Category: News
How to fix QuickBooks Desktop Error 6190 after update window?
Troubleshooting Solutions : QuickBooks Desktop Error 6190
QuickBooks Desktop Error 6190 typically occurs when there’s a mismatch between the company file and the transaction log file. This discrepancy can be caused by various reasons, including network issues, multiple users accessing the file simultaneously, or the company file being located on a server that is not accessible.
Here are some troubleshooting steps to resolve Error 6190:
Single User Mode: Ensure that no other user is accessing the company file. Error 6190 often arises when multiple users try to access the file simultaneously. Ask other users to log out and try accessing the file again.
Copy the File Locally: Copy the company file from the server to the local drive of your system and try opening it. If the file opens without any error, it indicates that the issue may be related to the network or server accessibility.
Use QuickBooks File Doctor: QuickBooks File Doctor is a diagnostic tool provided by Intuit to fix common QuickBooks errors, including Error 6190. Download and run the tool to scan and repair any issues with your company file.
Update QuickBooks: Ensure that your QuickBooks Desktop software is up to date. Sometimes, outdated software can lead to compatibility issues and errors like Error 6190. Update QuickBooks to the latest version available.
Check for Hosting Settings: Verify the hosting settings on all computers accessing the company file. Hosting should be turned off on all workstations except the one hosting the company file. To check hosting settings, go to File > Utilities > Stop Hosting Multi-User Configuration.
Rename .TLG and .ND Files: Renaming the transaction log (.TLG) and network descriptor (.ND) files associated with your company file can sometimes resolve Error 6190. Locate the files with the same name as your company file but with extensions .TLG and .ND. Rename them by adding .old at the end of the file name.
Run Rebuild Data Utility: QuickBooks includes a built-in utility called Rebuild Data, which can fix data integrity issues within the company file. Go to File > Utilities > Rebuild Data and follow the on-screen instructions to run the utility.
Check for Data Corruption: If none of the above steps resolve the issue, there might be data corruption within the company file. In such cases, restoring the company file from a backup or seeking assistance from QuickBooks support may be necessary.
Following these troubleshooting steps should help resolve QuickBooks Desktop Error 6190 and allow you to access your company file without any further issues. If the problem persists, consider contacting QuickBooks support for further assistance.
Troubleshooting Solutions : QuickBooks Desktop Error 6190 QuickBooks Desktop Error 6190 typically occurs when there’s a mismatch between the company file and the transaction log file. This discrepancy can be caused by various reasons, including network issues, multiple users accessing the file simultaneously, or the company file being located on a server that is not accessible. Here are some troubleshooting steps to resolve Error 6190: Single User Mode: Ensure that no other user is accessing the company file. Error 6190 often arises when multiple users try to access the file simultaneously. Ask other users to log out and try accessing the file again.Copy the File Locally: Copy the company file from the server to the local drive of your system and try opening it. If the file opens without any error, it indicates that the issue may be related to the network or server accessibility.Use QuickBooks File Doctor: QuickBooks File Doctor is a diagnostic tool provided by Intuit to fix common QuickBooks errors, including Error 6190. Download and run the tool to scan and repair any issues with your company file.Update QuickBooks: Ensure that your QuickBooks Desktop software is up to date. Sometimes, outdated software can lead to compatibility issues and errors like Error 6190. Update QuickBooks to the latest version available.Check for Hosting Settings: Verify the hosting settings on all computers accessing the company file. Hosting should be turned off on all workstations except the one hosting the company file. To check hosting settings, go to File > Utilities > Stop Hosting Multi-User Configuration.Rename .TLG and .ND Files: Renaming the transaction log (.TLG) and network descriptor (.ND) files associated with your company file can sometimes resolve Error 6190. Locate the files with the same name as your company file but with extensions .TLG and .ND. Rename them by adding .old at the end of the file name.Run Rebuild Data Utility: QuickBooks includes a built-in utility called Rebuild Data, which can fix data integrity issues within the company file. Go to File > Utilities > Rebuild Data and follow the on-screen instructions to run the utility.Check for Data Corruption: If none of the above steps resolve the issue, there might be data corruption within the company file. In such cases, restoring the company file from a backup or seeking assistance from QuickBooks support may be necessary.Following these troubleshooting steps should help resolve QuickBooks Desktop Error 6190 and allow you to access your company file without any further issues. If the problem persists, consider contacting QuickBooks support for further assistance. Read More
Excel Query – Can I restrict shared users from seeing multiple sheet views?
I have just discovered sheet views. I have a central excel document that I need to share with users across 8 different agencies. I plan to create a sheet view to show each user their specific content. However, it appears that they would still be able to select a different sheet view if they chose to do so.
Is there a way I can lock that down so they only see the specific sheet view? eg: Fred should only see the sheet view for Flintstones, not Default and Simpsons as well. Likewise, Marge should only see the Simpsons sheet view, not the Default or Flintstones options.
My current approach of breaking down the document into many smaller copies is not sustainable as I need all the information to come together again in one sheet.
I have just discovered sheet views. I have a central excel document that I need to share with users across 8 different agencies. I plan to create a sheet view to show each user their specific content. However, it appears that they would still be able to select a different sheet view if they chose to do so.Is there a way I can lock that down so they only see the specific sheet view? eg: Fred should only see the sheet view for Flintstones, not Default and Simpsons as well. Likewise, Marge should only see the Simpsons sheet view, not the Default or Flintstones options. My current approach of breaking down the document into many smaller copies is not sustainable as I need all the information to come together again in one sheet. Read More
Links to emails in Microsoft To-Do broken after archiving the email
It worked a few weeks until two weeks ago…
I can drag an Outlook email to the To-Do pane to create a new task. This task reminds me to reply to that email later. The To-Do task then contains a link back to the email. So far so good.
However, if I archive the email, the link to the email in the To-Do task breaks.
When will this work again?
It worked a few weeks until two weeks ago…I can drag an Outlook email to the To-Do pane to create a new task. This task reminds me to reply to that email later. The To-Do task then contains a link back to the email. So far so good. However, if I archive the email, the link to the email in the To-Do task breaks.When will this work again? Read More
Excel VBA – Count Cells with Borders
Hello, I’m looking to create 3 new functions via Excel VBA which solve the following purposes:
1. Count cells that are completely surrounded by borders (Top, bottom, left, and right)
2. Count cells that are completely surrounded by borders, with text in the cell.
3. Count cells that are completely surrounded by borders (Top, bottom, left, and right) that are a certain color (red)
I also need the formula for black and blue, but I’m assuming I can change the “Red” to a different color after.
Thanks for help on any of these formulas. I have very little experience with VBA, and all of my research and code I have written do not work.
Hello, I’m looking to create 3 new functions via Excel VBA which solve the following purposes:1. Count cells that are completely surrounded by borders (Top, bottom, left, and right) 2. Count cells that are completely surrounded by borders, with text in the cell. 3. Count cells that are completely surrounded by borders (Top, bottom, left, and right) that are a certain color (red)I also need the formula for black and blue, but I’m assuming I can change the “Red” to a different color after. Thanks for help on any of these formulas. I have very little experience with VBA, and all of my research and code I have written do not work. Read More
Excel query – External link to specific row in Excel spreadsheet
I have two documents: an external programme table and an Excel spreadsheet. At the moment, my hyperlink in the non-Excel document opens the Excel spreadsheet but places the cursor at the top of the sheet. I would like it to place the cursor at a specific row that corresponds to the table containing the link.
The two documents have a common column called Reference.
Is it possible to hyperlink to a particular row in that sheet from an external programme?
Clarification – Programme means software package.
I have two documents: an external programme table and an Excel spreadsheet. At the moment, my hyperlink in the non-Excel document opens the Excel spreadsheet but places the cursor at the top of the sheet. I would like it to place the cursor at a specific row that corresponds to the table containing the link. The two documents have a common column called Reference. Is it possible to hyperlink to a particular row in that sheet from an external programme? Clarification – Programme means software package. Read More
Tasks are not displayed in Outlook 2019
Tasks are displayed in the overview, but not when searching.
I have created tasks and specific tasks and see them in the overview, but when I search for a task, they do not appear.
The same problem is with the reminder of the task, the tasks appear in the reminder but not when I search specifically for them, then in the best case individual tasks appear but not all tasks linked to them
Aufgaben werden in der Übersicht angezeigt, aber beim Suchen nicht.
Ich habe Aufgaben und Tasks erstellt und sehe diese in der Gesamtübersicht, aber wenn ich nach einer speziellen Aufgabe suche tauchen diese nicht auf.
Das selbe Problem ist bei der Erinnerung der Aufgabe, bei der Erinnerung tauchen die Aufgaben auf aber nicht wenn ich speziell danach suche, dann tauchen im besten Fall einzelne Aufgaben auf aber nicht alle damit verknüpfen Aufgaben
Tasks are displayed in the overview, but not when searching.I have created tasks and specific tasks and see them in the overview, but when I search for a task, they do not appear.The same problem is with the reminder of the task, the tasks appear in the reminder but not when I search specifically for them, then in the best case individual tasks appear but not all tasks linked to themAufgaben werden in der Übersicht angezeigt, aber beim Suchen nicht.Ich habe Aufgaben und Tasks erstellt und sehe diese in der Gesamtübersicht, aber wenn ich nach einer speziellen Aufgabe suche tauchen diese nicht auf.Das selbe Problem ist bei der Erinnerung der Aufgabe, bei der Erinnerung tauchen die Aufgaben auf aber nicht wenn ich speziell danach suche, dann tauchen im besten Fall einzelne Aufgaben auf aber nicht alle damit verknüpfen Aufgaben Read More
USB drive not seen on my Windows 10 PC?
The USB drive name does not show up in Windows Explorer but I can see the device from DiskGenius app. What is the problem with this USB drive?
Thanks
The USB drive name does not show up in Windows Explorer but I can see the device from DiskGenius app. What is the problem with this USB drive? Thanks Read More
Data-driven Analytics for Responsible Business Solutions, a Power BI introduction course:
Everyone is familiar with the movie trope where a rag-tag group of people with unique skills and backgrounds are thrown together to overcome a certain challenge, and succeed. That has been somewhat our experience with Radboud University’s DARBS (Data-driven Analytics for Responsible Business Solutions) course from beginning to end. Although being business administration students, our backgrounds diverged widely. Our backgrounds ranged from entrepreneurship, to organizational design, to system dynamics. Some of us had more work experience, some less. Add to this different cultural backgrounds (think of Vietnam, Romania, Germany and the Netherlands). However, we were similar in our knowledge of data analytics. Most of us had no previous experience with Power BI or the likes (except for superficial knowledge of Excel). We want to share our story with you, in which we will showcase how a hands-on approach to data-analytics software could be introduced in MBA programs.
But before we jump into the details of this course and final project, we would like to introduce our team and our motivations for choosing the DARBS course exploring the possibilities of Power BI and data analytics.
Our Team
Product Owner:@DaanvBrenk
I am finishing my Master’s degree in Organisational Design and Development. Maybe because of my background in the Humanities, I started noticing that more and more people in my environment are dissatisfied with their work nowadays. I think this could be improved, which is why my goal is to create higher quality jobs for people. If I look back on my experience with the DARBS-course, I think the use of Power BI could be complementary to this goal. It could be a powerful wake-up call for people when presented with facts on their way of working, rather than telling them directly. Aside from that, I liked that the course had a hands-on approach to teaching Power BI, which also motivated me to enroll in the course. https://www.linkedin.com/in/daan-van-brenk/
Data Analyst: @Julian_Vriens
I am currently busy finishing my master’s degree in Strategic Management. Having already had experience and classes in data analytics/management, such as with Excel, Power BI, SPSS and Microsoft Access, I knew that following a course to deepen my Power BI skills and learn how to analyze data ethically would be a good fit to further expand my skill set. The DARBS course has allowed me to reach these goals, and I look forward to using these new skills in a professional environment to analyze data ethically. https://www.linkedin.com/in/julian-vriens-810785181/
Data Analyst: @CristianCrk
I am studying Innovation and Entrepreneurship. I have always been interested in having knowledge and working with data, and for this reason I’ve enrolled in the DARBS course. It taught me a big deal about what is possible using Power BI, data collection and data security. I am also passionate about humanity and I believe that with responsible use, data can benefit society by offering knowledge about societal tendencies and human needs, along with ways to reach them. https://www.linkedin.com/in/cristian-ceausescu/
Data Visualization Consultant: @JanicRa
I am in the process of completing my Master’s degree in Organisational Design and Development. Throughout my studies, I have become interested in many topics such as technological development. Therefore choosing an elective exploring Data Analytics with Power BI was certainly the right choice as it not only introduced a great tool for analyzing data and displaying it in a digestible way but also presented the possibility of using AI to predict and think about what data analytics will contribute to society in the future. https://www.linkedin.com/in/janic-rabe/
Data Visualization Consultant: @Thanhnguyen96
I am doing the Master’s Business Analysis and modeling. I have over five years of experience in brand management, working for leading consumer goods companies, such as Reckitt and Nestle. I find it important to use the power of data-driven analytics in decision-making, which led me to the DARBS course. The skills I gained out of this project, I could apply in my future job to get consumer insights, and to facilitate insightfully groundbreaking marketing campaigns. https://www.linkedin.com/in/cong-thanh-nguyen/
Project Overview
The goal of the project was to deliver a final report and video blog for a fictitious company called VenturaGear. The goal was to allow VenturaGear to stay competitive through, as you might have guessed, data-driven business solutions. We would develop our skills in and knowledge of Power BI in the process. For the report, we were asked to provide managerial recommendations to Venturagear. Additionally, our findings had to be backed up by academic sources, and we were also required to reflect on ethical considerations regarding data-use. We had roughly a month to complete this task and upload a video blog on our findings. While the goal was not necessarily to make us into data experts, the course provided us with a strong basis for further skill development. In other words, the course allowed students to work hands-on with Power BI software in seminars. The learning process was also facilitated by weekly assignments that were not necessarily linked to the case, but provided stepping stones in the form of Microsoft modules to engage with the software on a deeper level.
Project Journey
The course had us focused on getting some basic skills with Power BI for the first half of the course duration. After that, all Teams received a “SnapShot” of VenturaGear’s database. Within this database, we were free to explore data between 2011-2014. The overarching goal of our project was to improve the customer experience for VenturaGear while considering and presenting ethical considerations concerning data analytics.
With our newly acquired knowledge on Power BI basics, we first explored the provided data by feeding “interesting” data sheets into PowerQuery and merging some, while forming new relationships between the datasets. Through this rough first exploration, we also discovered data that would not be useful for our sales-focus approach to the project. Additionally, we also came across data that to our understanding could be considered ethically questionable, such as customer skin color.
The next step had us further narrow down the data until we effectively had one Excel file. By compiling all important data into one file, we were able to build dashboards that allow us to show the lack of special offers in the B2C sector. Furthermore, this Excel file would be the basis for our machine learning in which we tried to predict the amount of sales from special offers versus sales without special offers.
The final step was to combine all found insights into a report and present everything in a video blog, which you can watch on this page.
Project Result
We looked at the year 2013 to spot a pattern in monthly sales and found out that there are dips in the months of April, August, and November which go below the average sales. Monthly sales are also lower at the start of the year compared to the rest of the year.
Graph 1: Sales 2013 (Revenue and Quantity)
We have also looked at the special offers and found that the majority is B2B and directed towards retailers, in the form of a volume discount. A new product offer has been implemented for only two models of Touring bikes in May, June and July and a seasonal discount has been implemented for the Sport Helmet in May. As you can see in Graph 2.
Graph 2: Special Offers 2013
We have also found a difference in the products bought throughout different regions. In Europe the order in terms of quantity for the first 3 categories of products is Jerseys, Touring Bikes, Road Bikes. In North America it is Road Bikes, Mountain Bikes, Jerseys while in the Pacific region it is Tires and Tubes, Touring Bikes and Road Bikes. This shows a difference between the customer preference across regions.
Graph 3: Top products per region
By running a machine learning model on the sales data, we tried to understand if the discount of a product and its price determine whether customers buy more of this product. We have found that there is an effect and that products up to $496, and between $978 and $1466 sell better than the rest, and a discount of 8 -12% is also correlated to higher sales. The model displayed an accuracy of 62%, which shows we are not very confident in our prediction, but it signals potential for further investigation and gives an idea for additional special offers.
Graph 4: Machine Learning Discount and Price
Unfortunately, within the VenturaGear data set, we found almost no data on possible B2C discounts which could help in predicting the Sum of OrderQty. In the future maybe after VenturaGear has explored the impact of B2C discounts and collected some data on it, a proper machine learning model can be implemented.
Table 1: Current Discounts
Regarding ethics, we have found the following table in the data, which contains details about individual customers. Here, information about their ethnicity and skin color was gathered, along with income level. We decided not to use this data further in our analysis, as we wanted to avoid any possible ethical dilemmas. Including this data in our machine learning, could have for example predicted that we should focus more on people with light skin color and less on people with dark skin color, obviously discriminating against one group over the other. Another reason why we did not include this information is because data analysts have an obligation to make sure that data is handled responsibly and collected with consent. As we do not know whether VenturaGear asked their customers if it was okay to include such data, our general rule was to leave questionable variables out of analyses.
Table 2: Sensitive Data
Future Development
Further ideas and improvements for our project are as follows. A machine learning model would be required so that the price sensitivity of each product can be seen. In this way the special offers can be applied to certain products in the right proportion. Improving the accuracy of our developed machine learning model predicting orders based on discount and price should be improved in order to display a higher accuracy. If no improvement can be made, investigations of whether the current one can be accepted are necessary. A new measurement of return rate per product is useful to learn about customers, as it can show if they are dissatisfied. Although returns are normal and can have a reason of incompatibility which wasn’t known by buying online, there can be underlying motives that say something about the product itself.
A further analysis into the top 10 product categories bought in different regions can offer further insight on the type of customer demand there is and help determine special offers. A step further can be analyzing the countries and the demand for each country, for specific targeted offers.
Having teams focus on each of the three regions and creating a filtered dataset for each can be helpful to seeing a more detailed picture, and work on a targeted performance solution.
Our next step is studying and obtaining the PL-300 certification and continue learning about data and A.I., also obtaining other certifications. The idea of working within the data analytics community after graduation has certainly been kindled throughout the duration of this course.
Lessons Learned
Data analytics
Before the start of this course, data analytics seemed intimidating to some of us. We were thinking of huge Excel sheets that required an advanced understanding of data analytics to get to a result. Through Power BI, some of us discovered that understanding data analytics was actually manageable and even fun at times through the ability to create understandable and intuitive dashboards from Excel sheets transformed and cleaned in Power Query. For those of us with some experience, it allowed us to gain a deeper understanding of the software and try out additional/ new things.
Teamwork
Due to the scope and general freedom of the project we had to work closely as a team not only to achieve multiple perspectives on data. It also required us to set boundaries for the project as there was rather limited time to complete it. This forced us to really develop as a team and complement each other with our personal insights and skills in order to help each other successfully complete the project. In this light, we also discovered a very helpful online community, from Microsoft blogs to YouTube explaining for example how to design certain graphics through the use of DAX and providing general tips for better designs, etc.
Ethical considerations
Lastly, one of the big lessons we learned is how to analyze and manage data ethically. For example, by only collecting the data that is absolutely necessary (data minimization) and implementing measures to prevent the data from getting leaked/lost (data loss protection). This course and project allowed us to understand that ethical data analytics goes much deeper than we previously expected, and that unexpected harm can be done to people if data is not handled ethically.
Teamwork
The final project of DARBS required that each member take one out of three roles and contribute to the project accordingly. The 3 roles were: Product Owner, Data Analyst, and Data Visualisation Specialist. Considering the scope of this project and our limited experience with Power BI from the beginning we were aware that this would have to be a rather extensive teamwork effort in order to produce a satisfying result. Daan (product owner) made sure to not let the scope of the project get out of hand while always considering ethical implications that we will have to be aware of. The data analysts Cris and Julian had the main task of siphoning through the provided data set and determining, for example, possible problems that might hinder better sales. The data visualization specialists Thanh and Janic ensured that the findings of the data analysts could and would be presented in easily understandable dashboards in addition to creating a video blog. One drawback to the set-up of the course is that even though specific roles were assigned to us, the fact that we all had very limited experience with Power BI meant that we were all learning along the way and discovering new ways of analyzing data throughout the project. This led to our team members supporting each other and taking on multiple roles. In turn, this meant that the roles were mostly fluent throughout our project.
Overall, we believe that teamwork was absolutely essential in completing the project as all of our diverse expertise and perspectives helped us discover interesting aspects of data and ethics that ultimately allowed us to deliver on our task.
Conclusion
One aspect we hope you will remember about our project is that it was a matter of trial and error. If you are to learn about something practical such as developing a mastery of Power BI, get your hands dirty and start experimenting with data. Because this process can be very demanding on the individual, MBA programs could decide to incorporate this learning in a collaborative project. Especially during the early stages of learning, team members are dependent on each other to fill in the gaps of their knowledge, which in our case, provided a sense of ‘we are in this together’. Another aspect to our project is that ethical considerations are inevitably intertwined with data analytics. We tend to separate ‘hard factual data’ from the people who produced it, or whose data is being collected. The impact of this project could be that it allows students (as future business analysts) to think about data while also considering the implications of their use for the outside world and its impact on society.
We believe that, in order for data analytics to have the best benefits for society, certain norms and standards are required. Ethical predicaments can have grave consequences for individuals if rules of privacy are violated or data is wrongly interpreted due to a lack of context. Therefore we highly recommend Power BI users to make use of modules such as Intro to data classification and protection, Fundamentals of Responsible Generative AI and Train a model and debug it with Responsible AI dashboard. While the use of big data and its analysis is an ongoing journey where new ethical pitfalls are constantly being discovered, an obligation for responsible data usage and collection is an absolute necessity. These modules help to understand and build a base of knowledge concerning data protection, transparency, and fairness, which should be at the basis of every data analysis.
Additionally, our team believes that machine learning, if done in a responsible way as introduced throughout the course, has great potential for society. It helps with making better decisions in terms of, for example, customer satisfaction. We recommend the modules Introduction to machine learning and Confusion matrix and data imbalances, as they are a concrete starting point for developing a machine learning model for your own data.
On behalf of Group 3, Thank you for reading our summary and reach out for any questions or recommendations!
Microsoft Tech Community – Latest Blogs –Read More
Cannot read HELP:
Somehow I reset the HELP document images so that I cannoot read it. I am using Mac OS.Somehow I reset the HELP document images so that I cannoot read it. I am using Mac OS. Somehow I reset the HELP document images so that I cannoot read it. I am using Mac OS. restore help document MATLAB Answers — New Questions
What is the best way to zoom this graph so there is no white space?
I can’t seem to figure out the correct command that will change the dimension of the graph so that there is no white space on the right (see attached). Could someone please help me?I can’t seem to figure out the correct command that will change the dimension of the graph so that there is no white space on the right (see attached). Could someone please help me? I can’t seem to figure out the correct command that will change the dimension of the graph so that there is no white space on the right (see attached). Could someone please help me? graph MATLAB Answers — New Questions
Style Templates
MacBook Air M1, Mac OS uptodate, MS Word uptodate….
I wrote my Word document, using styles Normal, Heading1,2 and 3. I now want to customize how my document looks so I changed the style formats in my template file. Saved it. Opened the document file, attached the template file, nothing happened as I wanted and expected. HELP!!!!!!
I modified a template file. Then I opened the document I wm working on and tried tom impose thetemplayte stauyules n the document. Diudn;t work. Please help.
MacBook Air M1, Mac OS uptodate, MS Word uptodate…. I wrote my Word document, using styles Normal, Heading1,2 and 3. I now want to customize how my document looks so I changed the style formats in my template file. Saved it. Opened the document file, attached the template file, nothing happened as I wanted and expected. HELP!!!!!! I modified a template file. Then I opened the document I wm working on and tried tom impose thetemplayte stauyules n the document. Diudn;t work. Please help. Read More
Clarify “The new Microsoft Teams is now generally available” for macOS 14, non work or school.
I have macOS 14.
https://www.microsoft.com/en-us/microsoft-teams/teams-for-home indicates that I can download the free teams app.
This downloads MicrosoftTeams.pkg
When this is run, it says it is installing Microsoft Teams (work or school).
If I let this install, then try to use it, I am unable to sign in because I don’t have a work or school account, just a regular microsoft 365 account.
I have tried to install Classic Teams. This asked me to sign in with my Microsoft account, which I did. WHen I try to connect to ANY meeting, it throws up about 1 dozen browser tabs in about 3 seconds asking me to sign in again. When I sign in again, it tells me that it was unable to sign in and to try again. So Teams Classic of macos doesn’t work any more.
https://www.microsoft.com/en-us/microsoft-teams/download-app needs to be made clear that it is Teams for Work or School and that Teams for Consumers (e.g. home users) are not welcome/supported.
I have macOS 14. https://www.microsoft.com/en-us/microsoft-teams/teams-for-home indicates that I can download the free teams app. This downloads MicrosoftTeams.pkg When this is run, it says it is installing Microsoft Teams (work or school). If I let this install, then try to use it, I am unable to sign in because I don’t have a work or school account, just a regular microsoft 365 account. I have tried to install Classic Teams. This asked me to sign in with my Microsoft account, which I did. WHen I try to connect to ANY meeting, it throws up about 1 dozen browser tabs in about 3 seconds asking me to sign in again. When I sign in again, it tells me that it was unable to sign in and to try again. So Teams Classic of macos doesn’t work any more. https://www.microsoft.com/en-us/microsoft-teams/download-app needs to be made clear that it is Teams for Work or School and that Teams for Consumers (e.g. home users) are not welcome/supported. Read More
How to enter time in a cell using special character
How can I use a character such as T to enter time into a cell? It works in healthcare and in our patient tracking system we can type T and it will enter the date or N to enter the time. I also would like to know is it capable for a cell to change color once the stop time is entered. (This bring awareness that the patient is ready for registration)?
How can I use a character such as T to enter time into a cell? It works in healthcare and in our patient tracking system we can type T and it will enter the date or N to enter the time. I also would like to know is it capable for a cell to change color once the stop time is entered. (This bring awareness that the patient is ready for registration)? Read More
Microsoft Defender endpoint Devices not showing up in onboarding
I have Microsoft Defender for Endpoint Plan 1 subscription. I followed device onboarding guidelines and it’s showing the device onboard in the registry but even after one day it’s not showing in the Microsoft Defender portal.
Kindly help to sort it out.
I have Microsoft Defender for Endpoint Plan 1 subscription. I followed device onboarding guidelines and it’s showing the device onboard in the registry but even after one day it’s not showing in the Microsoft Defender portal.Kindly help to sort it out. Read More
How to fix QuickBooks error 6190 after update window?
Troubleshooting Solutions : QuickBooks error 6190
QuickBooks error 6190 typically occurs when there is a mismatch between the company file and the transaction log file (.TLG). This can happen due to various reasons such as network issues, multiple users accessing the file simultaneously, or discrepancies in file permissions. Below are several troubleshooting steps to resolve this issue:
Update QuickBooks to the Latest Release: Ensure that you are using the latest version of QuickBooks Desktop. Intuit frequently releases updates and patches to fix bugs and errors, including error 6190. Go to the Help menu and select “Update QuickBooks Desktop” to check for and install any available updates.
Run QuickBooks File Doctor: QuickBooks File Doctor is a tool provided by Intuit to diagnose and repair various company file-related issues. Download and run QuickBooks File Doctor from the Intuit website. Follow the prompts to scan and repair your company file. This tool can often fix error 6190 and related issues.
Check for Single User Mode: Ensure that no other user is accessing the company file in Single User Mode. QuickBooks error 6190 can occur if the company file is being accessed in Multi-User Mode while another user tries to access it in Single User Mode. Coordinate with other users to ensure everyone is using the correct mode.
Verify Network Connectivity: Poor network connectivity or interruptions in the connection between the computer hosting the company file and the workstation accessing it can trigger error 6190. Check the network setup and ensure that all devices are properly connected. Consider restarting your router or switching to a wired connection for more stability.
Rename .TLG and .ND Files: Renaming the transaction log file (.TLG) and network data file (.ND) associated with your QuickBooks company file can sometimes resolve error 6190. Navigate to the folder containing your company file, locate the corresponding .TLG and .ND files, and add “.old” to their file names. For example, rename “company_file.qbw.tlg” to “company_file.qbw.tlg.old”. This action prompts QuickBooks to create new log and network data files when you next open the company file.
Use QuickBooks Database Server Manager: QuickBooks Database Server Manager helps manage multi-user access to company files. Run the Database Server Manager on the computer hosting the company file to scan and resolve any issues with file access and permissions. Ensure that the company file folder is listed in the folders monitored by the Database Server Manager.
Restore a Backup: If all else fails, restoring a recent backup of your QuickBooks company file can help resolve error 6190. Choose a backup file created before the error started occurring and restore it using the built-in backup and restore functionality in QuickBooks.
By following these troubleshooting steps, you should be able to resolve QuickBooks error 6190 and regain access to your company file without further issues. If the problem persists, consider contacting QuickBooks support for further assistance and guidance tailored to your specific situation.
Troubleshooting Solutions : QuickBooks error 6190 QuickBooks error 6190 typically occurs when there is a mismatch between the company file and the transaction log file (.TLG). This can happen due to various reasons such as network issues, multiple users accessing the file simultaneously, or discrepancies in file permissions. Below are several troubleshooting steps to resolve this issue: Update QuickBooks to the Latest Release: Ensure that you are using the latest version of QuickBooks Desktop. Intuit frequently releases updates and patches to fix bugs and errors, including error 6190. Go to the Help menu and select “Update QuickBooks Desktop” to check for and install any available updates.Run QuickBooks File Doctor: QuickBooks File Doctor is a tool provided by Intuit to diagnose and repair various company file-related issues. Download and run QuickBooks File Doctor from the Intuit website. Follow the prompts to scan and repair your company file. This tool can often fix error 6190 and related issues.Check for Single User Mode: Ensure that no other user is accessing the company file in Single User Mode. QuickBooks error 6190 can occur if the company file is being accessed in Multi-User Mode while another user tries to access it in Single User Mode. Coordinate with other users to ensure everyone is using the correct mode.Verify Network Connectivity: Poor network connectivity or interruptions in the connection between the computer hosting the company file and the workstation accessing it can trigger error 6190. Check the network setup and ensure that all devices are properly connected. Consider restarting your router or switching to a wired connection for more stability.Rename .TLG and .ND Files: Renaming the transaction log file (.TLG) and network data file (.ND) associated with your QuickBooks company file can sometimes resolve error 6190. Navigate to the folder containing your company file, locate the corresponding .TLG and .ND files, and add “.old” to their file names. For example, rename “company_file.qbw.tlg” to “company_file.qbw.tlg.old”. This action prompts QuickBooks to create new log and network data files when you next open the company file.Use QuickBooks Database Server Manager: QuickBooks Database Server Manager helps manage multi-user access to company files. Run the Database Server Manager on the computer hosting the company file to scan and resolve any issues with file access and permissions. Ensure that the company file folder is listed in the folders monitored by the Database Server Manager.Restore a Backup: If all else fails, restoring a recent backup of your QuickBooks company file can help resolve error 6190. Choose a backup file created before the error started occurring and restore it using the built-in backup and restore functionality in QuickBooks. By following these troubleshooting steps, you should be able to resolve QuickBooks error 6190 and regain access to your company file without further issues. If the problem persists, consider contacting QuickBooks support for further assistance and guidance tailored to your specific situation. Read More
2d stl import from solidworks
Hello i have a geometry for structural analysis in PDE. The problem is that i want to import 2d stl file but my model that is from solidworks cant export in 2d stlHello i have a geometry for structural analysis in PDE. The problem is that i want to import 2d stl file but my model that is from solidworks cant export in 2d stl Hello i have a geometry for structural analysis in PDE. The problem is that i want to import 2d stl file but my model that is from solidworks cant export in 2d stl pde, stl, solidworks MATLAB Answers — New Questions
How to plot correctly errorbars on grouped bar plot?
Hello everyone,
I am using a livescript to present some data.. data is a 4×7 matrix, so nbars is 4, ngroups is 7
figure
labels = categorical({‘Mental Demand’ ‘Physical Demand’ ‘Temporal Demand’ ‘Performance’, ‘Effort’, ‘Frustration’, ‘Overall’});
b=bar(labels’,data’);
title(‘RAW NASA TLX’);
box off
hold on
% Calculate the number of groups and number of bars in each group
[ngroups,nbars] = size(data’);
% Get the x coordinate of the bars
x = nan(nbars,ngroups);
for i = 1:nbars
x(i,:) = b(i).XEndPoints;
end
% Plot the errorbars
errorbar(x’,data’,error’,’k’,’linestyle’,’none’);
hold off
legendText = cell(1, numel(A));
for i = 1:numel(A)
cameraType = A{i};
legendText{i} = cameraType;
end
legend(legendText);
The resulting plot in the livescript is wrong: all the errorbars are in the center of each of the respective group
But if I put the same code in the command window the plot is correct
Can you explain me what is going on?
I am sure that I am doing something wrong but I can not understand why (I took the errorbar part from some code online, it seems right to me but idk…)Hello everyone,
I am using a livescript to present some data.. data is a 4×7 matrix, so nbars is 4, ngroups is 7
figure
labels = categorical({‘Mental Demand’ ‘Physical Demand’ ‘Temporal Demand’ ‘Performance’, ‘Effort’, ‘Frustration’, ‘Overall’});
b=bar(labels’,data’);
title(‘RAW NASA TLX’);
box off
hold on
% Calculate the number of groups and number of bars in each group
[ngroups,nbars] = size(data’);
% Get the x coordinate of the bars
x = nan(nbars,ngroups);
for i = 1:nbars
x(i,:) = b(i).XEndPoints;
end
% Plot the errorbars
errorbar(x’,data’,error’,’k’,’linestyle’,’none’);
hold off
legendText = cell(1, numel(A));
for i = 1:numel(A)
cameraType = A{i};
legendText{i} = cameraType;
end
legend(legendText);
The resulting plot in the livescript is wrong: all the errorbars are in the center of each of the respective group
But if I put the same code in the command window the plot is correct
Can you explain me what is going on?
I am sure that I am doing something wrong but I can not understand why (I took the errorbar part from some code online, it seems right to me but idk…) Hello everyone,
I am using a livescript to present some data.. data is a 4×7 matrix, so nbars is 4, ngroups is 7
figure
labels = categorical({‘Mental Demand’ ‘Physical Demand’ ‘Temporal Demand’ ‘Performance’, ‘Effort’, ‘Frustration’, ‘Overall’});
b=bar(labels’,data’);
title(‘RAW NASA TLX’);
box off
hold on
% Calculate the number of groups and number of bars in each group
[ngroups,nbars] = size(data’);
% Get the x coordinate of the bars
x = nan(nbars,ngroups);
for i = 1:nbars
x(i,:) = b(i).XEndPoints;
end
% Plot the errorbars
errorbar(x’,data’,error’,’k’,’linestyle’,’none’);
hold off
legendText = cell(1, numel(A));
for i = 1:numel(A)
cameraType = A{i};
legendText{i} = cameraType;
end
legend(legendText);
The resulting plot in the livescript is wrong: all the errorbars are in the center of each of the respective group
But if I put the same code in the command window the plot is correct
Can you explain me what is going on?
I am sure that I am doing something wrong but I can not understand why (I took the errorbar part from some code online, it seems right to me but idk…) bar, errorbar, grouped MATLAB Answers — New Questions
Can’t Install Windows 10 on my old PC
It is an old PC with BIOS boot available only. All I get is the installation where it shows the Microsoft flag and that’s it. I left the system like this and came back 8 hours later and still like this. So digging around I saw a part about turning off the vt in the BIOS so I did that, but same thing. I tried different versions of Rufus and still same thing.
Thank you
It is an old PC with BIOS boot available only. All I get is the installation where it shows the Microsoft flag and that’s it. I left the system like this and came back 8 hours later and still like this. So digging around I saw a part about turning off the vt in the BIOS so I did that, but same thing. I tried different versions of Rufus and still same thing. Thank you Read More
Lock screen crashes occurring on multiple systems that require a forced power cycle to recover
I have multiple windows 11 23H2 systems that exhibit the same behaviour of the lock screen process, alongside searchapp, crashing after the displays have gone to sleep, they run different hardware and drivers so its not specific to that, this seems to be a very specific bug with windows 11 itself.
This is a very severe problem that I need a proper solution to, and disabling screen sleep behaviour doesn’t work as selecting the “never” option will just revert it back to the 15 minutes option.
Using ctrl+win+shift+B to reset the drivers does nothing, since the drivers themselves have not crashed, so it will simply just sit on all screens being black and the lock screen process will never be restarted, which is an additional windows fault of itself since it should always ensure that the process is running even after a crash.
The current crash events I see in event viewer are;
“The program SearchHost.exe version 624.7505.30.0 stopped interacting with Windows and was closed.”
followed by
“The program LockApp.exe version 10.0.22621.3527 stopped interacting with Windows and was closed.”
and about 12 events of WindowsBlackScreenDiagnosticsV1 and LiveKernelEvent, sometimes the search and lock events are printed repeatedly and sometimes they are just singular, its unknown if the other events are specific to forcing driver resets.
Microsoft support told me directly to report these bugs here, and I already reported the bugs via feedback hub before contacting them, but as is usual I never see anything critical in the feedback hub ever fixed…
I have multiple windows 11 23H2 systems that exhibit the same behaviour of the lock screen process, alongside searchapp, crashing after the displays have gone to sleep, they run different hardware and drivers so its not specific to that, this seems to be a very specific bug with windows 11 itself.This is a very severe problem that I need a proper solution to, and disabling screen sleep behaviour doesn’t work as selecting the “never” option will just revert it back to the 15 minutes option.Using ctrl+win+shift+B to reset the drivers does nothing, since the drivers themselves have not crashed, so it will simply just sit on all screens being black and the lock screen process will never be restarted, which is an additional windows fault of itself since it should always ensure that the process is running even after a crash.The current crash events I see in event viewer are;”The program SearchHost.exe version 624.7505.30.0 stopped interacting with Windows and was closed.”followed by”The program LockApp.exe version 10.0.22621.3527 stopped interacting with Windows and was closed.”and about 12 events of WindowsBlackScreenDiagnosticsV1 and LiveKernelEvent, sometimes the search and lock events are printed repeatedly and sometimes they are just singular, its unknown if the other events are specific to forcing driver resets.Microsoft support told me directly to report these bugs here, and I already reported the bugs via feedback hub before contacting them, but as is usual I never see anything critical in the feedback hub ever fixed… Read More
back office calendar not showing available dates and times, only company times
In the back office calendar, not only the slots available for services are available, but all times.
Booked Appointments are showing correctly and eventually company opening hours are evidenced, but I’m not able to visualize only service related available slots, while, public calendar /booking page is showing correct slots
can anyone help?
In the back office calendar, not only the slots available for services are available, but all times.Booked Appointments are showing correctly and eventually company opening hours are evidenced, but I’m not able to visualize only service related available slots, while, public calendar /booking page is showing correct slotscan anyone help? Read More