Category: News
Error trying to start Simulink from m-file.
In an SImulink model I had two scripts as my Model initializaiton functions (those are called "Achs-Data" and "Init_Sim"). I need to write a new script which runs those two scripts (so I get the variables I need to run Simulink in the workspace) and then starts the simulation. (I can’t keep them as the InitFcn’s because after the simulation finishes some parameters should be changed an the simulations has to be repeated).
So if i start those scripts in my new script by calling their names (which gets the parameters to the workspace as I want it to be) an then start the Simulation with sim(‘Gelenkmodell’) an error occurs. ("Reibkennlinie_festlegen" is the name of my new script; ‘Gelenkmodell’ the name of the Simulink model)
How can i avoid this error? Respectively what might me the source of the error?
Sorry if my question is inaccurate, I am pretty new to Matlab.
Error using Reibkennlinie_festlegen (line 17)
Error evaluating ‘InitFcn’ callback of block_diagram ‘Gelenkmodell’.
Callback string is ‘Reibkennlinie_festlegen;’
Caused by:
Error using Reibkennlinie_festlegen (line 17)
Cannot start a new command line simulation while an update diagram or a simulation has started for
the same modelIn an SImulink model I had two scripts as my Model initializaiton functions (those are called "Achs-Data" and "Init_Sim"). I need to write a new script which runs those two scripts (so I get the variables I need to run Simulink in the workspace) and then starts the simulation. (I can’t keep them as the InitFcn’s because after the simulation finishes some parameters should be changed an the simulations has to be repeated).
So if i start those scripts in my new script by calling their names (which gets the parameters to the workspace as I want it to be) an then start the Simulation with sim(‘Gelenkmodell’) an error occurs. ("Reibkennlinie_festlegen" is the name of my new script; ‘Gelenkmodell’ the name of the Simulink model)
How can i avoid this error? Respectively what might me the source of the error?
Sorry if my question is inaccurate, I am pretty new to Matlab.
Error using Reibkennlinie_festlegen (line 17)
Error evaluating ‘InitFcn’ callback of block_diagram ‘Gelenkmodell’.
Callback string is ‘Reibkennlinie_festlegen;’
Caused by:
Error using Reibkennlinie_festlegen (line 17)
Cannot start a new command line simulation while an update diagram or a simulation has started for
the same model In an SImulink model I had two scripts as my Model initializaiton functions (those are called "Achs-Data" and "Init_Sim"). I need to write a new script which runs those two scripts (so I get the variables I need to run Simulink in the workspace) and then starts the simulation. (I can’t keep them as the InitFcn’s because after the simulation finishes some parameters should be changed an the simulations has to be repeated).
So if i start those scripts in my new script by calling their names (which gets the parameters to the workspace as I want it to be) an then start the Simulation with sim(‘Gelenkmodell’) an error occurs. ("Reibkennlinie_festlegen" is the name of my new script; ‘Gelenkmodell’ the name of the Simulink model)
How can i avoid this error? Respectively what might me the source of the error?
Sorry if my question is inaccurate, I am pretty new to Matlab.
Error using Reibkennlinie_festlegen (line 17)
Error evaluating ‘InitFcn’ callback of block_diagram ‘Gelenkmodell’.
Callback string is ‘Reibkennlinie_festlegen;’
Caused by:
Error using Reibkennlinie_festlegen (line 17)
Cannot start a new command line simulation while an update diagram or a simulation has started for
the same model simulink, callback-function, initfcn MATLAB Answers — New Questions
Issue with multiple windows of crashed program appearing. Any fix?
After trying to launch steam this happened. Let me know if you know any solutions for it, thank you.
After trying to launch steam this happened. Let me know if you know any solutions for it, thank you. Read More
The ‘Checked out by’ column is not available in Document library
I need to make the ‘Checked out by’ column visible in my SharePoint document library but it is not available for selection.
I tried switching to the classic experience experience the same issue.
Does anyone know how to resolve this issue?
Here is what I see.
Regards,
Jayne
I need to make the ‘Checked out by’ column visible in my SharePoint document library but it is not available for selection.I tried switching to the classic experience experience the same issue.Does anyone know how to resolve this issue? Here is what I see. Regards,Jayne Read More
Can’t re-activate Windows after a BIOS update
After updating my gigabyte z790 aorus elite ax motherboard to the latest BIOS April update, I can no longer activate Windows. When I do the hardware change option under troubleshoot, I get the below message:
I purchased Windows last year. I have talked with Microsoft support, they did a number of CMD command line changes and an in-place update (reinstall of Windows) and none of these worked. They directed me here. In total, I spent 3 hours chatting with them and never got it addressed. I do not want to pay for Windows again. Thanks for the help in advance.
After updating my gigabyte z790 aorus elite ax motherboard to the latest BIOS April update, I can no longer activate Windows. When I do the hardware change option under troubleshoot, I get the below message:I purchased Windows last year. I have talked with Microsoft support, they did a number of CMD command line changes and an in-place update (reinstall of Windows) and none of these worked. They directed me here. In total, I spent 3 hours chatting with them and never got it addressed. I do not want to pay for Windows again. Thanks for the help in advance. Read More
Running SQLserver as a Role. Where are the tables and tmp disk stored on a bare metal server
We are currently running stand alone SQLserver as a role on a Server 2019 instance. Would like to migrate to a Hyper-V VM to make it more portable. Need to know where the tables and tmp disk are currently stored.
We are currently running stand alone SQLserver as a role on a Server 2019 instance. Would like to migrate to a Hyper-V VM to make it more portable. Need to know where the tables and tmp disk are currently stored. Read More
Trying to count unique items from a data set with multiple conditions
Hi,
I just joined this community and looking for some help! I have a set of data from which I am trying to count unique items under certain categories. For example, there are multiple categories and under each of these categories, there are different items. I am trying to count how many unique items are under each category. I tried to combine COUNTIF and UNIQUE functions, but unfortunately not getting the result. What should be the best way to get a correct count of unique items under each category? Any help will be hugely appreciated!
Here is an example of the data set I have:
VendorProductDescriptionRef/serial NbrReasonRcvd DateCategoryAQF1Q44PRODUCT Q TW11831010/19/2021ACCAQF1Q44PRODUCT Q TW11841010/19/2021ACCAQF1Q22PRODUCT Q – FL11851010/19/2021ACCAQF1Q22PRODUCT Q – FL11861010/19/2021ACCAQF1Q22PRODUCT Q – FL11871010/19/2021ACCAQF1Q22PRODUCT Q – FL12621012/23/2022ACCAQF1Q23PRODUCT Q – QN12631012/23/2022BBBAQF1Q23PRODUCT Q – QN56811010/12/2022BBBAQF1Q23PRODUCT Q – QN11391303/03/2013BBBAQF1Q23PRODUCT Q – QN43441302/24/2016BBBAQF1Q23PRODUCT Q – QN43451302/24/2016BBBAQF2Q37PRODUCT Q – KG52681303/16/2023DDDAQF2Q37PRODUCT Q – KG23341306/27/2013DDDAQF2Q37PRODUCT Q – KG23381306/27/2013DDDAQF2Q37PRODUCT Q – KG23391306/27/2013DDDAQF2Q37PRODUCT Q – KG23401306/27/2013DDDAQF2Q37PRODUCT Q – KG23411306/27/2013DDDAQF1B03PRODUCT AQ – FL23432606/27/2013EEEAQF1B03PRODUCT AQ – FL23502607/02/2013EEEAQF1B03PRODUCT AQ – FL23512607/02/2013EEEAQF1B03PRODUCT AQ – FL23522607/02/2013EEEAQF1B03PRODUCT AQ – FL23532607/02/2013EEEAQF1B03PRODUCT AQ – FL23542607/02/2013EEEAQF2F04PRODUCT AQ – TW23553707/02/2013AAAAQF2F04PRODUCT AQ – TW23563707/02/2013AAAAQF2F04PRODUCT AQ – TW23573707/02/2013AAAAQF2F04PRODUCT AQ – TW23583707/02/2013AAAAQF2F04PRODUCT AQ – TW23593707/02/2013AAAAQF2F04PRODUCT AQ – TW23603707/02/2013AAAAQF2F04PRODUCT AQ – TW23613707/02/2013AAAAQF2C22PRODUCT AQ – KG23922607/11/2013BBBAQF2C22PRODUCT AQ – KG23932607/11/2013BBBAQF2C22PRODUCT AQ – KG23942607/11/2013BBBAQF2C22PRODUCT AQ – KG23992607/11/2013BBBAQF2C22PRODUCT AQ – KG24012607/11/2013BBBAQF2C22PRODUCT AQ – KG24022607/11/2013BBBABC1T22PRODUCT T – KG24035007/11/2013ACCABC1T22PRODUCT T – KG24045007/11/2013ACCABC1T22PRODUCT T – KG24055007/11/2013ACCABC1T22PRODUCT T – KG24065007/11/2013ACCABC2T32PRODUCT T – QN24095507/11/2013ACCABC2T32PRODUCT T – QN24105507/11/2013ACCABC2T32PRODUCT T – QN24115507/11/2013ACCABC2T32PRODUCT T – QN24125507/11/2013ACCDEF1A03PRODUCT A – QN918185011/27/2023DDDDEF1A03PRODUCT A – QN918195011/27/2023DDDDEF1A03PRODUCT A – QN918205011/27/2023DDDDEF1A03PRODUCT A – QN918215011/27/2023DDDDEF4A04PRODUCT A – FL918226011/27/2023EEEDEF4A04PRODUCT A – FL918236011/27/2023EEEDEF4A04PRODUCT A – FL918246011/27/2023EEEDEF4A04PRODUCT A – FL918256011/27/2023EEEDEF4A04PRODUCT A – FL918266011/27/2023EEEDEF4A04PRODUCT A – FL918276011/27/2023EEEGHI1R01PRODUCT R – TW918287711/27/2023ACCGHI1R01PRODUCT R – TW918297711/27/2023ACCGHI1R01PRODUCT R – TW918307711/27/2023ACCGHI1R01PRODUCT R – TW918317711/27/2023ACCGHI1R01PRODUCT R – TW918327711/27/2023ACCGHI3S03PRODUCT S – FL959051412/30/2023BBBGHI3S03PRODUCT S – FL959061412/30/2023BBBGHI3S03PRODUCT S – FL959071412/30/2023BBBGHI3S03PRODUCT S – FL959081412/30/2023BBBGHI3S03PRODUCT S – FL959091412/30/2023BBBGHI3S03PRODUCT S – FL959101412/30/2023BBBGHI3S03PRODUCT S – FL959111412/30/2023BBB
Hi, I just joined this community and looking for some help! I have a set of data from which I am trying to count unique items under certain categories. For example, there are multiple categories and under each of these categories, there are different items. I am trying to count how many unique items are under each category. I tried to combine COUNTIF and UNIQUE functions, but unfortunately not getting the result. What should be the best way to get a correct count of unique items under each category? Any help will be hugely appreciated! Here is an example of the data set I have: VendorProductDescriptionRef/serial NbrReasonRcvd DateCategoryAQF1Q44PRODUCT Q TW11831010/19/2021ACCAQF1Q44PRODUCT Q TW11841010/19/2021ACCAQF1Q22PRODUCT Q – FL11851010/19/2021ACCAQF1Q22PRODUCT Q – FL11861010/19/2021ACCAQF1Q22PRODUCT Q – FL11871010/19/2021ACCAQF1Q22PRODUCT Q – FL12621012/23/2022ACCAQF1Q23PRODUCT Q – QN12631012/23/2022BBBAQF1Q23PRODUCT Q – QN56811010/12/2022BBBAQF1Q23PRODUCT Q – QN11391303/03/2013BBBAQF1Q23PRODUCT Q – QN43441302/24/2016BBBAQF1Q23PRODUCT Q – QN43451302/24/2016BBBAQF2Q37PRODUCT Q – KG52681303/16/2023DDDAQF2Q37PRODUCT Q – KG23341306/27/2013DDDAQF2Q37PRODUCT Q – KG23381306/27/2013DDDAQF2Q37PRODUCT Q – KG23391306/27/2013DDDAQF2Q37PRODUCT Q – KG23401306/27/2013DDDAQF2Q37PRODUCT Q – KG23411306/27/2013DDDAQF1B03PRODUCT AQ – FL23432606/27/2013EEEAQF1B03PRODUCT AQ – FL23502607/02/2013EEEAQF1B03PRODUCT AQ – FL23512607/02/2013EEEAQF1B03PRODUCT AQ – FL23522607/02/2013EEEAQF1B03PRODUCT AQ – FL23532607/02/2013EEEAQF1B03PRODUCT AQ – FL23542607/02/2013EEEAQF2F04PRODUCT AQ – TW23553707/02/2013AAAAQF2F04PRODUCT AQ – TW23563707/02/2013AAAAQF2F04PRODUCT AQ – TW23573707/02/2013AAAAQF2F04PRODUCT AQ – TW23583707/02/2013AAAAQF2F04PRODUCT AQ – TW23593707/02/2013AAAAQF2F04PRODUCT AQ – TW23603707/02/2013AAAAQF2F04PRODUCT AQ – TW23613707/02/2013AAAAQF2C22PRODUCT AQ – KG23922607/11/2013BBBAQF2C22PRODUCT AQ – KG23932607/11/2013BBBAQF2C22PRODUCT AQ – KG23942607/11/2013BBBAQF2C22PRODUCT AQ – KG23992607/11/2013BBBAQF2C22PRODUCT AQ – KG24012607/11/2013BBBAQF2C22PRODUCT AQ – KG24022607/11/2013BBBABC1T22PRODUCT T – KG24035007/11/2013ACCABC1T22PRODUCT T – KG24045007/11/2013ACCABC1T22PRODUCT T – KG24055007/11/2013ACCABC1T22PRODUCT T – KG24065007/11/2013ACCABC2T32PRODUCT T – QN24095507/11/2013ACCABC2T32PRODUCT T – QN24105507/11/2013ACCABC2T32PRODUCT T – QN24115507/11/2013ACCABC2T32PRODUCT T – QN24125507/11/2013ACCDEF1A03PRODUCT A – QN918185011/27/2023DDDDEF1A03PRODUCT A – QN918195011/27/2023DDDDEF1A03PRODUCT A – QN918205011/27/2023DDDDEF1A03PRODUCT A – QN918215011/27/2023DDDDEF4A04PRODUCT A – FL918226011/27/2023EEEDEF4A04PRODUCT A – FL918236011/27/2023EEEDEF4A04PRODUCT A – FL918246011/27/2023EEEDEF4A04PRODUCT A – FL918256011/27/2023EEEDEF4A04PRODUCT A – FL918266011/27/2023EEEDEF4A04PRODUCT A – FL918276011/27/2023EEEGHI1R01PRODUCT R – TW918287711/27/2023ACCGHI1R01PRODUCT R – TW918297711/27/2023ACCGHI1R01PRODUCT R – TW918307711/27/2023ACCGHI1R01PRODUCT R – TW918317711/27/2023ACCGHI1R01PRODUCT R – TW918327711/27/2023ACCGHI3S03PRODUCT S – FL959051412/30/2023BBBGHI3S03PRODUCT S – FL959061412/30/2023BBBGHI3S03PRODUCT S – FL959071412/30/2023BBBGHI3S03PRODUCT S – FL959081412/30/2023BBBGHI3S03PRODUCT S – FL959091412/30/2023BBBGHI3S03PRODUCT S – FL959101412/30/2023BBBGHI3S03PRODUCT S – FL959111412/30/2023BBB Read More
Joining a Teams call from a virtual machine.
Hello,
Our users on Windows AVD cannot join a call that they answer from their mobile device.
In standard windows 10 and 11 a banner pops up when you answer a call from teams your mobile device that allows you to transfer to teams on your pc or join the pc to the call. This banner does not show up on Teams for VDI.
Thank you,
Bort
Hello, Our users on Windows AVD cannot join a call that they answer from their mobile device. In standard windows 10 and 11 a banner pops up when you answer a call from teams your mobile device that allows you to transfer to teams on your pc or join the pc to the call. This banner does not show up on Teams for VDI. Thank you,Bort Read More
Viva glint integration
Hi
Are there are any third party integration possible with Viva Glint? Can we integrate qualtrics?
Hi Are there are any third party integration possible with Viva Glint? Can we integrate qualtrics? Read More
Best way to segregate certain rows into each of their own worksheet from a primary
What would be the best way to take a single worksheet that contains multiple “record types” and copy them into their own worksheet?
The idea is to take each record type and create a copy of those in this spreadsheet into another. In this example, there would be the main sheet (shown) and 4 new sheets containing each of the rows for a record type. (Pivot table?)
What would be the best way to take a single worksheet that contains multiple “record types” and copy them into their own worksheet?The idea is to take each record type and create a copy of those in this spreadsheet into another. In this example, there would be the main sheet (shown) and 4 new sheets containing each of the rows for a record type. (Pivot table?) Read More
Azure Lab Services (Lab Account) – Planned Outage – May 24th, 2024
Dear Users,
We will be updating the Lab Account service on May 24th, 2024, from 1PM to 11PM UTC. During this time, please expect downtime affecting common operations. The service will be fully operational after the updates are applied.
We’ll promptly remove the maintenance banner upon completion of the maintenance task. Your patience and cooperation are highly appreciated.
– Lab Services team.
Microsoft Tech Community – Latest Blogs –Read More
LeVar Burton joins Vasu Jakkal to share his hope for transformative technologies like generative AI
LeVar Burton—known for his role as Chief Engineer Geordi La Forge in Star Trek and as the host and executive producer of the beloved PBS children’s series Reading Rainbow—recently sat down for a one-on-one chat with CVP of Microsoft Security, Vasu Jakkal, to discuss the impact of generative AI on our world.
The conversation began with a discussion of the impact of Star Trek on both speakers’ lives. Burton spoke about how seeing actress Nichelle Nichols on the bridge of the USS Enterprise meant the world to him, as it showed him what creator Gene Roddenberry said was true: “When the future came, there would be a place for me.” Jakkal shared how Star Trek was a pivotal influence in her childhood and is in part responsible for her career in cybersecurity. “Star Trek is a perfect example of what we imagine is what we create in this realm. Human beings, we are manifesting machines,” said Burton. “And Star Trek has been responsible for helping to sow the seeds of germination for a lot of different technologies that are in use in our everyday lives today.”
Generative AI (GenAI) is the transformational technology of our generation. So, we asked LeVar Burton—one of the world’s foremost storytellers and champions of learning through his work in Reading Rainbow —to help us tell the story of how GenAI will improve education and opportunities for everyone across the globe. In addition to reshaping our everyday lives, our emails, and meetings, GenAI is changing how security work gets done. These new solutions—like Microsoft Copilot for Security—help SecOps professionals make sense of large amounts of data at machine speed. They simplify the complex to help defenders find a needle in the haystack, or even a specific needle in a needle stack. Jakkal also discussed how AI can help reduce the talent shortage in the security industry and make it more diverse.
The Microsoft mission is to empower every person and organization in the world to achieve more. And the security mission is to build a safer world for all. Burton expressed his hope that generative AI will help in ways that we haven’t thought of before, referencing the cultural shift that happened in just eight nights when the groundbreaking television miniseries Roots aired. “My hope, my prayer is that generative AI can help us educate our kids in ways that we haven’t been able to and perhaps haven’t even thought of,” stated Burton. He also emphasized the importance of making GenAI safe and accessible to all. Jakkal agreed, touching on the importance of responsibility when using AI, mentioning the Microsoft responsible AI framework—a set of steps to ensure AI systems uphold six principles: fairness, reliability and safety, privacy and security, inclusiveness, transparency, and accountability.
Central to the conversation was the concept of hope, and hope for the future. Burton said the younger generation gives him hope, as they see the world and technology in a different way. Jakkal expressed her hope that we can use GenAI to change the world in a good way, by working together and being responsible. Jakkal closed the discussion by saying “I think collectively together we have to use generative AI and the technologies that we have to change this course. Storytelling, the narrative to change the narrative to one of optimism, to one of hope, to one of inclusion… for all and done by all.”
Watch the full video here:
Microsoft Tech Community – Latest Blogs –Read More
How can I call satelliteScenarioViewer() by using Simulink (only)
I try the Aerospace Blockset from
mdl = "SpacecraftDynamicsBlockExampleModel";
open_system(mdl);
and Aerospace Toolbox from satelliteScenarioViewer
Finally, I see the combination of two systems from
openExample(‘aero_satcom/CustomSatelliteAttitudeAndGimbalSteeringExample’)
Now, I want to call the function satelliteScenarioViewer in the Simulink and don’t use MATLAB part (command window and script)
Is this method possible by using MATLAB system, MATLAB function block or any?
Thank youI try the Aerospace Blockset from
mdl = "SpacecraftDynamicsBlockExampleModel";
open_system(mdl);
and Aerospace Toolbox from satelliteScenarioViewer
Finally, I see the combination of two systems from
openExample(‘aero_satcom/CustomSatelliteAttitudeAndGimbalSteeringExample’)
Now, I want to call the function satelliteScenarioViewer in the Simulink and don’t use MATLAB part (command window and script)
Is this method possible by using MATLAB system, MATLAB function block or any?
Thank you I try the Aerospace Blockset from
mdl = "SpacecraftDynamicsBlockExampleModel";
open_system(mdl);
and Aerospace Toolbox from satelliteScenarioViewer
Finally, I see the combination of two systems from
openExample(‘aero_satcom/CustomSatelliteAttitudeAndGimbalSteeringExample’)
Now, I want to call the function satelliteScenarioViewer in the Simulink and don’t use MATLAB part (command window and script)
Is this method possible by using MATLAB system, MATLAB function block or any?
Thank you matlab, simulink, simulation MATLAB Answers — New Questions
By following the textbook we use in class, modify the function ‘Gauss()’ into a function ‘Gaussj()’ that implements Gauss- Jordan elimination algorithm.
By following the textbook we use in class, modify the function ‘Gauss()’ into a function ‘Gaussj()’ that implements Gauss- Jordan elimination algorithm.The textbook we use is APPLIED NUMERICAL METHODS USING MATLAB
Won Young Yang
Chung-Ang University, Korea
Wenwu Cao
Pennsylvania State University
Tae-Sang Chung
Chung-Ang University, Korea
John Morris
The University of Auckland, New ZealandBy following the textbook we use in class, modify the function ‘Gauss()’ into a function ‘Gaussj()’ that implements Gauss- Jordan elimination algorithm.The textbook we use is APPLIED NUMERICAL METHODS USING MATLAB
Won Young Yang
Chung-Ang University, Korea
Wenwu Cao
Pennsylvania State University
Tae-Sang Chung
Chung-Ang University, Korea
John Morris
The University of Auckland, New Zealand By following the textbook we use in class, modify the function ‘Gauss()’ into a function ‘Gaussj()’ that implements Gauss- Jordan elimination algorithm.The textbook we use is APPLIED NUMERICAL METHODS USING MATLAB
Won Young Yang
Chung-Ang University, Korea
Wenwu Cao
Pennsylvania State University
Tae-Sang Chung
Chung-Ang University, Korea
John Morris
The University of Auckland, New Zealand matlab MATLAB Answers — New Questions
One drive encryption
Hello, I was wondering what ways can you password protect a folder that allows oneDrive to sync the files.
Hello, I was wondering what ways can you password protect a folder that allows oneDrive to sync the files. Read More
Highlighting a part of a row based on 1 cell
Hi all, I know that you can’t create a checklist in excel online so I’m trying this as an alternative.
I’d like to highlight columns H to L if the cell in column I contains Y (or YES if needed). Can you help with the exact formula and what cells I need to highlight please?
If I need to highlight the whole row instead then I’m happy to do that as an alternative.
Hi all, I know that you can’t create a checklist in excel online so I’m trying this as an alternative.I’d like to highlight columns H to L if the cell in column I contains Y (or YES if needed). Can you help with the exact formula and what cells I need to highlight please? If I need to highlight the whole row instead then I’m happy to do that as an alternative. Read More
Prohibit the deletion of a room reservation from the room calendar
Hello, we have just put into production the provision of rooms and equipment on our exchange server (hybrid mode for now). In the tests, a user made a reservation in their calendar and chose a room. The room calendar would update with the meeting and only the meeting organizer could delete the meeting directly on the room calendar.
Now anyone can go to the venue’s calendar and view it (which is ok for me) but they can also delete a booking.
Therefore, I would like to prohibit the deletion of room bookings on the room calendar except by the meeting organizer.
How to do it?
Thanks a lot.
Guillaume P.
Hello, we have just put into production the provision of rooms and equipment on our exchange server (hybrid mode for now). In the tests, a user made a reservation in their calendar and chose a room. The room calendar would update with the meeting and only the meeting organizer could delete the meeting directly on the room calendar.Now anyone can go to the venue’s calendar and view it (which is ok for me) but they can also delete a booking.Therefore, I would like to prohibit the deletion of room bookings on the room calendar except by the meeting organizer.How to do it?Thanks a lot.Guillaume P. Read More
OneDrive app opens web version of OneDrive/differences menu “shared” OneDrive vs. Microsoft 365 app
Opening the OneDrive desktop app (Windows 11, Microsoft 365 Family account) opens a login window on the web for me. After signing in, the web version of OneDrive opens. In the background, the OneDrive app tries to do something that the app cannot do. A restart or a login of the app is requested. And the game starts all over again.
Is this a bug or does it have to be like this?
OneDrive and Microsoft 365 have a different “shared” menu. I don’t understand why.
I have tried to document both points with a video.
Thank you very much for your feedback.
Best regards
Andreas
Opening the OneDrive desktop app (Windows 11, Microsoft 365 Family account) opens a login window on the web for me. After signing in, the web version of OneDrive opens. In the background, the OneDrive app tries to do something that the app cannot do. A restart or a login of the app is requested. And the game starts all over again.Is this a bug or does it have to be like this? OneDrive and Microsoft 365 have a different “shared” menu. I don’t understand why. I have tried to document both points with a video. Thank you very much for your feedback. Best regardsAndreas Read More
New 365 Admin portal showcases ‘Business Advisors’ that aren’t my company?
Hello
For years, we as partners have requested better tie ins to the Office 365 portal regarding support, but as it stands, we don’t even have permissions to change the customer’s Help Desk setting to redirect to us unless we log in directly as a Global Admin on their tenant. It’s not available via GDAP (nor DAP).
Now, I’ve logged in to setup a new customer’s tenant, and I’m greeted with this popup at the bottom of the screen prodding my customer to connect with some Business Advisor that is very likely not my organization.
What is the purpose of this pop-up and what is being done to connect it directly and solely to us, the selling partner instead of some other unknown partner? Moreso, how can it be turned off for all our customers?
The only consolation here is that it does nothing at all except take you to O365 support, yet another item Partners have requested for years that’s gone unfinished. All the customer gets after they spend their precious time entering all the details of their issue is that they need to contact us directly for support, which has been a horrible customer experience according to my customers.
So when will this all get resolved and what is the plan here for this new pop up?
Hello For years, we as partners have requested better tie ins to the Office 365 portal regarding support, but as it stands, we don’t even have permissions to change the customer’s Help Desk setting to redirect to us unless we log in directly as a Global Admin on their tenant. It’s not available via GDAP (nor DAP). Now, I’ve logged in to setup a new customer’s tenant, and I’m greeted with this popup at the bottom of the screen prodding my customer to connect with some Business Advisor that is very likely not my organization. What is the purpose of this pop-up and what is being done to connect it directly and solely to us, the selling partner instead of some other unknown partner? Moreso, how can it be turned off for all our customers?The only consolation here is that it does nothing at all except take you to O365 support, yet another item Partners have requested for years that’s gone unfinished. All the customer gets after they spend their precious time entering all the details of their issue is that they need to contact us directly for support, which has been a horrible customer experience according to my customers. So when will this all get resolved and what is the plan here for this new pop up? Read More
Inserting copied cells in one sheet without shifting cell references in another sheet
I have a master sheet with multiple entry rows and other sheets that reference cells in the master sheet. When I insert copied cells from another source into the master sheet and shift cells down, the references in the other sheets also shift down. I’m attempting to insert additional data in the master sheet without changing the other sheet references. I’ve tried both absolute and relative cell references in the other sheets with no luck. Also, copying values only doesn’t work because I need to shift content down on the master sheet.
I have a master sheet with multiple entry rows and other sheets that reference cells in the master sheet. When I insert copied cells from another source into the master sheet and shift cells down, the references in the other sheets also shift down. I’m attempting to insert additional data in the master sheet without changing the other sheet references. I’ve tried both absolute and relative cell references in the other sheets with no luck. Also, copying values only doesn’t work because I need to shift content down on the master sheet. Read More
Forms only appears in Excel when new book opened in MS365 but not from SharePoint
Hi,
Sorry not sure if this is the correct forum for this question…
I just wondering why Forms can be access from an Excel work book when opened from MS365 but, not when it’s opened from within SharePoint using the ‘New’ button??
This is opened from SharePoint
Open from MS365
Would this have anything to do where the Form and Data is stored when opened from MS365??
Hi,Sorry not sure if this is the correct forum for this question…I just wondering why Forms can be access from an Excel work book when opened from MS365 but, not when it’s opened from within SharePoint using the ‘New’ button??This is opened from SharePoint Open from MS365 Would this have anything to do where the Form and Data is stored when opened from MS365?? Read More