I’m using R2024a and Embedded Encoder Support Package for Infineon AURIX TC3x Microcontrollers inside the add on.
And using the encoder block and running in KIT_A2G_TC387_5V TFT board ,and use scope to observe the output.
The results and settings are as shown below.
1.hardware setting

2-1 encoder setting

2-2 encoder setting

3.scope setting

4.result
from top to the bottom is count,direction,and rad/s.I’m using R2024a and Embedded Encoder Support Package for Infineon AURIX TC3x Microcontrollers inside the add on.
And using the encoder block and running in KIT_A2G_TC387_5V TFT board ,and use scope to observe the output.
The results and settings are as shown below.
1.hardware setting

2-1 encoder setting

2-2 encoder setting

3.scope setting

4.result
from top to the bottom is count,direction,and rad/s. I’m using R2024a and Embedded Encoder Support Package for Infineon AURIX TC3x Microcontrollers inside the add on.
And using the encoder block and running in KIT_A2G_TC387_5V TFT board ,and use scope to observe the output.
The results and settings are as shown below.
1.hardware setting

2-1 encoder setting

2-2 encoder setting

3.scope setting

4.result
from top to the bottom is count,direction,and rad/s. encoder MATLAB Answers — New Questions

​