Need help to correct and modify MATLAB code
I have the following code :
%===============================%
clc
close all;
clear;
% Define the given arrays
x = [0.02 0.55 1.00 1.4 1.4 2.32 2.62 …
3.77 4.81 5.61 6.29 6.29 6.00 …
6.00 7.00 7.00 7.00];
z = [5 5 5 5 5 4 4 4 4 4 4 4 2 2 2 2 2];
% Find sudden changes in depth
sudden_changes = diff(z);
% Find indices where sudden changes occur
fault_indices = find(sudden_changes ~= 0) + 1;
% Plot the top of the rock formation
plot(x, z, ‘-o’);
hold on;
% Plot fault lines
for i = 1:length(fault_indices)
idx = fault_indices(i);
plot([x(idx-1), x(idx)], [z(idx-1), z(idx)], ‘r–‘);
end
% Calculate dip angle using the tan-rule
dip_angles = atand(diff(z) ./ diff(x));
% Identify normal and reverse faults
normal_faults = dip_angles <= 90;
reverse_faults = dip_angles > 90;
% Plot normal faults
scatter(x(fault_indices(normal_faults)), z(fault_indices(normal_faults)), ‘g’, ‘filled’);
% Plot reverse faults
scatter(x(fault_indices(reverse_faults)), z(fault_indices(reverse_faults)), ‘m’, ‘filled’);
% Add labels and legend
xlabel(‘X-axis’);
ylabel(‘Depth’);
title(‘Top of the rock formation with fault lines’);
legend(‘Top of the rock formation’, ‘Fault lines’, ‘Normal faults’, ‘Reverse faults’);
set(gca, ‘YDir’, ‘reverse’);
grid on;
%===============================%
I need to draw the Earth’s surface where the depth is constan surface and equal to zero
and need th extend the the fault lines to the Earths surface as shown in attached figure
and need to detect the type of fault from intersected fault line with Earth’s surfaceI have the following code :
%===============================%
clc
close all;
clear;
% Define the given arrays
x = [0.02 0.55 1.00 1.4 1.4 2.32 2.62 …
3.77 4.81 5.61 6.29 6.29 6.00 …
6.00 7.00 7.00 7.00];
z = [5 5 5 5 5 4 4 4 4 4 4 4 2 2 2 2 2];
% Find sudden changes in depth
sudden_changes = diff(z);
% Find indices where sudden changes occur
fault_indices = find(sudden_changes ~= 0) + 1;
% Plot the top of the rock formation
plot(x, z, ‘-o’);
hold on;
% Plot fault lines
for i = 1:length(fault_indices)
idx = fault_indices(i);
plot([x(idx-1), x(idx)], [z(idx-1), z(idx)], ‘r–‘);
end
% Calculate dip angle using the tan-rule
dip_angles = atand(diff(z) ./ diff(x));
% Identify normal and reverse faults
normal_faults = dip_angles <= 90;
reverse_faults = dip_angles > 90;
% Plot normal faults
scatter(x(fault_indices(normal_faults)), z(fault_indices(normal_faults)), ‘g’, ‘filled’);
% Plot reverse faults
scatter(x(fault_indices(reverse_faults)), z(fault_indices(reverse_faults)), ‘m’, ‘filled’);
% Add labels and legend
xlabel(‘X-axis’);
ylabel(‘Depth’);
title(‘Top of the rock formation with fault lines’);
legend(‘Top of the rock formation’, ‘Fault lines’, ‘Normal faults’, ‘Reverse faults’);
set(gca, ‘YDir’, ‘reverse’);
grid on;
%===============================%
I need to draw the Earth’s surface where the depth is constan surface and equal to zero
and need th extend the the fault lines to the Earths surface as shown in attached figure
and need to detect the type of fault from intersected fault line with Earth’s surface I have the following code :
%===============================%
clc
close all;
clear;
% Define the given arrays
x = [0.02 0.55 1.00 1.4 1.4 2.32 2.62 …
3.77 4.81 5.61 6.29 6.29 6.00 …
6.00 7.00 7.00 7.00];
z = [5 5 5 5 5 4 4 4 4 4 4 4 2 2 2 2 2];
% Find sudden changes in depth
sudden_changes = diff(z);
% Find indices where sudden changes occur
fault_indices = find(sudden_changes ~= 0) + 1;
% Plot the top of the rock formation
plot(x, z, ‘-o’);
hold on;
% Plot fault lines
for i = 1:length(fault_indices)
idx = fault_indices(i);
plot([x(idx-1), x(idx)], [z(idx-1), z(idx)], ‘r–‘);
end
% Calculate dip angle using the tan-rule
dip_angles = atand(diff(z) ./ diff(x));
% Identify normal and reverse faults
normal_faults = dip_angles <= 90;
reverse_faults = dip_angles > 90;
% Plot normal faults
scatter(x(fault_indices(normal_faults)), z(fault_indices(normal_faults)), ‘g’, ‘filled’);
% Plot reverse faults
scatter(x(fault_indices(reverse_faults)), z(fault_indices(reverse_faults)), ‘m’, ‘filled’);
% Add labels and legend
xlabel(‘X-axis’);
ylabel(‘Depth’);
title(‘Top of the rock formation with fault lines’);
legend(‘Top of the rock formation’, ‘Fault lines’, ‘Normal faults’, ‘Reverse faults’);
set(gca, ‘YDir’, ‘reverse’);
grid on;
%===============================%
I need to draw the Earth’s surface where the depth is constan surface and equal to zero
and need th extend the the fault lines to the Earths surface as shown in attached figure
and need to detect the type of fault from intersected fault line with Earth’s surface line, line break MATLAB Answers — New Questions