Email: helpdesk@telkomuniversity.ac.id

This Portal for internal use only!

All Categories

All Categories

Search

0 Wishlist

Cart

Categories
More Categories Less Categories

iconTicket Service Desk

All Categories

All Categories

Search

0 Wishlist

Cart

Menu
Home/Matlab/Issue Related to Interfacing simulink with arduino hardware

Issue Related to Interfacing simulink with arduino hardware

PuTI / 2025-09-27
Issue Related to Interfacing simulink with arduino hardware
Matlab News

Hi. This is the error I am getting. I had installed the simulink for arduino add on for hardware support
And also sort for the COM port issue as mentioned in your web site
### Starting build procedure for: Lab_1_2 "### Generating static library." "F:/waqas/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1" SHELL="%SystemRoot%/system32/cmd.exe" -f avrcore.mk all gmake[1]: Entering directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1′ "### Successfully generated libcore.a library." gmake[1]: Leaving directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1′ "F:/waqas/bin/win64/gmake" -j5 SHELL="%SystemRoot%/system32/cmd.exe" -f "Lab_1_2.mk" all gmake[1]: Entering directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw’ "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-g++" -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include –
IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "MW_arduino_digitalio.o" "C:/ProgramData/MATLAB/SupportPackages/R2023b/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp" "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"xcp_ext_mode.dep" -MT"xcp_ext_mode.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGavr-g++: error: Box/Lab: No such file or directory ER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "xcp_ext_mode.o" "F:/waqas/toolbox/coder/xcp/src/target/ext_mode/src/xcp_ext_mode.c" avr-g++: error: 1.2: No such file or directory avr-g++: error: Box/Lab: No such file or directory avr-g++: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** No rule to make target F:/ACE’, needed by Lab_1_2.o’. Stop. gmake[1]: *** Waiting for unfinished jobs…. gmake[1]: *** [MW_arduino_digitalio.o] Error 1 avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2: No such file or directory avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** [xcp_ext_mode.o] Error 1 gmake[1]: Leaving directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw’ gmake: *** [all] Error 2 The make command returned an error of 2 ### Build procedure for Lab_1_2 aborted due to an error. Build Summary Top model targets built: Model Action Rebuild Reason =================================================================== Lab_1_2 Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 2m 8.7477sHi. This is the error I am getting. I had installed the simulink for arduino add on for hardware support
And also sort for the COM port issue as mentioned in your web site
### Starting build procedure for: Lab_1_2 "### Generating static library." "F:/waqas/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1" SHELL="%SystemRoot%/system32/cmd.exe" -f avrcore.mk all gmake[1]: Entering directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1′ "### Successfully generated libcore.a library." gmake[1]: Leaving directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1′ "F:/waqas/bin/win64/gmake" -j5 SHELL="%SystemRoot%/system32/cmd.exe" -f "Lab_1_2.mk" all gmake[1]: Entering directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw’ "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-g++" -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include –
IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "MW_arduino_digitalio.o" "C:/ProgramData/MATLAB/SupportPackages/R2023b/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp" "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"xcp_ext_mode.dep" -MT"xcp_ext_mode.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGavr-g++: error: Box/Lab: No such file or directory ER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "xcp_ext_mode.o" "F:/waqas/toolbox/coder/xcp/src/target/ext_mode/src/xcp_ext_mode.c" avr-g++: error: 1.2: No such file or directory avr-g++: error: Box/Lab: No such file or directory avr-g++: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** No rule to make target F:/ACE’, needed by Lab_1_2.o’. Stop. gmake[1]: *** Waiting for unfinished jobs…. gmake[1]: *** [MW_arduino_digitalio.o] Error 1 avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2: No such file or directory avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** [xcp_ext_mode.o] Error 1 gmake[1]: Leaving directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw’ gmake: *** [all] Error 2 The make command returned an error of 2 ### Build procedure for Lab_1_2 aborted due to an error. Build Summary Top model targets built: Model Action Rebuild Reason =================================================================== Lab_1_2 Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 2m 8.7477s Hi. This is the error I am getting. I had installed the simulink for arduino add on for hardware support
And also sort for the COM port issue as mentioned in your web site
### Starting build procedure for: Lab_1_2 "### Generating static library." "F:/waqas/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1" SHELL="%SystemRoot%/system32/cmd.exe" -f avrcore.mk all gmake[1]: Entering directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1′ "### Successfully generated libcore.a library." gmake[1]: Leaving directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1′ "F:/waqas/bin/win64/gmake" -j5 SHELL="%SystemRoot%/system32/cmd.exe" -f "Lab_1_2.mk" all gmake[1]: Entering directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw’ "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-g++" -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include –
IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "MW_arduino_digitalio.o" "C:/ProgramData/MATLAB/SupportPackages/R2023b/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp" "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"xcp_ext_mode.dep" -MT"xcp_ext_mode.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGavr-g++: error: Box/Lab: No such file or directory ER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "xcp_ext_mode.o" "F:/waqas/toolbox/coder/xcp/src/target/ext_mode/src/xcp_ext_mode.c" avr-g++: error: 1.2: No such file or directory avr-g++: error: Box/Lab: No such file or directory avr-g++: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** No rule to make target F:/ACE’, needed by Lab_1_2.o’. Stop. gmake[1]: *** Waiting for unfinished jobs…. gmake[1]: *** [MW_arduino_digitalio.o] Error 1 avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2: No such file or directory avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** [xcp_ext_mode.o] Error 1 gmake[1]: Leaving directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw’ gmake: *** [all] Error 2 The make command returned an error of 2 ### Build procedure for Lab_1_2 aborted due to an error. Build Summary Top model targets built: Model Action Rebuild Reason =================================================================== Lab_1_2 Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 2m 8.7477s arduino MATLAB Answers — New Questions

​

Tags:

Related posts

30 days test version for learning
2025-10-01

30 days test version for learning

Issue with XCP on CAN (F2838x – Simulink External Mode)
2025-10-01

Issue with XCP on CAN (F2838x – Simulink External Mode)

how to debug s functions in Matlab
2025-10-01

how to debug s functions in Matlab

Leave a Reply

Your email address will not be published. Required fields are marked *

Adobe
Google for Education
IBM
Matlab
Microsoft
Wordpress
Visual Paradigm
Opensource

Portal Application Package Repository Telkom University, for internal use only, empower civitas academica in study and research.

Information

Contact Us

Copyright © Telkom University. All Rights Reserved. ch

Secret Link