Category: News
Intune Multi-Element Dashboard
Hello Microsoft Team and Community,
Recently, my company performed a Root Cause Analysis regarding a maintenance activity which failed. During the RCA, the team performed a few exercises to map the contributing causes and one of the identified challenges reported was the lack of dashboards which show multiple data elements in the same view (Like compliance policy and configuration policy). This functionality would have been great to review post implementation to quickly identify a change which was causing devices to fail compliance checks and would have been a game changer.
Is it possible to request synch-all device functionality to be added to the endpoint manager?
Hello Microsoft Team and Community,Recently, my company performed a Root Cause Analysis regarding a maintenance activity which failed. During the RCA, the team performed a few exercises to map the contributing causes and one of the identified challenges reported was the lack of dashboards which show multiple data elements in the same view (Like compliance policy and configuration policy). This functionality would have been great to review post implementation to quickly identify a change which was causing devices to fail compliance checks and would have been a game changer. Is it possible to request synch-all device functionality to be added to the endpoint manager? Read More
Pnp modern search adding a new managed property, copying past projects field, not working correctly
Full scenario.
We have many programs within our company. We would like to have an employee search where we can filter on programs and not just departments. I will be using a power automate flow to populate the program field in the sharepoint user profile based on a sharepoint list. (I want people to be able to see their programs when they go to their user profile.)
I created a new profile field Programs with a comma multivalue separator.
I made it a managed property and a crawled property and a mapped it to a refinable string.
I only have one employee profile filled in with values, but the values aren’t separated when using the PnP filter web part. They appear on one line.
How can I get each comma separated value to appear on individual lines? What am I missing? I’ve tried EVERYTHING I can think of.
AFC Portal and GLSS Intranet should appear on separate lines.
Any pointers appreciated!
Full scenario. We have many programs within our company. We would like to have an employee search where we can filter on programs and not just departments. I will be using a power automate flow to populate the program field in the sharepoint user profile based on a sharepoint list. (I want people to be able to see their programs when they go to their user profile.) I created a new profile field Programs with a comma multivalue separator. I made it a managed property and a crawled property and a mapped it to a refinable string. I only have one employee profile filled in with values, but the values aren’t separated when using the PnP filter web part. They appear on one line. How can I get each comma separated value to appear on individual lines? What am I missing? I’ve tried EVERYTHING I can think of. AFC Portal and GLSS Intranet should appear on separate lines. Any pointers appreciated! Read More
Blazor Web App Server Side .NET 8 .AddMicrosoftAccount not returning Azure App Roles
I have successfully created a Blazor Web App Server Side, and I am able to authenticate with Azure AD using the .AddMicrosoftAccount()
builder.Services.AddAuthentication(CookieAuthenticationDefaults.AuthenticationScheme)
.AddCookie()
.AddMicrosoftAccount(config =>
{
builder.Configuration.GetSection(“Authentication:Microsoft”).Bind(config);
config.Events = new Microsoft.AspNetCore.Authentication.OAuth.OAuthEvents
{
OnCreatingTicket = async context =>
{
var user = context.Principal;
var claimIdentity = user.Identity as ClaimsIdentity;
var rolesClaim = user.Claims.FirstOrDefault(c => c.Type == ClaimTypes.Role);
var role = user.IsInRole(“Admin”);
if (rolesClaim != null)
{
var claims = rolesClaim.Value.Split(new[] { ‘|’ }, StringSplitOptions.RemoveEmptyEntries);
foreach (var claim in claims)
{
claimIdentity.AddClaim(new Claim(ClaimTypes.Role, claim));
}
}
await Task.CompletedTask;
}
};
});
But it’s not returning the roles claim with the attached roles for the user. The roles are setup correctly in Azure.
I’ve searched high and low on the internet for something that would give me a clue as to where to go. I’ve tried using OpenId, and the roles get returned there, but I can’t seem to use them in components.
How do I get these roles using the .AddMicrosoftAccount() method?
I have successfully created a Blazor Web App Server Side, and I am able to authenticate with Azure AD using the .AddMicrosoftAccount()builder.Services.AddAuthentication(CookieAuthenticationDefaults.AuthenticationScheme)
.AddCookie()
.AddMicrosoftAccount(config =>
{
builder.Configuration.GetSection(“Authentication:Microsoft”).Bind(config);
config.Events = new Microsoft.AspNetCore.Authentication.OAuth.OAuthEvents
{
OnCreatingTicket = async context =>
{
var user = context.Principal;
var claimIdentity = user.Identity as ClaimsIdentity;
var rolesClaim = user.Claims.FirstOrDefault(c => c.Type == ClaimTypes.Role);
var role = user.IsInRole(“Admin”);
if (rolesClaim != null)
{
var claims = rolesClaim.Value.Split(new[] { ‘|’ }, StringSplitOptions.RemoveEmptyEntries);
foreach (var claim in claims)
{
claimIdentity.AddClaim(new Claim(ClaimTypes.Role, claim));
}
}
await Task.CompletedTask;
}
};
}); But it’s not returning the roles claim with the attached roles for the user. The roles are setup correctly in Azure. I’ve searched high and low on the internet for something that would give me a clue as to where to go. I’ve tried using OpenId, and the roles get returned there, but I can’t seem to use them in components. How do I get these roles using the .AddMicrosoftAccount() method? Read More
spiral analysis and removal of background
Hi i am attaching an image. this has a computer generated spiral and a hand drawn spiral. i want to remove the numbers (angles) writeen on the image and check how the patient drawn spiral is different from the system generated.
please help me remove the numbers in thisHi i am attaching an image. this has a computer generated spiral and a hand drawn spiral. i want to remove the numbers (angles) writeen on the image and check how the patient drawn spiral is different from the system generated.
please help me remove the numbers in this Hi i am attaching an image. this has a computer generated spiral and a hand drawn spiral. i want to remove the numbers (angles) writeen on the image and check how the patient drawn spiral is different from the system generated.
please help me remove the numbers in this spiral, background, image analysis MATLAB Answers — New Questions
EMACS key bindings in App designer?
I use the EMACS key bindings in the Matlab editor (even on Windows). But I can’t find a way to change the key bindings for the App Designer. My fingers are used to the EMACS bindings and this is driving me crazy!
Is there a some way of changing the App Designer key bindings that I am missing? Thanks!I use the EMACS key bindings in the Matlab editor (even on Windows). But I can’t find a way to change the key bindings for the App Designer. My fingers are used to the EMACS bindings and this is driving me crazy!
Is there a some way of changing the App Designer key bindings that I am missing? Thanks! I use the EMACS key bindings in the Matlab editor (even on Windows). But I can’t find a way to change the key bindings for the App Designer. My fingers are used to the EMACS bindings and this is driving me crazy!
Is there a some way of changing the App Designer key bindings that I am missing? Thanks! appdesigner MATLAB Answers — New Questions
How to apply a linear ramp to start and end of several EEG epochs to attenuate the abrupt onset and offset?
Hey there! I have a set of auditory EEG data recorded collected with the presentation of auditory stimuli, where each stimulus consists of a 3-second speech with a 5-second inter-stimulus interval. Each stimulus onset is marked by an S1 trigger. Currently I have cut off the EEG data without audio input, but for the remain EEG data with auditory stimulation I would like to apply a linear ramp to to both sides of each trial corresponded neural response (10% at each side) to attenuate the abrupt onset and offset. Could you please help me with the code to accomplish this task? Thanks a lot!Hey there! I have a set of auditory EEG data recorded collected with the presentation of auditory stimuli, where each stimulus consists of a 3-second speech with a 5-second inter-stimulus interval. Each stimulus onset is marked by an S1 trigger. Currently I have cut off the EEG data without audio input, but for the remain EEG data with auditory stimulation I would like to apply a linear ramp to to both sides of each trial corresponded neural response (10% at each side) to attenuate the abrupt onset and offset. Could you please help me with the code to accomplish this task? Thanks a lot! Hey there! I have a set of auditory EEG data recorded collected with the presentation of auditory stimuli, where each stimulus consists of a 3-second speech with a 5-second inter-stimulus interval. Each stimulus onset is marked by an S1 trigger. Currently I have cut off the EEG data without audio input, but for the remain EEG data with auditory stimulation I would like to apply a linear ramp to to both sides of each trial corresponded neural response (10% at each side) to attenuate the abrupt onset and offset. Could you please help me with the code to accomplish this task? Thanks a lot! auditory eeg, matlab, linear ramp, smoothing eeg MATLAB Answers — New Questions
How to change list index with number bullets
I want to continue the automated numbering from 2.01 to 2.02 and so on, but the bulleted list will only allow me to go to 1.03 or 2.
as you can see, 2.01 isn’t part of the list:
I can’t get the list to jump to 2.01.
I want to continue the automated numbering from 2.01 to 2.02 and so on, but the bulleted list will only allow me to go to 1.03 or 2. as you can see, 2.01 isn’t part of the list:I can’t get the list to jump to 2.01. Read More
Permissions to Create & Edit GPOs in Specific OU
In Windows Server 2019, user x1 has permissions assigned to OU1. There are 10 computers and 10 users in OU1. However, user x1 does not have Windows Server 2019 administrator permissions. I would like to allow user x1 to create and edit Group Policy Objects (GPOs) in OU1 from a Windows 10 machine. How to do it?
I would appreciate any help in resolving this issue.
In Windows Server 2019, user x1 has permissions assigned to OU1. There are 10 computers and 10 users in OU1. However, user x1 does not have Windows Server 2019 administrator permissions. I would like to allow user x1 to create and edit Group Policy Objects (GPOs) in OU1 from a Windows 10 machine. How to do it?I would appreciate any help in resolving this issue. Read More
Editing a data product requires unpublishing EVERY child asset in MS Purview
In MS Purview, editing a data product requires unpublishing EVERY child asset. We needed to edit a simple description and had to unpublish every glossary term to republish. Huge room for manual error and is time consuming.
Can this be fixed so that either:
it will not be necessary to unpublish every child or
there is a quick way in the UI to unpublish multiple assets?
Thoughts of others on this forum?
In MS Purview, editing a data product requires unpublishing EVERY child asset. We needed to edit a simple description and had to unpublish every glossary term to republish. Huge room for manual error and is time consuming.Can this be fixed so that either:it will not be necessary to unpublish every child orthere is a quick way in the UI to unpublish multiple assets?Thoughts of others on this forum? Read More
Linked Formulas Revert to Obsolete Values AFTER Opening File.
I have an issue where values in a spreadsheet revert to previous values AFTER the file has been reopened, and has been worked in for some time. For example: Supplies costs are calculated in one File 1, and is referred to in File 2. If we update File 1, the value in File 2 updates and we save. Upon re-opening File 2, the value reflects the new, correct value, but if you perform certain actions (copy a tab, re-save the file), the value reverts to the previous amount. It’s odd because I would more understand if it showed the old value upon opening, and then updated as it recalculated, but this is the opposite. It shows the correct value upon opening, and then reverts to an old value that doesn’t even exist in the linked file.
Any thoughts on what causes this, and how to fix?
I have an issue where values in a spreadsheet revert to previous values AFTER the file has been reopened, and has been worked in for some time. For example: Supplies costs are calculated in one File 1, and is referred to in File 2. If we update File 1, the value in File 2 updates and we save. Upon re-opening File 2, the value reflects the new, correct value, but if you perform certain actions (copy a tab, re-save the file), the value reverts to the previous amount. It’s odd because I would more understand if it showed the old value upon opening, and then updated as it recalculated, but this is the opposite. It shows the correct value upon opening, and then reverts to an old value that doesn’t even exist in the linked file. Any thoughts on what causes this, and how to fix? Read More
Unable to have labels applied based on custom created classification rules (SITs)
In MS Purview, it appears that you are unable to have labels applied based on custom created classification rules (SITs). You are limited to just the out of the box SITs/Classifiers).
Does anybody know of a way around this?
Is MS addressing this in a future release?
In MS Purview, it appears that you are unable to have labels applied based on custom created classification rules (SITs). You are limited to just the out of the box SITs/Classifiers).Does anybody know of a way around this?Is MS addressing this in a future release? Read More
Error while using Move To between two document libraries within the same site collection
We are attempting to use “Move to” from one document library to another document library within the same site collection (no subsites), and keep receiving the following error:
The source library contains 3500 items and there are 1500 items in the destination library. The destination library was created from the source, so all of the fields are the same. DocID is enabled and there are some lookup fields within the libraries, but that is not a stated limitation of “Move to”. The error is being received by multiple users, all with Site Collection administrator privileges, and it is happening regardless of whether we attempt to move 200 files or 2. The “Copy to” functionality is successful as a stopgap measure, but we would prefer having “Move to”.
Has anyone else experienced this? If so, how did you resolve it?
Thank you!
We are attempting to use “Move to” from one document library to another document library within the same site collection (no subsites), and keep receiving the following error: The source library contains 3500 items and there are 1500 items in the destination library. The destination library was created from the source, so all of the fields are the same. DocID is enabled and there are some lookup fields within the libraries, but that is not a stated limitation of “Move to”. The error is being received by multiple users, all with Site Collection administrator privileges, and it is happening regardless of whether we attempt to move 200 files or 2. The “Copy to” functionality is successful as a stopgap measure, but we would prefer having “Move to”.Has anyone else experienced this? If so, how did you resolve it?Thank you! Read More
User can’t access item in list even though they seem to have permission
Hi
I have a SPO list which users can add to.
In a Flow I break permissions and then grant edit access to a user.
I can see in the item that they have “Can edit” access.
(this gives the same message)
https://contoso.sharepoint.com/sites/mysite/Lists/mylist/DispForm.aspx?ID=56
However when they click on the item they get
Sorry, something went wrong
No item exists at https://contoso.sharepoint.com/sites/mysite/Lists/mylist/DispForm.aspx?ID=56&ContentTypeId=0x0100144F21075C460449AF03405563EEBFE4.
It may have been deleted or renamed by another user.
In my Flow I do this …
Thanks
P
HiI have a SPO list which users can add to.In a Flow I break permissions and then grant edit access to a user.I can see in the item that they have “Can edit” access. (this gives the same message)https://contoso.sharepoint.com/sites/mysite/Lists/mylist/DispForm.aspx?ID=56 However when they click on the item they get Sorry, something went wrongNo item exists at https://contoso.sharepoint.com/sites/mysite/Lists/mylist/DispForm.aspx?ID=56&ContentTypeId=0x0100144F21075C460449AF03405563EEBFE4.It may have been deleted or renamed by another user. In my Flow I do this … ThanksP Read More
How to train a vector multiple-input multiple-output network
I want to train a vector multi-input, multi-output network, but I get the error “Number of input data formats (1) and number of network inputs (2) must match”. This is the code,
clear
input1ds=signalDatastore("input1.csv")
input2ds=signalDatastore("input2.csv")
output1ds=signalDatastore("output1.csv")
output2ds=signalDatastore("output2.csv")
ds=combine(input1ds,input2ds,output1ds,output2ds)
isShuffleable(ds)
% 入力とターゲット
% x = [[0:0.1:10]’ [0:0.1:10]’]
% t = sin(x)
net=dlnetwork
% ニューラルネットワークの定義
layers1 = [
featureInputLayer(1,"name","input1")
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(1) % 1ユニットの全結合層
];
layers2 = [
featureInputLayer(1,"Name","input2")
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(1) % 1ユニットの全結合層
];
net=addLayers(net,layers1)
net=addLayers(net,layers2)
net.plot
% layers=layerGraph()
% layers=addLayers(layers,layers1)
% layers=addLayers(layers,layers2)
% オプションの設定
options = trainingOptions(‘sgdm’, … % 最適化アルゴリズム
‘MaxEpochs’, 500, … % 最大エポック数
‘MiniBatchSize’, 2^3, … % ミニバッチサイズ
‘Verbose’, true,…% 進行状況の表示
‘InputDataFormats’, {‘SB’} …
)
% ニューラルネットワークのトレーニング
customLossFunction = @(Y, T) customloss(Y, T);
net = trainnet(ds,net,customLossFunction,options) % x,tは縦ベクトル
The “input1.csv” and “output1.csv” all contain a single column of vertical vectors. This time, it is a 2-input, 2-output network.
The function “customloss” is a function I defined myself. This is the error statement.
Error using trainnet (line 46)
Number of input data formats (1) and number of network inputs (2) must match.
Error in parallel_learn_test (line 53)
net = trainnet(ds,net,customLossFunction,options) % x,tは縦ベクトル
What is wrong? And what solutions are available?I want to train a vector multi-input, multi-output network, but I get the error “Number of input data formats (1) and number of network inputs (2) must match”. This is the code,
clear
input1ds=signalDatastore("input1.csv")
input2ds=signalDatastore("input2.csv")
output1ds=signalDatastore("output1.csv")
output2ds=signalDatastore("output2.csv")
ds=combine(input1ds,input2ds,output1ds,output2ds)
isShuffleable(ds)
% 入力とターゲット
% x = [[0:0.1:10]’ [0:0.1:10]’]
% t = sin(x)
net=dlnetwork
% ニューラルネットワークの定義
layers1 = [
featureInputLayer(1,"name","input1")
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(1) % 1ユニットの全結合層
];
layers2 = [
featureInputLayer(1,"Name","input2")
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(1) % 1ユニットの全結合層
];
net=addLayers(net,layers1)
net=addLayers(net,layers2)
net.plot
% layers=layerGraph()
% layers=addLayers(layers,layers1)
% layers=addLayers(layers,layers2)
% オプションの設定
options = trainingOptions(‘sgdm’, … % 最適化アルゴリズム
‘MaxEpochs’, 500, … % 最大エポック数
‘MiniBatchSize’, 2^3, … % ミニバッチサイズ
‘Verbose’, true,…% 進行状況の表示
‘InputDataFormats’, {‘SB’} …
)
% ニューラルネットワークのトレーニング
customLossFunction = @(Y, T) customloss(Y, T);
net = trainnet(ds,net,customLossFunction,options) % x,tは縦ベクトル
The “input1.csv” and “output1.csv” all contain a single column of vertical vectors. This time, it is a 2-input, 2-output network.
The function “customloss” is a function I defined myself. This is the error statement.
Error using trainnet (line 46)
Number of input data formats (1) and number of network inputs (2) must match.
Error in parallel_learn_test (line 53)
net = trainnet(ds,net,customLossFunction,options) % x,tは縦ベクトル
What is wrong? And what solutions are available? I want to train a vector multi-input, multi-output network, but I get the error “Number of input data formats (1) and number of network inputs (2) must match”. This is the code,
clear
input1ds=signalDatastore("input1.csv")
input2ds=signalDatastore("input2.csv")
output1ds=signalDatastore("output1.csv")
output2ds=signalDatastore("output2.csv")
ds=combine(input1ds,input2ds,output1ds,output2ds)
isShuffleable(ds)
% 入力とターゲット
% x = [[0:0.1:10]’ [0:0.1:10]’]
% t = sin(x)
net=dlnetwork
% ニューラルネットワークの定義
layers1 = [
featureInputLayer(1,"name","input1")
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(1) % 1ユニットの全結合層
];
layers2 = [
featureInputLayer(1,"Name","input2")
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(10) % 10ユニットの全結合層
tanhLayer
fullyConnectedLayer(1) % 1ユニットの全結合層
];
net=addLayers(net,layers1)
net=addLayers(net,layers2)
net.plot
% layers=layerGraph()
% layers=addLayers(layers,layers1)
% layers=addLayers(layers,layers2)
% オプションの設定
options = trainingOptions(‘sgdm’, … % 最適化アルゴリズム
‘MaxEpochs’, 500, … % 最大エポック数
‘MiniBatchSize’, 2^3, … % ミニバッチサイズ
‘Verbose’, true,…% 進行状況の表示
‘InputDataFormats’, {‘SB’} …
)
% ニューラルネットワークのトレーニング
customLossFunction = @(Y, T) customloss(Y, T);
net = trainnet(ds,net,customLossFunction,options) % x,tは縦ベクトル
The “input1.csv” and “output1.csv” all contain a single column of vertical vectors. This time, it is a 2-input, 2-output network.
The function “customloss” is a function I defined myself. This is the error statement.
Error using trainnet (line 46)
Number of input data formats (1) and number of network inputs (2) must match.
Error in parallel_learn_test (line 53)
net = trainnet(ds,net,customLossFunction,options) % x,tは縦ベクトル
What is wrong? And what solutions are available? deep learning, neural networks MATLAB Answers — New Questions
Does fread use cast when reading non-integer byte data
Using fread to read in binary containing 14bit ADC data streamed from an FPGA.
Wondering if fread does a cast when you use ubitn or bitn for the precision input.
Currently My fread setup similar to the code below spits out int16.
Output_data=fread(FID,Inf,’*bit14′)
When I go to get this into a double will this int16 need to be bitsliced or cast.Using fread to read in binary containing 14bit ADC data streamed from an FPGA.
Wondering if fread does a cast when you use ubitn or bitn for the precision input.
Currently My fread setup similar to the code below spits out int16.
Output_data=fread(FID,Inf,’*bit14′)
When I go to get this into a double will this int16 need to be bitsliced or cast. Using fread to read in binary containing 14bit ADC data streamed from an FPGA.
Wondering if fread does a cast when you use ubitn or bitn for the precision input.
Currently My fread setup similar to the code below spits out int16.
Output_data=fread(FID,Inf,’*bit14′)
When I go to get this into a double will this int16 need to be bitsliced or cast. fread, binary, cast, fixed-point MATLAB Answers — New Questions
How do I label the points in a multidimensional scaling plot?
I am studying how to do multidimensional scaling in matlab. I am able to reproduce the output (2D plot) from a published example (http://www.sthda.com/english/articles/31-principal-component-methods-in-r-practical-guide/122-multidimensional-scaling-essentials-algorithms-and-r-code/).
The output is based on the data table found in the Swiss Fertility and Socioeconomic Indicators (1888) (https://rpubs.com/krishnakuyate/Swiss_FS_Data).
I constructed a 47×47 array of Euclidean distances (D) of the Swiss Fertility and Socioeconomic Indicators and ran Y=cmdscale(D,2) to obtain a plot of these data:
My plot looks very similar (but inverted mirror image) to the published plot from http://www.sthda.com/english/articles/31-principal-component-methods-in-r-practical-guide/122-multidimensional-scaling-essentials-algorithms-and-r-code/:
But how can I get matlab to label the points in my plot as is done above in the published figure?I am studying how to do multidimensional scaling in matlab. I am able to reproduce the output (2D plot) from a published example (http://www.sthda.com/english/articles/31-principal-component-methods-in-r-practical-guide/122-multidimensional-scaling-essentials-algorithms-and-r-code/).
The output is based on the data table found in the Swiss Fertility and Socioeconomic Indicators (1888) (https://rpubs.com/krishnakuyate/Swiss_FS_Data).
I constructed a 47×47 array of Euclidean distances (D) of the Swiss Fertility and Socioeconomic Indicators and ran Y=cmdscale(D,2) to obtain a plot of these data:
My plot looks very similar (but inverted mirror image) to the published plot from http://www.sthda.com/english/articles/31-principal-component-methods-in-r-practical-guide/122-multidimensional-scaling-essentials-algorithms-and-r-code/:
But how can I get matlab to label the points in my plot as is done above in the published figure? I am studying how to do multidimensional scaling in matlab. I am able to reproduce the output (2D plot) from a published example (http://www.sthda.com/english/articles/31-principal-component-methods-in-r-practical-guide/122-multidimensional-scaling-essentials-algorithms-and-r-code/).
The output is based on the data table found in the Swiss Fertility and Socioeconomic Indicators (1888) (https://rpubs.com/krishnakuyate/Swiss_FS_Data).
I constructed a 47×47 array of Euclidean distances (D) of the Swiss Fertility and Socioeconomic Indicators and ran Y=cmdscale(D,2) to obtain a plot of these data:
My plot looks very similar (but inverted mirror image) to the published plot from http://www.sthda.com/english/articles/31-principal-component-methods-in-r-practical-guide/122-multidimensional-scaling-essentials-algorithms-and-r-code/:
But how can I get matlab to label the points in my plot as is done above in the published figure? multidimensional scaliing, 2d plot, label plot MATLAB Answers — New Questions
BUG: Categories not saving on Bookings with Me meetings
I’m trying to add categories to a meeting type in Bookings with Me, but when I save the meeting type, the categories are not saved.
I’m trying to add categories to a meeting type in Bookings with Me, but when I save the meeting type, the categories are not saved. Read More
Office 365 Business Premium License for Nonprofit Staff
I got information about the number of licenses available (10 licenses) when I signed up for the plan, but the number of licenses available (just one license).
What’s the correct number of it? Is it possible to use Office 365 and Teams for the staff without buy licenses, even using them online?
Thanks in advance
I got information about the number of licenses available (10 licenses) when I signed up for the plan, but the number of licenses available (just one license).What’s the correct number of it? Is it possible to use Office 365 and Teams for the staff without buy licenses, even using them online? Thanks in advance Read More
รหัสคำแนะนำ Bit.get ใหม่: qp29 (การลงทะเบียนใหม่ 2024)
รหัสอ้างอิง B I T GE T ที่ดีที่สุดสำหรับปี 2024 คือ “qp29” ใช้รหัสนี้เพื่อรับส่วนลด 30% จากการซื้อขาย นอกจากนี้ ผู้ใช้ใหม่ที่ลงทะเบียน B I T GET โดยใช้รหัสโปรโมชั่น “qp29” จะได้รับรางวัลพิเศษสูงสุดถึง 5,005 USDT
ข้อดีของรหัสอ้างอิง B I T GE T qp29
รหัสอ้างอิง B I T GE T qp29 มอบวิธีที่ยอดเยี่ยมในการประหยัดค่าธรรมเนียมการซื้อขายพร้อมทั้งรับรางวัลที่น่าดึงดูด เมื่อป้อนรหัสนี้ คุณจะได้รับส่วนลด 30% ถาวรสำหรับค่าธรรมเนียมการซื้อขายของคุณ นอกจากนี้ หากคุณแชร์รหัสอ้างอิงส่วนตัวกับเพื่อน ๆ คุณจะได้รับโบนัส 50% จากค่าธรรมเนียมการซื้อขายของพวกเขา ใช้ประโยชน์จากโอกาสนี้เพื่อเพิ่มรายได้ของคุณพร้อมกับนำผู้ใช้ใหม่มาที่แพลตฟอร์ม
รหัสอ้างอิง B I T GE T ที่ดีที่สุดสำหรับปี 2024
รหัสอ้างอิง B I T GE T ที่แนะนำสำหรับปี 2024 คือ qp29 เมื่อคุณสมัครด้วยรหัสนี้ คุณจะได้รับโบนัสสูงสุดถึง 5,005 USDT แบ่งปันรหัสนี้กับเพื่อน ๆ เพื่อรับค่าคอมมิชชั่น 50% ช่วยให้คุณได้รับโบนัสการสมัครสูงสุดถึง 5,005 USDT นี่เป็นวิธีที่ยอดเยี่ยมในการยกระดับประสบการณ์การซื้อขายของคุณด้วยสิทธิประโยชน์เพิ่มเติมในขณะที่สนับสนุนให้ผู้อื่นเข้าร่วม
วิธีใช้รหัสอ้างอิง B I T GE T
รหัสอ้างอิง B I T GE T มีไว้สำหรับผู้ใช้ใหม่ที่ยังไม่ได้ลงทะเบียนบนแพลตฟอร์มโดยเฉพาะ ทำตามขั้นตอนเหล่านี้เพื่อใช้รหัส:
เยี่ยมชมเว็บไซต์ B I T GET และคลิก “ลงชื่อเข้าใช้”
ป้อนรายละเอียดผู้ใช้ของคุณและทำตามขั้นตอน KYC และ AML
เมื่อได้รับแจ้งให้ใส่รหัสอ้างอิงของคุณ ให้ป้อน qp29
ดำเนินการลงทะเบียนให้เสร็จสิ้นและดำเนินการตรวจสอบที่จำเป็นให้เสร็จสิ้น
เมื่อตรงตามเงื่อนไขทั้งหมดแล้ว คุณจะได้รับโบนัสต้อนรับทันที
เหตุใดจึงต้องใช้รหัสอ้างอิง B I T GE T
ส่วนลดถาวร: ด้วยรหัส qp29 คุณจะได้รับส่วนลด 30% โดยอัตโนมัติสำหรับค่าคอมมิชชั่นการซื้อขายทั้งหมด
โบนัสต้อนรับมากมาย: ผู้ใช้ใหม่สามารถรับสูงถึง 5,005 USDT
รายได้เพิ่มเติม: แบ่งปันรหัสของคุณและรับค่าคอมมิชชั่น 50%
ใช้ประโยชน์จากโอกาสนี้และรักษาความได้เปรียบของคุณด้วยรหัสอ้างอิง B I T GE T ปัจจุบัน qp29! รับสูงถึง 5,005 USDT และรับประโยชน์จากส่วนลดถาวรสำหรับค่าธรรมเนียมการซื้อขายของคุณ
รหัสอ้างอิง B I T GE T ที่ดีที่สุดสำหรับปี 2024 คือ “qp29” ใช้รหัสนี้เพื่อรับส่วนลด 30% จากการซื้อขาย นอกจากนี้ ผู้ใช้ใหม่ที่ลงทะเบียน B I T GET โดยใช้รหัสโปรโมชั่น “qp29” จะได้รับรางวัลพิเศษสูงสุดถึง 5,005 USDTข้อดีของรหัสอ้างอิง B I T GE T qp29รหัสอ้างอิง B I T GE T qp29 มอบวิธีที่ยอดเยี่ยมในการประหยัดค่าธรรมเนียมการซื้อขายพร้อมทั้งรับรางวัลที่น่าดึงดูด เมื่อป้อนรหัสนี้ คุณจะได้รับส่วนลด 30% ถาวรสำหรับค่าธรรมเนียมการซื้อขายของคุณ นอกจากนี้ หากคุณแชร์รหัสอ้างอิงส่วนตัวกับเพื่อน ๆ คุณจะได้รับโบนัส 50% จากค่าธรรมเนียมการซื้อขายของพวกเขา ใช้ประโยชน์จากโอกาสนี้เพื่อเพิ่มรายได้ของคุณพร้อมกับนำผู้ใช้ใหม่มาที่แพลตฟอร์มรหัสอ้างอิง B I T GE T ที่ดีที่สุดสำหรับปี 2024รหัสอ้างอิง B I T GE T ที่แนะนำสำหรับปี 2024 คือ qp29 เมื่อคุณสมัครด้วยรหัสนี้ คุณจะได้รับโบนัสสูงสุดถึง 5,005 USDT แบ่งปันรหัสนี้กับเพื่อน ๆ เพื่อรับค่าคอมมิชชั่น 50% ช่วยให้คุณได้รับโบนัสการสมัครสูงสุดถึง 5,005 USDT นี่เป็นวิธีที่ยอดเยี่ยมในการยกระดับประสบการณ์การซื้อขายของคุณด้วยสิทธิประโยชน์เพิ่มเติมในขณะที่สนับสนุนให้ผู้อื่นเข้าร่วมวิธีใช้รหัสอ้างอิง B I T GE Tรหัสอ้างอิง B I T GE T มีไว้สำหรับผู้ใช้ใหม่ที่ยังไม่ได้ลงทะเบียนบนแพลตฟอร์มโดยเฉพาะ ทำตามขั้นตอนเหล่านี้เพื่อใช้รหัส:เยี่ยมชมเว็บไซต์ B I T GET และคลิก “ลงชื่อเข้าใช้”ป้อนรายละเอียดผู้ใช้ของคุณและทำตามขั้นตอน KYC และ AMLเมื่อได้รับแจ้งให้ใส่รหัสอ้างอิงของคุณ ให้ป้อน qp29ดำเนินการลงทะเบียนให้เสร็จสิ้นและดำเนินการตรวจสอบที่จำเป็นให้เสร็จสิ้นเมื่อตรงตามเงื่อนไขทั้งหมดแล้ว คุณจะได้รับโบนัสต้อนรับทันทีเหตุใดจึงต้องใช้รหัสอ้างอิง B I T GE Tส่วนลดถาวร: ด้วยรหัส qp29 คุณจะได้รับส่วนลด 30% โดยอัตโนมัติสำหรับค่าคอมมิชชั่นการซื้อขายทั้งหมดโบนัสต้อนรับมากมาย: ผู้ใช้ใหม่สามารถรับสูงถึง 5,005 USDTรายได้เพิ่มเติม: แบ่งปันรหัสของคุณและรับค่าคอมมิชชั่น 50%ใช้ประโยชน์จากโอกาสนี้และรักษาความได้เปรียบของคุณด้วยรหัสอ้างอิง B I T GE T ปัจจุบัน qp29! รับสูงถึง 5,005 USDT และรับประโยชน์จากส่วนลดถาวรสำหรับค่าธรรมเนียมการซื้อขายของคุณ Read More