + cos(Y/SFact).* sin(Z/SFact)…
+ cos(Z/SFact).* sin(X/SFact)+(0);
T = 0.5;
OBJ = (OBJ-T).*(OBJ+T);
% Isosurface and isocap
[F1,V1] = isosurface(X,Y,Z,OBJ,0);
[F2,V2] = isocaps(X,Y,Z,OBJ,0,’below’);
%Combines isosurface and isocaps into one
F3 = [F1;F2+length(V1(:,1))];
V3 = [V1;V2];
% Visualization
P = patch(‘Vertices’,V3,’Faces’,F3,’FaceColor’, …
‘red’,’EdgeColor’,’none’);
view(3)
camlight
% STL export of independet files per gyroid.
% Change current file path with desired file path.
stlwrite([‘C:…filepath…G1-T05’ num2str(1) ‘.stl’],F3,V3);
It generates cubical unit cell with gyroid infill. I would need to change it to produce the cylindrical unit cell with height H and radius R with the same infill. I am failing to change the code. Can you help me?
Thank you Hello,
I have following matlab code
% Clear all previous commands
clear all
close all
clc
% Variables you can change
SizeL = 20; %average length of RVE
Def = 40; %definition
% Variables you shouldn´t change
SFact = (SizeL/2)/pi; %size factor of RVE
A = SFact*pi; %lowest and max coordinates of meshgrid
D = A/Def; %definition factor
% Generation of gyroids
[X,Y,Z] = meshgrid(-A:D:A); %creates mesh grid
% Gyroid equation
OBJ = cos(X/SFact).* sin(Y/SFact) + cos(Y/SFact).* sin(Z/SFact)…
+ cos(Z/SFact).* sin(X/SFact)+(0);
T = 0.5;
OBJ = (OBJ-T).*(OBJ+T);
% Isosurface and isocap
[F1,V1] = isosurface(X,Y,Z,OBJ,0);
[F2,V2] = isocaps(X,Y,Z,OBJ,0,’below’);
%Combines isosurface and isocaps into one
F3 = [F1;F2+length(V1(:,1))];
V3 = [V1;V2];
% Visualization
P = patch(‘Vertices’,V3,’Faces’,F3,’FaceColor’, …
‘red’,’EdgeColor’,’none’);
view(3)
camlight
% STL export of independet files per gyroid.
% Change current file path with desired file path.
stlwrite([‘C:…filepath…G1-T05’ num2str(1) ‘.stl’],F3,V3);
It generates cubical unit cell with gyroid infill. I would need to change it to produce the cylindrical unit cell with height H and radius R with the same infill. I am failing to change the code. Can you help me?
Thank you gyroid, .stl MATLAB Answers — New Questions
Execute commands from an external .exe application
How can I issue commands from Matlab to an external .exe application?
I need to open an exe application and perform a repetitive operation a large number of times, so I need to automate this process.How can I issue commands from Matlab to an external .exe application?
I need to open an exe application and perform a repetitive operation a large number of times, so I need to automate this process. How can I issue commands from Matlab to an external .exe application?
I need to open an exe application and perform a repetitive operation a large number of times, so I need to automate this process. externalcommand, exeprogram, automate MATLAB Answers — New Questions
How to Resolve QBO Error PS107 During Update?
I’m encountering Error PS107 while updating QBO. Has anyone else experienced this issue and found a solution? Any detailed steps to fix this error would be greatly appreciated!
I’m encountering Error PS107 while updating QBO. Has anyone else experienced this issue and found a solution? Any detailed steps to fix this error would be greatly appreciated! Read More
Cross-tenant user access to Planner (in Teams)
Hi
We are facing an issue with Planner access from cross-tenant member users.
After the user changes Tenant, and tries to access a Planner tab in Teams, he/she receives instantly a “Your session has expired.” popup, what is keep repeating if you try to hit Login now.
We are aware that Planner is not supported on Shared channels (what is meant to be used in cross-tenant collaboration), but this is not a Shared channel.
Can someone confirm if Planner is (or will be) compatible with cross-tenant usage??
Gergely Boruzs
HiWe are facing an issue with Planner access from cross-tenant member users.After the user changes Tenant, and tries to access a Planner tab in Teams, he/she receives instantly a “Your session has expired.” popup, what is keep repeating if you try to hit Login now. We are aware that Planner is not supported on Shared channels (what is meant to be used in cross-tenant collaboration), but this is not a Shared channel. Can someone confirm if Planner is (or will be) compatible with cross-tenant usage??Gergely Boruzs Read More
How to change the language for an end user eLearning module in attack simulation e-learning
Hello,
I have started a campaign and some users would like have the content delivered in their preferred language that might be different from the browser or the M365 account language settings.
How is it possible for an end user to select another language for an e-learning module. I remember that their was a drop down menu but it seems to no longer appears . The campaign is based on the standard e-learning from the library that supports more than 20 languages.
Hello,I have started a campaign and some users would like have the content delivered in their preferred language that might be different from the browser or the M365 account language settings.How is it possible for an end user to select another language for an e-learning module. I remember that their was a drop down menu but it seems to no longer appears . The campaign is based on the standard e-learning from the library that supports more than 20 languages. Read More
I am blocked out of Microsoft Learn
Hi there,
I am trying to access the ‘Sales and presales training’ section within ‘Microsoft Learning’, but it states “This account is currently blocked”.
My company is a Microsoft partner, and I am using (as per instructions) my company email.
Any ideas why my account is blocked and how to resolve this issue? I have been trying to login for 2 weeks now, to no avail. Thanks in advance.
Hi there, I am trying to access the ‘Sales and presales training’ section within ‘Microsoft Learning’, but it states “This account is currently blocked”. My company is a Microsoft partner, and I am using (as per instructions) my company email. Any ideas why my account is blocked and how to resolve this issue? I have been trying to login for 2 weeks now, to no avail. Thanks in advance. Read More
Windows Explorer makes sound when pressing Alt+Left or Alt-Right
Hello. I just started having this problem with Windows Explorer. Every time I press Alt+Left or Alt+Right to navigate through folders, it makes the “Asterisk” sound. It’s getting to be very annoying and I can’t seem to find any way to fix this. The only “solution” that I found was completely disabling system sounds which I don’t wanna do. However, I later found out that if I press Alt+Left or Alt+Right, but I hold down the Alt key, let go of the Left/Right key, press the Down key, and release the Alt key, it doesn’t make any sounds. Can you please get the sounds to stop without me having to press the Down key?
Hello. I just started having this problem with Windows Explorer. Every time I press Alt+Left or Alt+Right to navigate through folders, it makes the “Asterisk” sound. It’s getting to be very annoying and I can’t seem to find any way to fix this. The only “solution” that I found was completely disabling system sounds which I don’t wanna do. However, I later found out that if I press Alt+Left or Alt+Right, but I hold down the Alt key, let go of the Left/Right key, press the Down key, and release the Alt key, it doesn’t make any sounds. Can you please get the sounds to stop without me having to press the Down key? Read More
I can’t create a create checkbox char inside a cell
I have many checkboxes writen in a desktop excel doc, now I have to use excel browser version. The doc already have checkboxes with a cross in it, or an empty box. If I try to copy those checkboxes to other parts it disapear because the orginial font type Opensymbol does not exist. There is no such option to insert symbols (I cant understand why). The thing is that in some parts of the doc it’s used and I can see checkboxes.
I have many checkboxes writen in a desktop excel doc, now I have to use excel browser version. The doc already have checkboxes with a cross in it, or an empty box. If I try to copy those checkboxes to other parts it disapear because the orginial font type Opensymbol does not exist. There is no such option to insert symbols (I cant understand why). The thing is that in some parts of the doc it’s used and I can see checkboxes. Read More